Increased DNA unwinding efficiency of bacteriophage T7 DNA helicase mutant protein 4A'/E348K

Non-tight and tight chemomechanical couplings of biomolecular motors under hindering loads

Biomolecular motors make use of free energy released from chemical reaction (typically ATP hydrolysis) to perform mechanical motion or work. An important issue is whether a molecular motor exhibits tight or non-tight chemomechanical (CM) coupling. The tight CM coupling refers to that each ATPase activity is coupled with a mechanical step, while the non-tight CM coupling refers to that an ATPase activity is not necessarily coupled with a mechanical step. Here, we take kinesin, monomeric DNA helicase, ring-shaped hexameric DNA helicase and ribosome as examples to study this issue. Our studies indicate that some motors such as kinesin, monomeric helicase and ribosome exhibit non-tight CM coupling under hindering forces, while others such as the ring-shaped hexameric helicase exhibit tight or nearly tight CM coupling under any force. For the former, the reduction of the velocity caused by the hindering force arises mainly from the reduction of the CM coupling efficiency, while the ATPase rate is independent or nearly independent of the force. For the latter, the reduction of the velocity caused by the hindering force arises mainly from the reduction of the ATPase rate, while the CM coupling efficiency is independent or nearly independent of the force.

Residues in the central beta-hairpin of the DNA helicase of bacteriophage T7 are important in DNA unwinding

The ring-shaped helicase of bacteriophage T7 (gp4), the product of gene 4, has basic beta-hairpin loops lining its central core where they are postulated to be the major sites of DNA interaction. We have altered multiple residues within the beta-hairpin loop to determine their role during dTTPase-driven DNA unwinding. Residues His-465, Leu-466, and Asn-468 are essential for both DNA unwinding and DNA synthesis mediated by T7 DNA polymerase during leading-strand DNA synthesis. Gp4-K467A, gp4-K471A, and gp4-K473A form fewer hexamers than heptamers compared to wild-type helicase and alone are deficient in DNA unwinding. However, they complement for the growth of T7 bacteriophage lacking gene 4. Single-molecule studies show that these three altered helicases support rates of leading-strand DNA synthesis comparable to that observed with wild-type gp4. Gp4-K467A, devoid of unwinding activity alone, supports leading-strand synthesis in the presence of T7 DNA polymerase. We propose that DNA polymerase limits the backward movement of the helicase during unwinding as well as assisting the forward movement necessary for strand separation.

On translocation mechanism of ring-shaped helicase along single-stranded DNA

The ring-shaped helicases represent one important group of helicases that can translocate along single-stranded (ss) DNA and unwinding double-stranded (ds) DNA by using the energy derived from NTP binding and hydrolysis. Despite intensive studies, the mechanism by which the ring-shaped helicase translocates along ssDNA and unwinds dsDNA remains undetermined. In order to understand their chemomechanical-coupling mechanism, two models on NTPase activities of the hexamers in the presence of DNA have been studied here. One model is assumed that, of the six nucleotide-binding sites, three are noncatalytic and three are catalytic. The other model is assumed that all the six nucleotide-binding sites are catalytic. In terms of the sequential NTPase activity around the ring and the previous determined crystal structure of bacteriophage T7 helicase it is shown that the obtained mechanical behaviors such as the ssDNA-translocation size and DNA-unwinding size per dTTPase cycle using the former model are in good quantitative agreement with the previous experimental results for T7 helicase. Moreover, the acceleration of DNA unwinding rate with the stimulation of DNA synthesis by DNA polymerase can also be well explained by using the former model. In contrast, the ssDNA-translocation size and DNA-unwinding size per dTTPase cycle obtained by using the latter model are not consistent with the experimental results for T7 helicase. Thus it is preferred that the former model is the appropriate one for the T7 helicase. Furthermore, using the former model some dynamic behaviors such as the rotational speeds of DNA relative to the T7 helicase when translocation along ssDNA and when unwinding dsDNA have been predicted, which are expected to test in order to further verify the model.

Mechanisms of a ring shaped helicase

Bacteriophage T7 helicase (T7 gene 4 helicase-primase) is a prototypical member of the ring-shaped family of helicases, whose structure and biochemical mechanisms have been studied in detail. T7 helicase assembles into a homohexameric ring that binds single-stranded DNA in its central channel. Using RecA-type nucleotide binding and sensing motifs, T7 helicase binds and hydrolyzes several NTPs, among which dTTP supports optimal protein assembly, DNA binding and unwinding activities. During translocation along single stranded DNA, the subunits of the ring go through dTTP hydrolysis cycles one at a time, and this probably occurs also during DNA unwinding. Interestingly, the unwinding speed of T7 helicase is an order of magnitude slower than its translocation rate along single stranded DNA. The slow unwinding rate is greatly stimulated when DNA synthesis by T7 DNA polymerase is coupled to DNA unwinding. Using the T7 helicase as an example, we highlight critical findings and discuss possible mechanisms of helicase action.

Measurement of steady-state kinetic parameters for DNA unwinding by the bacteriophage T4 Dda helicase: use of peptide nucleic acids to trap single-stranded DNA products of helicase reactions

Measurement of steady-state rates of unwinding of double-stranded oligonucleotides by helicases is hampered due to rapid reannealing of the single-stranded DNA products. Including an oligonucleotide in the reaction mixture which can hybridize with one of the single strands can prevent reannealing. However, helicases bind to single-stranded DNA, therefore the additional oligonucleotide can sequester the enzyme, leading to slower observed rates for unwinding. To circumvent this problem, the oligonucleotide that serves as a trap was replaced with a strand of peptide nucleic acid (PNA). Fluorescence polarization was used to determine that a 15mer PNA strand does not bind to the bacteriophage T4 Dda helicase. Steady-state kinetic parameters of unwinding catalyzed by Dda were determined by using PNA as a trapping strand. The substrate consisted of a partial duplex with 15 nt of single-stranded DNA and 15 bp. In the presence of 250 nM substrate and 1 nM Dda, the rate of unwinding in the presence of the DNA trapping strand was 0.30 nM s(-1) whereas the rate was 1.34 nM s(-1) in the presence of the PNA trapping strand. PNA prevents reannealing of single-stranded DNA products, but does not sequester the helicase. This assay will prove useful in defining the complete kinetic mechanism for unwinding of oligonucleotide substrates by this helicase.

Structure and function of hexameric helicases

Helicases are motor proteins that couple the hydrolysis of nucleoside triphosphate (NTPase) to nucleic acid unwinding. The hexameric helicases have a characteristic ring-shaped structure, and all, except the eukaryotic minichromosomal maintenance (MCM) helicase, are homohexamers. Most of the 12 known hexameric helicases play a role in DNA replication, recombination, and transcription. A human genetic disorder, Bloom's syndrome, is associated with a defect in one member of the class of hexameric helicases. Significant progress has been made in understanding the biochemical properties, structures, and interactions of these helicases with DNA and nucleotides. Cooperativity in nucleotide binding was observed in many, and sequential NTPase catalysis has been observed in two proteins, gp4 of bacteriophage T7 and rho of Escherichia coli. The crystal structures of the oligomeric T7 gp4 helicase and the hexamer of RepA helicase show structural features that substantiate the observed cooperativity, and both are consistent with nucleotide binding at the subunit interface. Models are presented that show how sequential NTP hydrolysis can lead to unidirectional and processive translocation. Possible unwinding mechanisms based on the DNA exclusion model are proposed here, termed the wedge, torsional, and helix-destabilizing models.

A ring-opening mechanism for DNA binding in the central channel of the T7 helicase-primase protein

We have investigated the mechanism of binding single-stranded DNA (ssDNA) into the central channel of the ring-shaped T7 gp4A' helicase-primase hexamer. Presteady-state kinetic studies show a facilitated five-step mechanism and provide understanding of how a ring-shaped helicase can be loaded on the DNA during the initiation of replication. The effect of a primase recognition sequence on the observed kinetics suggests that binding to the helicase DNA-binding site is facilitated by transient binding to the primase DNA-binding site, which is proposed to be a loading site. The proposed model involves the fast initial binding of the DNA to the primase site on the outside of the helicase ring, a fast conformational change, a ring-opening step, migration of the DNA into the central channel of the helicase ring, and ring closure. Although an intermediate protein-DNA complex is kinetically stable, only the last species in the five-step mechanism is poised to function as a helicase at the unwinding junction.

Interaction of bacteriophage T7 gene 4 primase with its template recognition site

The primase fragment of the bacteriophage T7 63-kDa gene 4 helicase/primase protein contains the 271 N-terminal amino acid residues and lacks helicase activity. The primase fragment catalyzes the synthesis of oligoribonucleotides at rates similar to those catalyzed by the full-length protein in the presence of a 5-nucleotide DNA template containing a primase recognition site (5'-GGGTC-3', 5'-TGGTC-3', 5'-GTGTC-3', or 5'-TTGTC-3'). Although it is not copied into the oligoribonucleotides, the cytosine at the 3'-position is essential for synthesis and template binding. Two nucleotides flanking the 3'-end of the recognition site are required for tight DNA binding and rapid oligoribonucleotide synthesis. Nucleotides added to the 5'-end have no effect on the rate of oligoribonucleotide synthesis or the affinity of the primase for DNA. The binding of either ATP or CTP significantly increases the affinity of the primase for its DNA template. DNA lacking a primase recognition site does not inhibit oligoribonucleotide synthesis, suggesting that the primase binds DNA in a sequence-specific manner. The affinity of the primase for templates is weak, ranging from 10 to 150 microM. The tight DNA binding (<1 microM) observed with the 63-kDa gene 4 protein occurs via interactions between DNA templates and the helicase domain.

Interaction of ribonucleoside triphosphates with the gene 4 primase of bacteriophage T7

The primase fragment of bacteriophage T7 gene 4 protein catalyzes the synthesis of oligoribonucleotides in the presence of ATP, CTP, Mg(2+) (or Mn(2+)), and DNA containing a primase recognition site. During chain initiation, ATP binds with a K(m) of 0.32 mM, and CTP binds with a K(m) of 0.85 mM. Synthesis of the dinucleotides proceeds at a rate of 3.8/s. The dinucleotide either dissociates or is extended to a tetranucleotide. The primase preferentially inserts ribonucleotides forming Watson-Crick base pairs with the DNA template >200-fold more rapidly than other ribo- or deoxynucleotides. 3'-dCTP binds the primase with a similar affinity as CTP and is incorporated as a chain terminator at a rate (1)/(100) that of CTP. ATP analogues alpha,beta-methylene ATP, beta,gamma-methylene ATP, and beta,gamma-imido ATP are incorporated by the primase fragment at the 5'-ends of the oligoribonucleotides but not at the 3'-ends. A model is presented in which the primase fragment utilizes two nucleotide-binding sites, one for the initiating ATP and one for the nucleoside triphosphate which elongates the primer on the 3'-end. The initiation site binds ATP or oligoribonucleotides, whereas the elongation site binds ATP or CTP as directed by the template.