Protein splicing in the absence of an intein penultimate histidine

Molecular docking and MD simulations reveal protease inhibitors block the catalytic residues in Prp8 intein of Aspergillus fumigatus: a potential target for antimycotics

Resistance to azoles and amphotericin B especially in Aspergillus fumigatus is a growing concern towards the treatment of invasive fungal infection. At this critical juncture, intein splicing would be a productive, and innovative target to establish therapies against resistant strains. Intein splicing is the central event for the activation of host protein, essential for the growth and survival of various microorganisms including A. fumigatus. The splicing process is a four-step protease-like nucleophilic cascade. Thus, we hypothesise that protease inhibitors would successfully halt intein splicing and potentially restrict the growth of the aforementioned pathogen. Using Rosetta Fold and molecular dynamics simulations, we modelled Prp8 intein structure; resembling classic intein fold with horse shoe shaped splicing domain. To fully comprehend the active site of Afu Prp8 intein, C1, T62, H65, H818, N819 from intein sequences and S820, the first C-extein residue are selected. Molecular docking shows that two FDA-approved drugs, i.e. Lufotrelvir and Remdesivir triphosphate efficiently interact with Prp8 intein from the assortment of 212 protease inhibitors. MD simulation portrayed that Prp8 undergoes conformational change upon ligand binding, and inferred the molecular recognition and stability of the docked complexes. Per-residue decomposition analysis confirms the importance of F: block R802, V803, and Q807 binding pocket in intein splicing domain towards recognition of inhibitors, along with active site residues through strong hydrogen bonds and hydrophobic contacts. However, in vitro and in vivo assays are required to confirm the inhibitory action on Prp8 intein splicing; which may pave the way for the development of new antifungals for A. fumigatus.Communicated by Ramaswamy H. Sarma.

Structural and Biochemical Investigation of Class I Ribonucleotide Reductase from the Hyperthermophile Aquifex aeolicus

Ribonucleotide reductase (RNR) is an essential enzyme with a complex mechanism of allosteric regulation found in nearly all living organisms. Class I RNRs are composed of two proteins, a large α-subunit (R1) and a smaller β-subunit (R2) that exist as homodimers, that combine to form an active heterotetramer. Aquifex aeolicus is a hyperthermophilic bacterium with an unusual RNR encoding a 346-residue intein in the DNA sequence encoding its R2 subunit. We present the first structures of the A. aeolicus R1 and R2 (AaR1 and AaR2, respectively) proteins as well as the biophysical and biochemical characterization of active and inactive A. aeolicus RNR. While the active oligomeric state and activity regulation of A. aeolicus RNR are similar to those of other characterized RNRs, the X-ray crystal structures also reveal distinct features and adaptations. Specifically, AaR1 contains a β-hairpin hook structure at the dimer interface, which has an interesting π-stacking interaction absent in other members of the NrdAh subclass, and its ATP cone houses two ATP molecules. We determined structures of two AaR2 proteins: one purified from a construct lacking the intein (AaR2) and a second purified from a construct including the intein sequence (AaR2_genomic). These structures in the context of metal content analysis and activity data indicate that AaR2_genomic displays much higher iron occupancy and activity compared to AaR2, suggesting that the intein is important for facilitating complete iron incorporation, particularly in the Fe2 site of the mature R2 protein, which may be important for the survival of A. aeolicus in low-oxygen environments.

The Convergence of the Hedgehog/Intein Fold in Different Protein Splicing Mechanisms

Protein splicing catalyzed by inteins utilizes many different combinations of amino-acid types at active sites. Inteins have been classified into three classes based on their characteristic sequences. We investigated the structural basis of the protein splicing mechanism of class 3 inteins by determining crystal structures of variants of a class 3 intein from Mycobacterium chimaera and molecular dynamics simulations, which suggested that the class 3 intein utilizes a different splicing mechanism from that of class 1 and 2 inteins. The class 3 intein uses a bond cleavage strategy reminiscent of proteases but share the same Hedgehog/INTein (HINT) fold of other intein classes. Engineering of class 3 inteins from a class 1 intein indicated that a class 3 intein would unlikely evolve directly from a class 1 or 2 intein. The HINT fold appears as structural and functional solution for trans-peptidyl and trans-esterification reactions commonly exploited by diverse mechanisms using different combinations of amino-acid types for the active-site residues.

An Atypical Mechanism of Split Intein Molecular Recognition and Folding

Split inteins associate to trigger protein splicing in trans, a post-translational modification in which protein sequences fused to the intein pair are ligated together in a traceless manner. Recently, a family of naturally split inteins has been identified that is split at a noncanonical location in the primary sequence. These atypically split inteins show considerable promise in protein engineering applications; however, the mechanism by which they associate is unclear and must be different from that of previously characterized canonically split inteins due to unique topological restrictions. Here, we use a consensus design strategy to generate an atypical split intein pair (Cat) that has greatly improved activity and is amenable to detailed biochemical and biophysical analysis. Guided by the solution structure of Cat, we show that the association of the fragments involves a disorder-to-order structural transition driven by hydrophobic interactions. This molecular recognition mechanism satisfies the topological constraints of the intein fold and, importantly, ensures that premature chemistry does not occur prior to fragment complementation. Our data lead a common blueprint for split intein complementation in which localized structural rearrangements are used to drive folding and regulate protein-splicing activity.

Structural Insights into Subunits Assembly and the Oxyester Splicing Mechanism of Neq pol Split Intein

Split inteins are expressed as two separated subunits (N-intein and C-intein) fused to the corresponding exteins. The specific association of both intein subunits precedes protein splicing, which results in excision of the intein subunits and in ligation, by a peptide bond, of the concomitant exteins. Catalytically active intein precursors are typically too reactive for crystallization or even isolation. Neq pol is the trans-intein of the B-type DNA polymerase I split gene from hyperthermophile Nanoarchaeum equitans. We have determined the crystal structures of both the isolated NeqN and the complex of NeqN and NeqC subunits carrying the wild-type sequences, including the essential catalytic residues Ser1 and Thr+1, in addition to seven and three residues of the N- and C-exteins, respectively. These structures provide detailed information on the unique oxyester chemistry of the splicing mechanism of Neq pol and of the extensive rearrangements that occur in NeqN during the association step.

Coordination of the third step of protein splicing in two cyanobacterial inteins

The third step of protein splicing is cyclization of Asn coupled to peptide bond cleavage. In two related cyanobacterial inteins, this step is facilitated by Asn or Gln. For a Synechococcus sp. PCC7002 intein, the isolated third step of protein splicing is more efficient with its native Asn than with substitution to Gln. For a Trichodesmium erythraeum intein, its native Gln facilitates the third step as efficiently as with Asn. Despite these differences, the yield of splicing is not affected, suggesting that the third step is influenced by mechanism-linked conformational changes. A conserved catalytic His and the penultimate residue also play roles in promoting side-chain cyclization.

Mycobacteriophages as Incubators for Intein Dissemination and Evolution

Inteins are self-splicing protein elements that are mobile at the DNA level and are sporadically distributed across microbial genomes. Inteins appear to be horizontally transferred, and it has been speculated that phages may play a role in intein distribution. Our attention turns to mycobacteriophages, which infect mycobacteria, where both phage and host harbor inteins. Using bioinformatics, mycobacteriophage genomes were mined for inteins. This study reveals that these mobile elements are present across multiple mycobacteriophage clusters and are pervasive in certain genes, like the large terminase subunit TerL and a RecB-like nuclease, with the majority of intein-containing genes being phage specific. Strikingly, despite this phage specificity, inteins localize to functional motifs shared with bacteria, such that intein-containing genes have similar roles, like hydrolase activity and nucleic acid binding, indicating a global commonality among intein-hosting proteins. Additionally, there are multiple insertion points within active centers, implying independent invasion events, with regulatory implications. Several phage inteins were shown to be splicing competent and to encode functional homing endonucleases, important for mobility. Further, bioinformatic analysis supports the potential for phages as facilitators of intein movement among mycobacteria and related genera. Analysis of catalytic intein residues finds the highly conserved penultimate histidine inconsistently maintained among mycobacteriophages. Biochemical characterization of a noncanonical phage intein shows that this residue influences precursor accumulation, suggesting that splicing has been tuned in phages to modulate generation of important proteins. Together, this work expands our understanding of phage-based intein dissemination and evolution and implies that phages provide a context for evolution of splicing-based regulation.

Inteins are mobile protein splicing elements found in critical genes across all domains of life. Mycobacterial inteins are of particular interest because of their occurrence in pathogenic species, such as Mycobacterium tuberculosis and Mycobacterium leprae, which harbor inteins in important proteins. We have discovered a similarity in activities of intein-containing proteins among mycobacteriophages and their intein-rich actinobacterial hosts, with implications for both posttranslational regulation by inteins and phages participating in horizontal intein transfer. Our demonstration of multiple insertion points within active centers of phage proteins implies independent invasion events, indicating the importance of intein maintenance at specific functional sites. The variable conservation of a catalytic splicing residue, leading to profoundly altered splicing rates, points to the regulatory potential of inteins and to mycobacteriophages playing a role in intein evolution. Collectively, these results suggest inteins as posttranslational regulators and mycobacteriophages as both vehicles for intein distribution and incubators for intein evolution.

Conserved residues that modulate protein trans-splicing of Npu DnaE split intein

The first crystal trans-structure of a naturally occurring split intein has been determined for the Npu (Nostoc punctiforme PCC73102) DnaE split intein. Guided by this structure, the residues NArg50 and CSer35, well conserved in DnaE split inteins, are identified to be critical in the trans-splicing of Npu DnaE split intein. An in vitro splicing assay demonstrates that NArg50 and CSer35 play synergistic roles in modulating its intein activity. The C-terminal CAsn36 exhibits two orientations of its side chain and interacts with both NArg50 and CSer35 through hydrogen bonding. These interactions likely facilitate the cyclization of asparagine in the course of protein splicing. The mutation of either residue reduces intein activity, and correlates with the low activity of the Ssp (Cyanobacterium synechocystis sp. strain PCC6803) DnaE split intein. On the other hand, NArg50 also forms a hydrogen bond with the highly conserved F-block CAsp17, thus influencing the N-S acyl shift during N-terminal cleavage. Sequence alignments show that residues NArg50 and CSer35 are rather conserved in those split inteins that lack a penultimate histidine residue. The conserved non-catalytic residues of split inteins modulate the efficiency of protein trans-splicing by hydrogen-bond interactions with the catalytic residues at the splice junction.

Structural and dynamical features of inteins and implications on protein splicing

Protein splicing is a posttranslational modification where intervening proteins (inteins) cleave themselves from larger precursor proteins and ligate their flanking polypeptides (exteins) through a multistep chemical reaction. First thought to be an anomaly found in only a few organisms, protein splicing by inteins has since been observed in microorganisms from all domains of life. Despite this broad phylogenetic distribution, all inteins share common structural features such as a horseshoe-like pseudo two-fold symmetric fold, several canonical sequence motifs, and similar splicing mechanisms. Intriguingly, the splicing efficiencies and substrate specificity of different inteins vary considerably, reflecting subtle changes in the chemical mechanism of splicing, linked to their local structure and dynamics. As intein chemistry has widespread use in protein chemistry, understanding the structural and dynamical aspects of inteins is crucial for intein engineering and the improvement of intein-based technologies.

Protein splicing: how inteins escape from precursor proteins

Inteins are nature's escape artists; they facilitate their excision from flanking polypeptides (exteins) concomitant with extein ligation to produce a mature host protein. Splicing requires sequential nucleophilic displacement reactions catalyzed by strategies similar to proteases and asparagine lyases. Inteins require precise reaction coordination rather than rapid turnover or tight substrate binding because they are single turnover enzymes with covalently linked substrates. This has allowed inteins to explore alternative mechanisms with different steps or to use different methods for activation and coordination of the steps. Pressing issues include understanding the underlying details of catalysis and how the splicing steps are controlled.

Inteins: Nature's Gift to Protein Chemists

Inteins are auto-processing domains found in organisms from all domains of life. These proteins carry out a process known as protein splicing, which is a multi-step biochemical reaction comprised of both the cleavage and formation of peptide bonds. While the endogenous substrates of protein splicing are specific essential proteins found in intein-containing host organisms, inteins are also functional in exogenous contexts and can be used to chemically manipulate virtually any polypeptide backbone. Given this, protein chemists have exploited various facets of intein reactivity to modify proteins in myriad ways for both basic biological research as well as potential therapeutic applications. Here, we review the intein field, first focusing on the biological context and phylogenetic diversity of inteins, followed by a description of intein structure and biochemical function. Finally, we discuss prevalent inteinbased technologies, focusing on their applications in chemical biology, followed by persistent caveats of intein chemistry and approaches to alleviate these shortcomings. The findings summarized herein describe two and a half decades of research, leading from a biochemical curiosity to the development of powerful protein engineering tools.

Internal disulfide bond acts as a switch for intein activity

Inteins are intervening polypeptides that catalyze their own removal from flanking exteins, concomitant to the ligation of the exteins. The intein that interrupts the DP2 (large) subunit of DNA polymerase II from Methanoculleus marisnigri (Mma) can promote protein splicing. However, protein splicing can be prevented or reduced by overexpression under nonreducing conditions because of the formation of a disulfide bond between two internal intein Cys residues. This redox sensitivity leads to differential activity in different strains of E. coli as well as in different cell compartments. The redox-dependent control of in vivo protein splicing in an intein derived from an anaerobe that can occupy multiple environments hints at a possible physiological role for protein splicing.

Extein residues play an intimate role in the rate-limiting step of protein trans-splicing

Split inteins play an important role in modern protein semisynthesis techniques. These naturally occurring protein splicing domains can be used for in vitro and in vivo protein modification, peptide and protein cyclization, segmental isotopic labeling, and the construction of biosensors. The most well-characterized family of split inteins, the cyanobacterial DnaE inteins, show particular promise, as many of these can splice proteins in less than 1 min. Despite this fact, the activity of these inteins is context-dependent: certain peptide sequences surrounding their ligation junction (called local N- and C-exteins) are strongly preferred, while other sequences cause a dramatic reduction in the splicing kinetics and yield. These sequence constraints limit the utility of inteins, and thus, a more detailed understanding of their participation in protein splicing is needed. Here we present a thorough kinetic analysis of the relationship between C-extein composition and split intein activity. The results of these experiments were used to guide structural and molecular dynamics studies, which revealed that the motions of catalytic residues are constrained by the second C-extein residue, likely forcing them into an active conformation that promotes rapid protein splicing. Together, our structural and functional studies also highlight a key region of the intein structure that can be re-engineered to increase intein promiscuity.

Unprecedented rates and efficiencies revealed for new natural split inteins from metagenomic sources

Inteins excise themselves out of precursor proteins by the protein splicing reaction and have emerged as valuable protein engineering tools in numerous and diverse biotechnological applications. Split inteins have recently attracted particular interest because of the opportunities associated with generating a protein from two separate polypeptides and with trans-cleavage applications made possible by split intein mutants. However, natural split inteins are rare and differ greatly in their usefulness with regard to the achievable rates and yields. Here we report the first functional characterization of new split inteins previously identified by bioinformatics from metagenomic sources. The N- and C-terminal fragments of the four inteins gp41-1, gp41-8, NrdJ-1, and IMPDH-1 were prepared as fusion constructs with model proteins. Upon incubation of complementary pairs, we observed trans-splicing reactions with unprecedented rates and yields for all four inteins. Furthermore, no side reactions were detectable, and the precursor constructs were consumed virtually quantitatively. The rate for the gp41-1 intein, the most active intein on all accounts, was k = 1.8 ± 0.5 × 10(-1) s(-1), which is ∼10-fold faster than the rate reported for the Npu DnaE intein and gives rise to completed reactions within 20-30 s. No cross-reactivity in exogenous combinations was observed. Using C1A mutants, all inteins were efficient in the C-terminal cleavage reaction, albeit at lower rates. C-terminal cleavage could be performed under a wide range of reaction conditions and also in the absence of native extein residues flanking the intein. Thus, these inteins hold great potential for splicing and cleavage applications.

Mechanism of C-terminal intein cleavage in protein splicing from QM/MM molecular dynamics simulations

Protein splicing is a post-translational process in which a biologically inactive protein is activated by the release of a segment denoted as an intein. The process involves four steps. In the third, the scission of the intein takes place after the cyclization of the last amino acid of the segment, an asparagine. Little is known about the chemical reaction necessary for this cyclization. Experiments demonstrate that two histidines (the penultimate amino acid of the intein, and a histidine located 10 amino acids upstream) are relevant in the cyclization of the asparagine. We have investigated the mechanism and determinants of reaction in the GyrA intein focusing on the requirements for asparagine activation for its cyclization. First, the influence that the protonation states of these two histidines have on the orientation of the asparagine side chain is investigated by means of molecular dynamics simulation. Molecular dynamics simulations using the CHARMM27 force field were carried out on the three possible protonation states for each of these two histidines. The results indicate that the only protonation state in which the conformation of the system is suitable for cyclization is when the penultimate histidine is fully protonated (positively charged), and the upstream histidine is in the His(ε) neutral tautomeric form. The free energy profile for the reaction in which the asparagine is activated by a proton transfer to the upstream histidine is presented, computed by hybrid quantum mechanics/molecular mechanics (QM/MM) umbrella sampling molecular dynamics at the SCCDFTB/CHARMM27 level of theory. The calculated free energy barrier for the reaction is 19.0 kcal mol(-1). B3LYP/6-31+G(d) QM/MM single-point calculations give a qualitatively a similar energy profile, although with somewhat higher energy barriers, in good agreement with the value derived from experiment of 25 kcal mol(-1) at 60 °C. QM/MM molecular dynamics simulations of the reactant, activated reactant and intermediate states highlight the importance of the Arg181-Val182-Asp183 segment in catalysing the reaction. Overall, the results indicate that nucleophilic activation of the asparagine for its cyclization by the upstream histidine acting as the base is a plausible mechanism for the C-terminal cleavage in protein splicing.

Protein trans-splicing as a protein ligation tool to study protein structure and function

Protein trans-splicing (PTS) exerted by split inteins is a protein ligation reaction which enables overcoming the barriers of conventional heterologous protein production. We provide an overview of the current state-of-the-art in split intein engineering, as well as the achievements of PTS technology in the realm of protein structure-function analyses, including incorporation of natural and artificial protein modifications, controllable protein reconstitution, segmental isotope labeling and protein cyclization. We further discuss factors crucial for the successful implementation of PTS in these protein engineering approaches, and speculate on necessary future endeavours to make PTS a universally applicable protein ligation tool.

Expanding the definition of class 3 inteins and their proposed phage origin

Inteins are the protein equivalent of introns. Their protein splicing activity is essential for the host protein's maturation and function. Inteins are grouped into three classes based on sequence signature and splicing mechanism. The sequence signature of the recently characterized class 3 inteins is a noncontiguous Trp-Cys-Thr (WCT) motif and the absence of the standard class 1 Cys¹ or Ser¹ N-terminal nucleophile. The intein N-terminal Cys¹ or Ser¹ residue is essential for splicing in class 1 inteins. The mycobacteriophage Catera Gp206, Nocardioides sp. strain JS614 TOPRIM, and Thermobifida fusca YX Tfu2914 inteins have a mixture of class 1 and class 3 motifs. They carry the class 3 Trp-Cys-Thr motif and have the standard class 1 N-terminal Ser¹ or Cys¹. This study determined which class the mycobacteriophage Catera Gp206 and Nocardioides sp. JS614 TOPRIM inteins belong to based on catalytic mechanism. The mycobacteriophage Catera Gp206 intein (starting with Ser¹) is a class 3 intein, and its Ser¹ residue is not required for splicing. Based on phylogenetic analysis, we propose that class 3 inteins arose from a single mutated intein that was spread by phage into predominantly helicase genes in various phages and their hosts.

Mutational analysis of splicing activities of ribonucleotide reductase α subunit protein from lytic bacteriophage P1201

A CP1201 RIR1 intein is found in the ribonucleotide reductase alpha subunit (RNR α subunit) protein of lytic bacteriophage P1201 from Corynebacterium glutamicum NCHU 87078. This intein can be over-expressed and spliced in Escherichia coli NovaBlue cells. Mutations of C539, the N-terminal residue of the C-extein in the CP1201 RIR1 protein, led to the changes of pattern and level of protein-splicing activities. A G392S variant was found to be a temperature-sensitive protein with complete splicing activity at 17 and 28°C but not at 37°C or higher. We also found that the cleavage at the CP1201 RIR1 intein C-terminus of the double mutant G392S/C539G was blocked, but other cleavage activities could be efficiently performed at 17°C. G392S/C539G variant possessed the properties of low-temperature-induced cleavage at the intein N-terminus.

Mechanism of protein splicing of the Pyrococcus abyssi lon protease intein

Protein splicing is a post-translational process by which an intervening polypeptide, the intein, excises itself from the flanking polypeptides, the exteins, coupled to ligation of the exteins. The lon protease of Pyrococcus abyssi (Pab) is interrupted by an intein. When over-expressed as a fusion protein in Escherichia coli, the Pab lon protease intein can promote efficient protein splicing. Mutations that block individual steps of splicing generally do not lead to unproductive side reactions, suggesting that the intein tightly coordinates the splicing process. The intein can splice, although it has Lys in place of the highly conserved penultimate His, and mutants of the intein in the C-terminal region lead to the accumulation of stable branched-ester intermediate.

Protein splicing of the three Pyrococcus abyssi ribonucleotide reductase inteins

An intein is a polypeptide that interrupts the functional domains of a protein, called the exteins. The intein can facilitate its own excision from the exteins, concomitant with the ligation of the exteins, in a process called protein splicing. The alpha subunit of the ribonucleotide reductase of the extreme thermophile Pyrococcus abyssi is interrupted by three inteins in separate insertion sites. Each intein can facilitate protein splicing when over-expressed in Escherichia coli, with affinity domains serving as the exteins. The influence of the N-terminal flanking residue on the efficiency of splicing is specific to each intein. Each intein has a different downstream nucleophilic residue, and cannot tolerate substitution to a residue of lesser or equal nucleophilicity. The influence of the conserved penultimate His also differs between the inteins.

Modeling protein splicing: reaction pathway for C-terminal splice and intein scission

Protein splicing is a post-translational process where a biologically inactive protein is activated after the release of a so-called intein domain. In spite of the importance of this type of process, the specific molecular mechanism for the catalysis is still uncertain. In this work, we present a computational study of one of the key steps in protein splicing: the release of the intein due to the cyclization of an asparagine, the last amino acid of the intein. Density functional theory (DFT) calculations using the B3LYP functional in conjunction with the polarizable continuum model (PCM) were used to study the main stationary points along various possible reaction pathways. The results are compared with other DFT functionals and the MP2 ab initio method. In the first part of this work, the Asn-Thr dipeptide is analyzed with the aim of determining the specific requirements for the activation of the intrinsically slow Asn cyclization. The results show that the nucleophilic activation of the Asn side chain by removing one of its proton decreases the free energy barrier by approximately 20 kcal/mol. A full pathway of the reaction was also characterized in a larger model, including two imidazole molecules and two water molecules. The proposed reaction mechanism consists of two main steps: Asn side chain activation by a proton transfer to one of the imidazole groups, and cleavage of the peptide bond upon protonation of its nitrogen atom by the other imidazole. The overall free energy barrier in solution was determined to be 29.3 kcal/mol, in reasonable agreement with the apparent experimental barrier in the enzyme. The proposed mechanism suggests that the penultimate histidine stabilizes the tetrahedral intermediate and protonates the nitrogen of the scissile peptide bond, while a second histidine (located 10 amino acids upstream) activates the Asn side chain by deprotonating it.

Sequence requirements for splicing by the Cne PRP8 intein

The dependence of protein splicing on conserved residues of the Cne PRP8 intein was assessed by alanine scanning mutagenesis in a foreign protein context. Corroboration was obtained for the involvement of residues at the splice junctions and of the conserved threonine and histidine of motif B. Five additional residues were identified as absolutely required for splicing. Variant W151A displayed premature C-terminal cleavage, not seen with other Cne PRP8 mutants. We propose a model whereby W151 acts to prevent premature C-terminal cleavage, favoring complete splicing as opposed to two disjointed cleavage events.

Protein splicing in cis and in trans

Intein-mediated protein splicing is a self-catalytic process in which the intervening intein sequence is removed from a precursor protein and the flanking extein segments are ligated with a native peptide bond. Splice junction proximal residues and internal residues within the intein direct these reactions. The identity of these residues varies in each intein, as groups of related residues populate conserved motifs. Although the basics of the four-step protein splicing pathway are known, mechanistic details are still unknown. Structural and kinetic analyses are beginning to shed some light. Several structures were reported for precursor proteins with mutations in catalytic residues, which stabilize the precursors for crystallographic study. Progress is being made despite limitations inherent in using mutated precursors. However, no uniform mechanism has emerged. Kinetic parameters were determined using conditional trans-splicing (splicing of split precursor fragments after intein reassembly). Several groups concluded that the rate of the initial acyl rearrangement step is rapid and Asn cyclization (step 3) is slow, suggesting that this latter step is rate limiting. Understanding the protein splicing pathway has allowed scientists to harness inteins for numerous applications.

Mechanism for intein C-terminal cleavage: a proposal from quantum mechanical calculations

Inteins are autocatalytic protein cleavage and splicing elements. A cysteine to alanine mutation at the N-terminal of inteins inhibits splicing and isolates the C-terminal cleavage reaction. Experiments indicate an enhanced C-terminal cleavage reaction rate upon decreasing the solution pH for the cleavage mutant, which cannot be explained by the existing mechanistic framework. We use intein crystal structure data and the information about conserved amino acids to perform semiempirical PM3 calculations followed by high-level density functional theory calculations in both gas phase and implicit solvent environments. Based on these calculations, we propose a detailed "low pH" mechanism for intein C-terminal cleavage. Water plays an important role in the proposed reaction mechanism, acting as an acid as well as a base. The protonation of the scissile peptide bond nitrogen by a hydronium ion is an important first step in the reaction. That step is followed by the attack of the C-terminal asparagine side chain on its carbonyl carbon, causing succinimide formation and simultaneous peptide bond cleavage. The computed reaction energy barrier in the gas phase is approximately 33 kcal/mol and reduces to approximately 25 kcal/mol in solution, close to the 21 kcal/mol experimentally observed at pH 6.0. This mechanism is consistent with the observed increase in C-terminal cleavage activity at low pH for the cleavage mutant of the Mycobacterium tuberculosis RecA mini-intein.

Crystal Structures of an Intein from the Split dnaE Gene of Synechocystis sp. PCC6803 Reveal the Catalytic Model Without the Penultimate Histidine and the Mechanism of Zinc Ion Inhibition of Protein Splicing

The first naturally occurring split intein was found in the dnaE gene of Synechocystis sp. PCC6803 and belongs to a subclass of inteins without a penultimate histidine residue. We describe two high-resolution crystal structures, one derived from an excised Ssp DnaE intein and the second from a splicing-deficient precursor protein. The X-ray structures indicate that His147 in the conserved block F activates the side-chain N(delta) atom of the intein C-terminal Asn159, leading to a nucleophilic attack on the peptide bond carbonyl carbon atom at the C-terminal splice site. In this process, Arg73 appears to stabilize the transition state by interacting with the carbonyl oxygen atom of the scissile bond. Arg73 also seems to substitute for the conserved penultimate histidine residue in the formation of an oxyanion hole, as previously identified in other inteins. The finding that the precursor structure contains a zinc ion chelating the highly conserved Cys160 and Asp140 reveals the structural basis of Zn2+-mediated inhibition of protein splicing. Furthermore, it is of interest to observe that the carbonyl carbon atom of Asn159 and N(eta) of Arg73 are 2.6 angstroms apart in the free intein structure and 10.6 angstroms apart in the precursor structure. The orientation change of the aromatic ring of Tyr-1 following the initial acyl shift may be a key switching event contributing to the alignment of Arg73 and the C-terminal scissile bond, and may explain the sequential reaction property of the Ssp DnaE intein.

Posttranslational protein modification in Archaea

One of the first hurdles to be negotiated in the postgenomic era involves the description of the entire protein content of the cell, the proteome. Such efforts are presently complicated by the various posttranslational modifications that proteins can experience, including glycosylation, lipid attachment, phosphorylation, methylation, disulfide bond formation, and proteolytic cleavage. Whereas these and other posttranslational protein modifications have been well characterized in Eucarya and Bacteria, posttranslational modification in Archaea has received far less attention. Although archaeal proteins can undergo posttranslational modifications reminiscent of what their eucaryal and bacterial counterparts experience, examination of archaeal posttranslational modification often reveals aspects not previously observed in the other two domains of life. In some cases, posttranslational modification allows a protein to survive the extreme conditions often encountered by Archaea. The various posttranslational modifications experienced by archaeal proteins, the molecular steps leading to these modifications, and the role played by posttranslational modification in Archaea form the focus of this review.

Kinetic Analysis of the Individual Steps of Protein Splicing for the Pyrococcus abyssi PolII Intein

Protein splicing involves the excision of an intervening polypeptide, the intein, from flanking polypeptides, the exteins, concomitant with the specific ligation of the exteins. The intein that interrupts the DNA polymerase II DP2 subunit in Pyrococcus abyssi can be overexpressed and purified as an unspliced precursor, which allows for a detailed in vitro kinetic analysis of the individual steps of protein splicing. The first order rate constant for splicing of this intein, which has a non-canonical Gln at its C terminus, is 9.3 x 10(-6) s(-1) at 60 degrees C. The rate constant for splicing increases 3-fold with substitution of Asn for the C-terminal Gln. The pseudo first order rate constant of dithiothreitol-dependent N-terminal cleavage is 1 x 10(-4) s(-1). The first order rate constant of C-terminal cleavage is 1.2 x 10(-5) s(-1) with Gln at the C-terminal position, 2.8 x 10(-4) s(-1) with Asn, and decreases significantly with mutation of the penultimate His of the intein to Ala. N-terminal cleavage is most efficient between pH 7 and 7.5 and decreases at both more acidic and alkaline pH values, whereas C-terminal cleavage and splicing are both efficient over a broader range of pH values.

Using protein-DNA chimeras to detect and count small numbers of molecules

We describe general methods to detect and quantify small numbers of specific molecules. We redirected self-splicing protein inteins to create 'tadpoles', chimeric molecules comprised of a protein head covalently coupled to an oligonucleotide tail. We made different classes of tadpoles that bind specific targets, including Bacillus anthracis protective antigen and the enzyme cofactor biotin. We measured the amount of bound target by quantifying DNA tails by T7 RNA polymerase runoff transcription and real-time polymerase chain reaction (PCR) evaluated by rigorous statistical methods. These assays had a dynamic range of detection of more than 11 orders of magnitude and distinguished numbers of molecules that differed by as little as 10%. At their low limit, these assays were used to detect as few as 6,400 protective antigen molecules, 600 biotin molecules and 150 biotinylated protein molecules. In crudely fractionated human serum, the assays were used to detect as few as 32,000 protective antigen molecules. Tadpoles thus enable sensitive detection and precise quantification of molecules other than DNA and RNA.

Synthetic Two-piece and Three-piece Split Inteins for Protein trans-Splicing

Inteins are protein-intervening sequences that can self-excise and concomitantly splice together the flanking polypeptides. Two-piece split inteins capable of protein trans-splicing have been found in nature and engineered in laboratories, but they all have a similar split site corresponding to the endonuclease domain of the intein. Can inteins be split at other sites and do trans-splicing? After testing 13 split sites engineered into a Ssp DnaB mini-intein, we report the finding of three new split sites that each produced a two-piece split intein capable of protein trans-splicing. These three functional split sites are located in different loop regions between beta-strands of the intein structure, and one of them is just 11 amino acids from the beginning of the intein. Because different inteins have similar structures and similar beta-strands, these new split sites may be generalized to other inteins. We have also demonstrated for the first time that a three-piece split intein could function in protein trans-splicing. These findings have implications for intein structure-function, evolution, and uses in biotechnology.

Protein splicing of a Pyrococcus abyssi intein with a C-terminal glutamine

Protein splicing involves the excision of an intervening polypeptide sequence, the intein, from a precursor protein and the concomitant ligation of the flanking polypeptides, the exteins, by a peptide bond. Most reported inteins have a C-terminal asparagine residue, and it has been shown that cyclization of this residue is coupled to peptide bond cleavage between the intein and C-extein. We show that the intein interrupting the DNA polymerase II DP2 subunit in Pyrococcus abyssi, which has a C-terminal glutamine, is capable of facilitating protein splicing. Substitution of an asparagine for the C-terminal glutamine moderately improves the rate and extent of protein splicing. However, substitution of an alanine for the penultimate histidine residue, with either asparagine or glutamine in the C-terminal position, prevents protein splicing and facilitates cleavage at the intein N terminus. The intein facilitates in vitro protein splicing only at temperatures above 30 degrees C and can be purified as a nonspliced precursor. This temperature dependence has enabled us to characterize the optimal in vitro splicing conditions and determine the rate constants for splicing as a function of temperature.

Expressed protein ligation

The introduction of noncanonical amino acids and biophysical probes into peptides and proteins, and total or segmental isotopic labelling has the potential to greatly aid the determination of protein structure, function and protein-protein interactions. To obtain a peptide as large as possible by solid-phase peptide synthesis, native chemical ligation was introduced to enable synthesis of proteins of up to 120 amino acids in length. After the discovery of inteins, with their self-splicing properties and their application in protein synthesis, the semisynthetic methodology, expressed protein ligation, was developed to circumvent size limitation problems. Today, diverse expression vectors are available that allow the production of N- and C-terminal fragments that are needed for ligation to produce large amounts and high purity protein(s) (protein alpha-thioesters and peptides or proteins with N-terminal Cys). Unfortunately, expressed protein ligation is still limited mainly by the requirement of a Cys residue. Of course, additional Cys residues can be introduced into the sequence by site directed mutagenesis or synthesis, however, those mutations may disturb protein structure and function. Recently, alternative ligation approaches have been developed that do not require Cys residues. Accordingly, it is theoretically possible to obtain each modified protein using ligation strategies.

Protein splicing of inteins with atypical glutamine and aspartate C-terminal residues

Inteins are protein-splicing domains present in many proteins. They self-catalyze their excision from the host protein, ligating their former flanks by a peptide bond. The C-terminal residue of inteins is typically an asparagine (Asn). Cyclization of this residue to succinimide causes the final detachment of inteins from their hosts. We studied protein-splicing activity of two inteins with atypical C-terminal residues. One having a C-terminal glutamine (Gln), isolated from Chilo iridescent virus (CIV), and another unique intein, first reported here, with a C-terminal aspartate, isolated from Carboxydothermus hydrogenoformans (Chy). Protein-splicing activity was examined in the wild-type inteins and in several mutants with N- and C-terminal amino acid substitutions. We demonstrate that both wild-type inteins can protein splice, probably by new variations of the typical protein-splicing mechanism. Substituting the atypical C-terminal residue to the typical Asn retained protein-splicing only in the CIV intein. All diverse C-terminal substitutions in the Chy intein (Asp(345) to Asn, Gln, Glu, and Ala) abolished protein-splicing and generated N- and C-terminal cleavage. The observed C-terminal cleavage in the Chy intein ending with Ala cannot be explained by cyclization of this residue. We present and discuss several new models for reactions in the protein-splicing pathway.

Crystal structure of a mini-intein reveals a conserved catalytic module involved in side chain cyclization of asparagine during protein splicing

We have determined the crystal structure of a 154-residue intein derived from the dnaB gene of Synechocystis sp. strain PCC6803 and refined it to a 2.0-A resolution. The x-ray structure suggests that this intein possesses two catalytic sites that appear to be separately responsible for splicing and cleavage of the N- and C-terminal scissile bonds. The conserved intein block F residues are the important components of a catalytic site for side chain cyclization of the last intein residue, Asn-154. The data suggest that the imidazole ring of His-143 is involved in the activation of the side chain Ndelta atom of Asn-154, leading to a nucleophilic attack on the carbonyl carbon of Asn-154. Substitution of His-143 with Ala or Gln resulted in the inhibition of C-terminal cleavage. His-153, Asp-136, and a water molecule appear to constitute an oxyanion binding site by contacting the carbonyl oxygen of Asn-154 to stabilize the transition state. The structure and mutagenesis data also support that the close contact between the hydroxyl groups of Thr-138 and Ser-155, whose side chain participates in an S --> O acyl shift, plays an important role in the nucleophile orientation. Our structural modeling suggests that this catalytic module is conserved in the C-terminal subdomains of inteins from diverse organisms.

The intein of the Thermoplasma A-ATPase A subunit: structure, evolution and expression in E. coli

BACKGROUND

Inteins are selfish genetic elements that excise themselves from the host protein during post translational processing, and religate the host protein with a peptide bond. In addition to this splicing activity, most reported inteins also contain an endonuclease domain that is important in intein propagation.

RESULTS

The gene encoding the Thermoplasma acidophilum A-ATPase catalytic subunit A is the only one in the entire T. acidophilum genome that has been identified to contain an intein. This intein is inserted in the same position as the inteins found in the ATPase A-subunits encoding gene in Pyrococcus abyssi, P. furiosus and P. horikoshii and is found 20 amino acids upstream of the intein in the homologous vma-1 gene in Saccharomyces cerevisiae. In contrast to the other inteins in catalytic ATPase subunits, the T. acidophilum intein does not contain an endonuclease domain.T. acidophilum has different codon usage frequencies as compared to Escherichia coli. Initially, the low abundance of rare tRNAs prevented expression of the T. acidophilum A-ATPase A subunit in E. coli. Using a strain of E. coli that expresses additional tRNAs for rare codons, the T. acidophilum A-ATPase A subunit was successfully expressed in E. coli.

CONCLUSIONS

Despite differences in pH and temperature between the E. coli and the T. acidophilum cytoplasms, the T. acidophilum intein retains efficient self-splicing activity when expressed in E. coli. The small intein in the Thermoplasma A-ATPase is closely related to the endonuclease containing intein in the Pyrococcus A-ATPase. Phylogenetic analyses suggest that this intein was horizontally transferred between Pyrococcus and Thermoplasma, and that the small intein has persisted in Thermoplasma apparently without homing.

Intein-mediated ligation and cyclization of expressed proteins

Protein splicing is a posttranslational processing event that releases an internal protein sequence from a protein precursor. During the splicing process the internal protein sequence, termed an intein, embedded in the protein precursor self-catalyzes its excision and the ligation of the flanking protein regions, termed exteins. The dissection of the splicing pathway, which involves the precise cleavage and formation of peptide bonds, and the identification of key catalytic residues at the splice junctions have led to the modulation of the protein splicing process as a protein engineering tool. Novel strategies have been developed to use intein-catalyzed reactions for the production and manipulation of proteins and peptides. These new approaches have broken down the size limitation barrier of chemical synthetic methods and are less technically demanding. The purpose of this article is to describe how to use self-splicing inteins in protein semisynthesis and backbone cyclization. The first two sections of the article provide a brief review of the distinct chemical steps that underlie protein splicing and intein enabled technology.

An alternative protein splicing mechanism for inteins lacking an N-terminal nucleophile

Variations in the intein-mediated protein splicing mechanism are becoming more apparent as polymorphisms in conserved catalytic residues are identified. The conserved Ser or Cys at the intein N-terminus and the conserved intein penultimate His are absent in the KlbA family of inteins. These inteins were predicted to be inactive, since an N-terminal Ala cannot perform the initial reaction of the standard protein splicing pathway to yield the requisite N-terminal splice junction (thio)ester. Despite the presence of an N-terminal Ala and a penultimate Ser, the KlbA inteins splice efficiently using an alternative protein splicing mechanism. In this non-canonical pathway, the C-extein nucleophile attacks a peptide bond at the N-terminal splice junction rather than a (thio)ester bond, alleviating the need to form the initial (thio)ester at the N-terminal splice junction. The remainder of the two pathways is the same: branch resolution by Asn cyclization is followed by an acyl rearrangement to form a native peptide bond between the ligated exteins.