Tryptophan 512 is sensitive to conformational changes in the rigid relay loop of smooth muscle myosin during the MgATPase cycle

X-ray Crystallographic and Molecular Dynamic Analyses of Drosophila melanogaster Embryonic Muscle Myosin Define Domains Responsible for Isoform-Specific Properties

Drosophila melanogaster is a powerful system for characterizing alternative myosin isoforms and modeling muscle diseases, but high-resolution structures of fruit fly contractile proteins have not been determined. Here we report the first x-ray crystal structure of an insect myosin: the D melanogaster skeletal muscle myosin II embryonic isoform (EMB). Using our system for recombinant expression of myosin heavy chain (MHC) proteins in whole transgenic flies, we prepared and crystallized stable proteolytic S1-like fragments containing the entire EMB motor domain bound to an essential light chain. We solved the x-ray crystal structure by molecular replacement and refined the resulting model against diffraction data to 2.2 Å resolution. The protein is captured in two slightly different renditions of the rigor-like conformation with a citrate of crystallization at the nucleotide binding site and exhibits structural features common to myosins of diverse classes from all kingdoms of life. All atom molecular dynamics simulations on EMB in its nucleotide-free state and a derivative homology model containing 61 amino acid substitutions unique to the indirect flight muscle isoform (IFI) suggest that differences in the identity of residues within the relay and the converter that are encoded for by MHC alternative exons 9 and 11, respectively, directly contribute to increased mobility of these regions in IFI relative to EMB. This suggests the possibility that alternative folding or conformational stability within these regions contribute to the observed functional differences in Drosophila EMB and IFI myosins.

The ATPase mechanism of UvrA2 reveals the distinct roles of proximal and distal ATPase sites in nucleotide excision repair

The UvrA₂ dimer finds lesions in DNA and initiates nucleotide excision repair. Each UvrA monomer contains two essential ATPase sites: proximal (P) and distal (D). The manner whereby their activities enable UvrA₂ damage sensing and response remains to be clarified. We report three key findings from the first pre-steady state kinetic analysis of each site. Absent DNA, a P_2ATP-D_2ADP species accumulates when the low-affinity proximal sites bind ATP and enable rapid ATP hydrolysis and phosphate release by the high-affinity distal sites, and ADP release limits catalytic turnover. Native DNA stimulates ATP hydrolysis by all four sites, causing UvrA₂ to transition through a different species, P_2ADP-D_2ADP. Lesion-containing DNA changes the mechanism again, suppressing ATP hydrolysis by the proximal sites while distal sites cycle through hydrolysis and ADP release, to populate proximal ATP-bound species, P_2ATP-D_empty and P_2ATP-D_2ATP. Thus, damaged and native DNA trigger distinct ATPase site activities, which could explain why UvrA₂ forms stable complexes with UvrB on damaged DNA compared with weaker, more dynamic complexes on native DNA. Such specific coupling between the DNA substrate and the ATPase mechanism of each site provides new insights into how UvrA₂ utilizes ATP for lesion search, recognition and repair.

Conformational rearrangements of the C1 ring in KaiC measure the timing of assembly with KaiB

KaiC, the core oscillator of the cyanobacterial circadian clock, is composed of an N-terminal C1 domain and a C-terminal C2 domain, and assembles into a double-ring hexamer upon ATP binding. Cyclic phosphorylation and dephosphorylation at Ser431 and Thr432 in the C2 domain proceed with a period of approximately 24 h in the presence of other clock proteins, KaiA and KaiB, but recent studies have revealed a crucial role for the C1 ring in determining the cycle period. In this study, we mapped dynamic structural changes of the C1 ring in solution using a combination of site-directed tryptophan mutagenesis and fluorescence spectroscopy. We found that the C1 ring undergoes a structural transition, coupled with ATPase activity and the phosphorylation state, while maintaining its hexameric ring structure. This transition triggered by ATP hydrolysis in the C1 ring in specific phosphorylation states is a necessary event for recruitment of KaiB, limiting the overall rate of slow complex formation. Our results provide structural and kinetic insights into the C1-ring rearrangements governing the slow dynamics of the cyanobacterial circadian clock.

Graded effects of unregulated smooth muscle myosin on intestinal architecture, intestinal motility and vascular function in zebrafish

Smooth muscle contraction is controlled by the regulated activity of the myosin heavy chain ATPase (Myh11). Myh11 mutations have diverse effects in the cardiovascular, digestive and genitourinary systems in humans and animal models. We previously reported a recessive missense mutation, meltdown (mlt), which converts a highly conserved tryptophan to arginine (W512R) in the rigid relay loop of zebrafish Myh11. The mlt mutation disrupts myosin regulation and non-autonomously induces invasive expansion of the intestinal epithelium. Here, we report two newly identified missense mutations in the switch-1 (S237Y) and coil-coiled (L1287M) domains of Myh11 that fail to complement mlt Cell invasion was not detected in either homozygous mutant but could be induced by oxidative stress and activation of oncogenic signaling pathways. The smooth muscle defect imparted by the mlt and S237Y mutations also delayed intestinal transit, and altered vascular function, as measured by blood flow in the dorsal aorta. The cell-invasion phenotype induced by the three myh11 mutants correlated with the degree of myosin deregulation. These findings suggest that the vertebrate intestinal epithelium is tuned to the physical state of the surrounding stroma, which, in turn, governs its response to physiologic and pathologic stimuli. Genetic variants that alter the regulation of smooth muscle myosin might be risk factors for diseases affecting the intestine, vasculature, and other tissues that contain smooth muscle or contractile cells that express smooth muscle proteins, particularly in the setting of redox stress.

Mapping the ATP binding site in the plasma membrane H(+)-ATPase from Kluyveromyces lactis

The plasma membrane H(+)-ATPase from Kluyveromyces lactis contains 14 tryptophan residues. Binding a nucleotide or unfolding with Gnd-HCl quenched intrinsic fluorescence by ≈60% suggesting that in the H(+)-ATPase-Nucleotide complex there is solvent-mediated collisional quenching of W505 fluorescence. N-bromosuccinimide (NBS) treatment of H(+)-ATPase modified a single W residue in both native and Gnd-HCl-unfolded H(+)-ATPase. Denaturing the H(+)-ATPase with 1% SDS led to expose six tryptophan residues while requiring 17 NBS/H(+)-ATPase. The remaining eight tryptophan residues kept buried indicating a highly stable TM domain. Acrylamide generated static quenching of fluorescence; partial in the native enzyme (V = 0.43 M(-1)) and complete in the Gnd-HCl-unfolded H(+)-ATPase (V = 0.81 M(-1)). Collisional quenching (K sv) increased from 3.12 to 7.45 M(-1) upon H(+)-ATPase unfolding. W505 fluorescence titration with NBS yielded a molar ratio of 6 NBS/H(+)-ATPase and quenched ≈ 60% fluorescence. In the recombinant N-domain, the distance between W505 and MantATP was estimated to be 21 Å by FRET. The amino acid residues involved in nucleotide binding were identified by N-domain molecular modelling and docking with ATP. In the N-domain/ATP complex model, the distance between W505 and ATP was 20.5 Å. ATP binding leads to a conformational change in the N-domain of H(+)-ATPase that exposes W505 to the environment.

Mapping interactions between myosin relay and converter domains that power muscle function

Intramolecular communication within myosin is essential for its function as motor, but the specific amino acid residue interactions required are unexplored within muscle cells. Using Drosophila melanogaster skeletal muscle myosin, we performed a novel in vivo molecular suppression analysis to define the importance of three relay loop amino acid residues (Ile(508), Asn(509), and Asp(511)) in communicating with converter domain residue Arg(759). We found that the N509K relay mutation suppressed defects in myosin ATPase, in vitro motility, myofibril stability, and muscle function associated with the R759E converter mutation. Through molecular modeling, we define a mechanism for this interaction and suggest why the I508K and D511K relay mutations fail to suppress R759E. Interestingly, I508K disabled motor function and myofibril assembly, suggesting that productive relay-converter interaction is essential for both processes. We conclude that the putative relay-converter interaction mediated by myosin residues 509 and 759 is critical for the biochemical and biophysical function of skeletal muscle myosin and the normal ultrastructural and mechanical properties of muscle.

Metal cation controls myosin and actomyosin kinetics

We have perturbed myosin nucleotide binding site with magnesium-, manganese-, or calcium-nucleotide complexes, using metal cation as a probe to examine the pathways of myosin ATPase in the presence of actin. We have used transient time-resolved FRET, myosin intrinsic fluorescence, fluorescence of pyrene labeled actin, combined with the steady state myosin ATPase activity measurements of previously characterized D.discoideum myosin construct A639C:K498C. We found that actin activation of myosin ATPase does not depend on metal cation, regardless of the cation-specific kinetics of nucleotide binding and dissociation. The rate limiting step of myosin ATPase depends on the metal cation. The rate of the recovery stroke and the reverse recovery stroke is directly proportional to the ionic radius of the cation. The rate of nucleotide release from myosin and actomyosin, and ATP binding to actomyosin depends on the cation coordination number.

Human Tonic and Phasic Smooth Muscle Myosin Isoforms Are Unresponsive to the Loop 1 Insert

Smooth muscle myosin gene products include two isoforms, SMA and SMB, differing by a 7-residue peptide in loop 1 (i7) at the myosin active site where ATP is hydrolyzed. Using chicken isoforms, previous work indicated that the i7 deletion in SMA prolongs strong actin binding by inhibiting active site ingress and egress of nucleotide when compared to i7 inserted SMB. Additionally, i7 deletion inhibits Pi release associated with the switch 2 closed → open transition in actin-activated ATPase. Switch 2 is far from loop 1 indicating i7 deletion has an allosteric effect on Pi release. Chicken SMA and SMB have unknown and robust nucleotide-sensitive tryptophan (NST) fluorescence increments, respectively. Human SMA and SMB both lack NST increments while Pi release in Ca²⁺ ATPase is not impacted by i7 deletion. The NST reports relay helix movement following conformation change in switch 2 but in the open → closed transition. The NST is common to all known myosin isoforms except human smooth muscle. Other independent works on human SMA and SMB motility indicate no functional effect of i7 deletion. Smooth muscle myosin is a stunning example of species-specific myosin structure/function divergence underscoring the danger in extrapolating disease-linked mutant effects on myosin across species.

Switch II mutants reveal coupling between the nucleotide- and actin-binding regions in myosin V

Conserved active-site elements in myosins and other P-loop NTPases play critical roles in nucleotide binding and hydrolysis; however, the mechanisms of allosteric communication among these mechanoenzymes remain unresolved. In this work we introduced the E442A mutation, which abrogates a salt-bridge between switch I and switch II, and the G440A mutation, which abolishes a main-chain hydrogen bond associated with the interaction of switch II with the γ phosphate of ATP, into myosin V. We used fluorescence resonance energy transfer between mant-labeled nucleotides or IAEDANS-labeled actin and FlAsH-labeled myosin V to examine the conformation of the nucleotide- and actin-binding regions, respectively. We demonstrate that in the absence of actin, both the G440A and E442A mutants bind ATP with similar affinity and result in only minor alterations in the conformation of the nucleotide-binding pocket (NBP). In the presence of ADP and actin, both switch II mutants disrupt the formation of a closed NBP actomyosin.ADP state. The G440A mutant also prevents ATP-induced opening of the actin-binding cleft. Our results indicate that the switch II region is critical for stabilizing the closed NBP conformation in the presence of actin, and is essential for communication between the active site and actin-binding region.

Alternative relay and converter domains tune native muscle myosin isoform function in Drosophila

Myosin isoforms help define muscle-specific contractile and structural properties. Alternative splicing of myosin heavy chain gene transcripts in Drosophila melanogaster yields muscle-specific isoforms and highlights alternative domains that fine-tune myosin function. To gain insight into how native myosin is tuned, we expressed three embryonic myosin isoforms in indirect flight muscles lacking endogenous myosin. These isoforms differ in their relay and/or converter domains. We analyzed isoform-specific ATPase activities, in vitro actin motility and myofibril structure/stability. We find that dorsal acute body wall muscle myosin (EMB-9c11d) shows a significant increase in MgATPase V(max) and actin sliding velocity, as well as abnormal myofibril assembly compared to cardioblast myosin (EMB-11d). These properties differ as a result of alternative exon-9-encoded relay domains that are hypothesized to communicate signals among the ATP-binding pocket, actin-binding site and the converter domain. Further, EMB-11d shows significantly reduced levels of basal Ca- and MgATPase as well as MgATPase V(max) compared to embryonic body wall muscle isoform (EMB) (expressed in a multitude of body wall muscles). EMB-11d also induces increased actin sliding velocity and stabilizes myofibril structure compared to EMB. These differences arise from exon-11-encoded alternative converter domains that are proposed to reposition the lever arm during the power and recovery strokes. We conclude that relay and converter domains of native myosin isoforms fine-tune ATPase activity, actin motility and muscle ultrastructure. This verifies and extends previous studies with chimeric molecules and indicates that interactions of the relay and converter during the contractile cycle are key to myosin-isoform-specific kinetic and mechanical functions.

Switch I closure simultaneously promotes strong binding to actin and ADP in smooth muscle myosin

The motor protein myosin uses energy derived from ATP hydrolysis to produce force and motion. Important conserved components (P-loop, switch I, and switch II) help propagate small conformational changes at the active site into large scale conformational changes in distal regions of the protein. Structural and biochemical studies have indicated that switch I may be directly responsible for the reciprocal opening and closing of the actin and nucleotide-binding pockets during the ATPase cycle, thereby aiding in the coordination of these important substrate-binding sites. Smooth muscle myosin has displayed the ability to simultaneously bind tightly to both actin and ADP, although it is unclear how both substrate-binding clefts could be closed if they are rigidly coupled to switch I. Here we use single tryptophan mutants of smooth muscle myosin to determine how conformational changes in switch I are correlated with structural changes in the nucleotide and actin-binding clefts in the presence of actin and ADP. Our results suggest that a closed switch I conformation in the strongly bound actomyosin-ADP complex is responsible for maintaining tight nucleotide binding despite an open nucleotide-binding pocket. This unique state is likely to be crucial for prolonged tension maintenance in smooth muscle.

Fluorescence anisotropy and resonance energy transfer: powerful tools for measuring real time protein dynamics in a physiological environment

Fluorescence spectroscopy/microscopy is a versatile method for examining protein dynamics in vitro and in vivo that can be combined with other techniques to simultaneously examine complementary pharmacological parameters. The following review will highlight the advantages and challenges of using fluorescence spectroscopic methods for examining protein dynamics with a special emphasis on fluorescence resonance energy transfer and fluorescence anisotropy. Both of these methods are amenable to measurements on an ensemble of molecules as well as at the single molecule level, in live cells and in high throughput screening assays, providing a powerful set of tools to aid in the design and testing of new drugs under a variety of experimental conditions.

Mutating the converter-relay interface of Drosophila myosin perturbs ATPase activity, actin motility, myofibril stability and flight ability

We used an integrative approach to probe the significance of the interaction between the relay loop and converter domain of the myosin molecular motor from Drosophila melanogaster indirect flight muscle. During the myosin mechanochemical cycle, ATP-induced twisting of the relay loop is hypothesized to reposition the converter, resulting in cocking of the contiguous lever arm into the pre-power stroke configuration. The subsequent movement of the lever arm through its power stroke generates muscle contraction by causing myosin heads to pull on actin filaments. We generated a transgenic line expressing myosin with a mutation in the converter domain (R759E) at a site of relay loop interaction. Molecular modeling suggests that the interface between the relay loop and converter domain of R759E myosin would be significantly disrupted during the mechanochemical cycle. The mutation depressed calcium as well as basal and actin-activated MgATPase (V(max)) by approximately 60% compared to wild-type myosin, but there is no change in apparent actin affinity (K(m)). While ATP or AMP-PNP (adenylyl-imidodiphosphate) binding to wild-type myosin subfragment-1 enhanced tryptophan fluorescence by approximately 15% or approximately 8%, respectively, enhancement does not occur in the mutant. This suggests that the mutation reduces lever arm movement. The mutation decreases in vitro motility of actin filaments by approximately 35%. Mutant pupal indirect flight muscles display normal myofibril assembly, myofibril shape, and double-hexagonal arrangement of thick and thin filaments. Two-day-old fibers have occasional "cracking" of the crystal-like array of myofilaments. Fibers from 1-week-old adults show more severe cracking and frayed myofibrils with some disruption of the myofilament lattice. Flight ability is reduced in 2-day-old flies compared to wild-type controls, with no upward mobility but some horizontal flight. In 1-week-old adults, flight capability is lost. Thus, altered myosin function permits myofibril assembly, but results in a progressive disruption of the myofilament lattice and flight ability. We conclude that R759 in the myosin converter domain is essential for normal ATPase activity, in vitro motility and locomotion. Our results provide the first mutational evidence that intramolecular signaling between the relay loop and converter domain is critical for myosin function both in vitro and in muscle.

Structural dynamics of the myosin relay helix by time-resolved EPR and FRET

We have used two complementary time-resolved spectroscopic techniques, dipolar electron-electron resonance and fluorescence resonance energy transfer to determine conformational changes in a single structural element of the myosin motor domain, the relay helix, before and after the recovery stroke. Two double-Cys mutants were labeled with optical probes or spin labels, and interprobe distances were determined. Both methods resolved two distinct structural states of myosin, corresponding to straight and bent conformations of the relay helix. The bent state was occupied only upon nucleotide addition, indicating that relay helix, like the entire myosin head, bends in the recovery stroke. However, saturation of myosin with nucleotide, producing a single biochemical state, did not produce a single structural state. Both straight and bent structural states of the relay helix were occupied when either ATP (ADP.BeF(x)) or ADP.P(i) (ADP.AlF(4)) analogs were bound at the active site. A greater population was found in the bent structural state when the posthydrolysis analog ADP.AlF(4) was bound. We conclude that the bending of the relay helix in the recovery stroke does not require ATP hydrolysis but is favored by it. A narrower interprobe distance distribution shows ordering of the relay helix, despite its bending, during the recovery stroke, providing further insight into the dynamics of this energy-transducing structural transition.

Site-directed spectroscopic probes of actomyosin structural dynamics

Spectroscopy of myosin and actin has entered a golden age. High-resolution crystal structures of isolated actin and myosin have been used to construct detailed models for the dynamic actomyosin interactions that move muscle. Improved protein mutagenesis and expression technologies have facilitated site-directed labeling with fluorescent and spin probes. Spectroscopic instrumentation has achieved impressive advances in sensitivity and resolution. Here we highlight the contributions of site-directed spectroscopic probes to understanding the structural dynamics of myosin II and its actin complexes in solution and muscle fibers. We emphasize studies that probe directly the movements of structural elements within the myosin catalytic and light-chain domains, and changes in the dynamics of both actin and myosin due to their alternating strong and weak interactions in the ATPase cycle. A moving picture emerges in which single biochemical states produce multiple structural states, and transitions between states of order and dynamic disorder power the actomyosin engine.

Alternative versions of the myosin relay domain differentially respond to load to influence Drosophila muscle kinetics

We measured the influence of alternative versions of the Drosophila melanogaster myosin heavy chain relay domain on muscle mechanical properties. We exchanged relay domain regions (encoded by alternative versions of exon 9) between an embryonic (EMB) isoform and the indirect flight muscle isoform (IFI) of myosin. Previously, we observed no effect of exchanging the EMB relay domain region into the flight muscle isoform (IFI-9b) on in vitro actin motility velocity or solution ATPase measurements compared to IFI. However, in indirect flight muscle fibers, IFI-9b exhibited decreased maximum power generation (P(max)) and optimal frequency of power generation (f(max)) to 70% and 83% of IFI fiber values. The decrease in muscle performance reduced the flight ability and wing-beat frequency of IFI-9b Drosophila compared to IFI Drosophila. Previously, we found that exchanging the flight muscle specific relay domain into the EMB isoform (EMB-9a) prevented actin movement in the in vitro motility assay compared to EMB, which does support actin movement. However, in indirect flight muscle fibers EMB-9a was a highly effective motor, increasing P(max) and f(max) 2.5-fold and 1.4-fold, respectively, compared to fibers expressing EMB. We propose that the oscillatory load EMB-9a experiences in the muscle fiber reduces a high activation energy barrier between two strongly bound states of the cross-bridge cycle, thereby promoting cross-bridge cycling. The IFI relay domain's enhanced sensitivity to load increases cross-bridge kinetics, whereas the EMB version is less load-sensitive.

Switch 1 mutation S217A converts myosin V into a low duty ratio motor

We have determined the kinetic mechanism and motile properties of the switch 1 mutant S217A of myosin Va. Phosphate dissociation from myosin V-ADP-Pi (inorganic phosphate) and actomyosin V-ADP-Pi and the rate of the hydrolysis step (myosin V-ATP-->myosin V-ADP-Pi) were all approximately 10-fold slower in the S217A mutant than in wild type (WT) myosin V, resulting in a slower steady-state rate of basal and filamentous actin (actin)-activated ATP hydrolysis. Substrate binding and ADP dissociation kinetics were all similar to or slightly faster in S217A than in WT myosin V and mechanochemical gating of the rates of dissociation of ADP between trail and lead heads is maintained. The reduction in the rate constants of the hydrolysis and phosphate dissociation steps reduces the duty ratio from approximately 0.85 in WT myosin V to approximately 0.25 in S217A and produces a motor in which the average run length on actin at physiological concentrations of ATP is reduced 10-fold. Thus we demonstrate that, by mutational perturbation of the switch 1 structure, myosin V can be converted into a low duty ratio motor that is processive only at low substrate concentrations.

On the ability of 8-bromoadenosine triphosphate to support contractility of vertebrate skeletal muscle fibers

Previous studies using solubilized fragments of myosins have shown that an ATP analogue, 8-bromoadenosine triphosphate (8-Br-ATP) is a poor substrate for fast skeletal myosin isoform. We further characterized the analogue by using vertebrate skeletal muscle fibers. In the absence of calcium, the rate of 8-Br-ATP hydrolysis by fibers was higher than that for ATP, but it kept the fibers relaxed. The X-ray diffraction patterns of fibers relaxed by 8-Br-ATP were also indistinguishable from those of fibers relaxed by ATP, but higher concentrations were needed to keep the fibers relaxed. In the presence of calcium, the fibers exhibited force development and active shortening to varying extents. Although some of the energy for the observed contractility could be ascribed to the trace ATP in the reagents, the fibers activated in 8-Br-ATP performed much more mechanical work than expected from the energy of the trace ATP alone. The results suggest that most of the hydrolytic products of 8-Br-ATP dissociate from myosin prematurely, but a small fraction of myosin with these products does enter the calcium-dependent work-producing pathway and complete the normal process of chemo-mechanical conversion.

Crystal structure of the 25 kDa subunit of human cleavage factor Im

Cleavage factor I_m is an essential component of the pre-messenger RNA 3′-end processing machinery in higher eukaryotes, participating in both the polyadenylation and cleavage steps. Cleavage factor I_m is an oligomer composed of a small 25 kDa subunit (CF I_m25) and a variable larger subunit of either 59, 68 or 72 kDa. The small subunit also interacts with RNA, poly(A) polymerase, and the nuclear poly(A)-binding protein. These protein–protein interactions are thought to be facilitated by the Nudix domain of CF I_m25, a hydrolase motif with a characteristic α/β/α fold and a conserved catalytic sequence or Nudix box. We present here the crystal structures of human CF I_m25 in its free and diadenosine tetraphosphate (Ap₄A) bound forms at 1.85 and 1.80 Å, respectively. CF I_m25 crystallizes as a dimer and presents the classical Nudix fold. Results from crystallographic and biochemical experiments suggest that CF I_m25 makes use of its Nudix fold to bind but not hydrolyze ATP and Ap₄A. The complex and apo protein structures provide insight into the active oligomeric state of CF I_m and suggest a possible role of nucleotide binding in either the polyadenylation and/or cleavage steps of pre-messenger RNA 3′-end processing.

Alternative relay domains of Drosophila melanogaster myosin differentially affect ATPase activity, in vitro motility, myofibril structure and muscle function

The relay domain of myosin is hypothesized to function as a communication pathway between the nucleotide-binding site, actin-binding site and the converter domain. In Drosophila melanogaster, a single myosin heavy chain gene encodes three alternative relay domains. Exon 9a encodes the indirect flight muscle isoform (IFI) relay domain, whereas exon 9b encodes one of the embryonic body wall isoform (EMB) relay domains. To gain a better understanding of the function of the relay domain and the differences imparted by the IFI and the EMB versions, we constructed two transgenic Drosophila lines expressing chimeric myosin heavy chains in indirect flight muscles lacking endogenous myosin. One expresses the IFI relay domain in the EMB backbone (EMB-9a), while the second expresses the EMB relay domain in the IFI backbone (IFI-9b). Our studies reveal that the EMB relay domain is functionally equivalent to the IFI relay domain when it is substituted into IFI. Essentially no differences in ATPase activity, actin-sliding velocity, flight ability at room temperature or muscle structure are observed in IFI-9b compared to native IFI. However, when the EMB relay domain is replaced with the IFI relay domain, we find a 50% reduction in actin-activated ATPase activity, a significant increase in actin affinity, abolition of actin sliding, defects in myofibril assembly and rapid degeneration of muscle structure compared to EMB. We hypothesize that altered relay domain conformational changes in EMB-9a impair intramolecular communication with the EMB-specific converter domain. This decreases transition rates involving strongly bound actomyosin states, leading to a reduced ATPase rate and loss of actin motility.

An unusual transduction pathway in human tonic smooth muscle myosin

The motor protein myosin binds actin and ATP, producing work by causing relative translation of the proteins while transducing ATP free energy. Smooth muscle myosin has one of four heavy chains encoded by the MYH11 gene that differ at the C-terminus and in the active site for ATPase due to alternate splicing. A seven-amino-acid active site insert in phasic muscle myosin is absent from the tonic isoform. Fluorescence increase in the nucleotide sensitive tryptophan (NST) accompanies nucleotide binding and hydrolysis in several myosin isoforms implying it results from a common origin within the motor. A wild-type tonic myosin (smA) construct of the enzymatic head domain (subfragment 1 or S1) has seven tryptophan residues and nucleotide-induced fluorescence enhancement like other myosins. Three smA mutants probe the molecular basis for the fluorescence enhancement. W506+ contains one tryptophan at position 506 homologous to the NST in other myosins. W506F has the native tryptophans except phenylalanine replaces W506, and W506+(Y499F) is W506+ with phenylalanine replacing Y499. W506+ lacks nucleotide-induced fluorescence enhancement probably eliminating W506 as the NST. W506F has impaired ATPase activity but retains nucleotide-induced fluorescence enhancement. Y499F replacement in W506+ partially rescues nucleotide sensitivity demonstrating the role of Y499 as an NST facilitator. The exceptional response of W506 to active site conformation opens the possibility that phasic and tonic isoforms differ in how influences from active site ATPase propagate through the protein network.

Kinetic mechanism of the fastest motor protein, Chara myosin

Chara corallina class XI myosin is by far the fastest molecular motor. To investigate the molecular mechanism of this fast movement, we performed a kinetic analysis of a recombinant motor domain of Chara myosin. We estimated the time spent in the strongly bound state with actin by measuring rate constants of ADP dissociation from actin.motor domain complex and ATP-induced dissociation of the motor domain from actin. The rate constant of ADP dissociation from acto-motor domain was >2800 s(-1), and the rate constant of ATP-induced dissociation of the motor domain from actin at physiological ATP concentration was 2200 s(-1). From these data, the time spent in the strongly bound state with actin was estimated to be <0.82 ms. This value is the shortest among known values for various myosins and yields the duty ratio of <0.3 with a V(max) value of the actin-activated ATPase activity of 390 s(-1). The addition of the long neck domain of myosin Va to the Chara motor domain largely increased the velocity of the motility without increasing the ATP hydrolysis cycle rate, consistent with the swinging lever model. In addition, this study reveals some striking kinetic features of Chara myosin that are suited for the fast movement: a dramatic acceleration of ADP release by actin (1000-fold) and extremely fast ATP binding rate.

Temperature dependence of nucleotide association and kinetic characterization of myo1b

Myo1b is a widely expressed myosin-I isoform that concentrates on endosomal and ruffling membranes and is thought to play roles in membrane trafficking and dynamics. It is one of the best characterized myosin-I isoforms and appears to have unique biochemical properties tuned for tension sensing or tension maintenance. We determined the key biochemical rate constants that define the actomyo1b ATPase cycle at 37 degrees C and measured the temperature dependence of ATP binding, ADP release, and the transition from a nucleotide-inaccessible state to a nucleotide-accessible state (k(alpha)). The rate of ATP binding is highly temperature sensitive, with an Arrhenius activation energy 2-3-fold greater than other characterized myosins (e.g., myosin-II and myosin-V). ATP hydrolysis is fast, and phosphate release is slow and rate limiting with an actin dependence that is nearly identical to the steady-state ATPase parameters (Vmax and K(ATPase)). ADP release is not as temperature dependent as ATP binding. The rates and temperature dependence of ADP release are similar to k(alpha) suggesting that a similar structural change is responsible for both transitions. We calculate a duty ratio of 0.08 based on the biochemical kinetics. However, this duty ratio is likely to be highly sensitive to strain.

The interaction of Phe472 with a fluorescent inhibitor bound to the complex of myosin subfragment-1 with nucleotide

The fluorescent probe 3-[4-(3-phenyl-2-pyrazolin-1-yl)benzene-1-sulfonyl amido]phenylboronic acid (PPBA) acts as a fluorescent inhibitor for the ATPases of skeletal [Hiratsuka (1994) J. Biol. Chem. 269, 27251-27257] and Dictyostelium discoideum [Bobkov et al. (1997) J. Muscle Res. Cell Motil. 18, 563-571] myosins. The former paper suggested that, upon addition of excess nucleotides to the binary complex of subfragment-1 from skeletal myosin (S1) with PPBA, a stable ternary complex of S1 with PPBA and nucleotide is formed. Useful fluorescence properties of PPBA enable us to distinguish the conformation of the myosin ATPase at the ATP state from that at the ADP state. In the present paper, to determine the PPBA-binding site in the complexes, enzymatic and fluorescence properties of the S1.PPBA.nucleotide complexes were investigated. Upon formation of the ternary complex with ATP, a new peak appeared at 398 nm in the PPBA fluorescence spectrum. Experiments using model compounds of aromatic amino acid suggested that this fluorescence peak at 398 nm is originated from PPBA interacting with Phe residue(s). Taking into account differences in fluorescence spectra between complexes of S1 and those of subfragment-1 from D. discoideum myosin (S1dC), in the ternary complex of S1 formed with ATP, PPBA was suggested to interact with Phe residue(s) that is absent in S1dC. Docking simulation of PPBA on the S1.nucleotide complex revealed that Phe472 interacts with PPBA. Binding sites of PPBA and blebbistatin, an inhibitor showing high affinity and selectivity toward myosin II [Kovács et al. (2004) J. Biol. Chem. 279, 35557-35563], seem to overlap at least partly.

Dynamics of the upper 50-kDa domain of myosin V examined with fluorescence resonance energy transfer

The upper 50-kDa region of myosin may be critical for coupling between the nucleotide- and actin-binding regions. We introduced a tetracysteine motif in the upper 50-kDa domain (residues 292-297) of myosin V containing a single IQ domain (MV 1IQ), allowing us to label this site with the fluorescein biarscenical hairpin-binding dye (FlAsH) (MV 1IQ FlAsH). The enzymatic properties of MV 1IQ FlAsH were similar to those of unlabeled MV 1IQ except for a 3-fold reduced ADP-release rate. MV 1IQ FlAsH was also capable of moving actin filaments in the in vitro motility assay. To examine rotation of the upper 50-kDa region, we determined the difference in the degree of energy transfer from N-methylanthraniloyl (mant)-labeled nucleotides to FlAsH in both steady-state and transient kinetic experiments. The energy transfer efficiency was higher with mant-ATP (0.65 +/- 0.02) compared with mant-ADP (0.55 +/- 0.02) in the absence of actin. Stopped-flow measurements suggested that the energy transfer efficiency decreased with phosphate release (0.04 s(-1)) in the absence of actin. In contrast, upon mixing MV 1IQ FlAsH in the ADP.P(i) state with actin, a decrease in the energy transfer signal was observed at a rate of 13 s(-1), similar to the ADP release rate. Our results demonstrate there was no change in the energy transfer signal upon actin-activated phosphate release and suggest that actin binding alters the dynamics of the upper 50-kDa region, which may be critical for the ability of myosin to bind tightly to both ADP and actin.

A unique ATP hydrolysis mechanism of single-headed processive myosin, myosin IX

Recent studies have revealed that myosin IX is a single-headed processive myosin, yet it is unclear how myosin IX can achieve the processive movement. Here we studied the mechanism of ATP hydrolysis cycle of actomyosin IXb. We found that myosin IXb has a rate-limiting ATP hydrolysis step unlike other known myosins, thus populating the prehydrolysis intermediate (M.ATP). M.ATP has a high affinity for actin, and, unlike other myosins, the dissociation of M.ATP from actin was extremely slow, thus preventing myosin from dissociating away from actin. The ADP dissociation step was 10-fold faster than the overall ATP hydrolysis cycle rate and thus not rate-limiting. We propose the following model for single-headed processive myosin. Upon the formation of the M.ATP intermediate, the tight binding of actomyosin IX at the interface is weakened. However, the head is kept in close proximity to actin due to the tethering role of loop 2/large unique insertion of myosin IX. There is enough freedom for the myosin head to find the next location of the binding site along with the actin filament before complete dissociation from the filament. After ATP hydrolysis, Pi is quickly released to form a strong actin binding form, and a power stroke takes place.

Myosin VIIB from Drosophila is a high duty ratio motor

Myosin VII is an unconventional myosin widely expressed in organisms ranging from amoebae to mammals that has been shown to play vital roles in cell adhesion and phagocytosis. Here we present the first study of the mechanism of action of a myosin VII isoform. We have expressed a truncated single-headed Drosophila myosin VIIB construct in the baculovirus-Sf9 system that bound calmodulin light chains. By using steady-state and transient kinetic methods, we showed that myosin VIIB exhibits a fast release of phosphate and a slower, rate-limiting ADP release from actomyosin. As a result, myosin VIIB will be predominantly strongly bound to actin during steady-state ATP hydrolysis (its duty ratio will be at least 80%). This kinetic pattern is in many respects similar to that of the single-molecule vesicle transporters myosin V and VI. The enzymatic properties of myosin VIIB provide a kinetic basis for processivity upon possible dimerization via the C-terminal domains of the heavy chain. Our experiments also revealed conformational heterogeneity of the actomyosin VIIB complex in the absence of nucleotide.

Myosin V from Drosophila reveals diversity of motor mechanisms within the myosin V family

Myosin V is the best characterized vesicle transporter in vertebrates, but it has been unknown as to whether all members of the myosin V family share a common, evolutionarily conserved mechanism of action. Here we show that myosin V from Drosophila has a strikingly different motor mechanism from that of vertebrate myosin Va, and it is a nonprocessive, ensemble motor. Our steady-state and transient kinetic measurements on single-headed constructs reveal that a single Drosophila myosin V molecule spends most of its mechanochemical cycle time detached from actin, therefore it has to function in processive units that comprise several molecules. Accordingly, in in vitro motility assays, double-headed Drosophila myosin V requires high surface concentrations to exhibit a continuous translocation of actin filaments. Our comparison between vertebrate and fly myosin V demonstrates that the well preserved function of myosin V motors in cytoplasmic transport can be accomplished by markedly different underlying mechanisms.

Structural rearrangements in the active site of smooth-muscle myosin

Structural rearrangements of the myosin upper-50 kD subdomain are thought to play a key role in coordinating actin binding with nucleotide hydrolysis during the myosin ATPase cycle. Such rearrangements could open and close the active site in opposition to the actin-binding cleft, helping explain the opposing affinities of myosin for actin and nucleotide. To directly examine conformational changes across the active site during the ATPase cycle we have genetically engineered a mutant of chicken smooth-muscle myosin, F344W motor domain essential light chain, which contains a single tryptophan (344W) located on a short loop between two alpha helixes that traverse the upper-50 kD subdomain in front of the active site. Fluorescence resonance energy transfer was examined between the 344W donor probe and 2'(3')-O-(N-methylanthraniloyl) (mant)-nucleotide acceptor probes in the active site of this construct. The observed fluorescence resonance energy transfer efficiencies were 6.4% in the presence of mant ADP and 23.8% in the presence of mant ATP, corresponding to distances of 33.4 A and 24.9 A, respectively. Our results are consistent with structural rearrangements in which there is an 8.5-A closure between the 344W residue and the mant moiety during the transition from the strongly (ADP) to weakly (ATP) actin-bound states of the myosin ATPase cycle.

Kinetics of structural changes in the relay loop and SH3 domain of myosin

The intrinsic fluorescence of smooth muscle myosin signals conformational changes associated with different catalytic states of the ATPase cycle. To elucidate this relationship, we have examined the pre-steady-state kinetics of nucleotide binding, hydrolysis, and product release in motor domain-essential light chain mutants containing a single endogenous tryptophan, either residue 512 in the rigid relay loop or residue 29 adjacent to the SH3 domain. The intrinsic fluorescence of W512 is sensitive to both nucleotide binding and hydrolysis, and appears to report structural changes at the active site, presumably through a direct connection with switch II. The intrinsic fluorescence of W29 is sensitive to nucleotide binding but not hydrolysis, and does not appear to be tightly linked with structural changes occurring at the active site. We propose that the SH3 domain may be sensitive to conformational changes in the lever arm through contacts with the essential light chain.

Dynamics of actomyosin interactions in relation to the cross-bridge cycle

Transient kinetic measurements of the actomyosin ATPase provided the basis of the Lymn-Taylor model for the cross-bridge cycle, which underpins current models of contraction. Following the determination of the structure of the myosin motor domain, it has been possible to introduce probes at defined sites and resolve the steps in more detail. Probes have been introduced in the Dicytostelium myosin II motor domain via three routes: (i) single tryptophan residues at strategic locations throughout the motor domain; (ii) green fluorescent protein fusions at the N and C termini; and (iii) labelled cysteine residues engineered across the actin-binding cleft. These studies are interpreted with reference to motor domain crystal structures and suggest that the tryptophan (W501) in the relay loop senses the lever arm position, which is controlled by the switch 2 open-to-closed transition at the active site. Actin has little effect on this process per se. A mechanism of product release is proposed in which actin has an indirect effect on the switch 2 and lever arm position to achieve mechanochemical coupling. Switch 1 closing appears to be a key step in the nucleotide-induced actin dissociation, while its opening is required for the subsequent activation of product release. This process has been probed with F239W and F242W substitutions in the switch 1 loop. The E706K mutation in skeletal myosin IIa is associated with a human myopathy. To simulate this disease we investigated the homologous mutation, E683K, in the Dictyostelium myosin motor domain.

Nucleotide dependent intrinsic fluorescence changes of W29 and W36 in smooth muscle myosin

The intrinsic fluorescence of smooth muscle myosin is sensitive to both nucleotide binding and hydrolysis. We have examined this relationship by making MDE mutants containing a single tryptophan residue at each of the seven positions found in the wild-type molecule. Previously, we have demonstrated that a conserved tryptophan residue (W512) is a major contributor to nucleotide-dependent changes of intrinsic fluorescence in smooth muscle myosin. In this study, an MDE containing all the endogenous tryptophans except W512 (W512 KO-MDE) decreases in intrinsic fluorescence upon nucleotide binding, demonstrating that the intrinsic fluorescence enhancement of smooth muscle myosin is not solely due to W512. Candidates for the observed quench of intrinsic fluorescence in W512 KO-MDE include W29 and W36. Whereas the intrinsic fluorescence of W36-MDE is only slightly sensitive to nucleotide binding, that of W29-MDE is paradoxically both quenched and blue-shifted upon nucleotide binding. Steady-state and time-resolved experiments suggest that fluorescence intensity changes of W29 involve both excited-state and ground-state quenching mechanisms. These results have important implications for the role of the N-terminal domain (residues 1-76) in smooth muscle myosin in the molecular mechanism of muscle contraction.

Mechanism of action of myosin X, a membrane-associated molecular motor

We have performed a detailed biochemical kinetic and spectroscopic study on a recombinant myosin X head construct to establish a quantitative model of the enzymatic mechanism of this membrane-bound myosin. Our model shows that during steady-state ATP hydrolysis, myosin X exhibits a duty ratio (i.e. the fraction of the cycle time spent strongly bound to actin) of around 16%, but most of the remaining myosin heads are also actin-attached even at moderate actin concentrations in the so-called "weak" actin-binding states. Contrary to the high duty ratio motors myosin V and VI, the ADP release rate constant from actomyosin X is around five times greater than the maximal steady-state ATPase activity, and the kinetic partitioning between different weak actin-binding states is a major contributor to the rate limitation of the enzymatic cycle. Two different ADP states of myosin X are populated in the absence of actin, one of which shows very similar kinetic properties to actomyosin.ADP. The nucleotide-free complex of myosin X with actin shows unique spectral and biochemical characteristics, indicating a special mode of actomyosin interaction.

A series of related nucleotide analogues that aids optimization of fluorescence signals in probing the mechanism of P-loop ATPases, such as actomyosin

We have synthesized a set of ATP and ADP analogues that have a fluorophore linked to the nucleotide via the 3'-position of the ribose moiety. Combinations of three different coumarins are each attached via different length linkers. A linker based on propylenediamine increases the separation between the nucleotide and fluorophore relative to that of the previously reported ethylenediamine-linked coumarin nucleotides [Webb, M. R., and Corrie, J. E. T. (2001) Biophys. J. 81, 1562-1569]. A synthesis of 3'-amino-3'-deoxyATP is described using a combination of chemical and enzymatic procedures, mostly from published methods for synthesis of this compound but with some modifications that improved the convenience of the experimental procedures. This compound is used as a basis of a series of analogues with effectively a zero-length linker. Fluorescence properties of all these analogues are described, together with the kinetics of their interaction with rabbit skeletal myosin subfragment 1 in the presence and absence of actin. One particular analogue, deac-aminoATP [3'-(7-diethylaminocoumarin-3-carbonylamino)-3'-deoxyadenosine 5'-triphosphate], shows a 17-fold enhancement of fluorescence upon binding to this (skeletal) myosin II. As the diphosphate, it exhibits a large signal change upon dissociation from the actomyosin, with kinetics similar to those of natural ADP. The ability of this set of analogues to produce large signals indicated potential uses when scarce proteins are studied in small amounts.

Engineering lysine reactivity as a conformational sensor in the Dictyostelium myosin II motor domain

Lys84 of skeletal muscle myosin located at the interface between the motor and neck domains has long been utilized as a useful chemical probe sensing motor domain conformational changes and tilting of the lever arm. Here we report the first site-directed mutagenesis study on this side chain and its immediate chemical environment. We made Dictyostelium myosin II motor domain constructs in which Lys84 was replaced by either a methionine or a glutamic acid residue and another mutant containing an Arg704Glu substitution. By following trinitrophenylation of the mutant constructs, we first unambiguously identify Lys84 as the reactive lysine in Dictyostelium myosin. Analysis of the reaction profiles also reveals that the Lys84-Arg704 interaction at the interface of two subdomains of the myosin head has a significant effect on Lys84 reactivity, but it is not the only determinant of this property. Our findings imply that the nucleotide sensitivity of the trinitrophenylation reaction is a general feature of conventional myosins that reflects similar changes in the conformational dynamics of the different orthologs during the ATPase cycle.

On the myosin catalysis of ATP hydrolysis

Myosin is an ATP-hydrolyzing motor that is critical in muscle contraction. It is well established that in the hydrolysis that it catalyzes a water molecule attacks the gamma-phosphate of an ATP bound to its active site, but the details of these events have remained obscure. This is mainly because crystallographic search has not located an obvious catalytic base near the vulnerable phosphate. Here we suggest a means whereby this dilemma is probably overcome. It has been shown [Fisher, A. J., et al. (1995) Biochemistry 34, 8960-8972; Smith, C. A., and Rayment, I. (1996) Biochemistry 35, 5404-5417] that in an early event, Arg-247 and Glu-470 come together into a "salt-bridge". We suggest that in doing so they also position and orient two contiguous water molecules; one of these becomes the lytic water, perfectly poised to attack the bound gamma-phosphorus. Its hydroxyl moiety attacks the phosphorus, and the resulting proton transfers to the second water, converting it into a hydronium ion (as is experimentally observed). It is shown in this article how these central events of the catalysis are consistent with the behavior of several residues of the neighboring region.

Mechanism of blebbistatin inhibition of myosin II

Blebbistatin is a recently discovered small molecule inhibitor showing high affinity and selectivity toward myosin II. Here we report a detailed investigation of its mechanism of inhibition. Blebbistatin does not compete with nucleotide binding to the skeletal muscle myosin subfragment-1. The inhibitor preferentially binds to the ATPase intermediate with ADP and phosphate bound at the active site, and it slows down phosphate release. Blebbistatin interferes neither with binding of myosin to actin nor with ATP-induced actomyosin dissociation. Instead, it blocks the myosin heads in a products complex with low actin affinity. Blind docking molecular simulations indicate that the productive blebbistatin-binding site of the myosin head is within the aqueous cavity between the nucleotide pocket and the cleft of the actin-binding interface. The property that blebbistatin blocks myosin II in an actin-detached state makes the compound useful both in muscle physiology and in exploring the cellular function of cytoplasmic myosin II isoforms, whereas the stabilization of a specific myosin intermediate confers a great potential in structural studies.

Dynamic reorganization of the motor domain of myosin subfragment 1 in different nucleotide states

Atomic models of the myosin motor domain with different bound nucleotides have revealed the open and closed conformations of the switch 2 element [Geeves, M.A. & Holmes, K.C. (1999) Annu. Rev. Biochem.68, 687-728]. The two conformations are in dynamic equilibrium, which is controlled by the bound nucleotide. In the present work we attempted to characterize the flexibility of the motor domain in the open and closed conformations in rabbit skeletal myosin subfragment 1. Three residues (Ser181, Lys553 and Cys707) were labelled with fluorophores and the probes identified three fluorescence resonance energy transfer pairs. The effect of ADP, ADP.BeFx, ADP.AlF4- and ADP.Vi on the conformation of the motor domain was shown by applying temperature-dependent fluorescence resonance energy transfer methods. The 50 kDa lower domain was found to maintain substantial rigidity in both the open and closed conformations to provide the structural basis of the interaction of myosin with actin. The flexibility of the 50 kDa upper domain was high in the open conformation and further increased in the closed conformation. The converter region of subfragment 1 became more rigid during the open-to-closed transition, the conformational change of which can provide the mechanical basis of the energy transduction from the nucleotide-binding pocket to the light-chain-binding domain.

Engineering Dictyostelium discoideum myosin II for the introduction of site-specific fluorescence probes

Dictyostelium discoideum is a useful host for the production of constructs for the analysis of structure-function relationships of myosin. Here we describe the use of myosin II constructs containing a single tryptophan residue, at different locations, for probing events at the nucleotide binding site, the relay loop and the communication path between them. GFP fusions have also been expressed at the N- and C-termini of the myosin motor to provide sensitive probes of the actomyosin dissociation reaction in microscope-based kinetic assays. We report on the fluorescence anisotropy of these constructs in the context of their use as resonance energy transfer probes.

Kinetic mechanism of non-muscle myosin IIB: functional adaptations for tension generation and maintenance

Besides driving contraction of various types of muscle tissue, conventional (class II) myosins serve essential cellular functions and are ubiquitously expressed in eukaryotic cells. Three different isoforms in the human myosin complement have been identified as non-muscle class II myosins. Here we report the kinetic characterization of a human non-muscle myosin IIB subfragment-1 construct produced in the baculovirus expression system. Transient kinetic data show that most steps of the actomyosin ATPase cycle are slowed down compared with other class II myosins. The ADP affinity of subfragment-1 is unusually high even in the presence of actin filaments, and the rate of ADP release is close to the steady-state ATPase rate. Thus, non-muscle myosin IIB subfragment-1 spends a significantly higher proportion of its kinetic cycle strongly attached to actin than do the muscle myosins. This feature is even more pronounced at slightly elevated ADP levels, and it may be important in carrying out the cellular functions of this isoform working in small filamentous assemblies.

Energy transduction optical sensor in skeletal myosin

The skeletal myosin cross-bridge in dynamic association with actin is the unitary energy transducer in muscle, converting free energy from ATP hydrolysis into contractile force. Myosin's conserved ATP-sensitive tryptophan (AST) is an energy transduction optical sensor signaling transduction-related transient conformation change by modulating its fluorescence intensity amplitude and relaxation rate. Recently introduced techniques have provided the means of observing the time-resolved intensity decay from this single residue in the native protein to elucidate the mechanism of its ATP sensitivity. AST signal characteristics could be derived from local protein structure by a scenario involving interactions with excited-state tryptophan. This investigation suggests the very different possibility that hypochromism induced in the tryptophan absorption band, a ground-state effect, is a significant structural effector of optical transduction sensing. This possibility makes feasible the interpretation of the transient AST optical signal in terms of dynamical protein structure, thereby raising the empirical signal to the level of a structural determinant. Using the crystallographically based geometry from several myosin structures, the maximum calculated AST hypochromism is <10% to be compared with the value of approximately 30% observed here experimentally. Rationalizing the discrepancy invites further investigation of S1 dynamical structure local to the AST during transduction.

Analysis of nucleotide binding to Dictyostelium myosin II motor domains containing a single tryptophan near the active site

Dictyostelium myosin II motor domain constructs containing a single tryptophan residue near the active sites were prepared in order to characterize the process of nucleotide binding. Tryptophan was introduced at positions 113 and 131, which correspond to those naturally present in vertebrate skeletal muscle myosin, as well as position 129 that is also close to the adenine binding site. Nucleotide (ATP and ADP) binding was accompanied by a large quench in protein fluorescence in the case of the tryptophans at 129 and 131 but a small enhancement for that at 113. None of these residues was sensitive to the subsequent open-closed transition that is coupled to hydrolysis (i.e. ADP and ATP induced similar fluorescence changes). The kinetics of the fluorescence change with the F129W mutant revealed at least a three-step nucleotide binding mechanism, together with formation of a weakly competitive off-line intermediate that may represent a nonproductive mode of nucleotide binding. Overall, we conclude that the local and global conformational changes in myosin IIs induced by nucleotide binding are similar in myosins from different species, but the sign and magnitude of the tryptophan fluorescence changes reflect nonconserved residues in the immediate vicinity of each tryptophan. The nucleotide binding process is at least three-step, involving conformational changes that are quite distinct from the open-closed transition sensed by the tryptophan Trp(501) in the relay loop.

Tyrosine mediated tryptophan ATP sensitivity in skeletal myosin

Myosin is the molecular motor in muscle that generates torque and transiently reacts with actin. The mechanical work performed by the motor occurs by successive decrements in the free energy of the myosin-nucleotide system. The seat of these transitions is the globular "head" domain of the myosin molecule (subfragment 1 or S1). A very useful (hitherto empirical) signal of these transitions has been optical, namely, detection of state-dependent changes in absorbance or fluorescence of S1. This effect has now been found to arise in a particular myosin residue (Trp510 in rabbit skeletal muscle), enabling the study of its intimate mechanism. In this work, based on measuring time-dependent signals, we find that the signal change upon nucleotide binding is adequately explained by assuming that nucleotide binding to a remote site causes a transition from a situation in which Trp510 is strongly statically quenched to a situation in which it is weakly statically quenched. The Trp510-static quencher interaction is also responsible, in part, for the changing tryptophan optical density in S1 upon nucleotide binding. Using crystallographically based geometry, calculation of the Trp510 electronic wave function indicates that Tyr503 is the static quencher.

Kinetic resolution of a conformational transition and the ATP hydrolysis step using relaxation methods with a Dictyostelium myosin II mutant containing a single tryptophan residue

The fluorescence emission intensity from a conserved tryptophan residue (W501) located in the relay loop (F466 to L516) of the Dicytostelium discoideum myosin II motor domain is sensitive to ATP binding and hydrolysis. The initial binding process is accompanied by a small quench in fluorescence, and this is followed by a large enhancement that appears coincident with the hydrolysis step. Using temperature and pressure jump methods, we show that the enhancement process is kinetically distinct from but coupled to the hydrolysis step. The fluorescence enhancement corresponds to the open-closed transition (k(obs) approximately 1000 s(-1) at 20 degrees C). From the overall steady-state fluorescence signal and the presence or absence of a relaxation transient, we conclude that the ADP state is largely in the open state, while the ADP.AlF(4) state is largely closed. At 20 degrees C the open-closed equilibria for the AMP.PNP and ADP.BeF(x) complexes are close to unity and are readily perturbed by temperature and pressure. In the case of ATP, the equilibrium of this step slightly favors the open state, but coupling to the subsequent hydrolysis step gives rise to a predominantly closed state in the steady state. Pressure jump during steady-state ATP turnover reveals the distinct transients for the rapid open-closed transition and the slower hydrolysis step.

Structural characterization of beta-cardiac myosin subfragment 1 in solution

beta-cardiac myosin subfragment 1 (betaS1) tertiary structure and dynamics were characterized with proteolytic digestion, nucleotide analogue trapping kinetics, and intrinsic fluorescence changes accompanying nucleotide binding. Proteolysis of betaS1 produces the 25, 50, and 20 kDa fragments and a new cut within the 50-kDa fragment at Arg369. F-actin inhibits cleavage of the 50-kDa fragment and fails to inhibit cleavage at the 50/20 kDa junction, suggesting betaS1 presents an actoS1 conformation fundamentally different from skeletal S1. Time-dependent changes in Mg(2+)-ATPase accompanying proteolysis identifies cleavage points that lie within the energy transduction pathway. The nucleotide analogue trapping kinetics reveal the presence of a reversible weakly actin attached state. Comparison of nucleotide analogue induced betaS1 structures with the transient structures occurring during ATPase indicates analogue induced and transient structures are in a one-to-one correspondence. Tryptophan fluorescence enhancement accompanies the binding or trapping of nucleotide or nucleotide analogues. Isolation of Trp508 fluorescence shows it is an ATP-sensitive tryptophan and that its vicinity changes conformation sequentially with the transient intermediates accompanying ATPase. These studies elucidate energy transduction and suggest how mutations of betaS1 implicated in disease might undermine function, stability, or efficiency.

Kinetic mechanism and regulation of myosin VI

Myosin VI is the only pointed end-directed myosin identified and is likely regulated by heavy chain phosphorylation (HCP) at the actin-binding site in vivo. We undertook a detailed kinetic analysis of the actomyosin VI ATPase cycle to determine whether there are unique adaptations to support reverse directionality and to determine the molecular basis of regulation by HCP. ADP release is the rate-limiting step in the cycle. ATP binds slowly and with low affinity. At physiological nucleotide concentrations, myosin VI is strongly bound to actin and populates the nucleotide-free (rigor) and ADP-bound states. Therefore, myosin VI is a high duty ratio motor adapted for maintaining tension and has potential to be processive. A mutant mimicking HCP increases the rate of P(i) release, which lowers the K(ATPase) but does not affect ADP release. These measurements are the first to directly measure the steps regulated by HCP for any myosin. Measurements with double-headed myosin VI demonstrate that the heads are not independent, and the native dimer hydrolyzes multiple ATPs per diffusional encounter with an actin filament. We propose an alternating site model for the stepping and processivity of two-headed high duty ratio myosins.

Effect of ionic strength on the conformation of myosin subfragment 1-nucleotide complexes

The effect of ionic strength on the conformation and stability of S1 and S1-nucleotide-phosphate analog complexes in solution was studied. It was found that increasing concentration of KCl enhances the reactivity of Cys(707) (SH1 thiol) and Lys(84) (reactive lysyl residue) and the nucleotide-induced tryptophan fluorescence increment. In contrast, high KCl concentration lowers the structural differences between the intermediate states of ATP hydrolysis in the vicinity of Cys(707), Trp(510) and the active site, possibly by increasing the flexibility of the molecule. High concentrations of neutral salts inhibit both the formation and the dissociation of the M**.ADP.Pi analog S1.ADP.Vi complex. High ionic strength profoundly affects the structure of the stable S1.ADP.BeF(x) complex, by destabilizing the M*.ATP intermediate, which is the predominant form of the complex at low ionic strength, and shifting the equilibrium to favor the M**.ADP.Pi state. The M*.ATP intermediate is destabilized by perturbation of ionic interactions possibly by disruption of salt bridges. Two salt-bridge pairs, Glu(501)-Lys(505) in the Switch II helix and Glu(776)-Lys(84) connecting the catalytic domain to the lever arm, seem most appropriate to consider for participating in the ionic strength-induced transition of the open M*.ATP to the closed M**.ADP.Pi state of S1.

The dynamics of the relay loop tryptophan residue in the Dictyostelium myosin motor domain and the origin of spectroscopic signals

Steady-state and time-resolved fluorescence measurements were performed on a Dictyostelium discoideum myosin II motor domain construct retaining a single tryptophan residue at position 501, located on the relay loop. Other tryptophan residues were mutated to phenylalanine. The Trp-501 residue showed a large enhancement in fluorescence in the presence of ATP and a small quench in the presence of ADP as a result of perturbing both the ground and excited state processes. Fluorescence lifetime and quantum yield measurements indicated that at least three microstates of Trp-501 were present in all nucleotide states examined, and these could not be assigned to a particular gross conformation of the motor domain. Enhancement in emission intensity was associated with a reduction of the contribution from a statically quenched component and an increase in a component with a 5-ns lifetime, with little change in the contribution from a 1-ns lifetime component. Anisotropy measurements indicated that the Trp-501 side chain was relatively immobile in all nucleotide states, and the fluorescence was effectively depolarized by rotation of the whole motor domain with a correlation time on 50-70 ns. Overall these data suggest that the backbone of the relay loop remains structured throughout the myosin ATPase cycle but that the Trp-501 side chain experiences a different weighting in local environments provided by surrounding residues as the adjacent converter domain rolls around the relay loop.

Conformation of myosin interdomain interactions during contraction: deductions from proteins in solution

Myosin subfragment 1 (S1) is the ATP catalyzing motor protein in muscle. It consists of three domains that catalyze ATP and bind actin (catalytic), conduct energy transduction (converter), and transport the load (lever arm). These domains interface in two places identified as interface I, containing the reactive thiol (SH1) and ATP-sensitive tryptophan (Trp510), and interface II, containing the reactive lysine residue (RLR). Two crystal structures of S1 were extrapolated to working "in solution" or oriented "in tissue" forms, using structure-sensitive optical spectroscopic signals from extrinsic probes located in the interfaces. Observed signals included circular dichroism (CD) and absorption originating from S1 in solution in the presence and absence of actin and fluorescence polarization from cross-bridges in muscle fibers. Theoretical signals were calculated from S1 crystal structure models perturbed with lever arm movement from swiveling at three conserved glycines, 699, 703, and 710 (chicken skeletal myosin numbering). Structures giving the best agreement between the computed and observed signals were selected as the representative forms. Both interfaces undergo dramatic conformational change during ATPase and force development. Changes at interface I suggest the molecular basis for the collisional quenching sensitivity of Trp510 to nucleotide binding. The probe conformation at SH1 suggests how it alters S1 ATPases. At interface II, the spatial relationship of the lever arm and the extrinsic probe at RLR suggests how the probe alters S1 ATPases and that it should inhibit lever arm movement during the power stroke. The latter possibility, if true, establishes a part of the corridor through which the lever arm swings during the power stroke. Global structural changes in actomyosin are discussed in the accompanying paper [Burghardt et al. (2001) Biochemistry 40, 4821-4833].