X-ray Crystallographic Analysis of 6-Aminohexanoate-Dimer Hydrolase

Recycling and Degradation of Polyamides

As one of the five major engineering plastics, polyamide brings many benefits to humans in the fields of transportation, clothing, entertainment, health, and more. However, as the production of polyamide increases year by year, the pollution problems it causes are becoming increasingly severe. This article reviews the current recycling and treatment processes of polyamide, such as chemical, mechanical, and energy recovery, and degradation methods such as thermal oxidation, photooxidation, enzyme degradation, etc. Starting from the synthesis mechanism of polyamide, it discusses the advantages and disadvantages of different treatment methods of polyamide to obtain more environmentally friendly and economical treatment schemes. Finding enzymes that can degrade high-molecular-weight polyamides, exploring the recovery of polyamides under mild conditions, synthesizing environmentally degradable polyamides through copolymerization or molecular design, and finally preparing degradable bio-based polyamides may be the destination of polyamide.

Degradation and lifetime prediction of plastics in subsea and offshore infrastructures

Engineering and civil developments have relied on synthetic polymers and plastics (including polyethylene, polypropylene, polyamide, etc.) for decades, especially where their durability protects engineering structures against corrosion and other environmental stimuli. Offshore oil and gas infrastructure and renewable energy platforms are typical examples, where these plastics (100,000 s of metric tonnes worldwide) are used primarily as functional material to protect metallic flowlines and subsea equipment against seawater corrosion. Despite this, the current literature on polymers is limited to sea-surface environments, and a model for subsea degradation of plastics is needed. In this review, we collate relevant studies on the degradation of plastics and synthetic polymers in marine environments to gain insight into the fate of these materials when left in subsea conditions. We present a new mathematical model that accounts for various physicochemical changes in the oceanic environment as a function of depth to predict the lifespan of synthetic plastics and the possible formation of plastic debris, e.g., microplastics. We found that the degradation rate of the plastics decreases significantly as a function of water depth and can be estimated quantitatively by the mathematical model that accounts for the effect (and sensitivity) of geographical location, temperature, light intensity, hydrostatic pressure, and marine sediments. For instance, it takes a subsea polyethylene coating about 800 years to degrade on ocean floor (as opposed to <400 years in shallow coastal waters), generating 1000s of particles per g of degradation under certain conditions. Our results demonstrate how suspended sediments in the water column are likely to compensate for the decreasing depth-corrected degradation rates, resulting in surface abrasion and the formation of plastic debris such as microplastics. This review, and the complementing data, will be significant for the environmental impact assessment of plastics in subsea infrastructures. Moreover, as these infrastructures reach the end of their service life, the management of the plastic components becomes of great interest to environmental regulators, industry, and the community, considering the known sizeable impacts of plastics on global biogeochemical cycles.

Enzymes' Power for Plastics Degradation

Plastics are everywhere in our modern way of living, and their production keeps increasing every year, causing major environmental concerns. Nowadays, the end-of-life management involves accumulation in landfills, incineration, and recycling to a lower extent. This ecological threat to the environment is inspiring alternative bio-based solutions for plastic waste treatment and recycling toward a circular economy. Over the past decade, considerable efforts have been made to degrade commodity plastics using biocatalytic approaches. Here, we provide a comprehensive review on the recent advances in enzyme-based biocatalysis and in the design of related biocatalytic processes to recycle or upcycle commodity plastics, including polyesters, polyamides, polyurethanes, and polyolefins. We also discuss scope and limitations, challenges, and opportunities of this field of research. An important message from this review is that polymer-assimilating enzymes are very likely part of the solution to reaching a circular plastic economy.

X-ray crystallographic and mutational analysis of the NylC precursor: catalytic mechanism of autocleavage and substrate hydrolysis of nylon hydrolase

Nylon hydrolase (NylC), a member of the N-terminal nucleophile (Ntn) hydrolase superfamily, is responsible for the degradation of various aliphatic nylons, including nylon-6 and nylon-66. NylC is initially expressed as an inactive precursor (36 kDa), but the precursor is autocatalytically cleaved at Asn266/Thr267 to generate an active enzyme composed of 27 and 9 kDa subunits. We isolated various mutants with amino acid changes at the catalytic centre. X-ray crystallographic analysis revealed that the NylC precursor forms a doughnut-shaped quaternary structure composed of four monomers (molecules A-D) with D2 symmetry. Catalytic residues in the precursor are covered by loop regions at the A/B interface (equivalent to the C/D interface). However, the catalytic residues are exposed to the solvent environment through autocleavage followed by movements of the loop regions. T267A, D306A and D308A mutations resulted in a complete loss of autocleavage. By contrast, in the T267S mutant, autocleavage proceeded slowly at a constant reaction rate (k = 2.8 × 10^-5  s^-1 ) until complete conversion, but the reaction was inhibited by K189A and N219A mutations. Based on the crystallographic and molecular dynamic simulation analyses, we concluded that the Asp308-Asp306-Thr267 triad, resembling the Glu-Ser-Ser triad conserved in Ntn-hydrolase family enzymes, is responsible for autocleavage and that hydrogen-bonding networks connecting Thr267 with Lys189 and Asn219 are required for increasing the nucleophilicity of Thr267-OH in both the water accessible and water inaccessible systems. Furthermore, we determined that NylC employs the Asp308-Asp306-Thr267 triad as catalytic residues for substrate hydrolysis, but the reaction requires Lys189 and Tyr146 as additional catalytic/substrate-binding residues specific for nylon hydrolysis.

Structural and functional characterization of nylon hydrolases

Biodegradation of synthetic polymers is recognized as a useful way to reduce their environmental load and pollution, loss of natural resources, extensive energy consumption, and generation of greenhouse gases. The potential use of enzymes responsible for the degradation of the targeted polymers is an effective approach which enables the conversion of the used polymers to original monomers and/or other useful compounds. In addition, the enzymes are expected to be applicable in industrial processes such as improving the surface structures of the polymers. Especially, conversion of the solid polymers to soluble oligomers/monomers is a key step for the biodegradation of the polymers. Regarding the hydrolysis of polyamides, three enzymes, 6-aminohexanoate-cyclic-dimer hydrolase (NylA), 6-aminohexanoate-dimer hydrolase (NylB), and 6-aminohexanoate-oligomer endo-hydrolase (nylon hydrolase, NylC), are found in several bacterial strains. In this chapter, we describe our approach for the screening of microorganisms which degrade nylons and related compounds; preparation of substrates; assay of hydrolytic activity for soluble and insoluble substrates; and X-ray crystallographic and computational approaches for analysis of structure and catalytic mechanisms of the nylon-degrading enzymes.

Isolation and genomic analysis of 11-aminoundecanoic acid-degrading bacterium Pseudomonas sp. JG-B from nylon 11 enrichment culture

Nylon 11 is a polymer synthesized from 11-aminoundecanoic acid, and widely used in commercial manufacturing. In this study, we describe the isolation of the first organism capable of metabolizing 11-aminoundecanoic acid from nylon 11 enrichment culture. The strain shows rapid growth on 11-aminoundecanoic acid as a sole source of carbon, nitrogen, and energy. Furthermore, the genome sequence of strain JG-B was deciphered and shown to belong to genus Pseudomonas. Many genes encoding putative extracellular hydrolases, as well as homologues of nylon 6 hydrolases (NylB and NylA) were identified, suggesting the metabolic versatility and possibility that this organism could also depolymerase nylon 11 polymers.

Plastics: Environmental and Biotechnological Perspectives on Microbial Degradation

Plastics are widely used in the global economy, and each year, at least 350 to 400 million tons are being produced. Due to poor recycling and low circular use, millions of tons accumulate annually in terrestrial or marine environments. Today it has become clear that plastic causes adverse effects in all ecosystems and that microplastics are of particular concern to our health. Therefore, recent microbial research has addressed the question of if and to what extent microorganisms can degrade plastics in the environment. This review summarizes current knowledge on microbial plastic degradation. Enzymes available act mainly on the high-molecular-weight polymers of polyethylene terephthalate (PET) and ester-based polyurethane (PUR). Unfortunately, the best PUR- and PET-active enzymes and microorganisms known still have moderate turnover rates. While many reports describing microbial communities degrading chemical additives have been published, no enzymes acting on the high-molecular-weight polymers polystyrene, polyamide, polyvinylchloride, polypropylene, ether-based polyurethane, and polyethylene are known. Together, these polymers comprise more than 80% of annual plastic production. Thus, further research is needed to significantly increase the diversity of enzymes and microorganisms acting on these polymers. This can be achieved by tapping into the global metagenomes of noncultivated microorganisms and dark matter proteins. Only then can novel biocatalysts and organisms be delivered that allow rapid degradation, recycling, or value-added use of the vast majority of most human-made polymers.

Draft Genome Sequence of the Nylon Oligomer-Degrading Bacterium Arthrobacter sp. Strain KI72

We report here the 4.6-Mb genome sequence of a nylon oligomer-degrading bacterium, Arthrobacter sp. strain KI72. The draft genome sequence of strain KI72 consists of 4,568,574 bp, with a G+C content of 63.47%, 4,372 coding sequences (CDSs), 54 tRNAs, and six rRNAs.

Unraveling the degradation of artificial amide bonds in nylon oligomer hydrolase: from induced-fit to acylation processes

To unravel the factor that provides the ability to degrade non-biological amide bond with nylon oligomer hydrolase, we investigated the process from induced-fit to acylation by a combination of different theoretical methods.

Crystallographic analysis and biochemical applications of a novel penicillin-binding protein/β-lactamase homologue from a metagenomic library

Interest in penicillin-binding proteins and β-lactamases (the PBP-βL family) is increasing owing to their biological and clinical significance. In this study, the crystal structure of Est-Y29, a metagenomic homologue of the PBP-βL family, was determined at 1.7 Å resolution. In addition, complex structures of Est-Y29 with 4-nitrophenyl phosphate (4NP) and with diethyl phosphonate (DEP) at 2.0 Å resolution were also elucidated. Structural analyses showed that Est-Y29 is composed of two domains: a β-lactamase fold and an insertion domain. A deep hydrophobic patch between these domains defines a wide active site, and a nucleophilic serine (Ser58) residue is located in a groove defined primarily by hydrophobic residues between the two domains. In addition, three hydrophobic motifs, which make up the substrate-binding site, allow this enzyme to hydrolyze a wide variety of hydrophobic compounds, including fish and olive oils. Furthermore, cross-linked Est-Y29 aggregates (CLEA-Est-Y29) significantly increase the stability of the enzyme as well as its potential for extensive reuse in various deactivating conditions. The structural features of Est-Y29, together with biochemical and biophysical studies, could provide a molecular basis for understanding the properties and regulatory mechanisms of the PBP-βL family and their potential for use in industrial biocatalysts.

Nylon-Oligomer Hydrolase Promoting Cleavage Reactions in Unnatural Amide Compounds

The active site of 6-aminohexanoate-dimer hydrolase, a nylon-6 byproduct-degrading enzyme with a β-lactamase fold, possesses a Ser112/Lys115/Tyr215 catalytic triad similar to the one of penicillin-recognizing family of serine-reactive hydrolases but includes a unique Tyr170 residue. By using a reactive quantum mechanics/molecular mechanics (QM/MM) approach, we work out its catalytic mechanism and related functional/structural specificities. At variance with other peptidases, we show that the involvement of Tyr170 in the enzyme-substrate interactions is responsible for a structural variation in the substrate-binding state. The acylation via a tetrahedral intermediate is the rate-limiting step, with a free-energy barrier of ∼21 kcal/mol, driven by the catalytic triad Ser112, Lys115, and Tyr215, acting as a nucleophile, general base, and general acid, respectively. The functional interaction of Tyr170 with this triad leads to an efficient disruption of the tetrahedral intermediate, promoting a conformational change of the substrate favorable for proton donation from the general acid.

Crystallization and X-ray diffraction analysis of nylon hydrolase (NylC) from Arthrobacter sp. KI72

Nylon hydrolase (NylC) encoded by Arthrobacter plasmid pOAD2 (NylCp2) was expressed in Escherichia coli JM109 and purified by ammonium sulfate fractionation, anion-exchange column chromatography and gel-filtration chromatography. NylCp2 was crystallized by the sitting-drop vapour-diffusion method with ammonium sulfate as a precipitant in 0.1 M HEPES buffer pH 7.5 containing 0.2 M NaCl and 25% glycerol. Diffraction data were collected from the native crystal to a resolution of 1.60 Å. The obtained crystal was spindle shaped and belonged to the C-centred orthorhombic space group C2221, with unit-cell parameters a=70.84, b=144.90, c=129.05 Å. A rotation and translation search gave one clear solution containing two molecules per asymmetric unit.

Three-dimensional structure of nylon hydrolase and mechanism of nylon-6 hydrolysis

We performed x-ray crystallographic analyses of the 6-aminohexanoate oligomer hydrolase (NylC) from Agromyces sp. at 2.0 Å-resolution. This enzyme is a member of the N-terminal nucleophile hydrolase superfamily that is responsible for the degradation of the nylon-6 industry byproduct. We observed four identical heterodimers (27 kDa + 9 kDa), which resulted from the autoprocessing of the precursor protein (36 kDa) and which constitute the doughnut-shaped quaternary structure. The catalytic residue of NylC was identified as the N-terminal Thr-267 of the 9-kDa subunit. Furthermore, each heterodimer is folded into a single domain, generating a stacked αββα core structure. Amino acid mutations at subunit interfaces of the tetramer were observed to drastically alter the thermostability of the protein. In particular, four mutations (D122G/H130Y/D36A/E263Q) of wild-type NylC from Arthrobacter sp. (plasmid pOAD2-encoding enzyme), with a heat denaturation temperature of T(m) = 52 °C, enhanced the protein thermostability by 36 °C (T(m) = 88 °C), whereas a single mutation (G111S or L137A) decreased the stability by ∼10 °C. We examined the enzymatic hydrolysis of nylon-6 by the thermostable NylC mutant. Argon cluster secondary ion mass spectrometry analyses of the reaction products revealed that the major peak of nylon-6 (m/z 10,000-25,000) shifted to a smaller range, producing a new peak corresponding to m/z 1500-3000 after the enzyme treatment at 60 °C. In addition, smaller fragments in the soluble fraction were successively hydrolyzed to dimers and monomers. Based on these data, we propose that NylC should be designated as nylon hydrolase (or nylonase). Three potential uses of NylC for industrial and environmental applications are also discussed.

X-ray crystallographic analysis of the 6-aminohexanoate cyclic dimer hydrolase: catalytic mechanism and evolution of an enzyme responsible for nylon-6 byproduct degradation

We performed x-ray crystallographic analyses of the 6-aminohexanoate cyclic dimer (Acd) hydrolase (NylA) from Arthrobacter sp., an enzyme responsible for the degradation of the nylon-6 industry byproduct. The fold adopted by the 472-amino acid polypeptide generated a compact mixed alpha/beta fold, typically found in the amidase signature superfamily; this fold was especially similar to the fold of glutamyl-tRNA(Gln) amidotransferase subunit A (z score, 49.4) and malonamidase E2 (z score, 44.8). Irrespective of the high degree of structural similarity to the typical amidase signature superfamily enzymes, the specific activity of NylA for glutamine, malonamide, and indoleacetamide was found to be lower than 0.5% of that for Acd. However, NylA possessed carboxylesterase activity nearly equivalent to the Acd hydrolytic activity. Structural analysis of the inactive complex between the activity-deficient S174A mutant of NylA and Acd, performed at 1.8 A resolution, suggested the following enzyme/substrate interactions: a Ser(174)-cis-Ser(150)-Lys(72) triad constitutes the catalytic center; the backbone N in Ala(171) and Ala(172) are involved in oxyanion stabilization; Cys(316)-S(gamma) forms a hydrogen bond with nitrogen (Acd-N(7)) at the uncleaved amide bond in two equivalent amide bonds of Acd. A single S174A, S150A, or K72A substitution in NylA by site-directed mutagenesis decreased the Acd hydrolytic and esterolytic activities to undetectable levels, indicating that Ser(174)-cis-Ser(150)-Lys(72) is essential for catalysis. In contrast, substitutions at position 316 specifically affected Acd hydrolytic activity, suggesting that Cys(316) is responsible for Acd binding. On the basis of the structure and functional analysis, we discussed the catalytic mechanisms and evolution of NylA in comparison with other Ser-reactive hydrolases.

Two alternative modes for optimizing nylon-6 byproduct hydrolytic activity from a carboxylesterase with a beta-lactamase fold: X-ray crystallographic analysis of directly evolved 6-aminohexanoate-dimer hydrolase

Promiscuous 6-aminohexanoate-linear dimer (Ald)-hydrolytic activity originally obtained in a carboxylesterase with a beta-lactamase fold was enhanced about 80-fold by directed evolution using error-prone PCR and DNA shuffling. Kinetic studies of the mutant enzyme (Hyb-S4M94) demonstrated that the enzyme had acquired an increased affinity (K(m) = 15 mM) and turnover (k(cat) = 3.1 s(-1)) for Ald, and that a catalytic center suitable for nylon-6 byproduct hydrolysis had been generated. Construction of various mutant enzymes revealed that the enhanced activity in the newly evolved enzyme is due to the substitutions R187S/F264C/D370Y. Crystal structures of Hyb-S4M94 with bound substrate suggested that catalytic function for Ald was improved by hydrogen-bonding/hydrophobic interactions between the Ald--COOH and Tyr370, a hydrogen-bonding network from Ser187 to Ald--NH(3) (+), and interaction between Ald--NH(3) (+) and Gln27-O(epsilon) derived from another subunit in the homo-dimeric structure. In wild-type Ald-hydrolase (NylB), Ald-hydrolytic activity is thought to be optimized by the substitutions G181D/H266N, which improve an electrostatic interaction with Ald--NH(3) (+) (Kawashima et al., FEBS J 2009; 276:2547-2556). We propose here that there exist at least two alternative modes for optimizing the Ald-hydrolytic activity of a carboxylesterase with a beta-lactamase fold.

Genetic organization of nylon-oligomer-degrading enzymes from alkalophilic bacterium, Agromyces sp. KY5R

A 15-kb gene locus including nylon-oligomer-degrading genes from the chromosome of an alkalophilic bacterium, Agromyces sp. KY5R, was cloned and sequenced. The genetic organization was similar to the DNA region flanked by directly repeated IS6100 sequences on the nylon-oligomer-degradative plasmid pOAD2. However, we found several genetic rearrangements between the two DNA regions. Here, we discuss the possible mechanisms underlying the genetic rearrangements.

6-Aminohexanoate oligomer hydrolases from the alkalophilic bacteria Agromyces sp. strain KY5R and Kocuria sp. strain KY2

Alkalophilic, nylon oligomer-degrading strains, Agromyces sp. and Kocuria sp., were isolated from the wastewater of a nylon-6 factory and from activated sludge from a sewage disposal plant. The 6-aminohexanoate oligomer hydrolases (NylC) from the alkalophilic strains had 95.8 to 98.6% similarity to the enzyme in neutrophilic Arthrobacter sp. but had superior thermostability, activity under alkaline conditions, and affinity for nylon-related substrates, which would be advantageous for biotechnological applications.

Mutational analysis of 6-aminohexanoate-dimer hydrolase: Relationship between nylon oligomer hydrolytic and esterolytic activities

Carboxylesterase (EII') from Arthrobacter sp. KI72 has 88% homology to 6-aminohexanoate-dimer hydrolase (EII) and possesses ca. 0.5% of the level of 6-aminohexanoate-linear dimer (Ald)-hydrolytic activity of EII. To study relationship between Ald-hydrolytic and esterolytic activities, random mutations were introduced into the gene for Hyb-24 (an EII/EII' hybrid with the majority of the sequence deriving for EII' and possessing an EII'-like level of Ald-hydrolytic activity). Either a G181D or a D370Y substitution in Hyb-24 increased the Ald-hydrolytic activity ca. 10-fold, and a G181D/D370Y double substitution increased activity ca. 100-fold. On the basis of kinetic studies and the three-dimensional structure of the enzyme, we suggest that binding of Ald is improved by these mutations. D370Y increased esterolytic activity for glycerylbutyrate ca. 30-50-fold, whereas G181D decreased the activity to 30% of the parental enzyme.