Analysis of the Acid Passivation of Stainless Steel

Perspectives on Corrosion Studies Using Scanning Electrochemical Cell Microscopy: Challenges and Opportunities

Scanning electrochemical cell microscopy (SECCM) allows for electrochemical imaging at the micro- or nanoscale by confining the electrochemical reaction cell in a small meniscus formed at the end of a micro- or nanopipette. This technique has gained popularity in electrochemical imaging due to its high-throughput nature. Although it shows considerable application potential in corrosion science, there are still formidable and exciting challenges to be faced, particularly relating to the high-throughput characterization and analysis of microelectrochemical big data. The objective of this perspective is to arouse attention and provide opinions on the challenges, recent progress, and future prospects of the SECCM technique to the electrochemical society, particularly from the viewpoint of corrosion scientists. Specifically, four main topics are systematically reviewed and discussed: (1) the development of SECCM; (2) the applications of SECCM for corrosion studies; (3) the challenges of SECCM in corrosion studies; and (4) the opportunities of SECCM for corrosion science.

Susceptibility of 316L Stainless Steel Structures to Corrosion Degradation in Salivary Solutions in the Presence of Lactic Acid

In the field of healthcare and dentistry, 316L stainless steel is widely used for its corrosion resistance. However, the presence of lactic acid in salivary solutions can affect its surface reactivity. This study employed electrochemical methods to investigate the influence of lactic acid on 316L stainless steel's corrosion resistance in Fusayama Meyer saliva and saliva doped with varying lactic acid concentrations. The results revealed a significant decrease in polarization resistance as the lactic acid concentration increased, despite a shift toward more positive corrosion potentials. Consequently, the study suggests that the lactic acid presence in salivary solutions should be considered when evaluating the corrosion susceptibility of 316L stainless steel devices.

Detoxification of wood-combustion ashes containing Cr and Cd by thermal treatment

This study assesses the potential of thermal processing for detoxification of wood-combustion ashes that contain high levels of Cr and Cd. Thermal treatment (1000 °C) of bottom ash and fly ash in an oxidising gas (air) atmosphere resulted in: low volatilisation of Cd and most other heavy metals, oxidation of Cr in the ashes to Cr (VI), and, in the case of the fly ash, significantly increased leaching of Cr and Mo. Thermal treatment in a nitrogen atmosphere resulted in local reducing conditions due to oxidation of ash-derived carbon to CO (g). Thermal treatments in this atmosphere and in a reducing atmosphere consisting of 10 % H₂ and the balance N₂ detoxified the ashes in at least two ways: (i) by substantially removing Cd, Pb, Bi, Tl, and, in the case of the fly ash, Zn from the ashes by volatilisation; and (ii) by thermal reduction of Cr (VI) in the ashes. There was at least a 100-fold reduction in the leaching of total Cr from both the bottom ash and the fly ash following the thermal treatments in reducing conditions. Chromium only leached from the detoxified bottom ash to a significant extent in acidic conditions (pH < 4).

Chacón-Nava J, Almeraya-Calderón F. Alternative to Nitric Acid Passivation of 15-5 and 17-4PH Stainless Steel Using Electrochemical Techniques

Increasingly stringent environmental regulations in different sectors of industry, especially the aeronautical sector, suggest the need for more investigations regarding the effect of environmentally friendly corrosion protective processes. Passivation is a finishing process that makes stainless steels more rust resistant, removing free iron from the steel surface resulting from machining operations. This results in the formation of a protective oxide layer that is less likely to react with the environment and cause corrosion. The most commonly used passivating agent is nitric acid. However, it is know that high levels of toxicity can be generated by using this agent. In this work, a study has been carried out into the electrochemical behavior of 15-5PH (precipitation hardening) and 17-4PH stainless steels passivated with (a) citric and (b) nitric acid solutions for 60 and 90 min at 49 °C, and subsequently exposed to an environment with chlorides. Two electrochemical techniques were used: electrochemical noise (EN) and potentiodynamic polarization curves (PPC) according to ASTM G199-09 and ASTM G5-13, respectively. The results obtained indicated that, for both types of steel, the passive layer formed in citric acid as passivating solution had very similar characteristics to that formed with nitric acid. Furthermore, after exposure to the chloride-containing solution and according with the localization index (LI) values obtained, the stainless steels passivated in citric acid showed a mixed type of corrosion, whereas the steels passivated in nitric acid showed localized corrosion. Overall, the results of the R n values derived show very low and similar corrosion rates for the stainless steels passivated with both citric and nitric acid solutions.

Surface-protein interactions on different stainless steel grades: effects of protein adsorption, surface changes and metal release

Implantation using stainless steels (SS) is an example where an understanding of protein-induced metal release from SS is important when assessing potential toxicological risks. Here, the protein-induced metal release was investigated for austenitic (AISI 304, 310, and 316L), ferritic (AISI 430), and duplex (AISI 2205) grades in a phosphate buffered saline (PBS, pH 7.4) solution containing either bovine serum albumin (BSA) or lysozyme (LSZ). The results show that both BSA and LSZ induce a significant enrichment of chromium in the surface oxide of all stainless steel grades. Both proteins induced an enhanced extent of released iron, chromium, nickel and manganese, very significant in the case of BSA (up to 40-fold increase), whereas both proteins reduced the corrosion resistance of SS, with the reverse situation for iron metal (reduced corrosion rates and reduced metal release in the presence of proteins). A full monolayer coverage is necessary to induce the effects observed.