Determination of Bismuth in Bottled and Mineral Water Samples at Trace Levels by T-Shaped Slotted Quartz tube-Atom Trap-Flame Atomic Absorption Spectrometry

Development of a Paper-Based Analytical Method for the Selective Colorimetric Determination of Bismuth in Water Samples

A novel, direct and simple colorimetric method employing μicroanalytical paper-based devices (μ-PADs) for the selective determination of bismuth is described. The suggested method exploits the colorimetric variation of bismuth after its rapid reaction with methyl thymol blue (MTB) in an acidic medium (pH ranging between 0.7 and 3.0), modified with nitric acid, on the surface of a paper device at room temperature. The devices are low cost, composed of chromatographic paper and wax barriers and the analytical protocol is easily applicable with minimal technical expertise and without the need for experimental apparatus. The user must add a test sample and read the color intensity of the colored Bi(III)–MTB complex formed at the sensing area using a simple imaging device such as a flatbed scanner. Various chemical variables, such as HNO3 and MTB concentration, reaction time, ionic strength, detection zone size and photo-capture detector are optimized. A study of interfering ions such as K+, Na+, Ca2+, Mg2+, Cl−, SO42− and HCO3− was also conducted. The stability of the paper devices is also studied in different maintenance conditions with particularly satisfactory results, rendering the method suitable for field analysis. The detection limits are as low as 3.0 mg L−1 with very satisfactory precision, ranging from 4.0% (intra-day) to 5.5% (inter-day). Natural water samples are successfully analyzed, and bismuth percentage recoveries were calculated in the range of 82.8 to 115.4%.

Determination of nickel in daphne tea extract and lake water samples by flame atomic absorption spectrophotometry with a zirconium-coated T-shaped slotted quartz tube-atom trap and photochemical vapor generation sample introduction

Nickel determination is important because of its use in many industrial areas and its negative effects on human health. In this study, an ultraviolet-based photochemical vapor generation (UV-PVG) setup was combined with a T-shaped zirconium-coated slotted quartz tube-atom trapping (T-SQT-AT) apparatus to boost the sensitivity of a flame atomic absorption spectrophotometer for nickel determination. Nickel was separated from the sample matrix by converting it into its volatile species prior to online preconcentration by trapping on the zirconium-coated T-SQT inner surface. Analytical performance was maximized by optimizing all variable conditions. The limit of detection (LOD) and limit of quantification (LOQ) were found as 10 and 33 µg/L, respectively. Daphne tea and lake water samples were analyzed under optimum conditions, and there was no detectable nickel in the samples. For this purpose, spiking experiments were carried out for the samples in order to evaluate the applicability and accuracy of the method. The percent recovery values calculated for the two samples spiked at three different concentrations ranged between 90 and 112%. To our best knowledge, this is the first study in literature where UV-PVG was combined with T-SQT-AT for the determination of nickel in daphne tea and lake water samples prior to FAAS determination.

An accurate and sensitive analytical strategy for the determination of palladium in aqueous samples: slotted quartz tube flame atomic absorption spectrometry with switchable liquid-liquid microextraction after preconcentration using a Schiff base ligand

This study presents a green analytical method for palladium determination by slotted quartz tube flame atomic absorption spectrometry (SQT-FAAS) following switchable liquid-liquid microextraction (SLLME). Efficient extraction of palladium was facilitated by complexation with a Schiff base ligand, synthesized specifically for this study. A three-stage thorough optimization procedure was carried out to boost the absorbance output of palladium. Complex formation was the first stage, and parameters evaluated included buffer solution pH and amount, concentration of ligand, and mixing period. The amount of switchable solvent and concentration and amount of sodium hydroxide and acid amount were optimized in the second stage. Optimization of sample and fuel flow rates and SQT parameters completed the third stage of optimization, and all optimum parameters were used to determine analytical performance of the method. The method had a broad linear dynamic range, and the calibration plots showed good linearity with R² values greater than 0.9991. The limits of detection and quantification of the SLLME-SQT-FAAS method were 15 and 50 μg/L, respectively. The precision of the method, expressed as percent relative standard deviation, was below 9.0% for all measurements. Spiked recovery results performed for a palladium electroplating bath solution gave poor results when quantified against aqueous calibration standards. Matrix matching was therefore used to improve recovery results which ranged between 97 and 105% for four different spike concentrations.