Adsorption studies of Cibacron Blue onto both untreated and chemically treated pistachio shell powder from aqueous solutions

Removal of Azo Dyes from Water Using Natural Luffa cylindrica as a Non-Conventional Adsorbent

Reducing high concentrations of pollutants such as heavy metals, pesticides, drugs, and dyes from water is an emerging necessity. We evaluated the use of Luffa cylindrica (Lc) as a natural non-conventional adsorbent to remove azo dye mixture (ADM) from water. The capacity of Lc at three different doses (2.5, 5.0, and 10.0 g/L) was evaluated using three concentrations of azo dyes (0.125, 0.250, and 0.500 g/L). The removal percent (R%), maximum adsorption capacity (Qm), isotherm and kinetics adsorption models, and pH influence were evaluated, and Fourier-transform infrared spectroscopy and scanning electron microscopy were performed. The maximum R% was 70.8% for 10.0 g L-1Lc and 0.125 g L-1 ADM. The Qm of Lc was 161.29 mg g-1. Adsorption by Lc obeys a Langmuir isotherm and occurs through the pseudo-second-order kinetic model. Statistical analysis showed that the adsorbent dose, the azo dye concentration, and contact time significantly influenced R% and the adsorption capacity. These findings indicate that Lc could be used as a natural non-conventional adsorbent to reduce ADM in water, and it has a potential application in the pretreatment of wastewaters.

Abalone shell-based magnetic macroporous hydroxyapatite microspheres with good reusability for efficient dye adsorption

Azo dye methyl orange (MO) and shell rotting cause great environmental pollution. Most of the common dye adsorbents are difficult to produce, not environmentally friendly and it is always difficult to utilize the shell resources effectively. In this study, shell-based economical and environmentally friendly magnetic hydroxyapatite microsphere adsorbents (Fe3O4 @SiO2/HAP) were developed for the removal of MO from simulated wastewater by sol-gel and hydrothermal synthesis methods. The effects of solution pH, initial concentration, adsorption time and system temperature on the adsorption effect were investigated, and the repeat recovery performance was explored. The equilibrium adsorption data follow the Freundlich isotherm and pseudo-second-order kinetic curves, and the analysis indicates that the adsorption process is spontaneously exothermic. The adsorption capacities of MO were up to 94.48% and 88.94%, under the acidic environment of pH = 4, respectively, and had good recycling performance. The results provide a high-value utilization pathway for waste shell resources and focus on the removal of azo dyes. This is expected to provide new development ideas for the environmental hazards caused by acid dye wastewater discharged into rivers and oceans, as well as the problems of soil pollution and resource waste caused by weathering and corrosion of shells.

Alkaline etched hydrochar-based magnetic adsorbents produced from pharmaceutical industry waste for organic dye removal

A large amount of pharmaceutical industry waste (PIW) was inevitably produced every year, and the PIW can be degraded by high temperature reaction to form porous structures. The study proposed an innovative pathway to valorize PIW with hydrothermal carbonization (HTC) coupled with alkali etching (AE). Without adding any additives, magnetic hydrochar could be generated with rough surface topography and suitable specific surface area (S_BET) by this method. Effects of HTC conditions and alkaline solution concentrations on the physicochemical and adsorption properties of PIW were investigated, and adsorption mechanism was explored. Based on evaluations of the magnetism, cyclic regeneration, and heavy metal leaching properties of the products, the feasibility of preparing magnetic adsorbents with solid waste by HTC coupled AE was established. The alkaline etching pharmaceutical industry waste (AEPIW) hydrochar showed the highest S_BET (54.64 m²/g) after the PIW was treated by 260 °C for 2 h plus 1 mol/L KOH. The removal rate of methylene blue (MB) could exceed 90% and the saturated magnetization was ~8 emu/g. The proposed new method was able to convert the low-value solid industrial waste into high-performance hydrochar-based magnetic adsorbents, which was tested to have a capability to efficiently and sustainably remove organic pollutants from water.

Decolorization of textile azo dye Novacron Red using bacterial monoculture and consortium: Response surface methodology optimization

The present study was intended toward the optimization of a textile dye Novacron Red decolorization by single and mixed culture of Bacillus strains namely, B. firmus, B. filamentosus and B. subterraneus. Optimization of dye decolorization using Bacillus monocultures was conducted using central composite design. The maximum dye decolorization achieved under optimized conditions for B. firmus, B. filamentosus and B. subterraneus was 89.24%, 88.28% and 88.45%, respectively. The effect of various consortia of selected Bacillus strains on dye removal was evaluated by applying a mixture design. The best dye (100 mg/L) decolorization yield (84%) was achieved using the consortium of B. filamentosus and B. subetrraneus.The Fourier Transform Infrared Spectroscopy analyses confirmed biodegradation potential of the two Bacillus strains. The results highlighted the potential of mono- and co-cultures of Bacillus strains for application in textile wastewater treatment. PRACTITIONER POINTS: Novel dye-decolorizing Bacillus strains were isolated from marine sediment. Optimization of decolorization was conducted using response surface methodology. Efficient decolorization of textile dye by Bacillus strains on mono- and co-cultures. The efficiency of the consortium B. filamentosus and B. subetrraneus on dye removal.