Biotechnological strategies for the modification of food lipids

Modification of palm-based oil blend via interesterification: Physicochemical properties, crystallization behaviors and oxidative stabilities

Interesterification is widely employed as an effective technique to modify oils and fats. This study utilizes palm-based oil (palm olein: palm kernel oil: palm stearin, 5:3:2, w/w/w) as the raw material for the interesterification process performed in a pilot-scale packed bed reactor. Enzymatic interesterification (EIE) was catalyzed by Lipozyme TL IM (813.0 g) at 60℃ with reaction flow rate of 100 mL/min. Chemical interesterification (CIE) was catalyzed using sodium methoxide (0.3 wt%) as catalyst at 105 °C for 30 min. The results showed that the EIE fats had lower solid fat content tendency compared to that of CIE fats. The crystallization onset temperature was higher in EIE fats (23.09℃) compared to that of CIE (19.08℃). The results were consistent with the crystallization kinetics whereby the Avrami K constants of EIE fats were higher than that of CIE fats at various temperatures, indicating rapid crystallization and instant nucleation. Linear growth mechanism was dominant and the crystals formed were smaller in size as observed using polarized light microscope. The interesterified fats exhibited the presence of β and β'-crystals. While most of the tocopherol content was retained after EIE (386.18 ug/g), the molecular distillation process reduced the tocopherol concentration (110.01 ug/g) which consequently affected the oxidative stability. The findings in this work contribute to the fundamental understanding on the differences between CIE and EIE fats and provides data to support the preparation of modified fats via EIE that shows great potential as a controllable technique for industrialization.

Quantitation of triacylglycerols in plant oils using HPLC with APCI-MS, evaporative light-scattering, and UV detection

The main constituents of plant oils are complex mixtures of TGs differing in acyl chain lengths, number and positions of double bonds, and regioisomerism. A non-aqueous reversed-phase HPLC method with acetonitrile-2-propanol gradient and 30 + 15 cm NovaPak C18 columns makes possible an unambiguous identification of the highest number of TGs ever reported for these oils, based on positive-ion APCI mass spectra. A new approach to TG quantitation is based on the use of response factors with three typical detection techniques for that purpose (APCI-MS, evaporative light-scattering detection, and UV at 205 nm). Response factors of 23 single-acid TGs (saturated TGs from C7 to C22, 7 unsaturated TGs), 4 mixed-acid TGs, diolein and monoolein are calculated from their calibration curves and related to OOO. Due to differences between saturated and unsaturated acyl chains, the use of response factors significantly improves the quantitation of TGs. 133 TGs containing 22 fatty acids with 8-25 carbon atoms and 0-3 double bonds are identified and quantified in 9 plant oils (walnut, hazelnut, cashew nut, almond, poppy seed, yellow melon, mango, fig, date) using HPLC/APCI-MS with a response factor approach. Average parameters and relative fatty acid concentrations are calculated with both HPLC/APCI-MS and GC/ FID.

The combined use of whole Cuphea seeds containing medium chain fatty acids and an exogenous lipase in piglet nutrition

In search for an alternative for nutritional antimicrobials in piglet feeding, the effects of adding whole Cuphea seeds, as a natural source of medium chain fatty acids (MCFA), with known antimicrobial effects, and an exogenous lipase to a weaner diet were studied. The foregut flora, the gut morphology, some digestive parameters and the zootechnical performance of weaned piglets were investigated. Thirty newly weaned piglets, initial weight 7.0 +/- 0.4 kg, were divided according to litter, sex and weight in two groups (control diet; Cuphea + lipase diet). The Cuphea seeds (lanceolata and ignea) (50 g kg(-1)) were substituted for soybean oil (15 g kg(-1)), Alphacell (25 g kg(-1)) and soy protein isolate (10 g kg(-1)) in the control diet. Also 500 mg kg(-1) microbial lipase was added to the Cuphea diet. The piglets were weighted individually on days 0, 3. 7, 14 and 16. Feed intake was recorded per pen during days 0 to 3, 3 to 7, 7 to 14 and 14 to 16. On day 7 five piglets of each experimental group were euthanized for counting the gastric and small intestinal gut flora and for gut morphology at two sites of the small intestine (proximal, distal). The results indicate a trend towards improved performances parameters by feeding Cuphea + lipase. The enzymic released MCFA (1.7 g kg(-1) fresh gastric contents) tended to decrease the number of Coliforms in the proximal small intestine, but increased the number in the stomach and distal small intestine. With Culphea, the number of Streptococci was significantly lower in small intestine, but not in the stomach, while the number of Lactobacilli was significantly lower in the distal small intestine and tended to be lower in the stomach and proximal small intestine. No differences between the diets were noted for the total anaerobic microbial load in the stomach or in the gut. Feeding Cuphea + lipase resulted in a significantly greater villus height (distal small intestine) and a lesser crypt depth (proximal and distal small intestine) and greater villus/crypt ratio depth (proximal and distal small intestine). The intra-epithelial lymphocyte (IEL) counts per 100 enterocytes were significantly decreased in the proximal small intestine and tended to decrease in the distal small intestine by feeding the Cuphea + lipase diet. Both phenomena are indicative for a more healthy and better functional state of the mucosa. Present results are in line with foregoing research, showing that manipulation of the gut ecosystem by the enzymic in situ released MCFA in the stomach and foregut can result in improved performances of the piglets, which makes the concept a potential alternative for in-feed nutritional antibiotics.

Quantification of the ratio of positional isomer dilinoleoyl-oleoyl glycerols in vegetable oils

The distribution of fatty acids in a triacylglycerol is of great importance from nutritional, biochemical, quality and technological points of view. The ratio of triacylglycerol positional isomers containing two linoleic acid (18:2) and one oleic acid (18:1) moieties--namely, 1(3),2-dilinoleoyl-3(1)-oleoyl glycerol (LLO) and 1,3-dilinoleoyl-2-oleoyl glycerol (LOL)--were quantified in grape seed, olive, pumpkin seed, soybean, sunflower and wheat germ oils by high-performance liquid chromatography/atmospheric pressure chemical ionization mass spectrometry (HPLC/APCI-MS) in selected ion monitoring (SIM) mode. Relative LOL contents (LOL/(LLO+LOL)) of the oils were calculated from the mass abundances of the [LL]+ and [LO]+ diacylglycerol fragment ions ([M+H-RCOOH]+) using a calibration curve. The calibration curve of the relative diacylglycerol mass abundances was measured in SIM mode. The relative LOL contents were found to be relatively consistent for each oil variety. The relative LOL content in grape seed, sunflower, pumpkin seed, soybean and wheat germ oils accounted for 44.2 +/- 2.6, 26.8 +/- 3.2, 16.7 +/- 4.6, 15.9 +/- 2.9 and 13.9 +/- 4.3%, respectively. Only olive oils contained practically 100% of the LLO isomer. These results indicate that the unsaturated fatty acids such as linoleic and oleic acids have 'non-random' distribution patterns in various oils.