Polyethylenglycol-co-poly-D,L-lactide copolymer based microspheres: preparation, characterization and delivery of a model protein

Co-delivery of glial cell-derived neurotrophic factor (GDNF) and tauroursodeoxycholic acid (TUDCA) from PLGA microspheres: potential combination therapy for retinal diseases

Retinitis pigmentosa (RP) is a group of genetically diverse inherited disorders characterised by the progressive photoreceptors and pigment epithelial cell dysfunction leading to central vision impairment. Although important advances in the understanding of the pathophysiologic pathways involved in RP have been made, drug delivery for the treatment of ocular disorders affecting the posterior segment of the eye is still an unmet clinical need. In the present study, we describe the development of multi-loaded PLGA-microspheres (MSs) incorporating two neuroprotectants agents (glial cell-line-derived neurotrophic factor-GDNF and Tauroursodeoxycholic acid-TUDCA) as a potential therapeutic tool for the treatment of RP. A solid-in-oil-in-water (S/O/W) emulsion solvent extraction-evaporation technique was employed for MS preparation. A combination of PLGA and vitamin E was used to create the microcarriers. The morphology, particle size, encapsulation efficiency and in vitro release profile of the MSs were studied. Encapsulation efficiencies of GDNF and TUDCA for the initial multiloaded MSs, prepared with methylene chloride (MC) as organic solvent and polyvinyl alcohol (PVA) solution in the external phase, were 28.53±0.36% and 45.65±8.01% respectively. Different technological parameters to optimise the formulation such as the incorporation of a water-soluble co-solvent ethanol (EtOH) in the internal organic phase, as well as NaCl concentration, and viscosity using a viscosizing agent (hydroxypropyl methylcellulose-HPMC) in the external aqueous phase were considered. EtOH incorporation and external phase viscosity of the emulsion were critical attributes for improving drug loading of both compounds. In such a way, when using a methylene chloride/EtOH ratio 75:25 into the inner organic phase and the viscosity agent HPMC (1% w/v) in the external aqueous phase, GDNF and TUDCA payloads resulted 48.86±1.49% and 78.58±10.40% respectively, and a decrease in the initial release of GDNF was observed (22.03±1.41% compared with 40.86±6.66% of the initial multi-loaded formulation). These optimised microparticles exhibited sustained in vitro releases over 91 days. These results suggest that the microencapsulation procedure optimised in this work presents a promising technological strategy for the development of multi-loaded intraocular drug delivery systems (IODDS).

Polyethylene Glycol-Poly-Lactide-co-Glycolide Block Copolymer-Based Nanoparticles as a Potential Tool for Off-Label Use of N-Acetylcysteine in the Treatment of Diastrophic Dysplasia

Potential off-label therapeutic role of N-acetylcysteine (N-Ac) was recently demonstrated in the treatment of diastrophic dysplasia (DTD) using mutant mice; its main drawback is the rapid clearance from blood due to the liver metabolism. Our goal was to investigate the potential of polyethylene glycol polylactide-co-glycolide block copolymer (PLGA-PEG)-based nanoparticles (NPs) in order to improve in vivo biodistribution performances and N-Ac pharmacokinetic profile after subcutaneous administration in mice. Results suggest that N-Ac can be effectively loaded into NPs (about 99 μg/mg NPs) using a suitably optimized nanoprecipitation method. Thanks to the good physical characteristics (mean diameter <100 nm, zeta potential about -8 mV) NPs can reach skeletal tissue in particular femoral head and proximal tibia epiphysis at the sixth hour after injection, remaining in the tissues till 24 h. Furthermore, pharmacokinetic study revealed a sustained N-Ac concentration in plasma with a peak concentration of 2.48 ± 1.72 μM at the 24th hour after injection. Overall, results highlight the actual interest of N-Ac-loaded PLGA-PEG NPs as useful platform for N-Ac parenteral administration.

Empirical search for factors affecting mean particle size of PLGA microspheres containing macromolecular drugs

BACKGROUND AND OBJECTIVES

Poly(lactic-co-glycolic acid) (PLGA) has become one of the most promising in design, development, and optimization for medical applications polymers. PLGA-based multiparticulate dosage forms are usually prepared as microspheres where the size is from 5 to 100 µm, depending on the route of administration. The main objectives of the study were to develop a predictive model of mean volumetric particle size and on its basis extract knowledge of PLGA containing proteins forming behaviour.

METHODS

In the present study, a model for the prediction of mean volumetric particle size developed by an rgp package of R environment is presented. Other tools like fscaret, monmlp, fugeR, MARS, SVM, kNNreg, Cubist, randomForest and piecewise linear regression are also applied during the data mining procedure.

RESULTS

The feature selection provided by the fscaret package reduced the original input vector from a total of 295 input variables to 10, 16 and 19. The developed models had good predictive ability, which was confirmed by a normalized root-mean-square error (NRMSE) of 6.8 to 11.1% in 10-fold cross validation training procedure. Moreover, the best models were validated using external experimental data. The superior predictiveness had a model obtained by rgp in the form of a classical equation with a normalized root-mean-squared error (NRMSE) of 6.1%.

CONCLUSIONS

A new approach is proposed for computational modelling of the mean particle size of PLGA microspheres and rules extraction from tree-based models. The feature selection leads to revealing chemical descriptor variables which are important in predicting the size of PLGA microspheres. In order to achieve better understanding in the relationships between particle size and formulation characteristics, the surface analysis method and rules extraction procedures were applied.

An experimental design approach to the preparation of pegylated polylactide-co-glicolide gentamicin loaded microparticles for local antibiotic delivery

The present paper takes into account the DOE application to the preparation process of biodegradable microspheres for osteomyelitis local therapy. With this goal gentamicin loaded polylactide-co-glycolide-copolyethyleneglycol (PLGA-PEG) microspheres were prepared and investigated. Two preparation protocols (o/w and w/o/w) with different process conditions, and three PLGA-PEG block copolymers with different compositions of lactic and glycolic acids and PEG, were tested. A Design Of Experiment (DOE) screening design was applied as an approach to scale up manufacturing step. The results of DOE screening design confirmed that w/o/w technique, the presence of salt and the 15%w/v polymer concentration positively affected the EE% (72.1-97.5%), and span values of particle size distribution (1.03-1.23), while salt addition alone negatively affected the yield process. Process scale up resulted in a decrease of gentamicin EE% that can be attributed to the high volume of water used to remove PVA and NaCl residues. The results of in vitro gentamicin release study show prolonged gentamicin release up to three months from the microspheres prepared with salt addition in the dispersing phase; the behavior being consistent with their highly compact structure highlighted by scanning electron microscopy analysis. The prolonged release of gentamicin is maintained even after embedding the biodegradable microspheres into a thermosetting composite gel made of chitosan and acellular bovine bone matrix (Orthoss® granules), and the microbiologic evaluation demonstrated the efficacy of the gentamicin loaded microspheres on Escherichia coli. The collected results confirm the feasibility of the scale up of microsphere manufacturing process and the high potential of the microparticulate drug delivery system to be used for the local antibiotic delivery to bone.

Critical attributes of formulation and of elaboration process of PLGA-protein microparticles

Low drug loading, burst effect during release and drug inactivation account for the main drawbacks of protein microencapsulation in poly(d,l-lactic-co-glycolic) acid (PLGA) matrix by the water-in oil-in water (W/O/W) solvent evaporation method. Thus, the current study was set to invest the critical attributes of formulation and of elaboration process which determine protein loading into microparticles as well as its further release, using albumin as protein model. NaCl concentration in the external aqueous phase, poly(vinyl alcohol) (PVA) concentration and mostly viscosity of both the internal aqueous phase and the organic phase were critical attributes for improving drug loading, with polymer molecular weight and hydrophobicity likewise directly related to albumin loading. In such a way, when using 0.5% PVA as internal aqueous phase the highest albumin loading was achieved. Optimized microparticles exhibited a sustained in vitro release of albumin over 130 days. The influence of the microencapsulation process on albumin stability and biological activity was evaluated by carrying out cell proliferation assays on PC12 cells with albumin released from microparticles. Such assay demonstrated that the microencapsulation procedure optimized in this study did not affect the biological stability of the microencapsulated protein.

Prospects of pharmaceuticals and biopharmaceuticals loaded microparticles prepared by double emulsion technique for controlled delivery

Several methods and techniques are potentially useful for the preparation of microparticles in the field of controlled drug delivery. The type and the size of the microparticles, the entrapment, release characteristics and stability of drug in microparticles in the formulations are dependent on the method used. One of the most common methods of preparing microparticles is the single emulsion technique. Poorly soluble, lipophilic drugs are successfully retained within the microparticles prepared by this method. However, the encapsulation of highly water soluble compounds including protein and peptides presents formidable challenges to the researchers. The successful encapsulation of such compounds requires high drug loading in the microparticles, prevention of protein and peptide degradation by the encapsulation method involved and predictable release, both rate and extent, of the drug compound from the microparticles. The above mentioned problems can be overcome by using the double emulsion technique, alternatively called as multiple emulsion technique. Aiming to achieve this various techniques have been examined to prepare stable formulations utilizing w/o/w, s/o/w, w/o/o, and s/o/o type double emulsion methods. This article reviews the current state of the art in double emulsion based technologies for the preparation of microparticles including the investigation of various classes of substances that are pharmaceutically and biopharmaceutically active.