Preparation and characterization of ketorolac tromethamine-loaded ethyl cellulose micro-/nanospheres using different techniques

Preparation and Properties of Sodium Carboxymethyl Cellulose Microspheres by Dropping Method

Sodium carboxymethyl cellulose (CMC) is the most extensively utilized derivative of cellulose. In this study, an innovative approach was employed to disperse a CMC aqueous solution into olive oil in the form of liquid droplets, resulting in the direct formation of CMC microspheres after drying. The effects of CMC concentration and needle aperture size on microsphere formation were systematically investigated, showing that the particle size of the microspheres decreased with an increase in CMC concentration and a decrease in needle aperture. The CMC-based microspheres exhibited a consistently uniform spheroid morphology with particle sizes ranging from 1.5 to 2.5 mm, and a three-dimensional uniform polymeric network structure. Furthermore, the drug loading efficiency of the CMC-based olive oil microspheres reached 82.18%, which was markedly superior to that of other cellulose-based microspheres for fat-soluble substances. The CMC-based vitamin C (VC) microspheres exhibited an ultimate drug loading efficiency of approximately 24%, and their maximum encapsulation efficiency was 78.57% at a VC concentration of 30%, which was significantly higher than that of starch-based VC microspheres. Additionally, the CMC-based VC microspheres realized a sustained and stable release rate in ethanol at 30 °C.

Current research status, applications and challenges of ketorolac-based sustained-release and controlled-release formulations

Ketorolac, a nonsteroidal anti-inflammatory drug, exhibits moderate antipyretic and anti-inflammatory properties, as well as potent analgesic effects. It is widely used in clinical practice for pain relief in cases of mild and severe pain such as postoperative pain, fractures, sprains, toothaches and cancer pain. Due to its relatively short half-life, patients experiencing pain often need frequent injections or oral medications, leading to poor patient compliance. Thus, it is crucial to create long-acting sustained-release formulations of ketorolac. This paper provides an overview of the research, applications, and challenges associated with ketorolac sustained-release formulations over the past decade, based on a comprehensive review of the literature. The aim is to provide fresh insights for the research and development of long-acting, sustained-release, and controlled-release formulations of ketorolac.

Development and in vitro-in vivo evaluation of ocular insert containing ketorolac tromethamine and moxifloxacin hydrochloride

PURPOSE

Conjunctivitis is a common eye disorder that causes swelling and inflammation of the conjunctiva. Topical dosage form containing antibiotics and non-steroidal anti-inflammatory drugs are prescribed for the treatment and in order to overcome problems of conventional dosage forms the present study aims to develop an ocular insert containing moxifloxacin HCl and ketorolac tromethamine.

METHODS

Insert was prepared by a solvent casting method by taking different polymers PVA, PVP K-30, and a combination of both as film-forming polymer, and glycerol as a plasticizer and characterized by various parameters like thickness, folding endurance, pH, swelling index, drug content, mechanical properties, in vitro and in vivo release study.

RESULTS

The formulation prepared by a combination of both polymers demonstrated significantly improved properties including % elongation, tensile strength, swelling index, drug content and drug release compared to the formulation made with single polymer. The in vitro release data indicated that the batch R8 exhibited sustain release of drug (85% release in 10 hr) and following the Higuchi model for release kinetics. In vivo, study in rabbit eyes revealed the sustained release of the drug up to 16 hr with a good correlation between in vitro and in vivo release data.

CONCLUSION

From the study, it can be concluded that the developed ocular insert can be a promising formulation for rational therapy of conjunctivitis.

Ketorolac-Loaded PLGA-/PLA-Based Microparticles Stabilized by Hyaluronic Acid: Effects of Formulation Composition and Emulsification Technique on Particle Characteristics and Drug Release Behaviors

This study aimed to develop ketorolac microparticles stabilized by hyaluronic acid based on poly(lactide-co-glycolide) (PLGA), poly(lactide) (PLA), and their blend for further application in osteoarthritis. The polymer blend may provide tailored drug release and improved physicochemical characteristics. The microparticles were prepared by water-in-oil-in-water (w/o/w) double emulsion solvent evaporation using two emulsification techniques, probe sonication (PS) and high-speed stirring (HSS), to obtain the microparticles in different size ranges. The results revealed that the polymer composition and emulsification technique influenced the ketorolac microparticle characteristics. The PS technique provided significantly at least 20 times smaller average size (1.3-2.2 µm) and broader size distribution (1.5-8.5) than HSS (45.5-67.4 µm and 1.0-1.4, respectively). The encapsulation efficiency was influenced by the polymer composition and the emulsification technique, especially in the PLA microparticles. The DSC and XRD results suggested that the drug was compatible with and molecularly dissolved in the polymer matrix. Furthermore, most of the drug molecules existed in an amorphous form, and some in any crystalline form. All of the microparticles had biphasic drug release composed of the burst release within the first 2 h and the sustained release over 35 days. The obtained microparticles showed promise for further use in the treatment of osteoarthritis.

Microfluidics in drug delivery: review of methods and applications

Microfluidics technology has emerged as a promising methodology for the fabrication of a wide variety of advanced drug delivery systems. Owing to its ability for accurate handling and processing of small quantities of fluidics as well as immense control over physicochemical properties of fabricated micro and nanoparticles (NPs), microfluidic technology has significantly improved the pharmacokinetics and pharmacodynamics of drugs. This emerging technology has offered numerous advantages over the conventional drug delivery methods for fabricating of a variety of micro and nanocarriers for poorly soluble drugs. In addition, a microfluidic system can be designed for targeted drug delivery aiming to increase the local bioavailability of drugs. This review spots the light on the recent advances made in the area of microfluidics including various methods of fabrication of drug carriers, their characterization, and unique features. Furthermore, applications of microfluidic technology for the robust fabrication and development of drug delivery systems, the existing challenges associated with conventional fabrication methodologies as well as the proposed solutions offered by microfluidic technology have been discussed in details.HighlightsMicrofluidic technology has revolutionized fabrication of tunable micro and nanocarriers.Microfluidic platforms offer several advantages over the conventional fabrication methods.Microfluidic devices hold great promise in controlling the physicochemical features of fabricated drug carriers.Micro and nanocarriers with controllable release kinetics and site-targeting efficiency can be fabricated.Drug carriers fabricated by microfluidic technology exhibited improved pharmacokinetic and pharmacodynamic profiles.

Construction of multifunctional NH2-UiO-66 metal organic framework: sensing and photocatalytic degradation of ketorolac tromethamine and tetracycline in aqueous medium

Existence of pharmaceutical residues in water has endangered environmental pollution worldwide, which makes it ineludible to develop prospective bifunctional materials which not only possess excellent fluorescence behaviour to monitor pharmaceuticals but also exhibit simultaneous photocatalytic removal efficiency. Strengthened by functionalized metal organic framework (MOF) materials, we present here an amine functionalized zirconium-based MOF NH₂-UiO-66 which has been successfully synthesized using solvothermal approach. The as prepared MOF was subjected to numerous structural, morphological and compositional characterizations. Interestingly, featured by the excellent fluorescent intensity of MOF modulated by LMCT effect, NH₂-UiO-66 was screened to detect pharmaceutical compounds with KTC and TC in aqueous solution. The prepared functionalized MOF showcased excellent sensing platform with magnificent response range (0‒3 µM), lower limit of detection (160 nM; KTC and 140 nM; TC), excellent selectivity and influential anti-interference capability. More importantly, the practical utility of the proposed sensor was further explored for the determination of pharmaceutical drugs in real water samples with suitable recoveries. Simultaneously, the synthesized MOF also exhibited high photocatalytic efficiency towards the removal of KTC and TC under solar light irradiation. The degradation efficiency for KTC and TC was found to be 68.3% and 71.8% within 60 and 280 min of solar light, respectively. Moreover, excellent recyclability was demonstrated by the current synthesized system over five cycles. Overall, this study presents a feasible route for the utilization of functionalized MOFs as potential dual functional materials towards the simultaneous detection and degradation of specific pharmaceuticals from aqueous medium.

In-vitro and in-vivo evaluation of biocompatible polymeric microgels for pH- driven delivery of Ketorolac tromethamine

The aim of the current study was to prepare glutamic acid crosslinked poly(itaconic acid/methacrylic acid) microgels for pH-responsive delivery of ketorolac tromethamine, using aqueous free radical polymerization technique. The polymerization of polymer with monomers was carried out by a crosslinking agent N', N'-methylene bisacrylamide in the presence of initiator ammonium persulfate. The prepared microgels were characterized for structure, surface morphology, thermal stability, and crystallinity. Similarly, studies such as sol-gel analysis, drug loading, and polymer volume fraction were performed for the fabricated microgels. The pH-sensitivity of the developed microgels was investigated at three different pH values i.e., pH 1.2, 4.6, and 7.4 by swelling and in-vitro drug release studies. Maximum swelling and drug release were found at pH 7.4 as compared to pH 1.2 and 4.6, which indicated the pH-sensitive nature of the prepared microgels. The toxicity of the prepared microgels was evaluated by cell line and HET-CAM test, which demonstrated no toxic effect of the prepared microgels. In-vivo study was carried out on rabbits and high plasma concentration was reported for the drug loaded microgels as compared to drug solution and commercial product Keten. Hence, the prepared microgel system could be employed as an excellent carrier for the controlled drug delivery system.

Preparation of pH-Responsive Hydrogels Based on Chondroitin Sulfate/Alginate for Oral Drug Delivery

This study investigates pH-sensitive hydrogels based on biocompatible, biodegradable polysaccharides and natural polymers such as chondroitin sulfate and alginate in combination with synthetic monomer such as acrylic acid, as controlled drug carriers. Investigations were conducted for chondroitin sulfate/alginate-graft-poly(acrylic acid) hydrogel in various mixing ratios of chondroitin sulfate, alginate and acrylic acid in the presence of ammonium persulfate and N',N'-Methylene bisacrylamide. Crosslinking and loading of drug were confirmed by Fourier transform infrared spectroscopy. Thermal stability of both polymers was enhanced after crosslinking as indicated by thermogravimetric analysis and differential scanning calorimeter thermogram of developed hydrogel. Similarly, surface morphology was evaluated by scanning electron microscopy, whereas crystallinity of the polymers and developed hydrogel was investigated by powder X-ray diffraction. Furthermore, swelling and drug-release studies were investigated in acidic and basic medium of pH 1.2 and 7.4 at 37 °C, respectively. Maximum swelling and drug release were detected at pH 7.4 as compared to pH 1.2. Increased incorporation of hydrogel contents led to an increase in porosity, drug loading, and gel fraction while a reduction in sol fraction was seen. The polymer volume fraction was found to be low at pH 7.4 compared to pH 1.2, indicating a prominent and greater swelling of the prepared hydrogels at pH 7.4. Likewise, a biodegradation study revealed a slow degradation rate of the developed hydrogel. Hence, we can conclude from the results that a fabricated system of hydrogel could be used as a suitable carrier for the controlled delivery of ketorolac tromethamine.

Application of Ethyl Cellulose and Ethyl Cellulose + Polyethylene Glycol for the Development of Polymer-Based Formulations using Spray-Drying Technology for Retinoic Acid Encapsulation

Ethyl cellulose (EC)-based microparticles, with and without the incorporation of polyethylene glycol (PEG) as a second encapsulating agent, were prepared using the spray-drying process for the encapsulation of retinoic acid (RA). The production of a suitable controlled delivery system for this retinoid will promote its antitumor efficiency against acute promyelocytic leukemia (APL) due to the possibility of increasing the bioavailability of RA. Product yield ranged from 12 to 28% in all the microparticle formulations, including unloaded microparticles and RA-loaded microparticles. Microparticles with a mean diameter between 0.090 ± 0.002 and 0.54 ± 0.02 µm (number size distribution) and with an irregular form and rough surface were obtained. Furthermore, regarding RA-loaded microparticles, both polymer-based formulations exhibited an encapsulation efficiency of around 100%. A rapid and complete RA release was reached in 40 min from EC− and EC + PEG-based microparticles.

Synthesis, Characterization, In-Vitro and In-Vivo Evaluation of Ketorolac Tromethamine-Loaded Hydrogels of Glutamic Acid as Controlled Release Carrier

Glutamic acid-co-poly(acrylic acid) (GAcPAAc) hydrogels were prepared by the free radical polymerization technique using glutamic acid (GA) as a polymer, acrylic acid (AAc) as a monomer, ethylene glycol dimethylacrylate (EGDMA) as a cross-linker, and ammonium persulfate (APS) as an initiator. Increase in gel fraction was observed with the increasing concentration of glutamic acid, acrylic acid, and ethylene glycol dimethylacrylate. High percent porosity was indicated by developed hydrogels with the increase in the concentration of glutamic acid and acrylic acid, while a decrease was seen with the increasing concentration of EGDMA, respectively. Maximum swelling and drug release was exhibited at high pH 7.4 compared to low pH 1.2 by the newly synthesized hydrogels. Similarly, both swelling and drug release increased with the increasing concentration of glutamic acid and acrylic acid and decreased with the increase in ethylene glycol dimethylacrylate concentration. The drug release was considered as non-Fickian transport and partially controlled by viscoelastic relaxation of hydrogel. In-vivo study revealed that the AUC_0–∞ of fabricated hydrogels significantly increased compared to the drug solution and commercial product Keten. Hence, the results indicated that the developed hydrogels could be used as a suitable carrier for controlled drug delivery.

Formulation and In-Vitro Characterization of pH-Responsive Semi-Interpenetrating Polymer Network Hydrogels for Controlled Release of Ketorolac Tromethamine

Ketorolac tromethamine is a non-steroidal anti-inflammatory drug used in the management of severe pain. The half-life of Ketorolac tromethamine is within the range of 2.5–4 h. Hence, repeated doses of Ketorolac tromethamine are needed in a day to maintain the therapeutic level. However, taking several doses of Ketorolac tromethamine in a day generates certain complications, such as acute renal failure and gastrointestinal ulceration. Therefore, a polymeric-controlled drug delivery system is needed that could prolong the release of Ketorolac tromethamine. Therefore, in the current study, pH-responsive carbopol 934/sodium polystyrene sulfonate-co-poly(acrylic acid) (CP/SpScPAA) hydrogels were developed by the free radical polymerization technique for the controlled release of Ketorolac tromethamine. Monomer acrylic acid was crosslinked with the polymers carbopol 934 and sodium polystyrene sulfonate by the cross-linker N’,N’-methylene bisacrylamide. Various studies were conducted to evaluate and assess the various parameters of the fabricated hydrogels. The compatibility of the constituents used in the preparation of hydrogels was confirmed by FTIR analysis, whereas the thermal stability of the unreacted polymers and developed hydrogels was analyzed by TGA and DSC, respectively. A smooth and porous surface was indicated by SEM. The crystallinity of carbopol 934, sodium polystyrene sulfonate, and the prepared hydrogels was evaluated by PXRD, which revealed a reduction in the crystallinity of reactants for the developed hydrogels. The pH sensitivity of the polymeric hydrogel networks was confirmed by dynamic swelling and in vitro release studies with two different pH media i.e., pH 1.2 and 7.4, respectively. Maximum swelling was exhibited at pH 7.4 compared to pH 1.2 and, likewise, a greater percent drug release was perceived at pH 7.4. Conclusively, we can demonstrate that the developed pH-sensitive hydrogel network could be employed as a suitable carrier for the controlled delivery of Ketorolac tromethamine.

Preparation, Characterization, Swelling Potential, and In-Vitro Evaluation of Sodium Poly(Styrene Sulfonate)-Based Hydrogels for Controlled Delivery of Ketorolac Tromethamine

The objective of the current study work was to fabricate sodium poly(styrene sulfonate-co-poly acrylic acid) (SPSPAA) hydrogels by using a free radical co-polymerization method for controlled delivery of ketorolac tromethamine (KT). Polymer (sodium poly(styrene sulfonate) (SPS) polymerized with monomer acrylic acid (AA) in the presence of initiator ammonium peroxodisulfate (APS) and cross-linker N',N'-Methylene bisacrylamide (MBA). Different combinations of polymer, cross-linker and monomer, were employed for development of polymeric hydrogels. Various studies such as sol-gel, drug loading, dynamic swelling, and drug release studies were carried out to know the sol and gel portion of SPSPAA, swelling behavior of hydrogels at different pH media (1.2 and 7.4), quantification of drug loaded by fabricated hydrogels, and amount release of KT at pH 1.2 and 7.4. Higher dynamic swelling was found at pH 7.4 compared to pH 1.2, and as a result, greater percent release of drug was perceived at pH 7.4. Thermal stability, crystallinity, confirmation of functional groups and development of a new polymeric system, and surface morphology were evaluated via Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), Powder X-ray Diffraction (PXRD), Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM) respectively. The results showed that the present work could be used as a potential candidate for controlled delivery of KT.

Freeze-Drying of Pharmaceutical and Nutraceutical Nanoparticles: The Effects of Formulation and Technique Parameters on Nanoparticles Characteristics

Nanoparticles (NPs) are of the most interesting novel vehicles for effective drug delivery to humans. Freeze drying is known as an engaging process to improve the long lasting stability of NPs formulations. This study aims to elucidate the importance of various parameters involving in freeze-drying of the most common pharmaceutical/nutraceutical NPs including nanosuspensions, nanocrystals (NCs), cocrystals/nanococrystals, nanoemulsions (NEs), nanocapsules (NCPs) and nanospheres (NSPs). Regarding this, the therapeutic goals of NPs and specifications of drug must be considered. According to our survey, the most influential factors for achieving optimum results include type and concentration of cryoprotectant/lyoprotectant, stabilizer structure and concentration, the NPs concentration in solution, freezing, annealing, and drying rate, the interaction between protectants and stabilizer, solvent type and antisolvent to solvent ratio. The study shows that for each class of NPs, specific variables are of highest significance and should be optimized. For instance, about NCs, freezing rate and antisolvent/solvent ratio should be particularly considered and for emulsified NPs, the best results have been obtained by 5-20% of saccharides as cryoprotectants. These findings suggest that to obtain a product with the lowest aggregation and particle size (PS), optimization of the effective factors in formulation and lyophilization process are essential.