Biological support media influence the bacterial biofouling community in reverse osmosis water reclamation demonstration plants

Biofouling detection methods that are widely applicable and useful across disciplines: a mini-review

Biofouling, or the build-up of microorganisms in a biofilm at the solid-water or water-air interface, is an interdisciplinary problem. Biofouling causes various issues including clogging systems, contaminating devices, and creating infections that are extremely difficult to treat, to name but a few. Therefore, engineers, pharmacologists, microbiologists, wastewater treatment operators, chemists, food preservative formulators, home and personal care product formulators, and toxicologists all play a role in studying and have an interest in solving biofouling. High-throughput studies on biofilm prevention and removal can take the form of biofilm antimicrobial microdilution susceptibility (BAMS) tests. Due to vested interests of many disciplines, the results from these tests should be applicable and useful to each discipline. This critical review analyses the focuses, biological implications, and metrics required by each discipline. The possible detection methods that could satisfy each desired metric are then summarized. The detection methods were analysed in order to recommend two methods of biofilm detection, Crystal Violet stain and the LIVE/DEAD BacLight stain, which correspond with three metrics including total biomass, log reduction, and the MIC, BPC, MBIC, MBC, BBC, and/or MBEC values. Determining these three metrics for each BAMS test will allow this type of research to be widely applicable and useful across many disciplines.

Reducing the Impacts of Biofouling in RO Membrane Systems through In Situ Low Fluence Irradiation Employing UVC-LEDs

Biofouling is a major concern for numerous reverse osmosis membrane systems. UV pretreatment of the feed stream showed promising results but is still not an established technology as it does not maintain a residual effect. By conducting accelerated biofouling experiments in this study, it was investigated whether low fluence UV in situ treatment of the feed using UVC light-emitting diodes (UVC-LEDs) has a lasting effect on the biofilm. The application of UVC-LEDs for biofouling control is a novel hybrid technology that has not been investigated, yet. It could be shown that a low fluence of 2 mJ∙cm^-2 delays biofilm formation by more than 15% in lab-scale experiments. In addition, biofilms at the same feed channel pressure drop exhibited a more than 40% reduced hydraulic resistance. The delay is probably linked to the inactivation of cells in the feed stream, modified adsorption properties or an induced cell cycle arrest. The altered hydraulic resistance might be caused by a change in the microbial community, as well as reduced adenosine triphosphate levels per cells, possibly impacting quorum sensing and extracellular polymeric substances production. Due to the observed biofilm attributes, low fluence UV-LED in situ treatment of the feed stream seems to be a promising technology for biofouling control.

The Best-Practice Organism for Single-Species Studies of Antimicrobial Efficacy against Biofilms Is Pseudomonas aeruginosa

As potable water scarcity increases across the globe; it is imperative to identify energy and cost-effective processes for producing drinking-water from non-traditional sources. One established method is desalination of brackish and seawater via reverse osmosis (RO). However, the buildup of microorganisms at the water-membrane interface, known as biofouling, clogs RO membranes over time, increasing energy requirements and cost. To investigate biofouling mitigation methods, studies tend to focus on single-species biofilms; choice of organism is crucial to producing useful results. To determine a best-practice organism for studying antimicrobial treatment of biofilms, with specific interest in biofouling of RO membranes, we answered the following two questions, each via its own semi-systematic review: 1. Which organisms are commonly used to test antimicrobial efficacy against biofilms on RO membranes? 2. Which organisms are commonly identified via genetic analysis in biofilms on RO membranes? We then critically review the results of two semi-systematic reviews to identify pioneer organisms from the listed species. We focus on pioneer organisms because they initiate biofilm formation, therefore, inhibiting these organisms specifically may limit biofilm formation in the first place. Based on the analysis of the results, we recommend utilizing Pseudomonas aeruginosa for future single-species studies focused on biofilm treatment including, but not limited to, biofouling of RO membranes.

Biodiversity and ecology of microorganisms in high pressure membrane filtration systems

High-pressure membrane filtration (reverse osmosis and nanofiltration) is used to purify different water sources, including wastewater, surface water, groundwater and seawater. A major concern in membrane filtration is the accumulation and growth of micro-organisms and their secreted polymeric substances, leading to reduced membrane performance and membrane biofouling. The fundamental understanding of membrane biofouling is limited despite years of research, as the means of microbial interactions and response to the conditions on the membrane surface are complicated. Here, we discuss studies that investigated the microbial diversity of fouled high-pressure membranes. High-throughput amplicon sequencing of the 16S rRNA gene have shown that Burkholderiales, Pseudomonadales, Rhizobiales, Sphingomonadales and Xanthomonadales frequently obtain a high relative abundance on fouled membranes. The bacterial communities present in the diverse feed water types and in pre-treatment compartments are different from the communities on the membrane, because high-pressure membrane filtration provides a selective environment for certain bacterial groups. The biofilms that form within the pre-treatment compartments do not commonly serve as an inoculum for the subsequent high-pressure membranes. Besides bacteria also fungi are detected in the water treatment compartments. In contrast to bacteria, the fungal community does not change much throughout membrane cleaning. The stable fungal diversity indicates that they are more significant in membrane biofouling than previously thought. By reviewing the biodiversity and ecology of microbes in the whole high pressure membrane filtration water chain, we have been able to identify potentials to improve biofouling control. These include modulation of hydrodynamic conditions, nutrient limitation and the combination of cleaning agents to target the entire membrane microbiome.

Self-decontaminating photocatalytic zinc oxide nanorod coatings for prevention of marine microfouling: a mesocosm study

The antifouling (AF) properties of zinc oxide (ZnO) nanorod coated glass substrata were investigated in an out-door mesocosm experiment under natural sunlight (14:10 light: dark photoperiod) over a period of five days. The total bacterial density (a six-fold reduction) and viability (a three-fold reduction) was significantly reduced by nanocoatings in the presence of sunlight. In the absence of sunlight, coated and control substrata were colonized equally by bacteria. MiSeq Illumina sequencing of 16S rRNA genes revealed distinct bacterial communities on the nanocoated and control substrata in the presence and absence of light. Diatom communities also varied on nanocoated substrata in the presence and the absence of light. The observed AF activity of the ZnO nanocoatings is attributed to the formation of reactive oxygen species (ROS) through photocatalysis in the presence of sunlight. These nanocoatings are a significant step towards the production of an environmentally friendly AF coating that utilizes a sustainable supply of sunlight.

Surface modification of an organic hessian substrate leads to shifts in bacterial biofilm community composition and abundance

Antifouling strategies to limit biofilms on submerged surfaces in the marine environment are of particular interest due to the economic and environmental impacts in industries such as shipping and aquaculture. Here, we investigate the influence of chemically modified hessian bag surfaces on the bacterial abundance and community composition of biofilm formation using flow cytometry and 16S rRNA pyrosequencing. Hessian bags were coated with 5% and 10% Propyl(trimethoxy)silane (PTMS) and half of the bags had their lignin and hemicellulose removed via NaOH mercerisation. Significantly lower bacterial abundance was observed on mercerised bags treated with 5% PTMS (p<0.01). Significant shifts in bacterial taxa were also observed (p=0.0004), whereby unmercerised bags exhibited higher relative abundances of the anaerobic family Desulfovibrionaceae (4.5±1.7%), while mercerised bags displayed higher relative abundances of the aerobic family Phyllobacteriaceae (3.6±1.7%). This suggests that the mercerisation process may lower colonization rates and subsequently produce a thinner biofilm. This hypothesis is strengthened by the lower abundance of bacteria on mercerised bags, particularly on the 5% PTMS coating. Our results show that modifying a hessian surface via non-toxic coating and mercerisation reduces biofilm formation and also shifts the dominant taxa, increasing our understanding of antifouling strategies in the marine environment.