Mechanical and biological properties of photocurable oligolactide-HA composites investigated under accelerated degradation

Scaffold geometry and computational fluid dynamics simulation supporting osteogenic differentiation in dynamic culture

Geometry of porous scaffolds is critical to the success of cell adhesion, proliferation, and differentiation in bone tissue engineering. In this study, the effect of scaffold geometry on osteogenic differentiation of MC3T3-E1 pre-osteoblasts in a perfusion bioreactor was investigated. Three geometries of oligolactide-HA scaffolds, named Woodpile, LC-1000, and LC-1400, were fabricated with uniform pore size distribution and interconnectivity using stereolithography (SL) technique, and tested to evaluate for the most suitable scaffold geometry. Compressive tests revealed sufficiently high strength of all scaffolds to support new bone formation. The LC-1400 scaffold showed the highest cell proliferation in accordance with the highest level of osteoblast-specific gene expression after 21 days of dynamic culture in a perfusion bioreactor; however, it deposited less amount of calcium than the LC-1000 scaffold. Computational fluid dynamics (CFD) simulation was employed to predict and explain the effect of flow behavior on cell response under dynamic culture. The findings concluded that appropriate flow shear stress enhanced cell differentiation and mineralization in the scaffold, with the LC-1000 scaffold performing best due to its optimal balance between permeability and flow-induced shear stress.

Heat-curing polylactide for bone implants: Preparation and investigation on properties relevant to degradation

Several processes have been used to produce polylactide for bone replacement. The challenge remains, however, to produce these devices by a simpler and more economical process. In this study, a method of combining powder and liquid parts was introduced. Star-shaped polylactides with molecular weights ranging from 3 to 16 kg/mol were synthesized and blended with a linear polylactide (Mw = 188 kg/mol) using the technique of emulsion solvent evaporation. The blends in a form of spherical powder were characterized by scanning electron microscopy, gel permeation chromatography, and particle size analysis. The heat-curing polylactide was fabricated by mixing the powder with triethylene glycol dimethacrylate, molded, and then heated in a hot water bath to solidify. The effects of powder composition in terms of amount and molecular weight of the star-shaped polylactide on mechanical properties were investigated. The results showed an increase in flexural strength with increase in the amount of star-shaped polylactide. The powder comprised star-shaped polylactide having the molecular weight of 10,770 g/mol, not less than 80wt%, offered the fabricated heat-curing polylactide with high strength ranging from 95 to 100 MPa. This formulation was further incorporated with hydroxyapatite to improve biocompatibility and subjected to degradation at 37°C. Mechanical test and weight loss determination together with biological test were conducted at certain times during degradation of the materials. Both materials with and without hydroxyapatite showed mechanical stability upon degradation for at least 6 months, but the one with hydroxyapatite revealed significantly better bioactivity at the end of 1-year follow-up study, making it the most promising material for bone implants.

Gentamicin Released from Porous Scaffolds Fabricated by Stereolithography

Porous oligolactide-hydroxyapatite composite scaffolds were obtained by stereolithographic fabrication. Gentamicin was then coated on the scaffolds afterwards, to achieve antimicrobial delivery ability to treat bone infection. The scaffolds examined by stereomicroscope, SEM, and μCT-scan showed a well-ordered pore structure with uniform pore distribution and pore interconnectivity. The physical and mechanical properties of the scaffolds were investigated. It was shown that not only porosity but also scaffold structure played a critical role in governing the strength of scaffolds. A good scaffold design could create proper orientation of pores in a way to strengthen the scaffold structure. The drug delivery profile of the porous scaffolds was also analyzed using microbiological assay. The release rates of gentamicin from the scaffolds showed prolonged drug release at the levels higher than the minimum inhibitory concentrations for S. aureus and E. coli over a 2-week period. It indicated a potential of the scaffolds to serve as local antibiotic delivery to prevent bacterial infection.