Methylene blue removal by using pectin-based hydrogels extracted from dragon fruit peel waste using gamma and microwave radiation polymerization techniques

Eco-friendly natural rubber-based hydrogel loaded with nano-fertilizer as soil conditioner and improved plant growth

This study addresses the dual challenge of agricultural cost and waste management by harnessing agrarian waste to produce nano-fertilizers (NF) to enhance crop yield while mitigating environmental impacts. Recognizing the limitations of traditional hydrogels' non-biodegradability and their inability to sustain root zone moisture and nutrient levels, we developed an LNR/AAc/pectin hydrogel. This innovative hydrogel offers a viable solution that provides a consistent NF supply and improves water retention efficiently. Additionally, we utilized Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy-energy dispersive x-ray (SEM-EDX), and thermogravimetric analysis (TGA) to analyze the hydrogel's structure, stability, and form. Transmission electron microscopy (TEM) and X-ray fluorescence spectroscopy (XRF) were employed to ascertain the NF concentration. The optimization of the hydrogel's swelling and NF release was conducted through a 5-level, 2-factor Response Surface Methodology (RSM), focusing on the effects of the AAc: LNR ratio and pectin weight while maintaining constant concentrations of potassium persulfate (KPS) and MBA. Results revealed a high correlation between predicted and experimental values, with determination coefficients (R2) of 0.9982 for swelling and 0.9979 for NF release. Furthermore, the hydrogel exhibited a 96.30 % biodegradation rate after 120 days of soil burial. Our findings demonstrate the hydrogels' potential to significantly impact farming and gardening by ensuring a sustainable supply of nutrients to enhance soil moisture retention.

Efficient removal of cationic dyes using lemon peel-chitosan hydrogel composite: RSM-CCD optimization and adsorption studies

The most prominent and easily identifiable factor of water purity is its colour, which may be both physically undesirable, and act as an alert towards potential environmental contamination. The current study describes the optimum synthesis technique for Lemon Peel-Chitosan hydrogel using the Response Surface Methodology integrated Central composite Design (RSM-CCD). This adsorbent is both environmentally friendly and cost-effective. The hydrogel exhibited a maximal dye removal capacity of 24.984, 24.788, 24.862, 23.483, 24.409, and 24.726 mg g-1, for 10 mg L-1 aqueous medium of Safranin O, Methylene blue, Basic fuchsin, Toluidine blue, Brilliant green and Crystal violet, respectively. The adsorption kinetics and isotherm data suggest that the Pseudo second-order kinetic and Freundlich adsorption isotherm models precisely represent the respective behaviour of all the dyes. The thermodynamic viability of the process is determined by the values of ΔG, ΔH, and ΔS. The probable mechanism of adsorption was the electrostatic interaction between the dye molecules and the hydrogel. The regenerated hydrogel had removal efficiencies of over 80 % even after enduring six cycles. Hence, the exceptional recyclability and utility of the adsorbent show their sustainability for wastewater treatment in textile factories.

A state-of-the-art review on plant-derived cellulose-based green hydrogels and their multifunctional role in advanced biomedical applications

The most prevalent carbohydrate on Earth is cellulose, a polysaccharide composed of glucose units that may be found in diverse sources, such as cell walls of wood and plants and some bacterial and algal species. The inherent availability of this versatile material provides a natural pathway for exploring and identifying novel uses. This study comprehensively analyzes cellulose and its derivatives, exploring their structural and biochemical features and assessing their wide-ranging applications in tissue fabrication, surgical dressings, and pharmaceutical delivery systems. The use of diverse cellulose particles as fundamental components gives rise to materials with distinct microstructures and characteristics, fulfilling the requirements of various biological applications. Although cellulose boasts substantial potential across various sectors, its exploration has predominantly unfolded within industrial realms, leaving the biomedical domain somewhat overlooked in its initial stages. This investigation, therefore, endeavors to shed light on the contemporary strides made in synthesizing cellulose and its derivatives. These innovative techniques give rise to distinctive attributes, presenting a treasure trove of advantages for their compelling integration into the intricate tapestry of biomedical applications.

A Comprehensive Review of Polysaccharide-Based Hydrogels as Promising Biomaterials

Polysaccharides have emerged as a promising material for hydrogel preparation due to their biocompatibility, biodegradability, and low cost. This review focuses on polysaccharide-based hydrogels' synthesis, characterization, and applications. The various synthetic methods used to prepare polysaccharide-based hydrogels are discussed. The characterization techniques are also highlighted to evaluate the physical and chemical properties of polysaccharide-based hydrogels. Finally, the applications of SAPs in various fields are discussed, along with their potential benefits and limitations. Due to environmental concerns, this review shows a growing interest in developing bio-sourced hydrogels made from natural materials such as polysaccharides. SAPs have many beneficial properties, including good mechanical and morphological properties, thermal stability, biocompatibility, biodegradability, non-toxicity, abundance, economic viability, and good swelling ability. However, some challenges remain to be overcome, such as limiting the formulation complexity of some SAPs and establishing a general protocol for calculating their water absorption and retention capacity. Furthermore, the development of SAPs requires a multidisciplinary approach and research should focus on improving their synthesis, modification, and characterization as well as exploring their potential applications. Biocompatibility, biodegradation, and the regulatory approval pathway of SAPs should be carefully evaluated to ensure their safety and efficacy.

Versatile functionalization of pectic conjugate: From design to biomedical applications

Pectin exists extensively in nature and has attracted much attention in biological applications for its unique chemical and physical characteristics. Functionalized pectin, especially pectic conjugates, has given many possibilities for pectin to improve its properties and bioactivity as well as to deliver active molecules. To better exploit this strategy of pectic functionalization, this review presents in detail the structural modifications of pectin, different synthetic methods, and design strategies of pectic conjugates involving both traditional chemical and "green" approaches. Here, the research ideas and applications of pectic prodrugs as well as the development of preparation based on pectic conjugates are reviewed, with emphasis on crosslinking systems of functionalized pectin and nanosystems based on self-assembly techniques. We hope this review will provide comprehensive and valuable information for the functionalization and systematization of the pectic conjugate from synthesis to application.

Fabrication of Cellulose Nanocrystal (CNCs) Based Biosorbent From Oil Palm Trunks Through Acid Hydrolysis With Sonication Assisted and Adsorption Kinetic Study

Developing cellulose nanocrystal (CNCs) preparation techniques is a challenge confronted by many researchers. The advantages of property remain the reason for research to be developed. To deal with this issue, it is essential to conduct research related to process optimization, particularly in the hydrolysis process, which is the primary step in forming CNCs. In this study, the effect of sonication-assisted hydrolysis time was investigated. XRD characterization showed that the CNCs formed where the first group with specific peaks indicated. The crystallinity of CNCs decreased with increasing sonication duration, indicating that sonication-assisted hydrolysis was nonselective. The crystallinity of CNCs obtained for 15, 30, and 45 min was 61.6, 55.0, and 48.4 %, respectively. For sonication duration variations of 15, 30, and 45 min, the hydration diameter of CNCs was nearly identical at 42.35 ± 27.10, 42.99 ± 29.46, and 42.63 ± 29.49 nm, respectively. Similarly, the removal of methylene blue can be achieved using CNCs bio-adsorbent. The results of percent removal of methylene blue under sonication treatment of 15, 30, and 45 min of sonication were 73.34; 73.62; 72.86 %, respectively. The adsorption rate of CNCs follows the pseudo-second-order kinetic model, with the adsorption values under sonication treatment of 15, 30, and 45 min were 0.075 ± 0.008; 0.166 ± 0.013; 0.078 ± 0.005 g mg-1 min-1, respectively.

Valorization of fruit wastes for circular bioeconomy: Current advances, challenges, and opportunities

The demands for fruits and processed products have significantly increased following the surging human population growth and rising health awareness. However, an enormous amount of fruit waste is generated during their production life-cycle due to the inedible portion and perishable nature, which become a considerable burden to the environment. Embracing the concept of "circular economy", these fruit wastes represent sustainable and renewable resources and can be integrated into biorefinery platforms for valorization into a wide range of high-value products. To fully realize the potential of fruit waste in circular bioeconomy and provide insights on future commercial-scale applications, this review presented the recycling and utilization of fruit wastes in various applications, particularly focusing on pollutant bioremediation, renewable energy and biofuel production, biosynthesis of bioactive compounds and low-cost microbial growth media. Furthermore, the challenges of efficient valorization of fruit wastes were discussed and future prospects were proposed.

Utilization of shell-based agricultural waste adsorbents for removing dyes: A review

Dye existence in the water body adversely impacts the habitat and the quality of the aquatic system. Considering different physical and chemical methods, adsorption is a propitious substitute for extracting dyes from wastewater specifically due to its performance, high selectivity, less expense, clear operation, and existence in a broad area of experimental circumstances. These benefits are directly linked to the essence of the adsorbent strength used in dye adsorption. In keeping with the principles of green chemistry, the adsorbent materials' accessibility in large amounts that involves easy preparation should boost the effectiveness of the adsorption cycle. Agricultural waste shell-based adsorbent is a novel and better alternative for the expansive adsorbent. This article focuses on the use of a raw and activated adsorbent from agricultural waste shell-based material (on the mitigation of different types of synthetic as well as natural textile dye particles) to find out adsorption capacity based on its operational conditions like pH, dosage, primary concentration of dye, equilibrium time and temperature. Oil palm empty agricultural waste bunch fiber has a maximum adsorption capacity of 393.67 mg/g of Cibacron blue 3G-A dye and Almond shell activated carbon has a maximum adsorption ability of 833.33 mg/g of Methylene Blue dye. Adsorption removal capacity of various raw agricultural wastes and activated agricultural wastes is reviewed. Agricultural waste shell-based adsorbents are a low-cost adsorbent that is a safer alternative to traditional adsorbents.

Trends in "green" and novel methods of pectin modification - A review

Modification of hydrocolloids to alter their functional properties using chemical methods is well documented in the literature. There has been a recent trend of adopting eco-friendly and "green" methods for modification. Pectin, being a very important hydrocolloid finds its use in various food applications due to its gelling, emulsifying, and stabilizing properties. The adoption of various "green" methods can alter the properties of pectin and make it more suitable for incorporation in food products. The novel approaches such as microwave and pulsed electric field can also be utilized for solvent-free modification, making it desirable from the perspective of sustainability, as it reduces the consumption of organic chemicals. Pectic oligosaccharides (POSs) produced via novel approaches are being explored for their biological properties and incorporation in various functional foods. The review can help to set the perspective of potential scale-up and adoption by the food industry for modification of pectin.

Application of the Zimm-Bragg Model to the Removal of Azo Dyes with Pectin

In this work, the ability of pectin (Pec) to remove direct red 80 (DR80), Congo red (CR), methyl orange (MO), and methyl red (MR) was studied. The removal percentages under adequate pH and ionic strength conditions were as follows: DR80 (99.5%), CR (99.8%), MO (88.6%), and MR (68%), showing that this methodology is efficient to remove azo dyes. The proposed method included the addition of native Pec to the dye aqueous solution and the formation of a gel that occurred when a calcium salt solution was added. This gel retains the molecules adsorbed onto the molecular surface of Pec through hydrogen bonds and electrostatic and hydrophobic interactions. To our knowledge, it is the first time that the Zimm-Bragg model is used to describe the removal of azo dyes with native Pec. This model includes two parameters: $K_u$ (nucleation constant), which is related to the tendency exerted by a dye molecule attached to the Pec to bind to other molecules present in the aqueous phase, and $U$ (cooperativity parameter), which determines the aggregation capacity of the dye molecules already attached to the Pec. This model fits the experimental isotherms very well, suggesting that Pec binds single molecules and dye aggregates. The obtained results in the values of $K_u$ ranged from 922 mol/kg (MR) to 1,157,462 mol/kg (CR), and $U$ varied from 2.51 (MR) to 169.19 (MO). These results suggest that the use of Pec is a viable option to remove azo dyes from aqueous effluents and that the Zimm-Bragg model fits adequately the isotherms of dyes that have a high tendency to form aggregates.

Co-modification of lignocellulosic biomass by maleic anhydride and ferric hydroxide for the highly efficient biosorption of methylene blue

Ferric hydroxide and microwave-assisted solvent-free esterification was applied in the modification of SBP to synthesize an efficient cationic dye adsorbent.