Phosphorylated chitin from shrimp shell waste: A robust solution for cadmium remediation

In this work, chitin (CT) was isolated from shrimp shell waste (SSW) and was then phosphorylated using diammonium hydrogen phosphate (DAP) as a phosphorylating agent in the presence of urea. The prepared samples were characterized using Scanning Electron Microscopy (SEM) and EDX-element mapping, Fourier Transform Infrared Spectroscopy (ATR-FTIR), X-Ray Diffraction (XRD), Thermogravimetric Analysis (TGA/DTG), conductometric titration, Degree of Substitution (DS) and contact angle measurements. The results of characterization techniques reveal the successful extraction and phosphorylation of chitin. The charge content of the phosphorylated chitin (P-CT) was 1.510 mmol·kg-1, the degree of substitution of phosphorus groups grafted on the CT surface achieved the value of 0.33. The adsorption mechanisms appeared to involve electrostatic attachment, specific adsorption (CdO or hydroxyl binding), and ion exchange. Regarding the adsorption of Cd2+, the effect of the adsorbent mass, initial concentration of Cd2+, contact time, pH, and temperature were studied in batch experiments, and optimum values for each parameter were identified. The experimental results revealed that P-CT enhanced the Cd2+ removal capacity by 17.5 %. The kinetic analyses favored the pseudo-second-order model over the pseudo-first-order model for describing the adsorption process accurately. Langmuir model aptly represented the adsorption isotherms, suggesting unimolecular layer adsorption with a maximum capacity of 62.71 mg·g-1 under optimal conditions of 30 °C, 120 min, pH 8, and a P-CT dose of 3 g·L-1. Regeneration experiments evidenced that P-CT can be used for 6 cycles without significant removal capacity loss. Consequently, P-CT presents an efficient and cost-effective potential biosorbent for Cd2+ removal in wastewater treatment applications.

Eco-friendly synthesis of clay-chitosan composite for efficient removal of alizarin red S dye from wastewater: A comprehensive experimental and theoretical investigation

Alizarin Red S (ARS) is commonly utilized for dyeing in textile industry. The dye represents a refractory pollutant in the aquatic environment unless properly treated. To tackle this pollutant, the applicability of chitosan-clay composite (3C) for the ARS removal from textile wastewater was studied. Characterization studies were conducted on the synthesized adsorbent using Fourier transformation infrared (FT-IR), X-ray diffraction (XRD), and energy dispersive X-ray (EDX) techniques. Optimized parameters such as adsorbent's dosage, pH, reaction time, and initial concentrations were tested in a batch system. Additionally, density functional theory (DFT) was calculated to understand the adsorption mechanism and the role of benzene rings and oxygen atoms in the ARS as electron donors. At the same initial concentration of 30 mg/L and optimized conditions of 50 mg of dose, pH 2, and 10 min of reaction time, about 86% of ARS removal was achieved using the composite. The pseudo-second-order kinetic was applicable to model a reasonable fitness of the adsorption reaction, while the Temkin model was representative to simulate the reaction with a maximum adsorption capacity of 44.39 mg/g. This result was higher than magnetic chitosan (40.12 mg/g), or pure chitosan (42.48 mg/g). With ΔH = 27.22 kJ/mol and ΔG<0, the data implied the endothermic and spontaneous nature of the adsorption process. Overall, this implies that the clay-chitosan composite is promising to remove target dye from contaminated wastewater.

Process-structure-property relationships of cellulose nanocrystals derived from Juncus effusus stems on ҡ-carrageenan-based bio-nanocomposite films

This study investigates the potential of Juncus plant fibers as a renewable source for producing cellulose nanocrystals (CNs) to reinforce polymers. Cellulose microfibers (CMFs) were extracted with a 0.43 ± 0.2 μm diameter and 69 % crystallinity through alkaline and bleaching treatments, then subjected to sulfuric acid hydrolysis, yielding four CN types (CN10, CN15, CN20 and CN30) with distinct physico-chemical properties and aspect ratios (47, 55, 57, and 60). The study assessed the influence of cellulose nanocrystals (CNs), incorporated at different weight percentages (3 %, 5 %, and 8 %), on thermal, transparency, and mechanical properties in k-carrageenan (CA) biocomposite films. The results indicate significant enhancements in these characteristics, highlighting good compatibility between CNs and CA matrix. Particularly noteworthy is the observed substantial improvement in tensile strength at an 8 wt% loading, with values of 23.43 ± 0.83 MPa for neat CA, 33.53 ± 0.83 MPa for CA-CN10, 36.67 ± 0.71 MPa for CA-CN15, 37.65 ± 0.56 MPa for CA-CN20, and 39.89 ± 0.77 MPa for CA-CN30 composites. Furthermore, the research explores the connection between the duration of hydrolysis and the properties of cellulose nanocrystals (CNs), unveiling their influence on the characteristics of nanocomposite films. Prolonged hydrolysis enhances CN crystallinity (CrI), aspect ratio, and surface charge content, consequently enhancing mechanical features like strength and flexibility in these films. These findings demonstrate the potential of Juncus plant fibers as a natural and eco-friendly resource for producing CNs that effectively reinforce polymers, making them an attractive option for diverse applications in the field.

Preparation and characterization of sulfated nanocellulose: From hydrogels to highly transparent films

This study focuses on the production of sulfated cellulose microfibers and nanocellulose hydrogels from native cellulose microfibers (CMF). The process involves using a combination of H2SO4 and urea, resulting in highly sulfated cellulose microfiber hydrogel (SC) with notable properties such as a sulfur content of 7.5 %, a degree of sulfation of 0.49, a surface charge content of 2.2 mmol. g-1, and a high yield of 81 %. The SC hydrogel can be easily fibrillated into sulfated nanocellulose hydrogel (S-NC) with elongated nanocellulose structures having an average diameter of 6.85 ± 3.11 nm, as determined using atomic force microscopy (AFM). X-ray photoelectron spectroscopy (XPS) analysis confirms the presence of sulfate groups on the surface of the nanocellulose material. Transparent films with good mechanical properties can be produced from both cellulose microfiber and nanocellulose hydrogels. The sulfate functionality gives the hydrogel attractive rheological properties and makes S-NC re-dispersible in water, which can be beneficial for various applications. This study demonstrates the potential of this process to address previous challenges related to nanocellulose materials production.

Lignin-functionalized cobalt for catalytic reductive degradation of organic dyes in simple and hybrid binary systems

To fulfill the unprecedented valorization approaches for lignocellulose, this work focuses on the potential of lignin-derived catalytic systems for bio-remediation, which are natural materials perceived to address the increased demand for eco-conscious catalyzed processes. A useful lignin-functionalized cobalt (Lig-Co) catalyst has been prepared, well-characterized and deployed for the catalyzed reducing decomposition of stable harmful organic pollutants such as methylene blue (MB) and methyl orange (MO), in simple and binary systems. The multifunctional character of lignin and the presence of various active sites can promote effectively loaded metal nanoparticles (NPs). Considerably, optimizing detoxification tests showed that the uncatalyzed use of NaBH4 as a reductive agent led to an incomplete reduction of organic contaminants over a long period of up to 65 min. Interestingly, Lig-Co catalyst exhibited a high reduction rate and turnover frequency of up to 99.23% and 24.12 min-1 for MB, respectively, while they reached 99.25% and 26.21 min-1 for MO at normal temperature. Kinetically quick catalytic reaction was also demonstrated for the hybrid system, in which the rate constant k was 0.175 s-1 and 0.165 s-1 for MB and MO, respectively, within a distinctly low reaction time of around 120 s. The reproducibility of the Lig-Co catalyst induces a desirable capacity to reduce stable dyes present simultaneously in the binary system, with 6 successive catalytic runs and over 80% of activity retained. Such robust findings underline the considerable interest in developing future lignin-mediated catalytic transformations and upscaling biomass-derived products, to meet the growing demand for sustainable and eco-friendly alternatives in various industries.

Copper phosphorylated cellulose nanofibers mediated azide-alkyne cycloaddition click reaction in water

Heterogenous copper-catalyzed azide-alkyne cycloaddition reaction (CuAAC) was performed by using the phosphorylated carbohydrate-based cellulose nanofibers loaded with copper(II) ions. The copper-containing phosphorylated cellulose nanofibers (here after noted Cu(II)-PCNFs) were prepared in two different morphologies, namely the paper and foam ones and characterized by different techniques, including Scanning Electronic Microscopy (SEM), Energy Dispersive X-ray (EDX), Brauner-Emmett-Teller (BET), FT-IR spectroscopy (FTIR), Thermal Gravimetric Analysis (TGA), X-ray Photoelectron spectroscopy (XPS) and Atomic Force Microscopy (AFM). Cu(II)-PCNFs showed high activity in the CuAAC reaction when applied to the ligation of various organic azides and terminal alkynes without any reducing agent, resulting in the regioselective synthesis of 1,4-disubstituted-1,2,3-triazoles in water at room temperature. These nanofibers were recovered and reused with no significant loss of catalytic activity or selectivity. A carbohydrate-based bio-support cellulose as reliable heterogenous catalyst was efficiently developed in view of taking the click chemistry concept to sustainable chemistry.

Continuous treatment of highly concentrated tannery wastewater using novel porous composite beads: Central composite design optimization study

This present study depicts the successful employment of fixed-bed column for total chromium removal from tannery wastewater in dynamic mode using sodium alginate-powdered marble beads (SA-Marble) as adsorbent. The SA-Marble composite beads prepared were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS) and Brunauer, Emmett and Teller (BET) method. The adsorption process performance of this bio-sorbent was examined in batches and columns for real effluent (tannery wastewater). After 90 min, the total chromium removal efficiency could be kept above 90% in the batch experiment. The adsorption kinetics fit better with the pseudo-second-order model, indicating the chemisorption process and the adsorption capacity of about 67.74 mg g-1 at 293 K (C0 = 7100 mg L-1) was obtained. Additionally, dynamic experiments indicate that the total chromium removal efficiency could be maintained above 90% after 120 min at 293 K and 60 min at 318 and 333 K; it's an endothermic but rapid process. The effects of two adsorption variables (Temperature and time) were investigated using central composite design (CCD), which is a subset of response surface methodology (total Cr, COD, sulfate, and total phosphorus percentage removal). This work paves a new avenue for synthesizing SA-Marble composite beads and provides an adsorption efficiency of total chromium removal from tannery wastewater.

Graphical abstract

Hemp cellulose nanocrystals for functional chitosan/polyvinyl alcohol-based films for food packaging applications

Hemp is known for its swift growth and remarkable sustainability, requiring significantly less water, an adaptable cultivation to a wide range of climates when compared to other fibers sources, making it a practical and environmentally friendly choice for packaging materials. The current research seeks to extract cellulose nanocrystals (CNCs) from hemp fibers using alkali treatment followed by acid hydrolysis and assess their reinforcing capacity in polyvinyl alcohol (PVA) and chitosan (CS) films. AFM analysis confirmed the existence of elongated, uniquely nanosized CNC fibers. The length of the isolated CNCs was approximately 277.76 ± 61 nm, diameter was 6.38 ± 1.27 nm and its aspect ratio was 44.69 ± 11.08. The FTIR and SEM analysis indicated the successful removal of non-cellulosic compounds. Furthermore, the study explored the impact of adding CNCs at varying weight percentages (0, 0.5, 1, 2.5, and 5 wt%) as a strengthening agent on the chemical composition, structure, tensile characteristics, transparency, and water solubility of the bionanocomposite films. Adding CNCs to the CS/PVA film, up to 5 wt%, resulted in an improvement in both the Young's modulus and tensile strength of the bionanocomposite film, which are measured at (412.46 ± 10.49 MPa) and (18.60 ± 3.42 MPa), respectively, in contrast to the control films with values of (202.32 ± 22.50 MPa) and (13.72 ± 2.61 MPa), respectively. The scanning electron microscopy (SEM) images reveal the creation of a CS/PVA/CNC film that appears smooth, with no signs of clumping or clustering. The blending and introduction of CNCs have yielded transparent and biodegradable CS/PVA films. This incorporation has led to a reduction in the gas transmission rate (from 7.013 to 4.159 cm3 (m2 day·0.1 MPa))-1, a decrease in transparency (from 90.23% to 82.47%), and a lowered water solubility (from 48% to 33%). This study is the inaugural effort to propose the utilization of hemp-derived CNC as a strengthening component in the development of mechanically robust and transparent CS/PVA-CNC bio-nanocomposite films, holding substantial potential for application in the field of food packaging.

Bio-based functionalized adsorptive polymers for sustainable water decontamination: A systematic review of challenges and real-world implementation

The overwhelming concerns of water pollution, industrial discharges and environmental deterioration by various organic and inorganic substances, including dyes, heavy metals, pesticides, pharmaceuticals, and detergents, intrinsically drive the search for urgent and efficacious decontamination techniques. This review illustrates the various approaches to remediation, their fundamentals, characteristics and demerits. In this manner, the advantageous implementation of nature-based adsorbents has been outlined and discussed. Different types of lignocellulosic compounds (cellulose, lignin, chitin, chitosan, starch) have been introduced, and the most used biopolymeric materials in bioremediation have been highlighted; their merits, synthesis methods, properties and performances in aqueous medium decontamination have been described. The literature assessment reveals the genuine interest and dependence of academic and industrial fields to valorize biopolymers in the adsorption of various hazardous substances. Yet, the full potential of this approach is still confined by certain constraints, such as the lack of reliable, substantial, and efficient extraction of biopolymers, as well as their modest and inconsistent physicochemical properties. The futuristic reliance on such biomaterials in all fields, rather than adsorption, is inherently reliable on in-depth investigations and understanding of their features and mechanisms, which can guarantee a real-world application and green technologies.

A Comprehensive Review of Polysaccharide-Based Hydrogels as Promising Biomaterials

Polysaccharides have emerged as a promising material for hydrogel preparation due to their biocompatibility, biodegradability, and low cost. This review focuses on polysaccharide-based hydrogels' synthesis, characterization, and applications. The various synthetic methods used to prepare polysaccharide-based hydrogels are discussed. The characterization techniques are also highlighted to evaluate the physical and chemical properties of polysaccharide-based hydrogels. Finally, the applications of SAPs in various fields are discussed, along with their potential benefits and limitations. Due to environmental concerns, this review shows a growing interest in developing bio-sourced hydrogels made from natural materials such as polysaccharides. SAPs have many beneficial properties, including good mechanical and morphological properties, thermal stability, biocompatibility, biodegradability, non-toxicity, abundance, economic viability, and good swelling ability. However, some challenges remain to be overcome, such as limiting the formulation complexity of some SAPs and establishing a general protocol for calculating their water absorption and retention capacity. Furthermore, the development of SAPs requires a multidisciplinary approach and research should focus on improving their synthesis, modification, and characterization as well as exploring their potential applications. Biocompatibility, biodegradation, and the regulatory approval pathway of SAPs should be carefully evaluated to ensure their safety and efficacy.

Hybrid carbonaceous adsorbents based on clay and cellulose for cadmium recovery from aqueous solution

The current work describes the synthesis of carbonaceous composites via pyrolysis, based on CMF, extracted from Alfa fibers, and Moroccan clay ghassoul (Gh), for potential use in heavy metal removal from wastewater. Following synthesis, the carbonaceous ghassoul (ca-Gh) material was characterized using X-ray fluorescence (XRF), Scanning Electron Microscopy coupled with Energy Dispersive X-ray (SEM-EDX), zeta-potential and Brunauer-Emmett-Teller (BET). The material was then used as an adsorbent for the removal of cadmium (Cd²⁺) from aqueous solutions. Studies were conducted into the effect of adsorbent dosage, kinetic time, initial concentration of Cd²⁺, temperature and also pH effect. Thermodynamic and kinetic tests demonstrated that the adsorption equilibrium was attained within 60 min allowing the determination of the adsorption capacity of the studied materials. The investigation of the adsorption kinetics also reveals that all the data could be fit by the pseudo-second-order model. The Langmuir isotherm model might fully describe the adsorption isotherms. The experimental maximum adsorption capacity was found to be 20.6 mg g^-1 and 261.9 mg g^-1 for Gh and ca-Gh, respectively. The thermodynamic parameters show that the adsorption of Cd²⁺ onto the investigated material is spontaneous and endothermic.

Starch biocomposites based on cellulose microfibers and nanocrystals extracted from alfa fibers (Stipa tenacissima)

Cellulose-based biopolymers have emerged as one of the most promising components to produce sustainable composites as a potential substitutes to fossil-based materials. Herein, the aim of this study is to investigate the reinforcing effect of cellulose microfibers (CMFs) and cellulose nanocrystals (CNCs), extracted from alfa fibers (Stipa tenacissima), on the properties of starch biopolymer extracted from potato. The as-extracted CMFs (D = 5.94 ± 0.96 μm), CNCs (D = 14.29 ± 2.53 nm) and starch were firstly characterized in terms of their physicochemical properties. Afterwards, CMFs and CNCs were separately dispersed in starch at different concentrations, and their reinforcing effects as well as the chemical, thermal, transparency and mechanical properties of the resulted starch-based films were evaluated. Thus, CMFs and CNCs incorporation into starch resulted in a minor impact on the films thermal stability, while a considerable impact on the transparency property was observed. In terms of mechanical properties, the addition of up to 20 wt% CMFs reduced the film's elongation but drastically increased its stiffness by 300 %. On the other hand, in the case of CNCs, a loading of 10 wt% was found to be the most effective in increasing film stiffness (by 57 %), while increasing the loading up to 20 wt% CNCs enhanced the film's ductility (strain-to-failure) by 52 %. This study showed that introduction of cellulosic fibers having different sizes into starch can produce biocomposite materials with a wide range of properties for food packaging application.

A novel hydrogel beads based copper-doped Cerastoderma edule shells@Alginate biocomposite for highly fungicide sorption from aqueous medium

The engineering of a novel biocomposite based on Cerastoderma edule shells doped with copper and alginate (Ce-Cu@Alg) forming hydrogel beads was used for batch and dynamic adsorption thiabendazole (TBZ) pesticide from water. The prepared biosorbent was analyzed by various characterization techniques such as scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), Brunauer-Emmett-Teller analysis (BET), and energy dispersive spectroscopy (EDS), thermogravimetric and differential analysis (TGA-DTA). The results of the TBZ batch biosorption by Ce-Cu@Alg composite showed that the Langmuir model was the most adequate to describe the adsorption process, with a maximum adsorption capacity value of 21.98 mg/g. Moreover, the adsorption kinetics were adjusted by the pseudo-second-order model. The optimal conditions determined by the RSM approach coupled with the CCD design were 100 ppm of initial TBZ concentration, a Ce-Cu@Alg beads dose of 6 g/L and a contact time of 180 min for maximum removal of 83.42%. On the other hand, the TBZ sorption on a fixed bed of Ce-Cu@Alg beads was effective at high column height, low effluent flow and low solution concentration. The Thomas model was best fitted to the kinetic data. This study shows the possibility of using this new hybrid biocomposite in the industrial sector to treat large effluent volumes.

Methylcellulose/lignin biocomposite as an eco-friendly and multifunctional coating material for slow-release fertilizers: Effect on nutrients management and wheat growth

To obviate adverse effects from the non-biodegradability of certain polymer-based slow-release fertilizers (SRFs) and to offset higher operational costs, the use of biopolymers as coating material has recently caught interest in the research circles. The present work aims to design a sustainable coating material based on biodegradable polymers. To this end, Alfa plant was initially exploited as a viable sustainable source for the extraction of lignin (LGe), which was in turn integrated into the development of a three-dimensional cross-linked network, including methylcellulose (MC) as a matrix and citric acid (CA) as a cross-linking agent. Then, the designed coating material was applied onto Di-ammonium Phosphate (DAP) and Triple Superphosphate (TSP) water-soluble fertilizers in a rotating pan machine. Chemical, physical, and biodegradation studies have confirmed that the coating material is environmentally-friendly. Nutrients release experiments in water as well as in soil environments have proved the effectiveness of the MC and MC/LGe coating layers in delaying the nutrients discharge. Besides, the nutrients release from coated DAP and TSP lasted longer than 30 days. Furthermore, the coating film enhanced the fertilizers mechanical resistance and boosted the soil water retention capacity. The agronomic evaluation has also confirmed their remarkable potential in enhancing wheat leaf area, chlorophyll content and biomass, in addition to the roots architecture and the final fruiting efficiency. These results showed that this hybrid composite could be used as an efficient coating material to produce slow-release fertilizers with multifunctional performances.

Exploration of multifunctional properties of garlic skin derived cellulose nanocrystals and extracts incorporated chitosan biocomposite films for active packaging application

For many years, garlic has been used as a condiment in food and traditional medicine. However, the garlic skin, which accounts for 25% of the garlic bulk, is considered agricultural waste. In this study, cellulose nanocrystals (CNCs) and garlic extract (GE) from garlic skin were isolated and used as fillers to manufacture biocomposite films. The films were characterized in terms of UV barrier, thermal, mechanical, biodegradability, and antimicrobial activity. The chitosan-containing films and CNCs have significantly improved the films' tensile strength, Young's modulus, and elongation but decreased the film transparency compared to chitosan films. The combination of the CNCs and GE, on the other hand, slightly reduced the mechanical properties. The addition of CNCs slightly decreased the film transparency, while the addition of GE significantly improved the UV barrier properties. Thermal studies revealed that the incorporation of CNC and GE had minimal effect on the thermal stability of the chitosan films. The degradability rate of the chitosan composite films was found to be higher than that of the neat chitosan films. The antimicrobial properties of films were studied against Escherichia coli, Streptomyces griseorubens, Streptomyces alboviridis, and Staphylococcus aureus, observing that their growth was considerably inhibited by the addition of GE in composite films. Films incorporating both CNCs and GE from garlic skin hold more promise for active food packaging applications due to a combination of enhanced physical characteristics and antibacterial activity.

Manufacturing of macroporous cellulose monolith from green macroalgae and its application for wastewater treatment

Enormous interest in using marine biomass as a sustainable resource for water treatment has been manifested over the past few decades. Herein, the objective was to investigate the possible use of green macroalgae (Codium tomentosum) for cellulose-based foam production through a versatile and convenient process. Macroporous cellulose monolith was prepared from cellulose hydrogel using freeze-drying process, resulting in a mechanically rigid monolith with a high swelling ratio. The as-produced spongy-like porous cellulosic material was used as bio-sorbent for wastewater treatment, particularly for removing methylene blue (MB) dye from concentrated aqueous solution. The adsorption capacity of MB was subsequently studied, and the effect of adsorption process parameters was determined in a controlled batch system. From the kinetic studies, it was found that the adsorption equilibrium was reached within 660 min. Furthermore, the analysis of the adsorption kinetics reveals that the data could be fitted by a pseudo-second order model, while the adsorption isotherm could be described by Langmuir isotherm model. The maximum adsorption capacity was found to be 454 mg/g. The findings suggested that the produced cellulose monolith could be used as a sustainable adsorbent for water treatment.

Beneficiation of cactus fruit waste seeds for the production of cellulose nanostructures: Extraction and properties

Cactus fruit waste seeds (CWS) are a by-product of the cactus fruit processing industry. Until now, CWS are not recoverable in any sector. The valorization of these residues may reduce their volume in the environment and transform them into valuable products. In this work, CWS have been identified for the first time as a sustainable lignocellulosic source. Cellulose microfibers (CMFs) and nanocrystals (CNCs) were successfully produced via alkali and bleaching treatments followed by sulfuric acid hydrolysis. It was found that the extracted CMFs showed an average diameter of 11 μm, crystallinity of 72%, and a yield of 25%. The as-produced CNCs exhibited a needle-like shape with a diameter of 13 ± 3 nm and length of 419 ± 48 nm, giving rise to an aspect ratio of 30.7, with a zeta potential value of - 30 mV and a charge content of sulfate groups of 287.8 mmol·kg^-1. Herein, the obtained cellulosic derivatives with excellent properties from this underutilized waste can draw the attention of researchers towards CWS as a new type of biomass with virtually no hemicellulose, which could be of great interest to isolate and study the effects of how lignin interacts with cellulose.

Crosslinked starch-coated cellulosic papers as alternative food-packaging materials

In general, during the production of cellulosic materials for food-packaging applications, lignin and other amorphous components are usually removed via the pulping and multilevel bleaching process to entirely separate them from the fiber.

Artemisia annua Stems a New Sustainable Source for Cellulosic Materials: Production and Characterization of Cellulose Microfibers and Nanocrystals

In this study, Artemisia annua stem waste was identified, for the first time, as a potential natural source to produce cellulose microfibers (CMF), as well as cellulose nanocrystals (CNC) with unique functionalities by using various organic acids. The CMF extraction was carried out using alkali and bleaching treatments, while the CNC were isolated under acid hydrolysis by using sulfuric acid (S-CNC), phosphoric acid (P-CNC), and hydrochloric acid / citric acid mixture (C-CNC). The CMF and CNC physicochemical, structural, morphological, dimensional, and thermal properties were characterized. CMF with a yield of 53%, diameter of 5 to 30 µm and crystallinity of 57% were successfully obtained. In contrast, CNC showed a rod-like shape with an aspect ratio of 53, 95, and 64 and a crystallinity index of 84, 79, and 72% for S-CNC, P-CNC, and C-CNC, respectively. Results suggested that the type of acid significantly influenced the structure, morphology, and thermal stability of CNCs. Based on these results, Artemisia annua stem waste is a great candidate source for cellulose derivatives with excellent characteristics.

Phosphorylated cellulose paper as highly efficient adsorbent for cadmium heavy metal ion removal in aqueous solutions

In search for more effective and eco-friendly adsorbent materials, this study comprehensively investigated Cd²⁺ adsorption onto phosphorylated cellulose paper (PCP). For this, cellulose microfibers (CMF) was extracted from Alfa fibers and phosphorylated using the solid-state phosphorylation approach. Then, the prepared PCP samples were characterized by SEM, EDX, XRD, FTIR, TGA, conductometric titration and zeta potential measurement. The adsorption of cadmium ions, the effect of time, pH and Cd²⁺ initial concentration were systematically studied in batch experiments. Based on the results, the highest adsorption capacity achieved was 479 mg of Cd²⁺ per g of PCP, which was remarkable compared to other modified cellulose capacities cited in the literature. Furthermore, the Cd²⁺ removal mechanism was investigated based on characterization results before and after adsorption and also based on the kinetics results. It was concluded that cation exchange and electrostatic attraction between phosphorylated cellulose and the cadmium ion mainly dominated the adsorption process. These findings highlighted that the phosphorylated cellulose paper has a broad application prospect in removal of divalent metal from aquatic solution.

In search for more effective and eco-friendly adsorbent materials, this study comprehensively investigated Cd²⁺ adsorption onto phosphorylated cellulose paper (PCP).

Cellulose nanocrystals-filled poly (vinyl alcohol) nanocomposites as waterborne coating materials of NPK fertilizer with slow release and water retention properties

Effective fertilizers management is essential for sustainable agricultural practices. One way to improve agronomic practices is by using slow-release fertilizers (SRF) that have shown interesting role in optimizing nutrients availability for plants growth. Considering the current ecological concerns, coated SRF using ecofriendly materials continue to attract great attention. In this context, novel waterborne and biodegradable coating nanocomposite formulations were elaborated from cellulose nanocrystals (CNC)-filled poly (vinyl alcohol) (PVA) for slow release NPK fertilizer with water retention property. CNC were extracted from hemp stalks using sulfuric acid hydrolysis process and their physico-chemical characteristics were investigated. CNC with various weight loadings (6, 10, 14.5 wt%) were incorporated into PVA polymer via solvent mixing method to produce viscous coating nanocomposite formulations with moderated shear viscosity. Uniform PVA@CNC coating microlayer was applied on the surface of NPK fertilizer granules in Wurster chamber of a fluidized bed dryer at controlled spraying and drying parameters. The nitrogen, phosphorus and potassium release profiles from coated NPK fertilizer were determined in water and soil. It was found that the coating materials extended the N-P-K nutrients release time from 3 days for uncoated fertilizer to 10 and 30 days for neat PVA- and CNC/PVA-coated fertilizer in soil medium, indicating the positive role of the presence of CNC in the PVA-based coatings. The morphology, coating rate and crushing strength of the as-prepared coated products were investigated in addition to their effect on water holding capacity and water retention of the soil. Enhanced crushing strength and water retention with a positive effect on the soil moisture were observed after coating NPK fertilizer, mainly with high CNC content (14.5 wt%). Therefore, these proposed nanocomposite coating materials showed a great potential for producing a new class of SRF with high nutrients use efficiency and water retention capacity, which could be beneficial to sustainable crop production.

Performance and dynamic modeling of a continuously operated pomace olive packed bed for olive mill wastewater treatment and phenol recovery

The solid waste of olive oil extraction processes (olive pomace, OP) was converted into activated carbon (AC) by treating it with NaOH and then encapsulating it within sodium alginate (SA) in beads by crosslinking (SA-AC beads). The prepared SA-AC beads were utilized as an adsorbent for the elimination and recovery of phenolic compounds (PCs) from olive mill wastewater (OMWW) following a zero liquid and waste discharge approach to implement and promote the circular economy concept. The novel AC and SA-AC beads were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR) and Brunauer, Emmett and Teller (BET) analysis. The adsorption performance of these beads was evaluated in batch and fixed-bed reactors operated in a concurrent flow system. The results revealed that an adsorption capacity of 68 mg g^-1 was attained for 4000 mg L^-1 phenolic compounds. The kinetics of the adsorption process of the PCs fit a pseudo second-order model, and the most likely mechanism took place in two stages. The adsorption isotherm conformed to the Langmuir model, representing the monolayer adsorption of the phenolic compounds. The dynamic models were used, and they accurately represented the breakthrough curves. Considering PC recovery and process reusability, a regeneration experiment of SA-AC beads was carried out in fixed-bed reactors. SA-AC beads showed a high percentage desorption >40% using ethanol and were efficient after several cycles of OMWW treatment and phenol recovery.

Stipa tenacissima L.: A New Promising Source of Bioactive Compounds with Antioxidant and Anticancer Potentials

Background: Stipa tenacissima L. (S. tenacissima), called Esparto grass, is a cultivated species used for industrial purposes, including textile production. This species has never been studied for its medical potential before, nor has it been used in traditional medicines. It is thus fitting that the present study aimed to investigate the pharmacological potential of S. tenacissima. To achieve this goal, this work was conducted to study the chemical composition, antioxidant properties, and antiproliferative effects of S. tenacissima against cancerous cell lines, including the human colorectal adenocarcinoma cell line (HT-29) and human breast adenocarcinoma cell line (MDA-MB-231). Fractionation and characterization of S. tenacissima extract showed the presence of promising bioactive fractions. The fractions obtained from S. tenacissima extract exhibited interesting antioxidant properties, with IC₅₀ values ranging from 1.26 to 1.85 mg/mL. All fractions, such as F1, F2, F3, and F4, induced an important antiproliferative effect on the cancer cell lines MDA-MB-231, scoring IC₅₀ values ranging from 63.58 ± 3.14 to 99.880 ± 0.061 µg/mL. These fractions (F1, F2, F3, and F4) also exhibited a potent antiproliferative effect versus HT-29 cell lines, with IC₅₀ values ranging from 71.50 ± 4.97 to 87.500 ± 1.799 µg/mL. Therefore, S. tenacissima could constitute a new natural source of bioactive compounds that can be used for therapeutic purposes to fight cancer and free radical damage.

A highly efficient chemical approach to producing green phosphorylated cellulosic macromolecules

The introduction of phosphate groups into cellulosic fibers allows for the tuning of their fire resistance, chelating and metal-adhesion properties, enabling the development of flame-retardant adhesive and adsorbent materials. Toward that end, the major challenge is developing a novel efficient and environmentally friendly phosphorylation route that offers an alternative to existing methods, which can achieve the targeted properties. For this purpose, cellulosic fibers were chemically modified herein using solid-state phosphorylation with phosphoric acid and urea without causing substantial damage to the fibers. The morphological, physicochemical, structural and thermal characterisations were examined using FQA, SEM, EDX, FTIR, ¹³C/³¹P NMR, conductometric titration, zeta potential measurement and thermogravimetric analysis. All the characterisations converge towards a crosslinked polyanion structure, with about 20 wt% grafted phosphates, a nitrogen content of about 5 wt% and a very high charge density of 6608 mmol kg⁻¹. Phosphate groups are linked to cellulose through a P–O–C bond in the form of orthophosphate and pyrophosphates. Furthermore, thermal properties of the phosphorylated cellulosic fibers were investigated and a new degradation mechanism was proposed.

The introduction of phosphate groups into cellulosic fibers allows for the tuning of their fire resistance, chelating and metal-adhesion properties, enabling the development of flame-retardant adhesive and adsorbent materials.

Micro- and nano-structures of cellulose from eggplant plant (Solanum melongena L) agricultural residue

Currently, agriculture sector produces enormous quantity of residues, creating severe environmental problems. These agricultural residues are rich in lignocellulosic fibers, making them sustainable sources to produce high added-value materials. This investigation aims to transform the eggplant plant residue (EPR) into purified cellulose microfibers (CMF) and cellulose nanocrystals (CNC). CMF with a yield of 54 %, diameter of 13.6 μm and crystallinity of 71 % were successfully obtained from raw EPR using alkali and bleaching treatments. By subjecting CMF to phosphoric and sulfuric acid hydrolysis, phosphorylated (P-CNC) and sulfated (S-CNC) were produced. P-CNC and S-CNC exhibited an aspect ratio of 89.4 and 74.2, zeta potential value of - 39.4 and - 28.7 mV, surface charge density of 116.7 and 218.2 mmol/kg cellulose and a crystallinity of 73 % and 80 %, respectively. Herein, the obtained cellulosic structures with excellent properties could be used in various applications, such as bio-derived fillers for polymer composites development.

Chitosan-Functionalized Graphene Nanocomposite Films: Interfacial Interplay and Biological Activity

Graphene oxide (GO) has recently captured tremendous attention, but only few functionalized graphene derivatives were used as fillers, and insightful studies dealing with the thermal, mechanical, and biological effects of graphene surface functionalization are currently missing in the literature. Herein, reduced graphene oxide (rGO), phosphorylated graphene oxide (PGO), and trimethylsilylated graphene oxide (SiMe3GO) were prepared by the post-modification of GO. The electrostatic interactions of these fillers with chitosan afforded colloidal solutions that provide, after water evaporation, transparent and flexible chitosan-modified graphene films. All reinforced chitosan-graphene films displayed improved mechanical, thermal, and antibacterial (S. aureus, E. coli) properties compared to native chitosan films. Hemolysis, intracellular catalase activity, and hemoglobin oxidation were also observed for these materials. This study shows that graphene functionalization provides a handle for tuning the properties of graphene-reinforced nanocomposite films and customizing their functionalities.

Composites with alginate beads: A novel design of nano-adsorbents impregnation for large-scale continuous flow wastewater treatment pilots

The sorption capacity of cadmium (Cd (II)) on three new generated nanocomposite beads sodium alginate (SA) based; SA-Clay (SA-C) beads, SA-Phosphate (SA-P) beads, and SA- Activated Charcoal (SA-Ch) beads was investigated in a batch scale, then a continuous flow reactor.

The highest adsorption capacity (137 mg/g) was obtained for SA-Ch using 1000 mg/L of initial Cd (II). The isotherm results showed that the adsorption equilibrium is compatible with the Langmuir isotherm and the sorption capacity of SA-Nano-adsorbent beads is very high. The models used for representing kinetic data was given that the removal of Cd (II) be well-fitted by second-order reaction kinetics. For the fixed bed column treatment, the maximum breakthrough times were 30, 38, and 48  h respectively for the SA-C, SA-P, and SA-Ch.

According to the obtained results, it was concluded that SA-Nano-adsorbent bead is an excellent designed material as a nanocomposite for cadmium elimination from wastewater in a continuous treatment process.

Smart designing of new hybrid materials based on brushite-alginate and monetite-alginate microspheres: bio-inspired for sequential nucleation and growth

In this report new hybrid materials based on brushite-alginate and monetite-alginate were prepared by self-assembling alginate chains and phosphate source ions via a gelation process with calcium ions. The alginate served as nanoreactor for nucleation and growth of brushite or/and monetite due to its gelling and swelling properties. The alginate gel framework, the crystalline phase and morphology of formed hybrid biomaterials were shown to be strongly dependent upon the concentration of the phosphate precursors. These materials were characterized by thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive x-ray analysis (EDX).