Solid leather wastes as adsorbents for cationic and anionic dye removal

Adsorptive Elimination of a Cationic Dye and a Hg (II)-Containing Antiseptic from Simulated Wastewater Using a Metal Organic Framework

Several types of pollutants have acute adverse effects on living bodies, and the effective removal of these pollutants remains a challenge. Safranin O (a biological dye) and merbromin (a topical mercury-containing antiseptic) are considered organic pollutants, and there are only a few reports on their removal. Synthesized and well-characterized (through PXRD, FTIR, FESEM, and EDS analysis) MOF-5 was used for the first time in the removal of safranin O and merbromin from simulated wastewater and real wastewater. In both cases, MOF-5 effectively removed contaminants. We found that in simulated wastewater, the highest efficiency of removal of safranin O was 53.27% (for 15 mg/L) at pH 10, and for merbromin, it was 41.49% (for 25 mg/L) at pH 6. In the case of real wastewater containing natural ions (Na+, K+, F-, Cl-, SO42-, PO43-, Mg2+, and Ca2+) and other molecules, the removal efficiencies of these two dyes decreased (34.00% and 26.28% for safranin O and merbromin, respectively) because of the presence of other ions and molecules. A plausible mechanism for the removal of these pollutants using MOF-5 was proposed.

Polymeric Networks Derived from UV-Curing of Bio-Based Polyesters for Methyl Violet Removal

In this study, firstly, the syntheses and characterizations of biobased polyesters with different acid values obtained from the condensation reaction of biobased itaconic acid and polyethylene glycol were investigated. Then, UV curing was applied to form polymeric networks as adsorbent material from these polyesters containing different acids. Fourier transform infrared spectrometry (FTIR), Nuclear Magnetic Resonance Spectroscopy (NMR), X-ray Photoelectron Spectroscopy (XPS), Gel Permeation Chromatography (GPC) and scanning electron microscope (SEM) were used for the characterization of polymeric networks. The effects of the parameters of contact time, initial dye concentration, pH, temperature, amount of adsorbent on adsorption were investigated by batch method. In addition, adsorption equilibrium data were analyzed by Langmuir, Freundlich, Tempkin, Elovich, Redlich-Peterson, Harkin-Jura and Jossens adsorption models. Kinetic and thermodynamic studies were performed at 298, 308, 318 and 328 K and desorption studies were also examined. Comparison studies for the effects of the acid values of the adsorbent materials on the removal of methyl violet (MV) organic pollutant from aqueous solutions were analyzed. According to the pseudo-second-order model, the adsorption capacities were found to be ≥ 357.14 mg/g for the adsorbents. From the thermodynamic data, it was determined that the mechanism was exothermic and spontaneous. As a result of the third reuse, it was found that the adsorbents had a removal efficiency of ≥ 72.36%. According to the results observed the increase in the acidities in the chemical structure of bio-based polymeric networks enhances the adsoption properties.

Carbonized Leather Waste: A Review and Conductivity Outlook

The carbonization of collagen-based leather waste to nitrogen-containing carbon is reviewed with respect to the preparation, characterization of carbonized products, and applications proposed in the literature. The resulting nitrogen-containing carbons with fibrous morphology have been used as adsorbents in water pollution treatment, in electrocatalysis, and especially in electrodes of energy-storage devices, such as supercapacitors and batteries. Although electrical conductivity has been implicitly exploited in many cases, the quantitative determination of this parameter has been addressed in the literature only marginally. In this report, attention has been newly paid to the determination of conductivity and its dependence on carbonization temperature. The resulting powders cannot be compressed into pellets for routine conductivity determination. A new method has been used to follow the resistivity of powders as a function of pressure up to 10 MPa. The conductivity at this pressure increased from 9.4 × 10^-8 S cm^-1 for carbonization at 500 °C to 5.3 S cm^-1 at 1000 °C. The conductivity of the last sample was comparable with conducting polymers such as polypyrrole. The carbonized leather thus has the potential to be used in applications requiring electrical conduction.

Production of Agglomerates, Composite Materials, and Seed Coatings from Tannery Waste as New Methods for Its Management

This paper presents methods for managing waste produced by the leather industry, including tanning shavings derived from chrome tanning technologies and collagen preparations. Shavings were classified according to their shape (in accordance with Zingg's shape classification). The content of individual elements was determined, together with the content of volatile organic compounds. Two new products were developed as part of the completed works: agglomerates (methods of non-pressure granulation) and composite materials were produced on the basis of tanning shavings and mineral fillers. Young's modulus values classify these composite materials in the group of polymers and certain materials from the group of elastomers. A method for seed coating (on the example of legumes and rape) was also developed using a disc granulator, including collagen preparations in one of the layers as a solution for preventing the effects of droughts (biostimulant). The analyses of selected properties of the new products confirm the wide possible application of waste shavings and collagen preparations in a circular economy, especially in the construction, packaging, and agricultural sectors.