The effects of gastrocnemius–soleus muscle forces on ankle biomechanics during triple arthrodesis

Comparison of different internal fixation models in ankle arthrodesis using 3D finite-element analysis

BACKGROUND

The purpose of this study is to use three-dimensional finite-element analysis to better understand the biomechanical features of various internal fixators for ankle arthrodesis.

METHODS

We used finite-element analysis to compare four different types of internal fixations in ankle arthrodesis: Group A had three crossed screws (Ø6.5 mm); Group B had two crossed screws (Ø6.5 mm) and an anterior plate (Ø2.7 mm); Group C only had an anterior anatomical plate (Ø3.5 mm); Group D had one anterior anatomical plate (Ø3.5 mm) and one posterior-lateral screw (Ø6.5 mm). We adopted Ansys 21.0 software to analyze and compare the four types in terms of the displacement of the arthrodesis surface and the stress peak and stress distribution of these models under intorsion, extorsion, dorsiflexion torque, and neutral vertical load.

RESULTS

① Displacement of the arthrodesis surface: In Group A, the maximum displacement was larger than Group D under neutral vertical load and dorsiflexion torque but less than it under intorsion and extorsion torque. In Group B, the maximum displacement against dorsiflexion, neutral vertical load, intorsion, and extorsion was less than that in the other three fixation models. In Group C, the maximum displacement against the above four loading patterns were significantly higher than that in another three fixation models. ② Stress peak and stress distribution: based on the stress distribution of the four models, the peak von Mises stress was concentrated in the central sections of the compression screws, plate joints, and bending parts of the plates.

CONCLUSIONS

The fixation model consisting of two crossed screws and an anterior outperformed the other three fixation models in terms of biomedical advantages; thus, this model can be deemed a safe and reliable internal fixation approach for ankle arthrodesis.

Dynamics analysis of the anterior cruciate ligament reconstruction surgery based on magnetic resonance imaging

In clinical practice, anterior cruciate ligament (ACL) rupture is always repaired by the single-beam reconstruction method. Before the surgery, the surgeon made the diagnosis based on medical images, such as CT (computerized tomography) and MR (magnetic resonance) images. However, little is known about how biomechanics governs the biological nature for femoral tunnel position. In the present study, three volunteers' motion trails were captured by six cameras when they were doing squat movement. The medical image can reconstruct the structure of the ligaments and bones and a left knee model was reconstructed by MIMICS by MRI data of DICOM format. Finally, the effects of different femoral tunnel positions on ACL biomechanics were characterized by the inverse dynamic analysis method. The results showed that there were significant differences in the direct mechanical effects of the anterior cruciate ligament at different locations of the femoral tunnel (p < 0.05), the peak stress of ACL in the low tension area was 1097.24 ± 25.55 N, and the peak stress of ACL in the distal femur was 356.81 ± 15.39 N, both of which were much higher than that in the direct fiber area (118.78 ± 20.68 N).

Biomechanical application of finite elements in the orthopedics of stiff clubfoot

BACKGROUND

The purpose of this study was to evaluate the effect of varying the different correction angles of hindfoot osteotomy orthosis on the biomechanical changes of the adjacent joints after triple arthrodesis in adult patients with stiff clubfoot to determine the optimal hindfoot correction angle and provide a biomechanical basis for the correction of hindfoot deformity in patients with stiff clubfoot.

METHODS

A 26-year-old male patient with a stiff left clubfoot was selected for the study, and his ankle and foot were scanned using dual-source computed tomography. A three-dimensional finite element model of the ankle was established, and after the validity of the model was verified by plantar pressure experiments, triple arthrodesis was simulated to analyze the biomechanical changes of the adjacent joints under the same load with "3°" of posterior varus, "0°" of a neutral position and "3°, 6°, 9°" of valgus as the correction angles.

RESULTS

The peak plantar pressure calculated by the finite element model of the clubfoot was in good agreement with the actual plantar pressure measurements, with an error of less than 1%. In triple arthrodesis, the peak von Mises stress in the adjacent articular cartilage was significantly different and less than the preoperative stress when the corrected angle of the hindfoot was valgus "6°". In comparison, the peak von Mises stress in the adjacent articular cartilage was not significantly different in varus "3°", neutral "0°", valgus "3°" and valgus "9°" compared with the preoperative stress.

CONCLUSION

The results of this study showed that different angles of hindfoot correction in triple arthrodesis did not increase the peak von Mises stress in the adjacent joints, which may not lead to the development of arthritis in the adjacent joint, and a hindfoot correction angle of "6°" of valgus significantly reduced the peak von Mises stress in the adjacent joints after triple arthrodesis.

Total ankle replacement along with subtalar joint arthrodesis: In-vitro and in-silico biomechanical investigations

Total ankle replacement (TAR) and subtalar joint (STJ) fusion, are popular treatments for ankle osteoarthritis (OA). Short endurance limits the former, and movement disability comes with the latter. It is hypothesized here that fusion of the STJ can improve the longevity of the TAR prosthesis. In this study, a fresh human cadaver's ankle joint underwent TAR surgery, and strain patterns in the vicinity of prosthesis were recorded after the application of axial compressive load on tibia, resembling stance phase of the gait. Then, STJ of the same sample fused (FTAR), and a similar test procedure was pursued. The obtained strains in the FTAR were smaller than those of the TAR (p < .01). Finite element models of the tested samples were also made, and validated by experimental strains. The validated FE models were then employed to find stress distribution on the tibial plateau and prosthesis compartments. FTAR demonstrated more regular stress profiles in bone-prosthesis interface. Also, maximum von Mises stress in the talar component of the FTAR is approximately half of that in the TAR (8 and 15 MPa, respectively). Based on the results of this study, having a more symmetric load distribution on the prosthesis after STJ fusion, longevity of the TAR may likely increase.