Analytical Procedures for PAH and PCB Determination in Water Samples—Error Sources

Efficiency comparison of extraction methods for the determination of 11 of the 16 USEPA priority polycyclic aromatic hydrocarbons in water matrices: Sources of origin and ecological risk assessment

As a result of their toxicity, ease of analysis, and environmental occurrence, 16 polycyclic aromatic hydrocarbons (PAHs) were chosen as priority pollutants by the USEPA. Few studies have been conducted to assess the levels of PAHs in South Africa, especially KwaZulu Natal province, and no work has been done in the selected study area. Therefore, this study aimed to evaluate the levels of such PAHs in river water and wastewater samples and evaluate their source and ecological risk. The status of these PAHs in the South African environment has not been investigated fully, which is a gap this study intended to fill. The PAHs were determined using solid-phase extraction (SPE) and dispersive liquid-liquid microextraction (DLLME) methods. The optimization and validation of these methods indicated that both methods can be used for the extraction of PAHs in liquid samples. This is because of the acceptable %recovery of 72.1%-118% for SPE and 70.7%-88.4% for DLLME with a %RSD less than 10% (indicating high precision) that was obtained. The limit of detection and limit of quantification ranged from 5.0 to 18 ng/L and 6.0-20 ng/L for SPE and from 10 to 44 ng/L and 11 to 63 ng/L for DLLME. These results demonstrated that SPE is more accurate and sensitive than DLLME, which was also confirmed by statistical analysis. The PAH concentration levels ranged from not detected (nd) to 1046 ng/L in river water and nd to 778 ng/L in wastewater samples with naphthalene demonstrating dominance over all other PAHs in both water matrices. The PAHs were found to be of petrogenic origin and posed low ecological risk on average. Integr Environ Assess Manag 2024;20:1598-1610. © 2024 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Recovery of an Antioxidant Derived from a Phenolic Diphosphite from Wastewater during the Production of a Polypropylene Compound: A Step towards Sustainable Management

Organic phosphoester (OPE) antioxidants are currently required due to their contribution to enhancing the quality of polymers, including polypropylene (PP). In this research, an integral methodology is presented for the efficient extraction of bis(2,4-dicumylphenyl) pentaerythritol diphosphite from industrial wastewater. Upon employing the solid-phase extraction (SPE) technique, the recovered compound is subjected to a comprehensive analysis of the recovered compound using high-performance liquid chromatography (HPLC), mass spectrometry (MS), thermal analysis (TGA), Fourier transforms infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC). Subsequently, purified Bis(2,4-dicumylphenyl) pentaerythritol diphosphite was evaluated as a thermo-oxidative stabilizer after incorporation into PP resins. The relative standard deviation (RSD), Error (Er), linearity (R2), and percentage (%) recovery were less than 2.6, 2.5, more significant than 0.9995, and greater than 96%, respectively, for the inter-day and intra-day tests of the chromatographic method and the SPE. Except for chloroform, which was necessary due to the solubility properties of the investigated analyte, the use of environmentally friendly solvents, such as methanol and acetonitrile, was considered during the development of this research. The OPE extracted from industrial wastewater was characterized by FTIR, UV-Vis, DSC, TGA, and MS, allowing the elucidation of the structure of Bis(2,4-dicumylphenyl) pentaerythritol diphosphite (BDPD). The recovered OPE was mixed with PP resins, allowing it to improve its thermal properties and minimize its thermo-oxidative degradation. Organophosphorus flame retardant (OPE)' concentration in wastewater is alarming, ranging from 1179.0 to 4709.6 mg L-1. These exceed toxicity thresholds for aquatic organisms, emphasizing global environmental risks. Using a validated solid-phase extraction (SPE) technique with over 94% recovery, the study addresses concerns by removing organic contaminants and supporting circular economy principles. The high economic and environmental significance of recovering BDPD underscores the need for urgent global attention and intervention.

Solid-phase microextraction - a future technique in pharmacology and coating trends

Traditional sample preparation techniques based on liquid-liquid extraction (LLE) or solid-phase extraction (SPE) often suffer from a major error due to the matrix effects caused by significant co-extraction of matrix components. The implementation of a modern extraction technique such as solid-phase microextraction (SPME) was aimed at reducing analysis time and the use of organic solvents, as well as eliminating pre-analytical and analytical errors. Solid-phase microextraction (SPME) is an innovative technique for extracting low molecular weight compounds (less than 1500 Da) from highly complex matrices, including biological matrices. It has a wide range of applications in various types of analysis including pharmaceutical, clinical, metabolomics and proteomics. SPME has a number of advantages over other extraction techniques. Among the most important are low environmental impact, the ability to sample and preconcentrate analytes in one step, simple automation, and the ability to extract multiple analytes simultaneously. It is expected to become, in the future, another method for cell cycle research. Numerous available literature sources prove that solid-phase microextraction can be a future technique in many scientific fields, including pharmaceutical sciences. This paper provides a literature review of trends in SPME coatings and pharmacological applications.

Recent advances in the use of SPME for drug analysis in clinical, toxicological, and forensic medicine studies

Solid-phase microextraction (SPME) has gained attention as a simple, fast, and non-exhaustive extraction technique, as its unique features enable its use for the extraction of many classes of drugs from biological matrices. This sample-preparation approach consolidates sampling and sample preparation into a single step, in addition to providing analyte preconcentration and sample clean-up. These features have helped SPME become an integral part of several analytical protocols for monitoring drug concentrations in human matrices in clinical, toxicological, and forensic medicine studies. Over the years, researchers have continued to develop the SPME technique, resulting in the introduction of novel sorbents and geometries, which have resulted in improved extraction efficiencies. This review summarizes developments and applications of SPME published between 2016 and 2022, specifically in relation to the analysis of central nervous system drugs, drugs used to treat cardiovascular disorders and bacterial infections, and drugs used in immunosuppressive and anticancer therapies.

Ionic liquid-based dispersive liquid-liquid microextraction of anthelmintic drug residues in small-stock meat followed by LC-ESI-MS/MS detection

An ionic liquid-based dispersive liquid-liquid microextraction (IL-DLLME) of 20 anthelmintic drugs followed and detected by liquid chromatography-tandem mass spectrometry (LC-MS/MS) has been developed, optimized, and validated. The parameters affecting the anthelmintic extraction efficiencies such as selection of extraction solvent (ionic liquids), selection of disperser solvent, volume of extraction solvent, volume of disperser solvent, pH of the aqueous phase, extraction time, salt addition, and centrifugation time were optimized. Validation was conducted according to ISO/IEC 17025:2017 and Commission Implementing Regulation (EU) 2021/808 of 22 March 2021. Validation parameters such as calibration function, matrix effect, limit of detection (LOD), limit of quantification (LOQ), decision limit (CCα), accuracy, and precision were established. Coefficient of determination (R 2) values ranging from .99938 to .99995 were obtained using the matrix calibration curve spiked at 0, 0.25, 1.0, 1.5, and 2.0 times MRL. The LODs and LOQs were calculated using the standard deviation of the response and the slopes of the calibration curves ranged from 0.35 to 26.1 μg/kg and from 1.2 to 87.0 μg/kg, respectively, and were dependent on calibration range. The CCα values ranged from 23 to 1022.0 μg/kg and are also dependent on the MRL concentration levels. The coefficient of variation (CV) values calculated are within the reproducibility range of 16%-30% adapted from the Horwitz Equation CV = 2(1-0.5 log C) and ranged from 1.7% to 16.9%. The developed and validated and the standard QuEChERS method were compared. The IL-DLLME LC-MS/MS method was applied to 32 small stock (18 caprine [goat] and 14 ovine [sheep]) liver samples received from municipal abattoirs at Botswana National Veterinary Laboratory for the analysis of anthelmintic drug residues. The results obtained indicated that the anthelmintic drug residues were all below the detection capability, and therefore, the samples were passed as fit for human consumption.

A novel non-invasive colorectal cancer diagnostic method: Volatile organic compounds as biomarkers

INTRODUCTION

Population-based fecal tests for colorectal cancer (CRC) screening have shown to reduce mortality thanks to the early detection of the disease. However, currently available fecal tests are limited in their sensitivity and specificity. Our aim is to look for volatile organic compounds in fecal samples as biomarkers for CRC detection.

MATERIAL AND METHODS

Eighty participants were included; 24 had adenocarcinoma, 24 had adenomatous polyps and 32 presented no neoplasms. Fecal samples were collected 48 h preceding the colonoscopy from all participants, except CRC patient samples that were collected after 3-4 weeks from the colonoscopy. Magnetic headspace adsorptive extraction (Mag-HSAE) followed by thermal desorption-gas chromatography-mass spectrometry (TD-GC-MS) was performed on stool samples to identify volatile organic compounds as biomarkers.

RESULTS

p-Cresol was significantly more abundant in the cancer samples (P < 0.001) with an area under the curve (AUC) of 0.85 (CI 95%; 0.737-0.953), having a sensitivity and specificity of 83% and 82%, respectively. In addition, 3(4H)-dibenzofuranone,4a,9b-dihydro-8,9b-dimethyl- (3(4H)-DBZ) was also more abundant in the cancer samples (P < 0.001) with an AUC of 0.77 (CI 95%; 0.635-0.905), sensitivity of 78% and specificity of 75%. When combined (p-cresol and 3(4H)-DBZ), the AUC was 0.86, sensitivity 87% and specificity 79%. p-Cresol also appeared to be promising as a biomarker for pre-malignant lesions with an AUC of 0.69 (CI 95%; 0.534-0.862), sensitivity 83% and specificity 63%, P = 0.045.

CONCLUSIONS

Volatile organic compounds emitted from feces and determined by a sensitive analytical methodology (Mag-HSAE-TD-GC-MS), employing a magnetic graphene oxide as extractant phase, could be used as a potential screening technology for CRC and pre-malignant lesions.

Occurrence of organic micropollutants in municipal landfill leachate and its effective treatment by advanced oxidation processes

Landfilling is the most prominently adopted disposal technique for managing municipal solid waste across the globe. However, the main drawback associated with this method is the generation of leachate from the landfill site. Leachate, a highly concentrated liquid consisting of both organic and inorganic components arises environmental issues as it contaminates the nearby aquifers. Landfill leachate treatment by conventional methods is not preferred as the treatment methods are not much effective to remove these pollutants. Advanced oxidation processes (AOPs) based on both hydroxyl and sulfate radicals could be a promising method to remove the micropollutants completely or convert them to non-toxic compounds. The current review focuses on the occurrence of micropollutants in landfill leachate, their detection methods and removal from landfill leachate using AOPs. Pharmaceuticals and personal care products occur in the range of 10^-1 to more than 100 μg L^-1 whereas phthalates were found below the detectable limit to 384 μg L^-1, pesticides in the order of 10^-1 μg L^-1 and polyaromatic hydrocarbons occur in concentration from 10^-2 to 114.7 μg L^-1. Solid-phase extraction is the most preferred method for extracting micropollutants from leachate and liquid chromatography (LC) - mass spectrophotometer (MS) for detecting the micropollutants. Limited studies have been focused on AOPs as a potential method for the degradation of micropollutants in landfill leachate. The potential of Fenton based techniques, electrochemical AOPs and ozonation are investigated for the removal of micropollutants from leachate whereas the applicability of photocatalysis for the removal of a wide variety of micropollutants from leachate needs in-depth studies.

Carbon xerogels combined with nanotubes as solid-phase extraction sorbent to determine metaflumizone and seven other surface and drinking water micropollutants

Carbon xerogels (CXs) were synthesized by polycondensation of resorcinol and formaldehyde, followed by thermal annealing, and subjected to hydrothermal oxidation. Solid-phase extraction (SPE) cartridges were filled with CXs and tested for extraction of metaflumizone and other seven environmental micropollutants (acetamiprid, atrazine, isoproturon, methiocarb, carbamazepine, diclofenac, and perfluorooctanesulfonic acid) before chromatographic analysis. The recoveries obtained with the pristine CX were low for most analytes, except for metaflumizone (69 ± 5%). Moreover, it was concluded that the adsorption/desorption process of the micropollutants performed better on CXs with a less acidic surface (i.e., pristine CX). Thus, cartridges were prepared with pristine CX and multi-walled carbon nanotubes (MWCNTs) in a multi-layer configuration. This reusable cartridge was able to simultaneously extract the eight micropollutants and was used to validate an analytical methodology based on SPE followed by ultra-high performance liquid chromatography-tandem mass spectrometry. A widespread occurrence of 6/8 target compounds was observed in surface water collected in rivers supplying three drinking water treatment plants and in the resulting drinking water at the endpoint of each distribution system. Therefore, the first study employing CXs and MWCNTs as sorbent in multi-layer SPE cartridges is herein reported as a proof of concept for determination of multi-class water micropollutants.

Determination of polycyclic aromatic hydrocarbons (PAHs) and organochlorine pesticides (OCPs) in some personal care products in Nigeria

The study was carried out to determine the presence and concentration of polycyclic aromatic hydrocarbons (PAHs) and organochlorine pesticides (OCPs) in some personal care products in Nigeria. Commonly used consumer care products grouped into four classes, namely: plastics, cosmetics, disinfectants and washing products, were purchased from some supermarkets in Ile-Ife, Nigeria. The solid samples were pulverized and the PAHs and OCPs were extracted with n-hexane and dichloromethane, respectively using Soxhlet extraction method, while the liquid samples were extracted using liquid-liquid extraction method. The quantitative and qualitative determinations were carried out using Gas Chromatography coupled with Flame Ionization Detector (GC-FID) for PAHs, and Gas Chromatography coupled with Electron Capture Detector (GC-ECD) for the OCPs. The results for PAHs analysis gave an overall mean concentration of 3259.10 ± 5223.16 μg g-1 for plastics and 8388.00 ± 7106.55 μg g-1 for cosmetics. Comparatively, the concentrations of PAHs in the cosmetic samples were higher than in plastics samples, while both values were greater than the recommended limits of PAHs in consumer care products as stipulated by the World Health Organization. For the OCPs, disinfectant samples had a total mean concentration of 10.65 ± 6.50 μg mL-1, while washing products had a total mean concentration of 35.31 ± 39.31 μg mL-1. The concentrations of OCPs in washing products were higher than their concentrations in disinfectant samples. The results of the OCPs in some samples were greater than Maximum Residual Limit (MRL) recommended by the European Commission. The study concluded that consumer care products used in this study contained PAHs and OCPs at levels that could be risky to human health if the consumer care products are not used with caution.

Synthesis and characterization of a molecularly imprinted polymer for the isolation of the 16 US-EPA priority polycyclic aromatic hydrocarbons (PAHs) in solution

A smart sorbent consisting of benzo[k]fluoranthene-imprinted and indeno[1 2 3-cd]pyrene-imprinted polymers mixed at 1:1 (w/w) was successfully screened from several cavity-tuning experiments and used in the isolation of polycyclic aromatic hydrocarbons from spiked solution. The polymer mixture showed high cross selectivity and affinity towards all the 16 US-EPA priority polycyclic aromatic hydrocarbons. The average extraction efficiency from a cyclohexane solution was 65 ± 13.3% (n = 16, SD). Batch adsorption and kinetic studies confirmed that the binding of polycyclic aromatic hydrocarbons onto the polymer particles resulted in formation of a monolayer and that the binding process was the rate limiting step. The imprinted polymer performance studies confirmed that the synthesized polymer had an imprinting efficiency of 103.9 ± 3.91% (n = 3, SD). A comparison of the theoretical number of cavities and the experimental binding capacity showed that the overall extent of occupation of the imprinted cavities in the presence of excess polycyclic aromatic hydrocarbons was 128 ± 6.45% (n = 3, SD). The loss of selectivity was estimated at 2.9% with every elution cycle indicating that the polymer can be re-used several times with limited loss of selectivity and sensitivity. The polymer combination has shown to be an effective adsorbent that can be used to isolate all the 16 US-EPA priority polycyclic aromatic hydrocarbons in solution.

Determination (monitoring) of PAHs in surface waters: why an operationally defined procedure is needed

The results of interlaboratory studies on the determination of selected PAHs in samples of pure water and water containing suspended matter are presented and discussed in this study. Determinations were performed by independent analytical laboratories which used different sample-preparation procedures, i.e. liquid-liquid extraction and solid-phase extraction with columns and speedisks. The study indicates that the results of PAHs determination depend on the type of isolation technique and the final determination procedure used by a given laboratory. Differences among the determined concentrations of specific PAHs reached 700%. In this work it has been shown that modern analysis does not offer isolation techniques for PAHs which would secure their speciation in the aquatic environment.

Inhibitory analysis of the effect of polycyclic aromatic hydrocarbons on the activity of chitinase by means of liquid chromatography-mass spectrometry of chitin oligosaccharides

The analytical method of determining enzyme activity by liquid chromatography-mass spectrometry (LC/MS) was developed and applied for investigation of the effect of polycyclic aromatic hydrocarbons (PAHs) on the enzyme activity of chitinase. The measurement of chitinase activity by LC/MS is useful in order to use the nonderivatized substrate, which can show in vivo chitinase activity. Substrate consumption and product formation were monitored in order to determine chitinase activity. It was shown that, for the first time, in vitro addition of PAHs inhibited the activity of chitinase in a noncompetitive manner. The IC(50) value of benzo[a]pyrene was 1.4 microM, and PAHs containing four or more aromatic rings showed the same or higher inhibitory effect, whereas PAHs with a lower number of aromatic rings showed lower inhibition of the chitinase activity than benzo[a]pyrene.

Analysis of polycyclic aromatic hydrocarbons (PAHs) in environmental samples: a critical review of gas chromatographic (GC) methods

Polycyclic aromatic hydrocarbons (PAHs) are frequently measured in the atmosphere for air quality assessment, in biological tissues for health-effects monitoring, in sediments and mollusks for environmental monitoring, and in foodstuffs for safety reasons. In contemporary analysis of these complex matrices, gas chromatography (GC), rather than liquid chromatography (LC), is often the preferred approach for separation, identification, and quantification of PAHs, largely because GC generally affords greater selectivity, resolution, and sensitivity than LC. This article reviews modern-day GC and state-of-the-art GC techniques used for the determination of PAHs in environmental samples. Standard test methods are discussed. GC separations of PAHs on a variety of capillary columns are examined, and the properties and uses of selected mass spectrometric (MS) techniques are presented. PAH literature on GC with MS techniques, including chemical ionization, ion-trap MS, time-of-flight MS (TOF-MS), and isotope-ratio mass spectrometry (IRMS), is reviewed. Enhancements to GC, for example large-volume injection, thermal desorption, fast GC, and coupling of GC to LC, are also discussed with regard to the determination of PAHs in an effort to demonstrate the vigor and robustness GC continues to achieve in the analytical sciences.