A comprehensive review on recent developments of radio frequency treatment for pasteurizing agricultural products

Electromagnetic wave-based technology for ready-to-eat foods preservation: a review of applications, challenges and prospects

In recent years, the ready-to-eat foods market has grown significantly due to its high nutritional value and convenience. However, these foods are also at risk of microbial contamination, which poses food safety hazards. Additionally, traditional high-temperature sterilization methods can cause food safety and nutritional health problems such as protein denaturation and lipid oxidation. Therefore, exploring and developing effective sterilization technologies is imperative to ensure food safety and nutritional properties, and protect consumers from potential foodborne diseases. This paper focuses on electromagnetic wave-based pasteurization technologies, including thermal processing technologies such as microwave, radio frequency, and infrared, as well as non-thermal processing technologies like ultraviolet, irradiation, pulsed light, and photodynamic inactivation. Furthermore, it also reviews the antibacterial mechanisms, advantages, disadvantages, and recent applications of these technologies in ready-to-eat foods, and summarizes their limitations and prospects. By comparing the limitations of traditional high-temperature sterilization methods, this paper highlights the significant advantages of these pasteurization techniques in effectively inhibiting microbial growth, slowing lipid oxidation, and preserving food nutrition and flavor. This review may contribute to the industrial application and process optimization of these pasteurization technologies, providing an optimal choice for preserving various types of ready-to-eat foods.

Application of radio frequency energy in processing of fruit and vegetable products

Thermal processing is commonly employed to ensure the quality and extend the shelf-life of fruits and vegetables. Radio frequency (RF) heating has been used as a promising alternative treatment to replace conventional thermal processing methods with advantages of rapid, volumetric, and deep penetration heating characteristics. This article provides comprehensive information regarding RF heating uniformity and applications in processing of fruit and vegetable products, including disinfestation, blanching, drying, and pasteurization. The dielectric properties of fruits and vegetables and their products have also been summarized. In addition, recommendations for future research on RF heating are proposed to enhance practical applications for fruits and vegetables processing in future.

Thermaland non-thermal pasteurization of citrus fruits: A bibliometrics analysis

Thermal and non-thermal pasteurization (TNP) process of food is not new to food technology, disparities in the merits and demerits of the two pasteurizations necessitate their uses concurrently. Bibliometric analysis of the subject matter is expedient to analyses of database for published publications. Especially to provide times, state-of-the art innovations and prospects of the techniques. In addressing these lacunas, we utilized VOSview visualization to establish connections among crucial elements within a dataset of 495 research publications gathered from Web of Science. This approach facilitated the identification of links and collaboration networks among key factors in the research landscape. Analysis of publications indicate thermal pasteurization is an age long practices, while non-thermal pasteurization is gaining more acceptance. This study exposed ranking differences in scholar's collaboration, citations of scholars, impactful institution and most published countries. United State, China, United Kingdom have largest publications of research in TNP among the top 10 countries. Coupling network and Sankey illustration showed new area of research where new researchers and scholars can begin new phase of findings.

Evaluating the effects of graphene nanoparticles combined radio-frequency thawing on the physicochemical quality and protein conformation in hairtail (Trichiurus lepturus) dorsal muscle

BACKGROUND

The thawing process is an essential step for a frozen marine fish. The present study aimed to investigate the effects of graphene magnetic nanoparticles combined radio-frequency thawing methods on frozen hairtail (Trichiurus lepturus) dorsal muscle. Seven thawing methods were used: air thawing, 4 °C cold storage thawing, water thawing, radio-frequency thawing (RT), radio frequency thawing combined with graphene nanoparticles (G-RT), radio frequency thawing combined with graphene oxide nanoparticles (GO-RT) and radio-frequency thawing combined with graphene magnetic nanoparticles (GM-RT). The thawing loss and centrifugal loss, electric conductivity, total volatile basic nitrogen, thiobarbituric acid reactive substances and color of thawed hairtail dorsal muscle were determined. The carbonyl content, total sulfhydryl groups, Ca2+ -ATPase activity, raman spectroscopy measurements and Fourier-transform infrared spectrometry measurements were determined using myofibrillar extracted from the dorsal muscle of hairtail. The water distribution was determined using low-field NMR techniques.

RESULTS

The results demonstrated that the RT, G-RT, GO-RT and GM-RT could significantly shorten the thawing time. Moreover, GO-RT and GM-RT efficiently preserved the color of fish dorsal muscle and reduced the impact of thawing on fish quality by reducing lipid and protein oxidation. Meanwhile, the myofibrillar protein structure thawed by GO-RT and GM-RT were more stable and had a more stable secondary structure, which maintained strong systemic stability at the same time as slowing down protein oxidation.

CONCLUSION

The results showed that GO-RT and GM-RT can significantly improve the thawing efficiency at the same time as effectively maintaining and improving the color and texture of thawed fish, slowing down the oxidation of proteins and lipids, and maintaining a good quality of thawed fish meat. © 2023 Society of Chemical Industry.

Radio frequency inactivation of Salmonella Typhimurium and Listeria monocytogenes in skimmed and whole milk powder

Milk powder is a convenient, shelf-stable food ingredient used in a variety of food products. However, pathogenic bacteria can be present and survive during prolonged storage, leading to outbreaks of foodborne diseases and product recalls. Radio frequency (RF) heating is a processing technology suitable for bulk treatment of milk powder, aiming at microbial inactivation. This study investigates the RF inactivation of Salmonella Typhimurium and Listeria monocytogenes in two types of milk powder; skimmed and whole milk powder. Specifically, the aims were to (i) examine the influence of the powder's composition on bacterial inactivation, (ii) evaluate the response of bacteria with different Gram properties (Gram positive and Gram negative) and (iii) verify the use of Enterococcus faecium as a surrogate for the two microorganisms for the specific RF process. In order to examine exclusively the influence of RF, a non-isothermal temperature profile was used, employing solely different RF energy levels to heat the product to the target temperatures. A log-linear model with a Bigelow-type temperature dependency was fitted to the experimental data. S. Typhimurium was less susceptible to RF treatments in comparison to L.monocytogenes, demonstrating a higher inactivation rate (k) and higher percentage of sublethal injury. A higher k was also observed for both microorganisms in the whole milk powder, indicating that the increased fat content and decreased levels of lactose and protein in the milk powder had an adverse impact on the microbial survival for both pathogens. The surrogate microorganism E. faecium successfully validated the microbial response of the two microorganisms to RF treatments. In general, a low heating rate RF-only process was successful in inactivating the two foodborne pathogens in skimmed and whole milk powder by 4 log(CFU/g).

Recent developments in applications of physical fields for microbial decontamination and enhancing nutritional properties of germinated edible seeds and sprouts: a review

Germinated edible seeds and sprouts have attracted consumers because of their nutritional values and health benefits. To ensure the microbial safety of the seed and sprout, emerging processing methods involving physical fields (PFs), having the characteristics of high efficiency and environmental safety, are increasingly proposed as effective decontamination processing technologies. This review summarizes recent progress on the application of PFs to germinating edible seeds, including their impact on microbial decontamination and nutritional quality and the associated influencing mechanisms in germination. The effectiveness, application scope, and limitation of the various physical techniques, including ultrasound, microwave, radio frequency, infrared heating, irradiation, pulsed light, plasma, and high-pressure processing, are symmetrically reviewed. Good application potential for improving seed germination and sprout growth is also described for promoting the accumulation of bioactive compounds in sprouts, and subsequently enhancing the antioxidant capacity under favorable PFs processing conditions. Moreover, the challenges and future directions of PFs in the application to germinated edible seeds are finally proposed. This review also attempts to provide an in-depth understanding of the effects of PFs on microbial safety and changes in nutritional properties of germinating edible seeds and a theoretical reference for the future development of PFs in processing safe sprouted seeds.

Influence of microbial cell morphology and composition on radio frequency heating of simple media at different frequencies

The effect of Listeria monocytogenes, Salmonella Typhimurium, and Saccharomyces cerevisiae on RF heating was studied in sterilized Milli-Q water and saline solution during treatments at 27.0 ± 0.6 MHz and 3.0 ± 0.02 MHz for 30 min. The presence of microorganisms caused a significant increase in temperature (maximum to 54.9 °C), with no significant decrease in cell numbers being observed for any conditions. For both media and frequencies, heating rates followed the order S. Typhimurium ≤ L. monocytogenes ≤ S. cerevisiae, except for heating at 3.0 ± 0.02 MHz in saline solution, where heating rates for S. cerevisiae and S. Typhimurium were equal. Generally, heating rates for microorganisms were significantly higher at 27.0 ± 0.6 MHz than at 3.0 ± 0.02 MHz, except for the S. cerevisiae case. Observed phenomena were probably caused by differences in the cell lipid and peptidoglycan content, with interaction effects with salt being present. This study was the first to investigate the influence of the presence of microorganisms on heating behavior of simple media. On the long term, more research on this topic could lead to finding specific RF frequencies more suitable for the heating of specific media and products for various applications.

Peanut Butter Food Safety Concerns-Prevalence, Mitigation and Control of Salmonella spp., and Aflatoxins in Peanut Butter

Peanut butter has a very large and continuously increasing global market. The food safety risks associated with its consumption are also likely to have impacts on a correspondingly large global population. In terms of prevalence and potential magnitude of impact, contamination by Salmonella spp., and aflatoxins, are the major food safety risks associated with peanut butter consumption. The inherent nature of the Salmonella spp., coupled with the unique chemical composition and structure of peanut butter, present serious technical challenges when inactivating Salmonella spp. in contaminated peanut butter. Thermal treatment, microwave, radiofrequency, irradiation, and high-pressure processing all are of limited efficacy in inactivating Salmonella spp. in contaminated peanut butter. The removal of aflatoxins in contaminated peanut butter is equally problematic and for all practical purposes almost impossible at the moment. Adopting good manufacturing hygiene practices from farm to table and avoiding the processing of contaminated peanuts are probably some of the few practically viable strategies for minimising these peanut butter food safety risks. The purpose of this review is to highlight the nature of food safety risks associated with peanut butter and to discuss the effectiveness of the initiatives that are aimed at minimising these risks.

Consumer Attitudes towards Food Preservation Methods

The development and scope of using various food preservation methods depends on the level of consumers’ acceptance. Despite their advantages, in the case of negative attitudes, producers may limit their use if it determines the level of sales. The aim of this study was to evaluate the perception of seven different food processing methods and to identify influencing factors, such as education as well as living area and, at the same time, to consider whether consumers verify this type of information on the labels. Additionally, the study included the possibility of influencing consumer attitudes by using alternative names for preservation methods, on the example of microwave treatment. The results showed that conventional heat treatments were the most preferred preservation methods, whereas preservatives, irradiation, radio waves and microwaves were the least favored, suggesting that consumers dislike methods connected with “waves” to a similar extent as their dislike for preservatives. The control factors proved to significantly modify the evaluation of the methods. The analysis of alternative names for microwave treatment showed that “dielectric heating” was significantly better perceived. These research findings are important as the basis for understanding consumer attitudes. Implications for business and directions of future research are also indicated.

Hot Air-Assisted Radio Frequency (HARF) Drying on Wild Bitter Gourd Extract

Wild bitter gourd (Momordica charantia L. var. abbreviata S.) is a kind of Chinese herbal medicine and is also a vegetable and fruit that people eat daily. Wild bitter gourd has many bioactive components, such as saponin, polysaccharide, and protein, and the extract is used to adjust blood sugar in patients with diabetes. The objective of this study was to investigate simultaneous hot air-assisted radio frequency (HARF) drying and pasteurization for bitter gourd extract, and then to evaluate its effects on blood sugar of type II diabetic mice. The results showed that the solid–liquid ratio of the wild bitter gourd powder to water was 1:10 and it was extracted using focused ultrasonic extraction (FUE) for only 10 min with 70 °C water. Then, 1 kg of concentrated bitter gourd extract was mixed with soybean fiber powder at a ratio of 2:1.1. It was dried by HARF, and the temperature of the sample could reach above 80 °C in only 12 min to simultaneously reduce moisture content (wet basis) from 58% to 15% and achieve a pasteurization effect to significantly reduce the total bacterial and mold counts. Type II diabetic mice induced by nicotinamide and streptozocin (STZ) for two weeks and then were fed four-week feeds containing 5% RF-dried wild gourd extract did not raise fasting blood glucose. Therefore, the dried powder of wild bitter gourd extracts by HARF drying had a hypoglycemic effect.

Nostoc sphaeroides Cyanobacteria: a review of its nutritional characteristics and processing technologies

Nostoc sphaeroides is an edible Cyanobacterium which has high nutritional value and is widely used in dietary supplements and therapeutic products. N. sphaeroides contains protein, fatty acid, minerals and vitamins. Its polysaccharides, phycobilin, phycobiliproteins and some lipids are highly bioactive. Thus, N. sphaeroides possesses anti-oxidation, anti-inflammation and cholesterol reducing functions. This paper reviews and evaluates the literature on nutritionally and functionally important compounds of N. sphaeroides. It also reviews and evaluates the processing of technologies used to process N. sphaeroides from fresh harvest to dry particulates including pretreatment, sterilization and drying, including their impact on sensorial and nutritional values. This review shows that a suitable combination of ultrasound, radio frequency and pulse spouted microwave with traditional sterilization and drying technologies greatly improves the sensorial and nutritive quality of processed N. sphaeroides and improves their shelf life; however, further research is needed to evaluate these hybrid technologies. Once suitably processed, N. sphaeroides can be used in food, cosmetics and pharmaceutical drugs as an ingredient.

Effects of radio frequency heating on microbial populations and physicochemical properties of buckwheat

Microbial contamination is a persistent problem for grain industry. Many studies have shown that radio frequency (RF) heating can effectively reduce pathogens populations in low moisture foods, but there is a lack on the efficacy to decontaminate natural microbiome. The main objectives of this study were to investigate the effects of different RF heating conditions on natural microbial populations and physicochemical properties of buckwheat. In this study, 30 buckwheat samples collected from 10 different Provinces in China were analyzed for their microbial loads, and the samples with the highest microbial populations were used for further study to select the suitable RF heating conditions. The results showed that microbial loads in tested buckwheat kernels were in the range of 3.4-6.2 log CFU/g. Samples from Shanxi (SX-3) had significantly higher microbial counts than other samples. The selected four temperature-time combinations: 75 °C-20 min, 80 °C-10 min, 85 °C-5 min, and 90 °C-0 min of RF heating could reduce microbial counts to <3.0 log CFU/g in buckwheat kernels at 16.5% w.b. moisture content. Furthermore, the reduction populations of the inoculated pathogens (Salmonella Typhimurium, Escherichia coli, Cronobacter sakazakii, and Bacillus cereus) reached 4.0 log CFU/g under the above conditions, and almost 5.0 log CFU/g especially at high temperature-short holding time combinations (85 °C-5 min and 90 °C-0 min). Besides, physicochemical properties evaluation also showed the insignificant color changes and nutrients loss after RF treatment at 90 °C-0 min. Therefore, the RF heating at 90 °C-0 min holds greater potential than the other lower temperature-longer holding time combinations for applications in buckwheat pasteurization.

Monitoring Thermal and Non-Thermal Treatments during Processing of Muscle Foods: A Comprehensive Review of Recent Technological Advances

Muscle food products play a vital role in human nutrition due to their sensory quality and high nutritional value. One well-known challenge of such products is the high perishability and limited shelf life unless suitable preservation or processing techniques are applied. Thermal processing is one of the well-established treatments that has been most commonly used in order to prepare food and ensure its safety. However, the application of inappropriate or severe thermal treatments may lead to undesirable changes in the sensory and nutritional quality of heat-processed products, and especially so for foods that are sensitive to thermal treatments, such as fish and meat and their products. In recent years, novel thermal treatments (e.g., ohmic heating, microwave) and non-thermal processing (e.g., high pressure, cold plasma) have emerged and proved to cause less damage to the quality of treated products than do conventional techniques. Several traditional assessment approaches have been extensively applied in order to evaluate and monitor changes in quality resulting from the use of thermal and non-thermal processing methods. Recent advances, nonetheless, have shown tremendous potential of various emerging analytical methods. Among these, spectroscopic techniques have received considerable attention due to many favorable features compared to conventional analysis methods. This review paper will provide an updated overview of both processing (thermal and non-thermal) and analytical techniques (traditional methods and spectroscopic ones). The opportunities and limitations will be discussed and possible directions for future research studies and applications will be suggested.

Monitoring Thermal Treatments Applied to Meat Using Traditional Methods and Spectroscopic Techniques: a Review of Advances over the Last Decade

Thermal treatments are often applied during processing or preparation of muscle foods aiming to both improve the palatability and organoleptic properties and to ensure the safety of the treated food. However, the application of inappropriate or severe thermal treatments can lead to undesirable changes in the sensory and nutritional quality of heat-processed products, and especially so for foods that are sensitive to thermal treatments, such as meat and meat products. The impact of traditional and new heat processing technologies (e.g. microwaving, ohmic, and radio frequency heating) on meat quality has been widely assessed by a wide range of conventional methods, such as sensory, microbiological, and physicochemical methods. Due to the destructive nature and the time required to perform these assessments, alternative online methods are highly needed in order to achieve continuous monitoring through online applications. In this review paper, both traditional and new heat processing methods and their impact on the quality of meat will be first briefly presented. The methods and techniques that have been applied to monitor changes induced by application of thermal treatments will be then discussed. The main focus will be put on the application of spectroscopic techniques, as rapid and non-destructive methods compared to most conventional techniques. Finally, future trends and possible applications and research directions will be suggested.