Synthesis and properties of fluorine-containing polyurethane based on long chain fluorinated polyacrylate

Synthesis and Properties of Cationic Core-Shell Fluorinated Polyurethane Acrylate

Vinyl-capped cationic waterborne polyurethane (CWPU) was prepared using isophorone diisocyanate (IPDI), polycarbonate diol (PCDL), N-methyldiethanolamine (MDEA), and trimethylolpropane (TMP) as raw materials and hydroxyethyl methacrylate (HEMA) as a capping agent. Then, a crosslinked FPUA composite emulsion with polyurethane (PU) as the shell and fluorinated acrylate (PA) as the core was prepared by core-shell emulsion polymerization with CWPU as the seed emulsion, together with dodecafluoroheptyl methacrylate (DFMA), diacetone acrylamide (DAAM), and methyl methacrylate (MMA). The effects of the core-shell ratio of PA/PU on the surface properties, mechanical properties, and heat resistance of FPUA emulsions and films were investigated. The results showed that when w(PA) = 30~50%, the stability of FPUA emulsion was the highest, and the particles showed a core-shell structure with bright and dark intersections under TEM. When w(PA) = 30%, the tensile strength reached 23.35 ± 0.08 MPa. When w(PA) = 50%, the fluorine content on the surface of the coating film was 14.75% and the contact angle was as high as 98.5°, which showed good hydrophobicity; the surface flatness of the film was observed under AFM. It is found that the tensile strength of the film increases and then decreases with the increase in the core-shell ratio and the heat resistance of the FPUA film is gradually increased. The FPUA film has excellent properties such as good impact resistance, high flexibility, high adhesion, and corrosion resistance.

Facile fabrication of self-roughened surfaces for superhydrophobic coatings via polarity-induced phase separation strategy

Rough structures have gained increasing attention since they are essential for surfaces with special wettability, which can be used for various applications. It is still a challenge to find a low-cost and simple way to fabricate rough surfaces despite extensive efforts. Herein, we report a facile strategy to fabricate self-roughened surfaces based on polarity-induced phase separation. The strategy relies on the migration of flexible chains of the nonpolar polysiloxane to airside, driven by surface tension and polarity difference with the polar crosslinker, which forms a self-roughened surface with numerous protrusions. It is worth noting that this strategy does not require strict control of procedures, since it is insensitive to environmental changes unlike other phase separation methods, as shown by the results of systematic studies on several key parameters. Modified fabrics and coatings exhibit excellent superhydrophobicity with a water contact angle higher than 160°. Moreover, due to the strong hydrogen bonds formed by the polar urea groups of the crosslinker with substrates, the abrasion resistance of the coating is significantly enhanced. It is believed that the proposed novel and facile strategy will be a promising candidate for industrial manufacturing.

A New Strategy for the Synthesis of Fluorinated Polyurethane

An alternating fluorinated copolymer based on chlorotrifluoroethylene (CTFE) and butyl vinyl ether (BVE) was synthesized by RAFT/MADIX living/controlled polymerization in the presence of S-benzyl O-ethyl dithiocarbonate (BEDTC). Then, using the obtained poly(CTFE-alt-BVE) as a macro chain transfer agent (macro-CTA), a block copolymer was prepared by chain extension polymerization of vinyl acetate (VAc). After a basic methanolysis process, the poly(vinyl acetate) (PVAc) block was transferred into poly(vinyl alcohol) (PVA). Finally, a novel fluorinated polyurethane with good surface properties due to the mobility of the flexible fluorinated polymer chains linked to the network was obtained via reaction of the copolymer bearing the blocks of PVA with isophorone diisocyanate (IPDI) as a cross-linking agent.

Preparation and Surface Properties Study of Novel Fluorine-Containing Methacrylate Polymers for Coating

A new structural fluorine-containing methacrylate monomer CH₂=C(CH₃)COOC–(CF₃)₂CF₂CF₂CF₃ (5) was synthesized derived from perfluoro-2-methyl-2-pentene (D₂). A homopolymer of 5 and copolymers of 5 and methacrylate with different alkyl chain length (chain length n = 1, 2, 4, 6, 8, 12, 18) were obtained. These new fluorinated acrylate polymers showed excellent water and oil repellency. The contact angle of the films of the homopolymer and part of the copolymers were similar with the corresponding polymers prepared from CH₂=CHC(O)OCH(C₃F₇)(CF(CF₃)₂), but greater than that of the C₆F₁₃(CF₃)CHOC(O)CH=CH₂ homopolymer. The structure-property relationship research indicated that the copolymers’ hydrophobicity decreased first and then increased with the increase of alkyl chain length. T_d of all the polymers were greater than 220 °C and T_g fluctuated within the range of −51~103.8 °C. Contact angle and T_g could be adjusted by controlling the feed ratio of monomer to meet the requirements of technical indicators in the practical applications. The outstanding liquid repellency and thermal stability make monomer 5 a promising alternative to perfluorinated long-chain fluorosurfactants.

Synthesis, characterization, and nonlinear optical (NLO) properties of truxene-cored diphenylamine derivatives

Three star-shaped compounds based on a truxene core (FS11, FS12 and FS13) were prepared. The truxene core is incorporating with asymmetric diphenylamines, including one phenyl of diphenylamine substituted by methoxy group and the other phenyl substituted by tolyl, fluorophenyl and phenylethynyl for FS11, FS12 and FS13, respectively. Their one-photon, two-photon absorption, geometric structures, electrochemical behavior and thermal properties were investigated. The absorption maxima of charge transfer band for FS11, FS12 and FS13 are 375nm, 373nm and 383nm, and the corresponding molar extinction coefficients of FS11, FS12 and FS13 is 79,950M^-1cm^-1, 67,220M^-1cm^-1 and 108,780M^-1cm^-1. The "pull-push" structure promotes charge transfer between asymmetric diphenylamine branches and the truxene core. Their two-photon absorbtion property is measured by two-photon induced fluorescence. The maximum two-photon cross-sections values of FS11, FS12 and FS13 are excited at 750nm, which are 260 GM, 204GM and 367 GM, respectively.