Thermoresponsive drug delivery using liquid crystal-embedded cellulose nitrate membranes

In-vitro Release Evaluation of Growth Hormone from an Injectable In-Situ Forming Gel Using PCL-PEG-PCL Thermosensitive Triblock

OBJECTIVE

An injectable long acting In-Situ Forming Gel (ISFG) of human Growth Hormone (hGH) was prepared by using triblock PCL-PEG-PCL (Mw 1500-1500-1500). Ring-Opening Polymerization (ROP) of triblock using microwave was applied.

METHODS

The BCA protein assay Kit was used to determine the concentration of hGH in the in-vitro release medium. Finally, Sodium Dodecyl Sulfate-Polyacrylamide Gel Electrophoresis (SDS-PAGE) tests and Circular Dichroism (CD) spectrum were done to approve the stability of released hGH. The result of ROP demonstrated that the proportion of PCL to PEG accorded with the initial molar ratio of the monomers. The cross-section of the Surface Electron Microscopy (SEM) indicated the porous framework of the hydrogel could load the drug into its tridimensional matrixes structure. There is the low initial burst release of hGH from the supramolecular hydrogel.

RESULTS

The maximum in-vitro release of hGH was 71.2 % ± 1.5 that were due to hGH degrading after this time (21 days). The CD spectrum and SDS-PAGE results confirmed the stability of hGH during invitro release evaluation.

CONCLUSION

The results suggest that the sustained-release formulation using PCL-PEG-PCL can be applied to control the release of hGH.

Poly-Amido-Saccharides (PASs): Functional Synthetic Carbohydrate Polymers Inspired by Nature

Carbohydrates are ubiquitous in nature, playing vital roles in all organisms ranging from metabolism to intercellular signaling. Polysaccharides, repeating units of small molecule carbohydrates, are hydrophilic, densely functionalized, stereoregular, and rigid macromolecules, and these characteristics are simultaneously advantageous in biomedical applications while presenting major hurdles for synthetic methodology and development of structure property relationships. While naturally obtained polysaccharides are widely utilized in the biochemical and medical literature, their poor physicochemical definition and the potential for contaminated samples hinders the clinical translation of this work. To address the need for new methods to synthesize carbohydrate polymers, we reported a novel class of biomaterials (Poly-Amido-Saccharides; PAS) in 2012. PASs share many properties with natural polysaccharides, such as hydrophilicity, dense hydroxyl functionality, stereoregularity, and a rigid backbone. PASs are connected by an α-1,2-amide linkage, instead of an ether linkage, that confers resistance to enzymatic and hydrolytic degradation and leads to a unique helical conformation. Importantly, our synthetic methodology affords control over molecular weight distribution resulting in pure, well-defined polymers. This Account provides an overview of the development of PAS, from the factors that initially motivated our research to current efforts to translate functional PAS to biomedical applications. We detail the synthesis of glucose- and galactose-based PAS and their biophysical properties including conformation analysis, lectin interactions, cell internalization, and water solubility. Additionally, we describe postpolymerization modification strategies to afford PASs that act as protein stabilizers. We also highlight our recent efforts toward a mechanistic understanding of monomer synthesis via [2 + 2] cycloaddition reactions in order to develop novel monomers with different stereochemistry and amine or alkyl functionality, thereby accessing functional carbohydrate polymers. Throughout our work, we apply computational and theoretical analysis to explain how properties at the monomer level (e.g., stereochemistry, functionality) significantly impact polymer properties, helical conformation, and bioactivities. Collectively, the results from the theoretical, synthetic, and applied aspects of this research advance us toward our goal of utilizing PASs in key biomedical applications as alternatives to natural polysaccharides. The importance of carbohydrates in nature and the versatility of their functions continue to inspire our investigation of new monomers, polymers, and copolymers, leveraging the advantageous properties of PAS to develop potential therapies.

Thermoresponsive gating membranes embedded with liquid crystal(s) for pulsatile transdermal drug delivery: An overview and perspectives

Due to the circadian rhythm regulation of almost every biological process in the human body, physiological and biochemical conditions vary considerably over the course of a 24-h period. Thus, optimal drug delivery and therapy should be effectively controlled to achieve the desired therapeutic plasma concentrations and therapeutic drug responses at the required time according to chronopharmacological concepts, rather than continuous maintenance of constant drug concentrations for an extended time period. For many drugs, it is not always necessary to constantly deliver a drug into the human body under disease conditions due to rhythmic variations. Pulsatile drug delivery systems (PDDSs) have been receiving more attention in pharmaceutical development by providing a predetermined lag period, followed by a fast or rate-controlled drug release after application. PDDSs are characterized by a programmed drug release, which may release a drug at repeatable pulses to match the biological and clinical needs of a given disease therapy. This review article focuses on thermoresponsive gating membranes embedded with liquid crystals (LCs) for transdermal drug delivery using PDDS technology. In addition, the principal rationale and the advanced approaches for the use of PDDSs, the marketed products of chronotherapeutic DDSs with pulsatile function designed by various PDDS technologies, pulsatile drug delivery designed with thermoresponsive polymers, challenges and opportunities of transdermal drug delivery, and novel approaches of LC systems for drug delivery are reviewed and discussed. A brief overview of all academic research articles concerning single LC- or binary LC-embedded thermoresponsive membranes with a switchable on-off permeation function through topical application by an external temperature control, which may modulate the dosing interval and administration time according to the therapeutic needs of the human body, is also compiled and presented. In the near future, since thermal-based approaches have become a well-accepted method to enhance transdermal delivery of different water-soluble drugs and macromolecules, a combination of the thermal-assisted approach with thermoresponsive LCs membranes will have the potential to improve PDDS applications but still poses a great challenge.

Adjuvant Biophysical Therapies in Osteosarcoma

Osteosarcoma (OS) is a primary bone sarcoma, manifesting as osteogenesis by malignant cells. Nowadays, patients’ quality of life has been improved, however continuing high rates of limb amputation, pulmonary metastasis and drug toxicity, remain unresolved issues. Thus, effective osteosarcoma therapies are still required. Recently, the potentialities of biophysical treatments in osteosarcoma have been evaluated and seem to offer a promising future, thanks in this field as they are less invasive. Several approaches have been investigated such as hyperthermia (HT), high intensity focused ultrasound (HIFU), low intensity pulsed ultrasound (LIPUS) and sono- and photodynamic therapies (SDT, PDT). This review aims to summarize in vitro and in vivo studies and clinical trials employing biophysical stimuli in osteosarcoma treatment. The findings underscore how the technological development of biophysical therapies might represent an adjuvant role and, in some cases, alternative role to the surgery, radio and chemotherapy treatment of OS. Among them, the most promising are HIFU and HT, which are already employed in OS patient treatment, while LIPUS/SDT and PDT seem to be particularly interesting for their low toxicity.

Magnetic Mesoporous Calcium Sillicate/Chitosan Porous Scaffolds for Enhanced Bone Regeneration and Photothermal-Chemotherapy of Osteosarcoma

The development of multifunctional biomaterials to repair bone defects after neoplasm removal and inhibit tumor recurrence remained huge clinical challenges. Here, we demonstrate a kind of innovative and multifunctional magnetic mesoporous calcium sillicate/chitosan (MCSC) porous scaffolds, made of M-type ferrite particles (SrFe₁₂O₁₉), mesoporous calcium silicate (CaSiO₃) and chitosan (CS), which exert robust anti-tumor and bone regeneration properties. The mesopores in the CaSiO₃ microspheres contributed to the drug delivery property, and the SrFe₁₂O₁₉ particles improved photothermal therapy (PTT) conversion efficacy. With the irradiation of NIR laser, doxorubicin (DOX) was rapidly released from the MCSC/DOX scaffolds. In vitro and in vivo tests demonstrated that the MCSC scaffolds possessed the excellent anti-tumor efficacy via the synergetic effect of DOX drug release and hyperthermia ablation. Moreover, BMP-2/Smad/Runx2 pathway was involved in the MCSC scaffolds promoted proliferation and osteogenic differentiation of human bone marrow stromal cells (hBMSCs). Taken together, the MCSC scaffolds have the ability to promote osteogenesis and enhance synergetic photothermal-chemotherapy against osteosarcoma, indicating MCSC scaffolds may have great application potential for bone tumor-related defects.

Near-Infrared Light Responsive Folate Targeted Gold Nanorods for Combined Photothermal-Chemotherapy of Osteosarcoma

Folate-targeted gold nanorods (GNRs) are proposed as selective theranostic agents for osteosarcoma treatment. An amphiphilic polysaccharide based graft-copolymer (INU-LA-PEG-FA) and an amino derivative of the α,β-poly(N-2-hydroxyethyl)-d,l-aspartamide functionalized with folic acid (PHEA-EDA-FA), have been synthesized to act as coating agents for GNRs. The obtained polymer-coated GNRs were characterized in terms of size, shape, zeta potential, chemical composition, and aqueous stability. They protected the anticancer drug nutlin-3 and were able to deliver it efficiently in different physiological media. The ability of the proposed systems to selectively kill tumor cells was tested on U2OS cancer cells expressing high levels of FRs and compared with human bronchial epithelial cells (16HBE) and human dermal fibroblasts (HDFa). The property of the nanosystems of efficiently controlling drug release upon NIR laser irradiation and of acting as an excellent hyperthermia agent as well as Two Photon Luminescence imaging contrast agents was demonstrated. The proposed folate-targeted GNRs have also been tested in terms of chemoterapeutic and thermoablation efficacy on tridimensional (3-D) osteosarcoma models.

A combined therapy of rtPA-loaded thermoresponsive gels and ultrasound on hematoma in a rat model of intracerebral hemorrhage

To develop and validate an effective method for the removal of residual intracerebral hematoma, we prepared a recombinant tissue-type plasminogen activator (rtPA)-loaded Pluronic F127 (NP-rtPA) delivery system to evaluate the neurological response of the ICH rat model.

Synthesis and in vitro characterizations of porous carboxymethyl cellulose-poly(ethylene oxide) hydrogel film

BACKGROUND

Cellulose and its derivatives such as carboxymethyl cellulose (CMC) have been employed as a biomaterial for their diverse applications such as tissue engineering, drug delivery and other medical materials. Porosity of the scaffolds has advantages in their applications to tissue engineering such as more cell adhesion and migration leading to better tissue regeneration. After synthesis of CMC-poly(ethylene oxide) (PEO) hydrogel by mixing the solutions of both CMC-acrylate and PEO-hexa-thiols, fabrication and evaluation of a CMC-PEO gel and its film in porous form have been made for its possible applications to tissue regeneration. Physicochemical and biological properties of both CMC-PEO hydrogel and porous films have been evaluated by using physicochemical assays by SEM, FTIR and swelling behaviors as well as in vitro assays of MTT, Neutral red, BrdU, gel covering and tissue ingrowth into the pores of the CMC-PEO gel films. Degradation of CMC-PEO hydrogel was also evaluated by treating with esterase over time.

RESULTS

Chemical grafting of acrylate to CMC was verified by analyses of both FTIR and NMR. CMC-PEO hydrogel was obtained by mixing two precursor polymer solutions of CMC-acrylate and PEO-hexa-thiols and by transforming into a porous CMC-PEO gel film by gas forming of ammonium bicarbonate particles. The fabricated hydrogel has swollen in buffer to more than 6 times and degraded by esterase. The results of in vitro assays of live and dead, MTT, BrdU, Neutral red and gel covering on the cells showed excellent cell compatibility of CMC-PEO hydrogel and porous gel films. Furthermore the porous films showed excellent in vitro adhesion and migration of cells into their pore channels as observed by H&E and MT stains.

CONCLUSIONS

Both CMC-PEO hydrogel and porous gel films showed excellent biocompatibility and were expected to be a good candidate scaffold for tissue engineering.

Quantum dot thermometry evaluation of geometry dependent heating efficiency in gold nanoparticles

Quantum dot based thermometry, in combination with double beam confocal microscopy, was used to investigate the absorption/heating efficiency of gold nanoparticles with different morphologies (nanorods, nanocages, nanoshells, and nanostars), all of them with an intense localized surface plasmon resonance within the first biological window, at around 808 nm. The heating efficiency was found to be strongly dependent on the geometry of the nanostructure, with the largest values found for gold nanorods and long-edge gold nanostars, both of them with heating efficiencies close to 100%. Gold nanorods and nanocages were found to have the largest absorption cross section per unit mass among all the studied geometries, emerging as optimum photothermal agents with minimum metal loading for biosystems.

Heating efficiency of multi-walled carbon nanotubes in the first and second biological windows

Quantum dot based-thermometry, in combination with double beam confocal microscopy and infrared thermal imaging, has been used to investigate the heating efficiency of multi-walled carbon nanotubes (MWCNTs) under optical excitation within the first (808 nm) and second (1090 nm) biological windows as well as in the spectral region separating them (980 nm). It has been found that for the three excitation wavelengths the heating efficiency of MWCNTs (10 nm in diameter and 1.5 μm in length) is close to 50%. Despite this "flat" heating efficiency, we have found that the excitation wavelength is, indeed, critical during in vivo experiments due to the spectral dependence of both tissue absorption and scattering coefficients. It has been concluded that efficiency and selectivity of in vivo photothermal treatments based on MWCNTs are simultaneously optimized when laser irradiation lies within the first or second biological window.

Novel application of Eudragit RL and cholesteryl oleyl carbonate to thermo-sensitive drug delivery system

The Eudragit RL 100 and propylene glycol (PG) membranes with and without cholesteryl oleyl carbonate (COC) were prepared by the solvent casting method to pioneer a novel application of a thermo-sensitive drug delivery system. After that, the properties of these membranes were investigated by thermal, scanning, and porosity studies. Drug permeation studies through all membranes were carried out using salbuthamol sulphate (SBS) at constant temperatures (25°C and 37°C), respectively. The permeability of SBS through the membranes with COC has been shown to be a discontinuous function of temperature, that is, their permeability increased steeply above the phase transition temperature (37°C) of the COC. The thermo-sensitive permeation mechanism for the membranes might be based on the structure change of the membranes caused by the phase transition, so that the membranes could absorb more water. Considering the high biological safety of Eudragit RL 100 and PG membranes with and without COC might be used to develop a novel thermo-sensitive drug delivery system.

Temperature modulated drug permeation through liquid crystal embedded cellulose membranes

Stimuli-sensitive membranes may act as "on-off switches" or "permeability valves", producing patterns of pulsatile release, where the period and rate of mass transfer can be controlled by external or environmental triggers. In this study, cellulose nitrate (CN) and cellulose acetate (CA) monolayer membranes containing thermotropic liquid crystals (LC) were developed as thermoresponsive barriers for drug permeation. A low molecular thermotropic LC, n-heptyl-cyanobiphenyl (K21), with nematic to isotropic phase transition temperature (T(n-i)) of 41.5 degrees C was chosen to modulate drug permeation. Methimazole and paracetamol as hydrophilic and hydrophobic drug models were used, respectively. It was found that upon changing the temperature of the system around the T(n-i), both cellulose membranes without LC showed no temperature sensitivity to drug permeation, whereas the results for LC entrapped membranes exhibited a distinct jump in permeability when temperature was raised to above the T(n-i) of the liquid crystal for both drug models. On the other hand, drug permeation through these LC embedded membranes can be thermally modulated. Thermoresponsive drug permeation through the membranes was reversible, reproducible and followed zero order kinetics. Liquid crystal embedded cellulose acetate membranes showed more temperature sensitivity than liquid crystal embedded cellulose nitrate membranes, apparently due to higher LC loading in their porous matrix compared to CN membranes. The pattern of on-off permeation through LC embedded membranes was more distinguished for methimazole compared to that of paracetamol, seemingly due to its lower molecular weight.