Micro/nanosystems and biomaterials for controlled delivery of antimicrobial and anti-biofilm agents

The (re)emergence of aerosol delivery: Treatment of pulmonary diseases and its clinical challenges

Aerosol delivery represents a rapid and non-invasive way to directly reach the lungs while escaping the hepatic first-pass effect. The development of pulmonary drugs for respiratory diseases such as cystic fibrosis, lung infections, pulmonary fibrosis or lung cancer requires an enhanced understanding of the relationships between the natural physiology of the respiratory system and the pathophysiology of these conditions. This knowledge is crucial to better predict and thereby control drug deposition. Moreover, aerosol administration faces several challenges, including the pulmonary tract, immune system, mucociliary clearance, the presence of fluid on the airway surfaces, and, in some cases, bacterial colonisation. Each of them directly influences on the bioavailability of the active molecule. In addition to these challenges, particle size and the device used to administer the treatment are critical factors that can significantly impact the biodistribution of the drugs. Nanoparticles are very promising in the development of new formulations for aerosol drug delivery, as they can be fine-tuned to reach the entire pulmonary tract and overcome the difficulties encountered along the way. However, to properly assess drug delivery, preclinical studies need to be more thorough to efficiently enhance drug delivery.

New antibiofilm strategies for the management of nontuberculous mycobacteria diseases

INTRODUCTION

Nontuberculous mycobacteria (NTM) represent a group of microorganisms comprising more than 190 species. NTM infections have increased recently, and their treatment is a major challenge because to their resistance to conventional treatments. This review focuses on innovative strategies aimed at eradicating NTM biofilms, a critical factor in their resistance. Important areas addressed include biofilm formation mechanisms, current therapeutic challenges, and novel treatment approaches. The main objective is to compile and analyze information on these emerging strategies, identifying pivotal research directions and recent advancements.

AREAS COVERED

A review of the scientific literature was conducted to identify emerging novel therapies for the treatment of NTM infections and to explore potential synergies with existing treatments.

EXPERT OPINION

Experts highlights a limited understanding of optimal treatment regimens, often supported by insufficient scientific evidence. Current therapies are typically prolonged, involve multiple antibiotics with adverse effects, and frequently do not achieve patient cure. Certain species are even considered virtually impossible to eradicate. A thorough understanding of these new approaches is imperative for improving patients outcomes. This review provides a robust foundation for developing of more effective antibacterial strategies, which are essential because of the increasing incidence of NTM infections and the limitations of existing therapies.

Drug-loaded lipid nanoparticles improve the removal rates of the Staphylococcus aureus biofilm

Biofilms of the foodborne pathogen Staphylococcus aureus show improved resistance to antibiotics and are difficult to eliminate. To enhance antibacteria and biofilm dispersion via extracellular matrix diffusion, a new lipid nanoparticle was prepared, which employed a mixture of phospholipids and a 0.8% surfactin shell. In the lipid nanoparticle, 31.56 μg mL-1 of erythromycin was encapsulated. The lipid nanoparticle size was approximately 52 nm and the zeta-potential was -67 mV, which was measured using a Marvin laser particle size analyzer. In addition, lipid nanoparticles significantly dispersed the biofilms of S. aureus W1, CICC22942, and CICC 10788 on the surface of stainless steel, reducing the total viable count of bacteria in the biofilms by 103 CFU mL-1 . In addition, the lipid nanoparticle can remove polysaccharides and protein components from the biofilm matrix. The results of laser confocal microscopy showed that the lipid nanoparticles effectively killed residual bacteria in the biofilms. Thus, to thoroughly eliminate biofilms on material surfaces in food factories to avoid repeated contamination, drug-lipid nanoparticles present a suitable method to achieve this.

Recent Updates in Inhalable Drug Delivery System against Various Pulmonary Diseases: Challenges and Future Perspectives

In the current scenario, pulmonary disease has become a prime burden for morbidity and mortality alongside tremendous social and economic crises throughout the world. Numerous conventional drug delivery system and treatment approach targeting the respiratory region has been driven out. However, effective and accurate recovery has not been achieved yet. In this regard, nanotechnological- based inhalable drug delivery strategy including polymeric, lipidic, or metallic-based respirable microparticles plays an indispensable role in circumventing numerous challenges faced during traditional treatment. Excellent aerodynamic performance leads to enhanced lung targetability, reduced dosing frequency and hence systemic toxicities, as well as improved pharmaceutical attributes, and therefore pharmacokinetic profiles are interminable factors associated with nanotechnologicalbased inhalable delivery. In this review, we comprehensively explored recent advancements in nanotechnologically engineered inhalable formulations targeting each of the mentioned pulmonary diseases. Moreover, we systematically discussed possible respiratory or systemic toxicities about the indeterminate and undefined physicochemical characteristics of inhaled particles.

Nanomedicine against biofilm infections: A roadmap of challenges and limitations

Microbial biofilms are complex three-dimensional structures where sessile microbes are embedded in a polymeric extracellular matrix. Their resistance toward the host immune system as well as to a diverse range of antimicrobial treatments poses a serious health and development threat, being in the top 10 global public health threats declared by the World Health Organization. In an effort to combat biofilm-related microbial infections, several strategies have been developed to independently eliminate biofilms or to complement conventional antibiotic therapies. However, their limitations leave room for other treatment alternatives, where the application of nanotechnology to biofilm eradication has gained significant relevance in recent years. Their small size, penetration efficiency, and the design flexibility that they present makes them a promising alternative for biofilm infection treatment, although they also present set-backs. This review aims to describe the main possibilities and limitations of nanomedicine against biofilms, while covering the main aspects of biofilm formation and study, and the current therapies for biofilm treatment. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease Toxicology and Regulatory Issues in Nanomedicine > Toxicology of Nanomaterials Toxicology and Regulatory Issues in Nanomedicine > Regulatory and Policy Issues in Nanomedicine.

Biofilm in sino-nasal infectious diseases: the role nasal cytology in the diagnostic work up and therapeutic implications

BACKGROUD

Biofilm formation has been recently recognised as one of the most important etiopathological mechanisms underlying chronic rhinosinusitis (CRS) and its recalcitrance. In this context, nasal cytology (NC) has become an integral part of diagnostic work up of patients suffering from sino-nasal diseases, since it is an easy-to-apply, reproducible and non-invasive diagnostic tool that allows to assess both the nasal inflammatory infiltrate and the presence of biofilms on nasal mucosal surface, further orienting the therapeutic choices in case of infectious diseases for eradicating infections and biofilms. Nevertheless, biofilms are typically resistant to common antibiotic treatments and may trigger or maintain chronic inflammation. Hence, the importance of correctly detecting the presence of biofilm and identifying new effective treatments.

PURPOSE

The aim of this brief review is to better clarify the role of biofilm in the pathogenesis and recurrence of sino-nasal disorders and to highlight the role of nasal cytology (NC) in the rhino-allergologic diagnostic path and in the evaluation of the effectiveness of new treatments.

Nanomaterials-Based Wound Dressing for Advanced Management of Infected Wound

The effective prevention and treatment of bacterial infections is imperative to wound repair and the improvement of patient outcomes. In recent years, nanomaterials have been extensively applied in infection control and wound healing due to their special physiochemical and biological properties. Incorporating antibacterial nanomaterials into wound dressing has been associated with improved biosafety and enhanced treatment outcomes compared to naked nanomaterials. In this review, we discuss progress in the application of nanomaterial-based wound dressings for advanced management of infected wounds. Focus is given to antibacterial therapy as well as the all-in-one detection and treatment of bacterial infections. Notably, we highlight progress in the use of nanoparticles with intrinsic antibacterial performances, such as metals and metal oxide nanoparticles that are capable of killing bacteria and reducing the drug-resistance of bacteria through multiple antimicrobial mechanisms. In addition, we discuss nanomaterials that have been proven to be ideal drug carriers for the delivery and release of antimicrobials either in passive or in stimuli-responsive manners. Focus is given to nanomaterials with the ability to kill bacteria based on the photo-triggered heat (photothermal therapy) or ROS (photodynamic therapy), due to their unparalleled advantages in infection control. Moreover, we highlight examples of intelligent nanomaterial-based wound dressings that can detect bacterial infections in-situ while providing timely antibacterial therapy for enhanced management of infected wounds. Finally, we highlight challenges associated with the current nanomaterial-based wound dressings and provide further perspectives for future improvement of wound healing.

Engineered organic nanoparticles to combat biofilms

Biofilms are colonies of microorganisms that are embedded in autocrine extracellular polymeric substances (EPS), imparting antibiotic resistance and recalcitrant bacterial infection. Nanoparticles (NPs) can enhance the biofilm inhibition and eradication of delivered antibiotics. This is mainly because of enhanced EPS penetration and a high local drug concentration. As we discuss here, novel strategies are being developed to further enhance the antibiofilm capacity of NPs, including size optimization, surface modification, stimuli-triggered release, and combined strategies. Thus, NPs represent an effective and promising approach to combat biofilms.

Therapeutic applications of electrospun nanofibers impregnated with various biological macromolecules for effective wound healing strategy - A review

A Non-healing infected wound is an ever-growing global epidemic, with increasing burden of mortality rates and management costs. The problems of chronic wound infections and their outcomes will continue as long as their underlying causes like diabetic wounds grow and spread. Commercial wound therapies employed have limited potential that inhibits pivotal functions and tissue re-epithelialization properties resulting in wound infections. Nanomaterial based drug delivery formulations involving biological macromolecules are developing areas of interest in wound healing applications which are utilized in the re-epithelialization of skin with cost-effective preparations. Research conducted on nanofibers has shown enhanced skin establishment with improved cell proliferation and growth and delivery of bioactive organic molecules at the wound site. However, drug targeted delivery with anti-scarring properties and tissue regeneration aspects have not been updated and discussed in the case of macromolecule impregnated nanofibrous mats. Hence, this review focuses on the brief concepts of wound healing and wound management, therapeutic commercialized wound dressings currently available in the field of wound care, effective electrospun nanofibers impregnated with different biological macromolecules and advancement of nanomaterials for tissue engineering have been discussed. These new findings will pave the way for producing anti-scarring high effective wound scaffolds for drug delivery.

Biofilm Formation by Staphylococcus aureus in the Specific Context of Cystic Fibrosis

Staphylococcus aureus is a major human pathogen whose characteristics support its success in various clinical settings including Cystic Fibrosis (CF). In CF, S. aureus is indeed the most commonly identified opportunistic pathogen in children and the overall population. S. aureus colonization/infection, either by methicillin-susceptible or methicillin-resistant strains, will become chronic in about one third of CF patients. The persistence of S. aureus in CF patients' lungs, despite various eradication strategies, is favored by several traits in both host and pathogen. Among the latter, living in biofilm is a highly protective way to survive despite deleterious environmental conditions, and is a common characteristic shared by the main pathogens identified in CF. This is why CF has earned the status of a biofilm-associated disease for several years now. Biofilm formation by S. aureus, and the molecular mechanisms governing and regulating it, have been extensively studied but have received less attention in the specific context of CF lungs. Here, we review the current knowledge on S. aureus biofilm in this very context, i.e., the importance, study methods, molecular data published on mono- and multi-species biofilm and anti-biofilm strategies. This focus on studies including clinical isolates from CF patients shows that they are still under-represented in the literature compared with studies based on reference strains, and underlines the need for such studies. Indeed, CF clinical strains display specific characteristics that may not be extrapolated from results obtained on laboratory strains.

Antimicrobial polymeric biomaterials based on synthetic, nanotechnology, and biotechnological approaches

Antimicrobial resistance is the main threat to biomaterial failure with a huge impact on National Health Systems and patients' quality of life. Materials engineering and biotechnology have experienced great advances and have converged in the development of new and more sophisticated biomimetic systems with antimicrobial properties. In this sense, polymeric biomaterials play and will play a key role in the development of new antimicrobial devices for biomedical applications. In this Current Opinion article, we review recent and relevant advances reported in the field of polymeric biomaterials with antimicrobial properties with the potential to be applied in the clinic, that is, antimicrobial polymers, antifouling surfaces, nanodelivery systems of antibiotics and antiseptic drugs, biocide polymer-metal hybrid systems, and engineered living materials that actively interact with the pathogen. We conclude with a discussion on the implications of the results for clinical practice and future research.

Advances in Nanostructures for Antimicrobial Therapy

Microbial infections caused by a variety of drug-resistant microorganisms are more common, but there are fewer and fewer approved new antimicrobial chemotherapeutics for systemic administration capable of acting against these resistant infectious pathogens. Formulation innovations of existing drugs are gaining prominence, while the application of nanotechnologies is a useful alternative for improving/increasing the effect of existing antimicrobial drugs. Nanomaterials represent one of the possible strategies to address this unfortunate situation. This review aims to summarize the most current results of nanoformulations of antibiotics and antibacterial active nanomaterials. Nanoformulations of antimicrobial peptides, synergistic combinations of antimicrobial-active agents with nitric oxide donors or combinations of small organic molecules or polymers with metals, metal oxides or metalloids are discussed as well. The mechanisms of actions of selected nanoformulations, including systems with magnetic, photothermal or photodynamic effects, are briefly described.

Anti-biofouling efficacy of three home and personal care product preservatives: Pseudomonas aeruginosa biofilm inhibition and prevention

Due to increasing water scarcity, it is essential to determine cost-effective and efficient methods of producing potable water, especially ones that utilize non-traditional sources. Although reverse osmosis (RO) shows promise as a key-player in mitigating water scarcity, it is limited by biofouling. It is therefore integral to identify effective antifoulants that also do not damage the membrane, cause resistance, or negatively impact human health and the environment. Potential antifoulants include preservatives used in home and personal care products. It is hypothesized that safer preservatives can be applied to RO systems to remove or prevent biofouling. Three preservatives including methylisothiazolinone (MIT), phenoxyethanol (PE), and sodium benzoate (SB) were tested via antimicrobial susceptibility tests against P. aeruginosa biofilms grown in 96-well plates to investigate both biofilm prevention and biofilm removal. Data were collected in the form of minimum biofilm inhibitory concentration (MBIC) and minimum biofilm eradication concentration (MBEC), respectively. MIT was the most effective of the three preservatives but also poses the highest hazard to human health and the environment. Due to efficacy and safety concerns, MIT, PE, and SB are not the final solution; however, a process was demonstrated for determining the efficacy of novel, safer antifoulants. Ultimately, further investigations into safer antifoulants, paired with a greater understanding of biofilm removal and prevention doses will help make RO a better solution for water scarcity.