Paddling time parameters and paddling efficiency with the increase in stroke rate in kayaking

Biofeedback-Based Proprioceptive Training to Improve Functional Prerequisites of Dragon Boating in Breast Cancer Survivors

Breast cancer (BC)-related sequelae drastically impact the psychophysical functioning and quality of life of affected women. Adapted physical activity (APA) has proved to effectively counteract these impairments in a non-medicalized framework. In particular, dragon boats are able to promote body functionality, social interaction, and quality of life in BC survivors, but the literature on specific motor gestures is scarce and practice is still based more on a re-educative perspective than a performative one. In this context, the present longitudinal study investigated the benefits of an adapted biofeedback-based sensorimotor training intervention on upper body functionality in a team of dragon ladies. The 8-week intervention was conceived as integrated dry workout sessions led by an APA kinesiologist and applied a novel sensorized proprioceptive device, such as a Libra board. Post-protocol evaluation revealed a significant improvement in bilateral upper limb mobility, core endurance, and trunk stability along with a distress decrease and quality of life enhancement through validated assessment tools. Our findings suggest that integrating biofeedback-based workout sessions can effectively promote upper body functionality in BC survivors practicing dragon boating. Furthermore, our innovative approach could help spread methodological hints able to boost exercise adherence in this target population, thus counteracting cancer recurrence while promoting overall well-being.

Development of a video camera-type kayak motion capture system to measure water kayaking

Background

In kayaking, trunk motion is one of the important factors that prevent injury and improve performance. Kinematic studies in kayaking have been reported in laboratory settings using paddling simulators and ergometers. However, such studies do not reflect kayaking on water, the actual competitive environment. Therefore, we developed a video camera-type kayak motion capture system (KMCS) wherein action cameras were fixed to a kayak to capture images of markers attached to an athlete's body. This study aimed to compare the kinematic data between KMCS and an optical motion capture system (OMCS) in kayaking and to determine the accuracy of the KMCS analysis.

Methods

In a competition, five elite junior female kayak athletes performed kayak paddling under the unloaded condition using a kayak. The kayak was secured using a tri-folding bench and a towel, and twenty strokes were recorded during maximal paddling. One stroke was defined as the period from right catch to left catch, and the first six strokes were used to evaluate the accuracy. Trunk angles (tilting, turning, and rotation) were examined with the simultaneous use of KMCS and OMCS, and the differences between these systems were evaluated. To ensure reliability, intraclass correlation coefficient (ICC; a two-way mixed model for absolute agreement) was calculated for each angle. Furthermore, Bland-Altman analysis was performed to understand the agreement between the two systems.

Results

Root mean square errors (RMSEs) were 1.42° and 3.94° for turning and rotation, respectively, and mean absolute errors (MAEs) were 1.08° and 3.00° for turning and rotation, respectively. The RMSE and MAE for tilting were 2.43° and 1.76°, respectively, which indicated that the validity was comparable to that of other angles. However, the range of motion in tilting was lower than that in turning and rotation. Bland-Altman analysis showed good agreement in the total range of motion, with mean bias values of -0.84°, -0.07°, and -0.41° for tilting, turning, and rotation, respectively. The ICCs for tilting, turning, and rotation were 0.966, 0.985, and 0.973, respectively, and showed excellent reliability.

Conclusions

The newly developed KMCS effectively measured the trunk motion with good accuracy in kayaking. In future studies, we intend to use KMCS to measure kayaking on water and collect data for performance improvement and injury prevention.

Design and Experimental Research of 3-RRS Parallel Ankle Rehabilitation Robot

The ankle is a crucial joint that supports the human body weight. An ankle sprain will adversely affect the patient’s daily life, so it is of great significance to ensure its strength. To help patients with ankle dysfunction to carry out effective rehabilitation training, the bone structure and motion mechanism of the ankle were analyzed in this paper. Referring to the configuration of the lower-mobility parallel mechanism, a 3-RRS (R and S denote revolute and spherical joint respectively) parallel ankle rehabilitation robot (PARR) was proposed. The robot can realize both single and compound ankle rehabilitation training. The structure of the robot was introduced, and the kinematics model was established. The freedom of movement of the robot was analyzed using the screw theory, and the robot kinematics were analyzed using spherical analytics theory. A circular composite rehabilitation trajectory was planned, and the accuracy of the kinematics model was verified by virtual prototype simulation. The Multibody simulation results show that the trajectory of the target point is basically the same as the expected trajectory. The maximum trajectory error is about 2.5 mm in the simulation process, which is within the controllable range. The experimental results of the virtual prototype simulation show that the maximum angular deflection error of the three motors is 2° when running a circular trajectory, which meets the experimental requirements. Finally, a control strategy for passive rehabilitation training was designed, and the effectiveness of this control strategy was verified by a prototype experiment.

The Effect of Paddle Stroke Variables Measured by Trainesense SmartPaddle® on the Velocity of the Kayak

(1) Background: This study aimed to compare key variables of paddle stroke measured by a commercial Trainesense SmartPaddle^® against the strain-gauge shaft and investigate how these variables are associated with the velocity of the boat among national-level canoe polo players. (2) Methods: This study involved 14 Finnish national-level canoe polo players. The measurement protocol consisted of three different paddling velocities, which were performed in indoor swimming pools. The velocity of the boat was calculated based on the performance time measured with the laser photocell gate. Canoe polo equipment was used in the study and a SmartPaddle sensor was attached to the paddle blade. A strain-gauge paddle shaft was used as a reference method to examine the validity of SmartPaddle. (3) Results: The stroke rate, force production time, mean and maximal force measured with the strain-gauge paddle shaft correlated strongly (r = 0.84–0.95, p < 0.01) with SmartPaddle. However, the SmartPaddle overestimated the maximum force compared to the strain-gauge shaft. Stroke rate (r = 0.86, p < 0.01), mean force (r = 0.79, p < 0.01), maximal force (r = 0.78, p < 0.01) and total absolute impulse (r = 0.70, p < 0.01) correlated positively and force production time negatively (r = −0.76, p < 0.01) with the velocity of the boat. (4) Conclusions: We conclude that the SmartPaddle provides promising information on stroke key variables when compared to the strain-gauge paddle shaft. The SmartPaddle is a new and interesting tool for biomechanical research and daily kayaking coaching in real open water conditions. However, more research and algorithm development are needed before the SmartPaddle can be used in everyday coaching sessions in kayaking.

Validation of a global positioning system with accelerometer for canoe/kayak sprint kinematic analysis

This study aimed to validate the use of a Global Positioning System with an accelerometer (GPS-Acc) unit to quantify canoeing kinematic variables. Eight canoe and kayak (200 and 500 m) sprint races were analysed. All the races were recorded sideways by a digital camera that followed the kayak or canoe bow and simultaneously using a GPS-Acc unit recorded the data concerning boat position, velocity, and acceleration. In 200 m races, 50 m splits were established over the entire race distance. In 500 m races, 100 m splits were used, excepting the race start and end, where the splits were divided into two sections of 50 m. The data of the GPS-Acc unit were analysed using a self-developed routine. The agreement between the video and the GPS-Acc analysis was measured regarding all the variables by a Bland-Altman analysis. No differences were found between both methodologies, except for time and velocity at the first 50 m, suggesting thus an agreement between the analysis methods. The GPS-Acc unit is valid for measuring quickly and accurately kinematic variables, mainly boat velocity and stroke rate. However, video analyses may be necessary when a more detailed analysis of the paddling technique is of interest.

Relationships between physical characteristics and biomechanics of lower extremity during the squat

Background/objective

There is a lack of information about relationship between physical characteristics and biomechanics of the lower extremity during the squat. Additionally, studies did not examine sex-related differences. The purpose of this study was to investigate relationships between physical characteristics and biomechanics of the lower extremity during the squat, and to determine if any sex differences are present.

Methods

Fifty three participants recruited (21.82 ± 2.3 years; 75.56 ± 14.98 kg; 171.57 ± 8.38 cm) performed three squats with 75% of one repetition maximum. Femur to tibia length ratio, hip and ankle joints' flexibilities, and relative muscular strength were measured and used as physical characteristics. Net joint torques (NJT) and flexion angles of the lower extremity were extracted as dependent variables. Multiple regression (stepwise) analysis was conducted to examine the relationships with physical characteristics being factors. Pearson correlation coefficients were calculated to determine intercorrelations among the dependent variables.

Results

Relative muscular strength was related to hip NJT and knee flexion angle, and hip flexibility was related to ankle dorsiflexion. Hip and knee NJT showed moderate correlations with the corresponding flexion angles (r = 0.48-0.53; p < .01). Ankle dorsiflexion angle showed weak to moderate correlations with hip NJT and hip flexion angle (r = -0.36-0.50; p < .01) and a moderate correlation with knee NJT. No significant sex difference was observed (r = 0.52; p < .05).

Conclusion

Biomechanics of the lower extremity has been shown to correlate more with relative muscular strength and joint flexibility than with leg length ratio.

Pacing strategies and relationships between speed and stroke parameters for elite sprint kayakers in single boats

The study aimed to determine the pacing strategies of elite single-boat sprint kayakers, as well as the relationships between stroke parameters (stroke rate (SR) and stroke length (SL)) and kayak speed throughout the race. High-resolution split speed and stroke parameter data from men's (MK1) and women's (WK1) single-boat A- and B-finals in 2016-2017 international sprint kayak competitions were analysed. Correlation coefficients were calculated between SR-speed and SL-speed during each split for each race group. Athletes followed all-out, positive and seahorse-shaped pacing strategies for the 200 m, 500 m and 1000 m races, respectively. SL-speed had greater correlations during the first half of the MK1 200 m race, whereas SR-speed had greater correlations during the second half. SR-speed correlations were greater than SL-speed correlations throughout the final 150 m of WK1 200 m races. There were large and very large correlations between SR-speed at the end of both the WK1 500 m and MK1 1000 m race distances, respectively, despite following different pacing strategies. Single-boat pacing strategies change due to race distance during major international sprint kayak competitions, whereas the relationships between stroke parameters and speed change depending on athlete sex and the race distance.

Application of Instrumented Paddles in Measuring On-Water Kinetics of Front and Back Paddlers in K2 Sprint Kayaking Crews of Various Ability Levels

This study used instrumented paddles to obtain on-water kinetic variables of two-seater (K2) crews during sprint kayaking. A total of 74 male kayakers of various ability levels (national team: 9, recreational club: 38, school team: 27) comprising 39 K2 crews were recruited. Both the front and back paddlers were provided with an instrumented paddle to perform 200-m maximal effort paddling in a reservoir. Force, power, and temporal variables were extracted from the paddle data. Difference among groups were compared using a factorial Analysis of Variance. Results showed that the force, power, and temporal characteristics of the front and back paddlers were similar during maximal effort sprint kayaking. Proficient kayakers produced greater kinetic outputs than less proficient kayakers, while the coordination strategy based on timing differences at key events between the two crew members in a K2 boat was similar across ability levels. These data can be useful for coaches, sport scientists, and athletes in planning and monitoring the training.

Relationship between Quadriceps Tendon Young's Modulus and Maximum Knee Flexion Angle in the Swing Phase of Gait in Patients with Severe Knee Osteoarthritis

Background and objectives: Decreased knee flexion in the swing phase of gait can be one of the causes of falls in severe knee osteoarthritis (OA). The quadriceps tendon is one of the causes of knee flexion limitation; however, it is unclear whether the stiffness of the quadriceps tendon affects the maximum knee flexion angle in the swing phase. The purpose of this study was to clarify the relationship between quadriceps tendon stiffness and maximum knee flexion angle in the swing phase of gait in patients with severe knee OA. Materials and Methods: This study was conducted from August 2018 to January 2020. Thirty patients with severe knee OA (median age 75.0 (interquartile range 67.5–76.0) years, Kellgren–Lawrence grade: 3 or 4) were evaluated. Quadriceps tendon stiffness was measured using Young’s modulus by ShearWave Elastography. The measurements were taken with the patient in the supine position with the knee bent at 60° in a relaxed state. A three-dimensional motion analysis system measured the maximum knee flexion angle in the swing phase. The measurements were taken at a self-selected gait speed. The motion analysis system also measured gait speed, step length, and cadence. Multiple regression analysis by the stepwise method was performed with maximum knee flexion angle in the swing phase as the dependent variable. Results: Multiple regression analysis identified quadriceps tendon Young’s modulus (standardized partial regression coefficients [β] = −0.410; p = 0.013) and gait speed (β = 0.433; p = 0.009) as independent variables for maximum knee flexion angle in the swing phase (adjusted coefficient of determination = 0.509; p < 0.001). Conclusions: Quadriceps tendon Young’s modulus is a predictor of the maximum knee flexion angle. Clinically, decreasing Young’s modulus may help to increase the maximum knee flexion angle in the swing phase in those with severe knee OA.