Performance measurement via sap flow monitoring of three eucalyptus species for mine site and dryland salinity phytoremediation

Testing of a custom, portable drill press to minimize probe misalignment in sap flow sensors

The accurate estimation of plant transpiration is critical to the fields of hydrology, plant physiology and ecology. Among the various methods of measuring transpiration in the field, the sap flow methods based on head pulses offers a cost-effective and energy-efficient option to directly measure the plant-level movement of water through the hydraulically active tissue. While authors have identified several possible sources of error in these measurements, one of the most common sources is misalignment of the sap flow probes due to user error. Though the effects of probe misalignment are well documented, no device or technique has been universally adopted to ensure the proper installation of sap flow probes. In this paper we compare the magnitude of misalignment errors among a 5 mm thick drilling template (DT), a 10 mm thick DT, and a custom designed, field-portable drill press. The different techniques were evaluated in the laboratory using a 7.5 cm wood block and in the field, comparing differences in measured sap flow. Based on analysis of holes drilled in the wood block, we found that the portable drill press was most effective in assuring that drill holes remained parallel, even at 7.5 cm depth. In field installations, nearly 50% of holes drilled with a 5 mm template needed to be redrilled while none needed to be when drilled with the drill press. Widespread use of a portable drill press when implementing the heat pulse method would minimize alignment uncertainty and allow a clearer understanding of other sources of uncertainty due to variability in tree species, age, or external drivers or transpiration.

Assessing water stress in a high-density apple orchard using trunk circumference variation, sap flow index and stem water potential

Introduction

Automated plant-based measurements of water stress have the potential to advance precision irrigation in orchard crops. Previous studies have shown correlations between sap flow, line variable differential transform (LVDT) dendrometers and fruit tree drought response. Here we report season-long automated measurement of maximum daily change in trunk diameter using band dendrometers and heated needles to measure a simplified sap flow index (SFI).

Methods

Measurements were made on two apple cultivars that were stressed at 7 to 12 day intervals by withholding irrigation until the average stem water potential (ΨStem) dropped below -1.5 MPa, after which irrigation was restored and the drought cycle repeated.

Results

Dendrometer measurements of maximum daily trunk shrinkage (MDS) were highly correlated (r² = 0.85) with pressure chamber measurements of stem water potential. The SFI measurements were less correlated with stem water potential but were highly correlated with evaporative demand (r² = 0.82) as determined by the Penman-Monteith equation (ETr).

Discussion

The high correlation of SFI to ETr suggests that high-density orchards resemble a continuous surface, unlike orchards with widely spaced trees. The correlations of MDS and SFI to ΨStem were higher during the early season than the late season growth. Band dendrometers are less labor intensive to install than LVDT dendrometers and are non-invasive so are well suited to commercialization.

Monitoring of an electrically induced signal in melon in relation to different environmental conditions in a smart farm

A smart farm that automatically regulates environmental conditions such as temperature, humidity and nutrient supply will maximize crop production per unit area by using ICT-based technology. To control the environment in a smart greenhouse, plant growth should be monitored in real time. The physiological activity of a plant was monitored by receiving an electrical signal from inside the plant stem which changed when the plant absorbed nutrients and water. In this study, the environmental conditions in different areas of a smart farm were not much different, and growth parameters were not much affected by the environmental conditions of the area. However, a plant induced electrical signal (PIES) was associated with the atmospheric and media temperature and relative humidity although there was time lag of 6 ~ 7 h for the peaks of the PIES and other environmental conditions. Therefore, monitoring a PIES will make it possible to improve the growth environments in smart farms.

Challenges and advances in measuring sap flow in agriculture and agroforestry: A review with focus on nuclear magnetic resonance

Sap flow measurement is one of the most effective methods for quantifying plant water use.A better understanding of sap flow dynamics can aid in more efficient water and crop management, particularly under unpredictable rainfall patterns and water scarcity resulting from climate change. In addition to detecting infected plants, sap flow measurement helps select plant species that could better cope with hotter and drier conditions. There exist multiple methods to measure sap flow including heat balance, dyes and radiolabeled tracers. Heat sensor-based techniques are the most popular and commercially available to study plant hydraulics, even though most of them are invasive and associated with multiple kinds of errors. Heat-based methods are prone to errors due to misalignment of probes and wounding, despite all the advances in this technology. Among existing methods for measuring sap flow, nuclear magnetic resonance (NMR) is an appropriate non-invasive approach. However, there are challenges associated with applications of NMR to measure sap flow in trees or field crops, such as producing homogeneous magnetic field, bulkiness and poor portable nature of the instruments, and operational complexity. Nonetheless, various advances have been recently made that allow the manufacture of portable NMR tools for measuring sap flow in plants. The basic concept of the portal NMR tool is based on an external magnetic field to measure the sap flow and hence advances in magnet types and magnet arrangements (e.g., C-type, U-type, and Halbach magnets) are critical components of NMR-based sap flow measuring tools. Developing a non-invasive, portable and inexpensive NMR tool that can be easily used under field conditions would significantly improve our ability to monitor vegetation responses to environmental change.

Sap flow of Amorpha fruticosa: implications of water use strategy in a semiarid system with secondary salinization

A. fruticosa (Amorpha fruticosa L.) is widely used for revegetation in semiarid lands that undergo secondary salinization. Understanding A. fruticosa plants response to soil water and salt stress is essential for water irrigation management and proper revegetation practices. In this study, we measured sap flow, stomatal conductance, meteorological and soil characteristics in an A. fruticosa community that recently experienced secondary salinization in northwestern China. Results of our study showed that daytime and nocturnal sap flows averaged 804.37 g·cm^-2·day^-1 and 46.06 g·cm^-2·day^-1, respectively, during the growing season. Within individual days, the highest sap flow appeared around noon local time and followed a similar pattern of photosynthetically active radiation (PAR). Despite the significant effect of meteorological factors on the characteristics of sap flow, our study highlighted that the sap flow of A. fruticosa is strongly regulated by the availability of soil relative extractable water (REW). The daytime sap flow, which is predominant compared to nocturnal sap flow, was strongly affected by PAR, air temperature and vapor-pressure deficit. With water stress in the top 40 cm of the soil (REW_0-40 cm < 0.4), daytime sap flow displayed a strong relationship with soil water content (SWC) (positive) and soil electrical conductivity (EC) (negative) in the relatively shallow soil profile (up to 40 cm). For the nocturnal sap flow, our results suggest that in the absence of soil water stress (REW_0-40 cm > 0.4), the nocturnal sap flow is mainly used to replenish the stem water content and sustain nocturnal transpiration. Under soil water stress, nocturnal sap flow is mainly used to replenish stem water content. The results of our study indicate that it is necessary to shorten the irrigation cycle during the primary growing period (May-July) of A. fruticosa. Moreover, in the absence of soil water stress (REW_0-40 cm > 0.4), A. fruticosa can survive well in an saline environment with soil EC < 5 mS·cm^-1.

The importance of conduction versus convection in heat pulse sap flow methods

Heat pulse methods are a popular approach for estimating sap flow and transpiration. Yet, many methods are unable to resolve the entire heat velocity measurement range observable in plants. Specifically, the Heat Ratio (HRM) and Tmax heat pulse methods can only resolve slow and fast velocities, respectively. The Dual Method Approach (DMA) combines optimal data from HRM and Tmax to output the entire range of heat velocity. However, the transition between slow and fast methods in the DMA currently does not have a theoretical solution. A re-consideration of the conduction/convection equation demonstrated that the HRM equation is equivalent to the Péclet equation which is the ratio of conduction to convection. This study tested the hypothesis that the transition between slow and fast methods occurs when conduction/convection, or the Péclet number, equals one, and the DMA would be improved via the inclusion of this transition value. Sap flux density was estimated via the HRM, Tmax and DMA methods and compared with gravimetric sap flux density measured via a water pressure system on 113 stems from 15 woody angiosperm species. When the Péclet number ≤ 1, the HRM yielded accurate results and the Tmax was out of range. When the Péclet number > 1, the HRM reached a maximum heat velocity at approximately 15 cm hr -1 and was no longer accurate, whereas the Tmax yielded accurate results. The DMA was able to output accurate data for the entire measurement range observed in this study. The linear regression analysis with gravimetric sap flux showed an r2 of 0.541 for HRM, 0.879 for Tmax and 0.940 for DMA. With the inclusion of the Péclet equation, the DMA resolved the entire heat velocity measurement range observed across 15 taxonomically diverse woody species. Consequently, the HRM and Tmax are redundant sap flow methods and have been superseded by the DMA.

The Dual Method Approach (DMA) Resolves Measurement Range Limitations of Heat Pulse Velocity Sap Flow Sensors

Sap flow, the movement of fluid in the xylem of plants, is commonly measured with the heat pulse velocity (Vh) family of methods. The observable range of Vh in plants is ~−10 to ~+270 cm/h. However, most Vh methods only measure a limited portion of this range, which restricts their utility. Previous research attempted to extend the range of Vh methods, yet these approaches were analytically intensive or impractical to implement. The Dual Method Approach (DMA), which is derived from the optimal measurement ranges of two Vh methods, the Tmax and the heat ratio method (HRM), also known as the “slow rates of flow” method (SRFM), is proposed to measure the full range of sap flow observable in plants. The DMA adopts an algorithm to dynamically choose the optimal Vh measurement via the Tmax or HRM/SRFM. The DMA was tested by measuring sap flux density (Js) on Tecoma capensis (Thunb.) Lindl., stems and comparing the results against Js measured gravimetrically. The DMA successfully measured the entire range of Vh observed in the experiment from 0.020 to 168.578 cm/h, whereas the HRM/SRFM range was between 0.020 and 45.063 cm/h, and the Tmax range was between 2.049 cm/h and 168.578 cm/h. A linear regression of DMA Js against gravimetric Js found an R2 of 0.918 and error of 1.2%, whereas the HRM had an R2 of 0.458 and an error of 49.1%, and the Tmax had an R2 of 0.826 and an error of 0.5%. Different methods to calculate sapwood thermal diffusivity (k) were also compared with the kVand method showing better accuracy. This study demonstrates that the DMA can measure the entire range of Vh in plants and improve the accuracy of sap flow measurements.

Phytoremediation efficiency OF CD by Eucalyptus globulus transplanted from polluted and unpolluted sites

The capacity of plants to uptake heavy metals from contaminated soils has shown great phytoremediation potential. The development, resistibility and Cd extraction of Eucalyptus globulus individuals from metalliferous and clean sites in different years were analyzed under a specific environment. Eucalyptus globulus planted in Guiyu for phytoremediation or cultivated in an uncontaminated, natural environment for economic purposes were transplanted to Yuecheng town, which, in recent years, has been involved in the e-waste dismantling and recycling business, to compare the phytoremediation efficiency of Eucalyptus globulus trees grown in different environments. Trees cultivated in polluted areas can remove far more Cd and Hg from the contaminated soil than the individuals from clean soils because metalliferous Eucalyptus globulus can produce more biomass and uptake more heavy metals than nonmetalliferous plants per year. As polluted environments negatively affect the growth of plants, we speculated that the phytoremediation efficiency of metalliferous Eucalyptus globulus should decrease over time and that nonmetalliferous trees should adapt to the local environment.