Biodegradation and Medical Application of Microbial Poly(3-hydroxybutyrate)

Weathering and degradation of polylactic acid masks in a simulated environment in the context of the COVID-19 pandemic and their effects on the growth of winter grazing ryegrass

The COVID-19 pandemic has led to explosive growth in the production and consumption of disposable medical masks, which has caused new global environmental problems due to the improper disposal of these masks and lack of effective mask recycling methods. To reduce the environmental load caused by the inability of synthetic plastics to degrade, polylactic acid (PLA) masks, as a biodegradable environmentally friendly plastic, may become a solution. This study simulated the actual degradation process of new PLA masks in different environments by soaking them in various solutions for 4 weeks and explored the influence of the treated PLA fabric fibers on the growth of winter ryegrass. The results show that the weathering degradation of PLA fibers in water mainly occurs through the hydrolysis of ester bonds, and weathering leads to cheese-like and gully-like erosion on the surface of the PLA fiber fabric layer and finally to fiber fracture and the release of microplastics (MPs). The average number of MPs released within 4 weeks is 149.5 items/piece, the particle size is 20-500 µm (44%), and 63.57% of the MPs are transparent fibers. The outer, middle, and inner layers of weathered PLA masks tend to be hydrophilic and have lower mechanical strength. PLA fibers after different treatment methods affect the growth of winter ryegrass. PLA masks are undoubtedly a greener choice than ordinary commercial masks, but in order to confirm this, the entire degradation process, the final products, and the impact on the environment need to be further studied. In the future, masks may be developed to be made from more environmentally friendly biodegradable materials that can have good protecting effects and also solve the problem of end-of-life recycling. A SYNOPSIS: Simulation of the actual degradation process of PLA masks and exploration of the influence of mask degradation on the growth of winter ryegrass.

Recent Development of Polyhydroxyalkanoates (PHA)-Based Materials for Antibacterial Applications: A Review

The diseases caused by microorganisms are innumerable existing on this planet. Nevertheless, increasing antimicrobial resistance has become an urgent global challenge. Thus, in recent decades, bactericidal materials have been considered promising candidates to combat bacterial pathogens. Recently, polyhydroxyalkanoates (PHAs) have been used as green and biodegradable materials in various promising alternative applications, especially in healthcare for antiviral or antiviral purposes. However, it lacks a systematic review of the recent application of this emerging material for antibacterial applications. Therefore, the ultimate goal of this review is to provide a critical review of the state of the art recent development of PHA biopolymers in terms of cutting-edge production technologies as well as promising application fields. In addition, special attention was given to collecting scientific information on antibacterial agents that can potentially be incorporated into PHA materials for biological and durable antimicrobial protection. Furthermore, the current research gaps are declared, and future research perspectives are proposed to better understand the properties of these biopolymers as well as their possible applications.

Effect of poly(3-hydroxyalkanoates) as natural polymers on mesenchymal stem cells

Mesenchymal stem cells (MSCs) are stromal multipotent stem cells that can differentiate into multiple cell types, including fibroblasts, osteoblasts, chondrocytes, adipocytes, and myoblasts, thus allowing them to contribute to the regeneration of various tissues, especially bone tissue. MSCs are now considered one of the most promising cell types in the field of tissue engineering. Traditional petri dish-based culture of MSCs generate heterogeneity, which leads to inconsistent efficacy of MSC applications. Biodegradable and biocompatible polymers, poly(3-hydroxyalkanoates) (PHAs), are actively used for the manufacture of scaffolds that serve as carriers for MSC growth. The growth and differentiation of MSCs grown on PHA scaffolds depend on the physicochemical properties of the polymers, the 3D and surface microstructure of the scaffolds, and the biological activity of PHAs, which was discovered in a series of investigations. The mechanisms of the biological activity of PHAs in relation to MSCs remain insufficiently studied. We suggest that this effect on MSCs could be associated with the natural properties of bacteria-derived PHAs, especially the most widespread representative poly(3-hydroxybutyrate) (PHB). This biopolymer is present in the bacteria of mammalian microbiota, whereas endogenous poly(3-hydroxybutyrate) is found in mammalian tissues. The possible association of PHA effects on MSCs with various biological functions of poly(3-hydroxybutyrate) in bacteria and eukaryotes, including in humans, is discussed in this paper.

In vitro degradation of a unique porous PHBV scaffold manufactured using selective laser sintering

Biodegradable poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) scaffolds have shown great promise for bone tissue engineering applications. The investigation of their hydrolytic degradation is thus essential to understand the effect of hydrolysis on the complex biodegradation behavior of PHBV scaffolds. In this study, we investigated the degradation behavior of high molecular weight PHBV scaffolds manufactured using selective laser sintering (SLS) without using predesigned porous architectures. The manufactured scaffolds have high specific surface areas with great water-uptake abilities. After an incubation of 6 weeks in phosphate-buffered saline solution, the structural integrity of the scaffolds was unaffected. However, a significant decrease in molecular weight ranging from 39% to 46% was found. The measured weight loss was negligible, but their compressive modulus and strength both decreased, likely due to water plasticization. These findings suggest that hydrolytic degradation of PHBV by means of bulk degradation was the predominant mechanism, attributed to their excellent water absorptivity. Overall, the PHBV scaffolds manufactured using SLS exhibited adequate mechanical properties and satisfactory structural integrity after incubation. As a result, the scaffolds have great potential as candidates for bone repair in clinical practice. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 154-162, 2019.

Poly(3-hydroxybutyrate)/poly(ethylene glycol) scaffolds with different microstructure: the effect on growth of mesenchymal stem cells

Development of biocompatible 3D scaffolds is one of the most important challenges in tissue engineering. In this study, we developed polymer scaffolds of different design and microstructure to study cell growth in them. To obtain scaffolds of various microstructure, e.g., size of pores, we used double- and one-stage leaching methods using porogens with selected size of crystals. A composite of poly(3-hydroxybutyrate) (PHB) with poly(ethylene glycol) (PEG) (PHB/PEG) was used as polymer biomaterial for scaffolds. The morphology of scaffolds was analyzed by scanning electron microscopy; the Young modulus of scaffolds was measured by rheometry. The ability to support growth of mesenchymal stem cells (MSCs) in scaffolds was studied using the XTT assay; the phenotype of MSC was preliminarily confirmed by flow cytometry and the activity of alkaline phosphatase and expression level of CD45 marker was studied to test possible MSC osteogenic differentiation. The obtained scaffolds had different microstructure: the scaffolds with uniform pore size of about 125 µm (normal pores) and 45 µm (small pores) and scaffolds with broadly distributed pores size from about 50-100 µm. It was shown that PHB/PEG scaffolds with uniform pores of normal size did not support MSCs growth probably due to their marked spontaneous osteogenic differentiation in these scaffolds, whereas PHB/PEG scaffolds with diverse pore size promoted stem cells growth that was not accompanied by pronounced differentiation. In scaffolds with small pores (about 45 µm), the growth of MSC was the lowest and cell growth suppression was only partially related to stem cells differentiation. Thus, apparently, the broadly distributed pore size of PHB/PEG scaffolds promoted MSC growth in them, whereas uniform size of scaffold pores stimulated MSC osteogenic differentiation.

Characterization and Evaluation of Controlled Antimicrobial Release from Petrochemical (PU) and Biodegradable (PHB) Packaging

The academic exploration and technology design of active packaging are coherently supplying innovative approaches for enhancing the quality and safety of food, as well as prolonging their shelf-life. With the object of comparison between two barrier materials, such as stable petrochemical polyurethane (PU), (BASF), and biodegradable natural poly(3-hydroxybutyrate) (PHB), (Biomer Co., Krailling, Germany), the study of antibacterial agent release has been performed. For the characterization of polymer surface morphology and crystallinity, the scanning electron microscopy (SEM), atomic force microscopy (AFM) and differential scanning calorimetry (DSC) were used respectively. The antimicrobial activity of chlorhexidine digluconate (CHD) has been estimated by the Bauer⁻Kirby Disk Diffusion Test. It was shown that the kinetic release profiles of CHD, as the active agent, in both polymers, significantly differed due to the superposition of diffusion and surface degradation in poly(3-hydroxybutyrate) (PHB). To emphasize the special transport phenomena in polymer packaging, the diffusivity modeling was performed and the CHD diffusion coefficients for the plane films of PU and PHB were further compared. The benefit of active biodegradable packaging on the base of PHB is discussed.

Histological and molecular-biological analyses of poly(3-hydroxybutyrate) (PHB) patches for enhancement of bone regeneration

Tissue engineered cell-seeded constructs with poly(3)hydroxybutyrate (PHB) induced ectopic bone formation after implantation into the back muscle of rats. The objective of our in vivo study was to evaluate the osteogenic potential of pure PHB patches in surgically created cranial defects. For this, PHB patches were analyzed after implantation in surgically created defects on the cranium of adult male rats. After healing periods of 4, 8 and 12 weeks, the bone tissue specimens containing PHB patches were processed and analyzed histologically as well as molecular-biologically. After 4 weeks, the PHB patches were completely embedded in connective tissue. Eight weeks after PHB insertion, bone regeneration proceeding from bearing bone was found in 50% of all treated animals, whereas all PHB treated cavities showed both bone formation and embedding of the patches in bone 12 weeks after surgery. Furthermore, all slices showed pronounced development of blood vessels. Histomorphometric analysis presented a regenerated bone mean value between 46.4 ± 16.1% and 54.2 ± 19.3% after 4-12 weeks of healing. Caveolin-1 staining in capillary-like structures showed a 1.16-1.38 fold increased expression in PHB treated defects compared to controls. Real-time RT-PCR analyses showed significantly lower expressions of Alpl, Col1a1 and VEGFA in cranium defects after treatment with PHB patches compared to untreated bony defects of the same cranium. Within the limits of the presented animal investigation, it could conclude that the tested PHB patches featured a good biocompatibility and an osteoconductive character.