Recent advances in slow and sustained drug release for retina drug delivery

Excipients in drug delivery systems: A comprehensive review of approved inactive ingredients for human ophthalmic formulations

Pharmaceutical excipients, commonly known as inactive ingredients, encompass any substance aside from the active ingredient that fulfills a distinct and vital role in a formulation. Their purpose is to enhance specific characteristics, whether associated with the performance of the formulation or aspects related to patient comfort, safety, and acceptability. Because of the limited toxicity studies provided, and the several allergic and toxic side effects that have been reported throughout the years, it is not trivial for the regulatory agencies to approve inactive ingredients for human use. In general, excipients are approved within good manufacturing practices (GMPs) when they undergo analysis of the formulation as a whole, not the standalone substance. However, there is a lack of updated information regarding this subject, given that only the American Food and Drug Administration (FDA) provides a complete list describing the inactive ingredients that are currently approved in drug products for human use. Here, we aimed to provide an overview of key excipients approved by the FDA for ophthalmic use in humans, focusing on their functional roles in ophthalmic formulations, particularly eye drops, and the regulatory requirements involved in these ingredients approval.

Refillable Drug Reservoirs for Retinal Vascular Diseases

PURPOSE

Most patients with retinal vascular disease require chronic, regular treatments to maximize visual potential. This places a challenging burden on the patient and is one reason why real-world visual outcomes often lag the results seen in clinical trials.

REVIEW

Sustained drug delivery devices have long been considered one way to alleviate this difficulty. In particular, devices with refillable reservoirs aim to take advantage of existing drugs to improve their pharmacokinetics and reduce treatment frequency. Very few devices utilizing a refillable reservoir have reached human clinical trials, however. Only one, the Port Delivery System (PDS) with ranibizumab, has received FDA approval. Despite this milestone, the PDS was voluntarily withdrawn one year after its introduction due to product quality challenges related to the septum of the device. The PDS was recently returned to the market following modifications to the implant as well as the refill-exchange needle.

CONCLUSION

Although devices with refillable reservoirs have increased challenges related to their inherent complexity, the potential for improved patient outcomes merit further development of this technology.

Future Nanotechnology-Based Strategies for Improved Management of Helicobacter pylori Infection

Helicobacter pylori (H. pylori) is a recalcitrant pathogen, which can cause gastric disorders. During the past decades, polypharmacy-based regimens, such as triple and quadruple therapies have been widely used against H. pylori. However, polyantibiotic therapies can disturb the host gastric/gut microbiota and lead to antibiotic resistance. Thus, simpler but more effective approaches should be developed. Here, some recent advances in nanostructured drug delivery systems to treat H. pylori infection are summarized. Also, for the first time, a drug release paradigm is proposed to prevent H. pylori antibiotic resistance along with an IVIVC model in order to connect the drug release profile with a reduction in bacterial colony counts. Then, local delivery systems including mucoadhesive, mucopenetrating, and cytoadhesive nanobiomaterials are discussed in the battle against H. pylori infection. Afterward, engineered delivery platforms including polymer-coated nanoemulsions and polymer-coated nanoliposomes are poposed. These bioinspired platforms can contain an antimicrobial agent enclosed within smart multifunctional nanoformulations. These bioplatforms can prevent the development of antibiotic resistance, as well as specifically killing H. pylori with no or only slight negative effects on the host gastrointestinal microbiota. Finally, the essential checkpoints that should be passed to confirm the potential effectiveness of anti-H. pylori nanosystems are discussed.

Implantable sustained-release drug delivery systems: a revolution for ocular therapeutics

PURPOSE

Due to the inimitable anatomical structure of the eyeball and various physiological barriers, conventional ocular local administration is often complicated by apparent shortcomings, such as limited bioavailability and short drug retention. Thus, developing methods for sustainable, safe and efficient drug delivery to ocular target sites has long been an urgent need. This study briefly summarizes the barriers to ocular drug administration and various ocular drug delivery routes and highlights recent progress in ocular implantable sustained-release drug delivery systems (DDSs) to provide literature evidence for developing novel ocular implants for sustained drug delivery.

METHODS

We conducted a comprehensive search of studies on ocular implantable sustained-release DDSs in PubMed and Web of Science using the following keywords: ocular, implantable and drug delivery system. More than 400 papers were extracted. Publications focused on sustained and controlled drug release were primarily considered. Experimental articles involving DDSs that cannot be implanted into the eye through surgeries and cannot be inserted into ocular tissues in solid form were excluded. Approximately 143 publications were reviewed to summarize the most current information on the subject.

RESULTS

In recent years, numerous ocular sustained-release DDSs using lipids, nanoparticles and hydrogels as carriers have emerged. With unique properties and systematic design, ocular implantable sustained-release DDSs are able to continuously maintain drug release, effectively sustain the therapeutic concentration in target tissues, and substantially enhance the therapeutic efficacy. Nevertheless, few ocular implantable sustained-release DDSs have been available in clinical use.

CONCLUSIONS

Ocular implantable sustained-release DDSs have become a new focus in the field of ocular drug development through unique designs and improvements in the materials of drug carriers, administration methods and dosage forms. With more ocular implantable sustained-release DDSs being commercialized, ocular therapeutics may be revolutionized.

The Use of Polymer Blends in the Treatment of Ocular Diseases

The eye is an organ with limited drug access due to its anatomical and physiological barriers, and the usual forms of ocular administration are limited in terms of drug penetration, residence time, and bioavailability, as well as low patient compliance. Hence, therapeutic innovations in new drug delivery systems (DDS) have been widely explored since they show numerous advantages over conventional methods, besides delivering the content to the eye without interfering with its normal functioning. Polymers are usually used in DDS and many of them are applicable to ophthalmic use, especially biodegradable ones. Even so, it can be a hard task to find a singular polymer with all the desirable properties to deliver the best performance, and combining two or more polymers in a blend has proven to be more convenient, efficient, and cost-effective. This review was carried out to assess the use of polymer blends as DDS. The search conducted in the databases of Pubmed and Scopus for specific terms revealed that although the physical combination of polymers is largely applied, the term polymer blend still has low compliance.

Synthesis and Characterization of Novel Succinyl Chitosan-Dexamethasone Conjugates for Potential Intravitreal Dexamethasone Delivery

The development of intravitreal glucocorticoid delivery systems is a current global challenge for the treatment of inflammatory diseases of the posterior segment of the eye. The main advantages of these systems are that they can overcome anatomical and physiological ophthalmic barriers and increase local bioavailability while prolonging and controlling drug release over several months to improve the safety and effectiveness of glucocorticoid therapy. One approach to the development of optimal delivery systems for intravitreal injections is the conjugation of low-molecular-weight drugs with natural polymers to prevent their rapid elimination and provide targeted and controlled release. This study focuses on the development of a procedure for a two-step synthesis of dexamethasone (DEX) conjugates based on the natural polysaccharide chitosan (CS). We first used carbodiimide chemistry to conjugate DEX to CS via a succinyl linker, and we then modified the obtained systems with succinic anhydride to impart a negative ζ-potential to the polymer particle surface. The resulting polysaccharide carriers had a degree of substitution with DEX moieties of 2–4%, a DEX content of 50–85 μg/mg, and a degree of succinylation of 64–68%. The size of the obtained particles was 400–1100 nm, and the ζ-potential was −30 to −33 mV. In vitro release studies at pH 7.4 showed slow hydrolysis of the amide and ester bonds in the synthesized systems, with a total release of 8–10% for both DEX and succinyl dexamethasone (SucDEX) after 1 month. The developed conjugates showed a significant anti-inflammatory effect in TNFα-induced and LPS-induced inflammation models, suppressing CD54 expression in THP-1 cells by 2- and 4-fold, respectively. Thus, these novel succinyl chitosan-dexamethasone (SucCS-DEX) conjugates are promising ophthalmic carriers for intravitreal delivery.

Long-lasting in situ forming Implant loaded with Bupivacaine: Investigation on the Polymeric and Non-polymeric Carrier and Solvent Effect

INTRODUCTION

Typically, in situ forming implants utilize Poly (lactide-co-glycolide) (PLGA) as a carrier and N-methyl-2-pyrrolidone (NMP) as a solvent. However, it is essential to develop different carriers to release various drugs in a controlled and sustained manner with economic and safety considerations.

OBJECTIVE

The present study aims to evaluate the in-vitro release of Bupivacaine HCl from in situ forming systems as post-operative local anesthesia.

METHODS

We used Sucrose acetate isobutyrate (SAIB), PLGA 50:50, and a mixture of them as carriers to compare the release behavior. Besides, the effect of PLGA molecular weight (RG 502H, RG 503H, and RG 504H), solvent type, and solvent concentration on the drug release profile was evaluated. The formulations were characterized by investigating their in-vitro drug release, rheological properties, solubility, and DSC, in addition to their morphological properties. Furthermore, the Korsmeyer-Peppas and Weibull models were applied to the experimental data. The results revealed that a mixture of SAIB and PLGA compared to using them solely can extend the Bupivacaine HCl release from 3 days to two weeks.

RESULTS

The DSC results demonstrated the compatibility of the mixture by showing a single Tg. The formulation with NMP had a higher burst release and final release in comparison with other solvents by 30% and 96%, respectively. Increasing the solvent concentration from 12% to 32% raised the drug release significantly, which confirmed the larger porosity in the morphology results. From the Korsmeyer-Peppas model, the mechanism of drug release is predicted to be non-Fickian diffusion.

Age-related ocular conditions: Current treatments and role of cyclodextrin-based nanotherapies

Age-related eye disorders are chronic diseases that affect millions of people worldwide. They cause visual impairment and, in some cases, irreversible blindness. Drug targeting to the retina is still a challenge due to the difficulties with drug distribution, crossing eye barriers, and reaching intraocular tissues in an effective therapeutic concentration. Although intravitreal injections can directly deliver drugs to the posterior segment of the eye, it remains an invasive technique and leads to several side effects. Conventional formulations such as emulsions, suspensions, or ointments have been related to frequent instillation and inability to reach intraocular tissues. New drug delivery systems and medical devices have also been designed. Nevertheless, these treatments are not always effective and sometimes require the presence of a specialist for the administration of the dose. Therefore, treatments for age-related ocular diseases remain as one of the major unmet clinical needs to manage these widespread eye conditions. Nanotechnology may become the adequate tool for developing effective and non-invasive therapies suitable for self-administration. In this review, we discuss emerging therapeutic options based on nanoengineering of cyclodextrin nanocarriers for the treatment of age-related eye disorders, including their pathophysiology, pharmacological options, and feasibility of clinical translation.

Dexamethasone Conjugates: Synthetic Approaches and Medical Prospects

Dexamethasone (DEX) is the most commonly prescribed glucocorticoid (GC) and has a wide spectrum of pharmacological activity. However, steroid drugs like DEX can have severe side effects on non-target organs. One strategy to reduce these side effects is to develop targeted systems with the controlled release by conjugation to polymeric carriers. This review describes the methods available for the synthesis of DEX conjugates (carbodiimide chemistry, solid-phase synthesis, reversible addition fragmentation-chain transfer [RAFT] polymerization, click reactions, and 2-iminothiolane chemistry) and perspectives for their medical application as GC drug or gene delivery systems for anti-tumor therapy. Additionally, the review focuses on the development of DEX conjugates with different physical-chemical properties as successful delivery systems in the target organs such as eye, joint, kidney, and others. Finally, polymer conjugates with improved transfection activity in which DEX is used as a vector for gene delivery in the cell nucleus have been described.

Dual-acting therapeutic proteins for intraocular use

Intravitreally injected antibody-based medicines have revolutionised the treatment of retinal disease. Bispecific and dual-functional antibodies and therapeutic proteins have the potential to further increase the efficacy of intraocular medicines.

Injectable in-situ gel depot system for targeted delivery of biologics to the retina

In current clinical settings, frequent intravitreal (IVT) injections of anti-vascular endothelial growth factors are used due to their short in-vivo half-life and rapid clearance from the back of the eye. The IVT injections are associated with pain, risk of infection, retinal detachment, and financial burden. Biologics molecules can undergo physical, chemical, and enzymatic degradation during formulation development and in the biological environment. Moreover, the complex ocular structures also act as a rate-limiting barrier for these biologics. Thus, delivering stable and clinically relevant biologics concentration to the back of the eye is still a challenge. Compare to other drug delivery platforms, injectable in-situ gelling depot systems (IISGDs) have emerged as an effective system for biologics delivery. In this review, we have discussed various biologics used in ocular therapeutics and their associated challenges. Different routes of delivery and associated tissue barriers are also discussed. Different types of IISGDs developed to date for biologics delivery to the back of the eye were also covered. To conclude, various critical parameters related to the formulation development process and injectable depot systems that need careful consideration and further investigations were highlighted.

Efficacy and safety of Suprachoroidal Triamcinolone Acetonide in cases of resistant diabetic Macular Edema

Objective

To evaluate the safety and efficacy of Suprachoroidal Triamcinolone Acetonide (SCTA) injection in patients with treatment resistant Diabetic Macular Edema (DME).

Methods

This was a prospective non randomized interventional study conducted in the vitreoretinal department of Al Ehsan Welfare Eye Hospital, Lahore, Pakistan from March 2018 to September 2018. A total of 24 eyes of 24 patients were included. Baseline Best Corrected Visual Acuity (BCVA), Intra Ocular Pressure (IOP) and Central Subfield Thickness (CST) was recorded. After SCTA, patient was followed up at one and three months and same clinical parameters were recorded again and results analyzed.

Results

Out of 24 patients, 11(45.83%) were males and 13(54.16%) were females. Mean pre injection CST was 636.5 ± 200.11 um. Mean pre injection BCVA was 0.8 ± 0.24 on ETDRS chart. Mean post injection CST at one and three months was 304.54 ± 67.43 and 302.66 ± 66.93 um. Mean post injection BCVA at one and three months was 0.47 ± 0.3 and 0.45 ± 0.27 on ETDRS chart. The results were statistically significant for pre and post injection CST at both one and three months (p-value < 0.00001). Pre and post injection BCVA was also statistically significant (p-value < 0.05).

Conclusion

Preliminary evidence suggests that SCTA is well tolerated and may help in improving functional and structural outcomes of treatment resistant DME.