28-Day inhalation toxicity study with evaluation of lung deposition and retention of tangled multi-walled carbon nanotubes

Analysis of carbon nanotube levels in organic matter: an inter-laboratory comparison to determine best practice

Carbon nanotubes (CNTs) are increasingly being used in industrial applications, but their toxicological data in animals and humans are still sparse. To assess the toxicological dose-response of CNTs and to evaluate their pulmonary biopersistence, their quantification in tissues, especially lungs, is crucial. There are currently no reference methods or reference materials for low levels of CNTs in organic matter. Among existing analytical methods, few have been fully and properly validated. To remedy this, we undertook an inter-laboratory comparison on samples of freeze-dried pig lung, ground and doped with CNTs. Eight laboratories were enrolled to analyze 3 types of CNTs at 2 concentration levels each in this organic matrix. Associated with the different analysis techniques used (specific to each laboratory), sample preparation may or may not have involved prior digestion of the matrix, depending on the analysis technique and the material being analyzed. Overall, even challenging, laboratories' ability to quantify CNT levels in organic matter is demonstrated. However, CNT quantification is often overestimated. Trueness analysis identified effective methods, but systematic errors persisted for some. Choosing the assigned value proved complex. Indirect analysis methods, despite added steps, outperform direct methods. The study emphasizes the need for reference materials, enhanced precision, and organized comparisons.

Recent Updates on Multifunctional Nanomaterials as Antipathogens in Humans and Livestock: Classification, Application, Mode of Action, and Challenges

Pathogens cause infections and millions of deaths globally, while antipathogens are drugs or treatments designed to combat them. To date, multifunctional nanomaterials (NMs), such as organic, inorganic, and nanocomposites, have attracted significant attention by transforming antipathogen livelihoods. They are very small in size so can quickly pass through the walls of bacterial, fungal, or parasitic cells and viral particles to perform their antipathogenic activity. They are more reactive and have a high band gap, making them more effective than traditional medications. Moreover, due to some pathogen's resistance to currently available medications, the antipathogen performance of NMs is becoming crucial. Additionally, due to their prospective properties and administration methods, NMs are eventually chosen for cutting-edge applications and therapies, including drug administration and diagnostic tools for antipathogens. Herein, NMs have significant characteristics that can facilitate identifying and eliminating pathogens in real-time. This mini-review analyzes multifunctional NMs as antimicrobial tools and investigates their mode of action. We also discussed the challenges that need to be solved for the utilization of NMs as antipathogens.

Oxidative Stress in Long-Term Exposure to Multi-Walled Carbon Nanotubes in Male Rats

Multi-walled carbon nanotubes (MWCNTs) serve as nanoparticles due to their size, and for that reason, when in contact with the biological system, they can have toxic effects. One of the main mechanisms responsible for nanotoxicity is oxidative stress resulting from the production of intracellular reactive oxygen species (ROS). Therefore, oxidative stress biomarkers are important tools for assessing MWCNTs toxicity. The aim of this study was to evaluate the oxidative stress of multi-walled carbon nanotubes in male rats. Our animal model studies of MWCNTs (diameter ~15-30 nm, length ~15-20 μm) include measurement of oxidative stress parameters in the body fluid and tissues of animals after long-term exposure. Rattus Norvegicus/Wistar male rats were administrated a single injection to the knee joint at three concentrations: 0.03 mg/mL, 0.25 mg/mL, and 0.5 mg/mL. The rats were euthanized 12 and 18 months post-exposure by drawing blood from the heart, and their liver and kidney tissues were removed. To evaluate toxicity, the enzymatic activity of total protein (TP), reduced glutathione (GSH), glutathione S-transferase (GST), thiobarbituric acid reactive substances (TBARS), Trolox equivalent antioxidant capacity (TEAC), nitric oxide (NO), and catalase (CAT) was measured and histopathological examination was conducted. Results in rat livers showed that TEAC level was decreased in rats receiving nanotubes at higher concentrations. Results in kidneys report that the level of NO showed higher concentration after long exposure, and results in animal serums showed lower levels of GSH in rats exposed to nanotubes at higher concentrations. The 18-month exposure also resulted in a statistically significant increase in GST activity in the group of rats exposed to nanotubes at higher concentrations compared to animals receiving MWCNTs at lower concentrations and compared to the control group. Therefore, an analysis of oxidative stress parameters can be a key indicator of the toxic potential of multi-walled carbon nanotubes.

Assessment of Pristine Carbon Nanotubes Toxicity in Rodent Models

Carbon nanotubes are increasingly used in nanomedicine and material chemistry research, mostly because of their small size over a large surface area. Due to their properties, they are very attractive candidates for use in medicine and as drug carriers, contrast agents, biological platforms, and so forth. Carbon nanotubes (CNTs) may affect many organs, directly or indirectly, so there is a need for toxic effects evaluation. The main mechanisms of toxicity include oxidative stress, inflammation, the ability to damage DNA and cell membrane, as well as necrosis and apoptosis. The research concerning CNTs focuses on different animal models, functionalization, ways of administration, concentrations, times of exposure, and a variety of properties, which have a significant effect on toxicity. The impact of pristine CNTs on toxicity in rodent models is being increasingly studied. However, it is immensely difficult to compare obtained results since there are no standardized tests. This review summarizes the toxicity issues of pristine CNTs in rodent models, as they are often the preferred model for human disease studies, in different organ systems, while considering the various factors that affect them. Regardless, the results showed that the majority of toxicological studies using rodent models revealed some toxic effects. Even with different properties, carbon nanotubes were able to generate inflammation, fibrosis, or biochemical changes in different organs. The problem is that there are only a small amount of long-term toxicity studies, which makes it impossible to obtain a good understanding of later effects. This article will give a greater overview of the situation on toxicity in many organs. It will allow researchers to look at the toxicity of carbon nanotubes in a broader context and help to identify studies that are missing to properly assess toxicity.

Animal Welfare Considerations When Conducting OECD Test Guideline Inhalation and Toxicokinetic Studies for Nanomaterials

The OECD test guidelines for animal experiments play an important role in evaluating the chemical hazards. Animal tests performed using OECD guidelines, especially when the good laboratory practice (GLP) principle is applied, reduce the duplication of toxicity testing and ensure the best mutual acceptance of data by the OECD's Mutual Acceptance of Data (MAD). The OECD inhalation toxicity test guidelines 412 (28 days) and 413 (90 days) have been revised. These OECD guidelines now reflect the inclusion of nanomaterials and recent scientific and technological developments. In particular, these test guidelines aim to evaluate the bronchoalveolar lavage fluid in the lungs for objective toxicity evaluation, along with the existing subjective histopathological evaluation. For solid particles, the lung burden measurement of particles is required for toxicokinetic studies and, in order to properly perform a toxicokinetic study, two post-exposure observations are recommended. In light of the revised OECD guidelines, we propose a method to reduce the number of animals when testing is conducted for nanomaterials.

Future Prospects for Clinical Applications of Nanocarbons Focusing on Carbon Nanotubes

Over the past 15 years, numerous studies have been conducted on the use of nanocarbons as biomaterials towards such applications as drug delivery systems, cancer therapy, and regenerative medicine. However, the clinical use of nanocarbons remains elusive, primarily due to short- and long-term safety concerns. It is essential that the biosafety of each therapeutic modality be demonstrated in logical and well-conducted experiments. Accordingly, the fundamental techniques for assessing nanocarbon biomaterial safety have become more advanced. Optimal controls are being established, nanocarbon dispersal techniques are being refined, the array of biokinetic evaluation methods has increased, and carcinogenicity examinations under strict conditions have been developed. The medical implementation of nanocarbons as a biomaterial is in sight. With a particular focus on carbon nanotubes, these perspectives aim to summarize the contributions to date on nanocarbon applications and biosafety, introduce the recent achievements in evaluation techniques, and clarify the future prospects and systematic introduction of carbon nanomaterials for clinical use through practical yet sophisticated assessment methods.

Analysis of Nanomaterials on Biological and Environmental Systems and New Analytical Methods for Improved Detection

The advancing field of nanoscience has produced lower mass, smaller size, and expanded chemical composition nanoparticles over recent years. These new nanoparticles have challenged traditional analytical methods of qualification and quantification. Such advancements in nanoparticles and nanomaterials have captured the attention of toxicologists with concerns regarding the environment and human health impacts. Given that nanoparticles are only limited by size (1–100 nm), their chemical and physical characteristics can drastically change and thus alter their overall nanotoxicity in unpredictable ways. A significant limitation to the development of nanomaterials is that traditional regulatory and scientific methods used to assess the biological and environmental toxicity of chemicals do not generally apply to the assessment of nanomaterials. Significant research effort has been initiated, but much more is still needed to develop new and improved analytical measurement methods for detecting and quantitating nanomaterials in biological and environmental systems.

Multi-walled carbon nanotubes induce airway hyperresponsiveness in human bronchi by stimulating sensory C-fibers and increasing the release of neuronal acetylcholine

OBJECTIVES

The potential of multi-walled carbon nanotubes (MWCNTs) in inducing airway hyperresponsiveness (AHR) was investigated in human airways.

METHODS

Human isolated bronchi were exposed to MWCNTs and the contractility to electrical field stimulation (EFS) was measured. Neuronal acetylcholine (ACh) and cyclic adenosine monophosphate (cAMP) were quantified. Some tissues were desensitized by consecutive administrations of capsaicin.

RESULTS

MWCNTs (100 ng/ml - 100 µg/ml) induced AHR (overall contractile tone vs. negative control: +83.43 ± 11.13%, P < 0.01). The potency was significantly (P < 0.05) greater when airways were stimulated at low frequency (EFS_3Hz) then at medium-to-high frequencies (EFS_10Hz and EFS_25Hz) (delta potency: +2.13 ± 0.74 and +2.40 ± 0.65 logarithms, respectively). In capsaicin-desensitized airways, the AHR to MWCNTs 100 ng/ml was abolished. MWCNTs increased the release of ACh, an effect prevented by capsaicin-desensitization (-90.17 ± 18.59%, P < 0.05). MWCNTs did not alter the level of cAMP.

CONCLUSION

MWCNTs administered at low concentrations elicit AHR in human airways by activating sensory C-fibers and, in turn, increasing the release of neuronal ACh. Our results suggest that work is required to understand the impact of MWCNTs in patients at risk of AHR, such as those suffering from chronic obstructive respiratory disorders.

Retained particle surface area dose drives inflammation in rat lungs following acute, subacute, and subchronic inhalation of nanomaterials

Background

An important aspect of nanomaterial (NM) risk assessment is establishing relationships between physicochemical properties and key events governing the toxicological pathway leading to adverse outcomes. The difficulty of NM grouping can be simplified if the most toxicologically relevant dose metric is used to assess the toxicological dose-response.

Here, we thoroughly investigated the relationship between acute and chronic inflammation (based on polymorphonuclear neutrophil influx (% PMN) in lung bronchoalveolar lavage) and the retained surface area in the lung. Inhalation studies were performed in rats with three classes of NMs: titanium dioxides (TiO₂) and carbon blacks (CB) as poorly soluble particles of low toxicity (PSLT), and multiwall carbon nanotubes (MWCNTs). We compared our results to published data from nearly 30 rigorously selected articles.

Results

This analysis combined data specially generated for this work on three benchmark materials - TiO₂ P25, the CB Printex-90 and the MWCNT MWNT-7 - following subacute (4-week) inhalation with published data relating to acute (1-week) to subchronic (13-week) inhalation exposure to the classes of NMs considered. Short and long post-exposure recovery times (immediately after exposure up to more than 6 months) allowed us to examine both acute and chronic inflammation.

A dose-response relationship across short-term and long-term studies was revealed linking pulmonary retained surface area dose (measured or estimated) and % PMN. This relationship takes the form of sigmoid curves, and is independent of the post-exposure time. Curve fitting equations depended on the class of NM considered, and sometimes on the duration of exposure. Based on retained surface area, long and thick MWCNTs (few hundred nm long with an aspect ratio greater than 25) had a higher inflammatory potency with 5 cm²/g lung sufficient to trigger an inflammatory response (at 6% PMN), whereas retained surfaces greater than 150 cm²/g lung were required for PSLT.

Conclusions

Retained surface area is a useful metric for hazard grouping purposes. This metric would apply to both micrometric and nanometric materials, and could obviate the need for direct measurement in the lung. Indeed, it could alternatively be estimated from dosimetry models using the aerosol parameters (rigorously determined following a well-defined aerosol characterization strategy).

Supplementary Information

The online version contains supplementary material available at 10.1186/s12989-021-00419-w.

Quality assurance for nanomaterial inhalation toxicity testing

The recent revision of OECD inhalation toxicology test guidelines 412 and 413 presents new challenges for both the study director (SD) and quality assurance (QA) personnel when conducting GLP (good laboratory practice) studies. In the case of nanomaterial inhalation exposure studies, GLP has rarely been applied, yet the new revisions are applicable to soluble and insoluble nanomaterials, as well as conventional chemicals. For example, the new guidelines require an additional bronchoalveolar lavage (BAL) fluid assay and lung burden measurement during the post-exposure observation (PEO) period, plus nanomaterial physicochemical characterization before and after nano-aerosol generation when exposing experimental animals. Implementing these revised guidelines will prove especially challenging for QA measures related to the physicochemical characterization and aerosolization of test nanomaterials. Therefore, this review examines the key elements involved in nanomaterial inhalation GLP testing under the revised OECD guidelines, suggests an alternative to the increased animal numbers, in consideration of animal welfare and with scientific merits, and discusses the limitation of toxicokinetic estimation using the new testing guidelines.

Lung retention and particokinetics of silver and gold nanoparticles in rats following subacute inhalation co-exposure

Background

Inhalation exposure to nanomaterials in workplaces can include a mixture of multiple nanoparticles. Such ambient nanoparticles can be of high dissolution or low dissolution in vivo and we wished to determine whether co-exposure to particles with different dissolution rates affects their biokinetics.

Methods and Results

Rats were exposed to biosoluble silver nanoparticles (AgNPs, 10.86 nm) and to biopersistent gold nanoparticles (AuNPs, 10.82 nm) for 28 days (6-h/day, 5-days/week for 4 weeks) either with separate NP inhalation exposures or with combined co-exposure. The separate NPs mass concentrations estimated by the differential mobility analyzer system (DMAS) were determined to be 17.68 ± 1.69 μg/m³ for AuNP and 10.12 ± 0.71 μg/m³ for AgNP. In addition, mass concentrations analyzed by atomic absorption spectrometer (AAS) via filter sampling were for AuNP 19.34 ± 2.55 μg/m³ and AgNP 17.38 ± 1.88 μg/m³ for separate exposure and AuNP 8.20 ± 1.05 μg/m³ and AgNP 8.99 ± 1.77 μg/m³ for co-exposure. Lung retention and clearance were determined on day 1 (6-h) of exposure (E-1) and on post-exposure days 1, 7, and 28 (PEO-1, PEO-7, and PEO-28, respectively). While the AgNP and AuNP deposition rates were determined to be similar due to the similarity of NP size of both aerosols, the retention half-times and clearance rates differed due to the difference in dissolution rates. Thus, when comparing the lung burdens following separate exposures, the AgNP retention was 10 times less than the AuNP retention at 6-h (E-1), and 69, 89, and 121 times lower less than the AuNP retention at PEO-1, PEO-7, and PEO-28, respectively. In the case of AuNP+AgNP co-exposure, the retained AgNP lung burden was 14 times less than the retained AuNP lung burden at E-1, and 26, 43, and 55 times less than the retained AuNP lung burden at PEO-1, PEO-7, and PEO-28, respectively. The retention of AuNP was not affected by the presence of AgNP, but AgNP retention was influenced in the presence of AuNP starting at 24 h after the first day of post day of exposure. The clearance of AgNPs of the separate exposure showed 2 phases; fast (T_1/2 3.1 days) and slow (T_1/2 48.5 days), while the clearance of AuNPs only showed one phase (T_1/2 .81.5 days). For the co-exposure of AuNPs+AgNPs, the clearance of AgNPs also showed 2 phases; fast (T_1/2 2.2 days) and slow (T_1/2 28.4 days), while the clearance of AuNPs consistently showed one phase (T_1/2 54.2 days). The percentage of Ag lung burden in the fast and slow clearing lung compartment was different between separate and combined exposure. For the combined exposure, the slow and fast compartments were each 50% of the lung burden. For the single exposure, 1/3 of the lung burden was cleared by the fast rate and 2/3 of the lung burden by the slow rate.

Conclusions

The clearance of AgNPs follows a two- phase model of fast and slow dissolution rates while the clearance of AuNPs could be described by a one- phase model with a longer half-time. The co-exposure of AuNPs+AgNPs showed that the clearance of AgNPs was altered by the presence of AuNPs perhaps due to some interaction between AgNP and AuNP affecting dissolution and/or mechanical clearance of AgNP in vivo.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12989-021-00397-z.

Even lobar deposition of poorly soluble gold nanoparticles (AuNPs) is similar to that of soluble silver nanoparticles (AgNPs)

Background

Information on particle deposition, retention, and clearance is important when evaluating the risk of inhaled nanomaterials to human health. The revised Organization Economic Cooperation and Development (OECD) inhalation toxicity test guidelines now require lung burden measurements of nanomaterials after rodent subacute and sub-chronic inhalation exposure (OECD 412, OECD 413) to inform on lung clearance behavior and translocation after exposure and during post-exposure observation (PEO). Lung burden measurements are particularly relevant when the testing chemical is a solid poorly soluble nanomaterial. Previously, the current authors showed that total retained lung burden of inhaled soluble silver nanoparticles (AgNPs) could be effectively measured using any individual lung lobe.

Methods and results

Accordingly, the current study investigated the evenness of deposition/retention of poorly soluble gold nanoparticles (AuNPs) after 1 and 5 days of inhalation exposure. Rats were exposed nose-only for 1 or 5 days (6 h/day) to an aerosol of 11 nm well-dispersed AuNPs. Thereafter, the five lung lobes were separated and the gold concentrations measured using an inductively coupled plasma-mass spectrophotometer (ICP-MS). The results showed no statistically significant difference in the AuNP deposition/retention among the different lung lobes in terms of the gold mass per gram of lung tissue.

Conclusions

Thus, it would seem that any rat lung lobe can be used for the lung burden analysis after short or long-term NP inhalation, while the other lobes can be used for collecting and analyzing the bronchoalveolar lavage fluid (BALF) and for the histopathological analysis. Therefore, combining the lung burden measurement, histopathological tissue preparation, and BALF assay from one rat can minimize the number of animals used and maximize the number of endpoints measured.

Carbon nanomaterial-derived lung burden analysis using UV-Vis spectrophotometry and proteinase K digestion

BACKGROUND

The quantification of nanomaterials accumulated in various organs is crucial in studying their toxicity and toxicokinetics. However, some types of nanomaterials, including carbon nanomaterials (CNMs), are difficult to quantify in a biological matrix. Therefore, developing improved methodologies for quantification of CNMs in vital organs is instrumental in their continued modification and application.

RESULTS

In this study, carbon black, nanodiamond, multi-walled carbon nanotube, carbon nanofiber, and graphene nanoplatelet were assembled and used as a panel of CNMs. All CNMs showed significant absorbance at 750 nm, while their bio-components showed minimal absorbance at this wavelength. Quantification of CNMs using their absorbance at 750 nm was shown to have more than 94% accuracy in all of the studied materials. Incubating proteinase K (PK) for 2 days with a mixture of lung tissue homogenates and CNMs showed an average recovery rate over 90%. The utility of this method was confirmed in a murine pharyngeal aspiration model using CNMs at 30 μg/mouse.

CONCLUSIONS

We developed an improved lung burden assay for CNMs with an accuracy > 94% and a recovery rate > 90% using PK digestion and UV-Vis spectrophotometry. This method can be applied to any nanomaterial with sufficient absorbance in the near-infrared band and can differentiate nanomaterials from elements in the body, as well as the soluble fraction of the nanomaterial. Furthermore, a combination of PK digestion and other instrumental analysis specific to the nanomaterial can be applied to organ burden analysis.

Quantitative measurement of carbon nanotubes in rat lung

Despite their numerous possible applications, the potential impact of carbon engineered nanomaterials (CEN) on human health, especially after inhalation exposure, is still questioned. Quantification of CEN in the respiratory system is a recurring issue and deposition and pulmonary biopersistence data are essential for toxicological evaluation. In this context, a fully validated standard method for CEN quantification in lung tissue is therefore imperative. The present method, based on the National Institute for Occupational Safety and Health 5040 method for atmospheric elemental and organic carbon analysis as well as on previous developments on biological matrices, involves a simple thermogravimetric analysis (TGA) of lyophilized samples, possibly preceded by a step of chemical digestion of the tissues depending on the nature of CEN investigated. The analytical method was validated for 4 CEN (carbon black as well as 3 long and thick or short and thin carbon nanotubes) for selectivity, linearity, detection and quantification limits, bias, and within-batch and between-batch precision. Calibration curves show linearity in the range of 1-40 mg/g lyophilized lung. Limits of detection for the different CEN range from 6 to 18 µg in 20 mg dry test sample. On average, within-batch precision was kept below 20 and 10% for analysis with or without a prior digestion step, respectively, whereas the corresponding between-batch precision levels reached almost 20 and 15%, respectively. The method was successfully applied to toxicological investigations for the quantitative analysis of CEN contents in rat lung exposed by inhalation.

Effects of nanosilver on hematologic, histologic and molecular parameters of rainbow trout (Oncorhynchus mykiss)

Efficient antibacterial and antifungal properties of silver nanoparticles (AgNPs) sparked its commercial application in several industrial and household products. Drastic increase of AgNPs production raised concerns over aquatic organisms' exposure. The toxic dose, mechanism of toxicity, physiological damages, gene expression alteration, hematological and blood parameter distortion by AgNP needs to be investigated to explore inevitable risk in aquatic animals. In this study, rainbow trout (Oncorhynchus mykiss) (122.4 ± 1.4 g, 23.8 ± 0.7 cm) were exposed to colloidal AgNPs (28.3 ± 12.6 um) to determine the lethal concentration (LC50)(8.9 mg/l). Sub-lethal concentrations (10 %LC50, 25 %LC50, plus LC50 value) impact on hematologic, histological and molecular responses were evaluated. Results showed sever damage to blood cells morphology, and hematologic parameters change including RBC, WBC, Hct and Hb in all AgNP-treated groups. Histological damage in gill and liver of exposed fish were observed. Significant up-regulating of HSP70 and P53 genes were detected in response to AgNPs, whereas, it was found that in comparison to HSP70 gene, P53 induction occurred in lower AgNPs concentrations and lower exposure time. These results indicate adversely effects of AgNPs exposure to aquatic environments.

Estimates of carbon nanotube deposition in the lung: improving quality and robustness

Carbon nanotube (CNT) in vivo inhalation studies are increasingly providing estimates of the quantity of material deposited in the lung, generally estimated using standard formulae and pulmonary deposition models. These models have typically been developed and validated using data from studies using sphere-like particles. Given the importance of particle morphology to pulmonary deposition, the appropriateness of such an approach was explored to identify any potential limitations. Aerosolized CNT particles typically form 'fiber-like' and/or 'broadly spherical' agglomerates. A review of currently used deposition models indicates that none have been directly validated against results for CNT, however, models for spherical particles have been extensively validated against a wide range of particle sizes and materials and are thus expected to provide reasonable estimates for most 'broadly spherical' CNT particles, although experimental confirmation of this would be of benefit, especially given their low density. The validation of fiber deposition models is significantly less extensive and, in general, focused on larger particles, e.g. asbestos. This raises concerns about the accuracy of deposition estimates for 'fiber-like' CNT particles and recommendations are made for future research to address this. An appreciation of the uncertainties on CNT deposition estimates is important for their interpretation and thus it is recommended that model sensitivity and uncertainty assessments be undertaken. Issues surrounding the measurement and derivation of model input data are also addressed, including instrument responses and particle density assessment options. Recommendations are also made for aerosol characterization to 'future-proof' CNT inhalation studies regarding advances in deposition modeling and toxicological understanding.

Biodistribution and acute toxicity of cadmium-free quantum dots with different surface functional groups in mice following intratracheal inhalation

Indium phosphide/zinc sulfate (InP/ZnS) quantum dots (QDs) are presumed to be less hazardous than those that contain cadmium. However, the toxicological profile has not been established. The present study investigated the acute toxicity of InP/ZnS QDs with different surface modifications (COOH, NH₂, and OH) in mice after pulmonary aerosol inhalation. InP/ZnS QDs were able to pass through the blood-gas barrier and enter the circulation, and subsequently accumulated in major organs. No obvious changes were observed in the body weight or major organ coefficients. Red blood cell counts and platelet-related indicators were in the normal range, but the proportion of white blood cells was altered. The InP/ZnS QDs caused varying degrees of changes in some serum markers, but no histopathological abnormalities related to InP/ZnS QDs treatment was observed in major organs except that hyperemia in alveolar septa was found in lung sections. These results suggested that the effects of respiratory exposure to InP/ZnS QDs on the lungs need to be fully considered in future biomedical application although the overall toxicity of quantum dots is relatively low.