Development of a bond-valence based interatomic potential for BiFeO3 for accurate molecular dynamics simulations

A review of progress in theoretical modeling of polarization dynamics in ferroelectric materials

Ferroelectric materials are considered candidates for functional device application since their discovery in 1920. The functionality is realized by polarization evolution itself or the resulting effects. Studies on ferroelectrics have been going on over a century with a rough journey, because they have the excellent physical properties and also the fatal disadvantages for the device applications, where polarization microstructure and the dynamics are always the core issues. The demand for miniaturization, low energy consumption, and intelligence of devices leads to the advancement of the studies on the polarization microstructure and dynamics towards microscopic and ultrafast scales, as well as precise manipulation. This review mainly focuses on the inherent logic of the development of the theoretical modeling on the polarization dynamics. We would like to discuss the historical background of the development of theoretical models and their limitations, following the historical trajectory how to understand the multiscale nature of polarization microstructure and dynamics and the developing demand of functional devices applications, based on which the prospect and future development direction of theoretical modeling are proposed.

Investigation of structural and electrical properties of electrolyte LaGaO3 for solid oxide fuel cell

CONTEXT

Electrochemical devices such as solid oxide fuel cells (SOFCs) allow the direct transformation of fuel's chemical energy into electrical power. Even though YSZ electrolyte-based conventional SOFCs are widely used in both laboratories and on a commercial scale, developing alternative ion-conducting electrolytes is crucial for enhancing SOFC performance at lower operating temperatures. In this work, we conducted a thorough computational analysis on the characteristics of Sr- and Mg-doped superior oxide ion conductors.

METHOD

We have used the DFT technique to examine the system's electrical and structural characteristics and the impact of doping. The GII value and LaGaO3 formation energy are used to investigate thermodynamical and structural stability, respectively. Theoretical investigations are validated against data to ensure the accuracy of the computational model. The research shows that the properties of Sr- and Mg-doped LaGaO3 have changed in a desirable way. This DFT study sheds light on the underlying mechanisms that affect the structural and electronic properties of LaGaO3 electrolytes and offers a thorough investigation of the synergistic effects of strontium and magnesium co-doping. The knowledge acquired is critical for the logical design and development of more stable and efficient solid oxide fuel cells.

Neutron powder-diffraction study of phase transitions in strontium-doped bismuth ferrite: 1. Variation with chemical composition

We report results from a study of the crystal and magnetic structures of strontium-doped BiFeO₃using neutron powder diffraction and the Rietveld method. Measurements were obtained over a wide range of temperatures from 300-800 K for compositions between 10%-16% replacement of bismuth by strontium. The results show a clear variation of the two main structural deformations-symmetry-breaking rotations of the FeO₆octahedra and polar ionic displacements that give ferroelectricity-with chemical composition, but relatively little variation with temperature. On the other hand, the antiferromagnetic order shows a variation with temperature and a second-order phase transition consistent with the classical Heisenberg model. There is, however, very little variation in the behaviour of the antiferromagnetism with chemical composition, and hence with the degree of the structural symmetry-breaking distortions. We therefore conclude that there is no significant coupling between antiferromagnetism and ferroelectricity in Sr-doped BiFeO₃and, by extension, in pure BiFeO₃.

Materials for a Sustainable Microelectronics Future: Electric Field Control of Magnetism with Multiferroics

This article is written on behalf of many colleagues, collaborators, and researchers in the field of complex oxides as well as current and former students and postdocs who continue to enable and undertake cutting-edge research in the field of multiferroics, magnetoelectrics, and the pursuit of electric-field control of magnetism. What I present is something that is extremely exciting from both a fundamental science and applications perspective and has the potential to revolutionize our world, particularly from a sustainability perspective. To realize this potential will require numerous new innovations, both in the fundamental science arena as well as translating these scientific discoveries into real applications. Thus, this article will attempt to bridge the gap between fundamental materials physics and the actual manifestations of the physical concepts into real-life applications. I hope this article will help spur more translational research within the broad materials community.

Interplay of domain structure and phase transitions: theory, experiment and functionality

Domain walls and phase boundaries are fundamental ingredients of ferroelectrics and strongly influence their functional properties. Although both interfaces have been studied for decades, often only a phenomenological macroscopic understanding has been established. The recent developments in experiments and theory allow to address the relevant time and length scales and revisit nucleation, phase propagation and the coupling of domains and phase transitions. This review attempts to specify regularities of domain formation and evolution at ferroelectric transitions and give an overview on unusual polar topological structures that appear as transient states and at the nanoscale. We survey the benefits, validity, and limitations of experimental tools as well as simulation methods to study phase and domain interfaces. We focus on the recent success of these tools in joint scale-bridging studies to solve long lasting puzzles in the field and give an outlook on recent trends in superlattices.

Factors Governing Oxygen Vacancy Formation in Oxide Perovskites

The control of oxygen vacancy (V_O) formation is critical to advancing multiple metal-oxide-perovskite-based technologies. We report the construction of a compact linear model for the neutral V_O formation energy in ABO₃ perovskites that reproduces, with reasonable fidelity, Hubbard-U-corrected density functional theory calculations based on the state-of-the-art, strongly constrained and appropriately normed exchange-correlation functional. We obtain a mean absolute error of 0.45 eV for perovskites stable at 298 K, an accuracy that holds across a large, electronically diverse set of ABO₃ perovskites. Our model considers perovskites containing alkaline-earth metals (Ca, Sr, and Ba) and lanthanides (La and Ce) on the A-site and 3d transition metals (Ti, V, Cr, Mn, Fe, Co, and Ni) on the B-site in six different crystal systems (cubic, tetragonal, orthorhombic, hexagonal, rhombohedral, and monoclinic) common to perovskites. Physically intuitive metrics easily extracted from existing experimental thermochemical data or via inexpensive quantum mechanical calculations, including crystal bond dissociation energies and (solid phase) reduction potentials, are key components of the model. Beyond validation of the model against known experimental trends in materials used in solid oxide fuel cells, the model yields new candidate perovskites not contained in our training data set, such as (Bi,Y)(Fe,Co)O₃, which we predict may have favorable thermochemical water-splitting properties. The confluence of sufficient accuracy, efficiency, and interpretability afforded by our model not only facilitates high-throughput computational screening for any application that requires the precise control of V_O concentrations but also provides a clear picture of the dominant physics governing V_O formation in metal-oxide perovskites.

Electric field control of magnetism

Electric field control of magnetism is an extremely exciting area of research, from both a fundamental science and an applications perspective and has the potential to revolutionize the world of computing. To realize this will require numerous further innovations, both in the fundamental science arena as well as translating these scientific discoveries into real applications. Thus, this article will attempt to bridge the gap between condensed matter physics and the actual manifestations of the physical concepts into applications. We have attempted to paint a broad-stroke picture of the field, from the macroscale all the way down to the fundamentals of spin–orbit coupling that is a key enabler of the physics discussed. We hope it will help spur more translational research within the broad materials physics community. Needless to say, this article is written on behalf of a large number of colleagues, collaborators and researchers in the field of complex oxides as well as current and former students and postdocs who continue to pursue cutting-edge research in this field.

SCC-DFTB Parameters for Fe-C Interactions

We present an optimized density-functional tight-binding (DFTB) parameterization for iron-based complexes based on the popular trans3d set of parameters. The transferability of the original and optimized parameterizations is assessed using a set of 50 iron complexes, which include carbonyl, cyanide, polypyridine, and cyclometalated ligands. DFTB-optimized structures predicted using the trans3d parameters show a good agreement with both experimental crystal geometries and density functional theory (DFT)-optimized structures for Fe-N bond lengths. Conversely, Fe-C bond lengths are systematically overestimated. We improve the accuracy of Fe-C interactions by truncating the Fe-O repulsive potential and reparameterizing the Fe-C repulsive potential using a training set of six isolated iron complexes. The new trans3d*-LANLFeC parameter set can produce accurate Fe-C bond lengths in both geometry optimizations and molecular dynamics (MD) simulations, without significantly affecting the accuracy of Fe-N bond lengths. Moreover, the potential energy curves of Fe-C interactions are considerably improved. This improved parameterization may open the door to accurate MD simulations at the DFTB level of theory for large systems containing iron complexes, such as sensitizer-semiconductor assemblies in dye-sensitized solar cells, that are not easily accessible with DFT approaches because of the large number of atoms.

Strain-induced room-temperature ferroelectricity in SrTiO3 membranes

Advances in complex oxide heteroepitaxy have highlighted the enormous potential of utilizing strain engineering via lattice mismatch to control ferroelectricity in thin-film heterostructures. This approach, however, lacks the ability to produce large and continuously variable strain states, thus limiting the potential for designing and tuning the desired properties of ferroelectric films. Here, we observe and explore dynamic strain-induced ferroelectricity in SrTiO₃ by laminating freestanding oxide films onto a stretchable polymer substrate. Using a combination of scanning probe microscopy, optical second harmonic generation measurements, and atomistic modeling, we demonstrate robust room-temperature ferroelectricity in SrTiO₃ with 2.0% uniaxial tensile strain, corroborated by the notable features of 180° ferroelectric domains and an extrapolated transition temperature of 400 K. Our work reveals the enormous potential of employing oxide membranes to create and enhance ferroelectricity in environmentally benign lead-free oxides, which hold great promise for applications ranging from non-volatile memories and microwave electronics.

Previous approach lacks the ability to produce large and continuously tunable strain states due to the limited number of available substrates. Here, the authors demonstrate strain-induced ferroelectricity in SrTiO₃ membranes by laminating freestanding SrTiO₃ films onto a stretchable polymer.

Terahertz field-induced ferroelectricity in quantum paraelectric SrTiO3

"Hidden phases" are metastable collective states of matter that are typically not accessible on equilibrium phase diagrams. These phases can host exotic properties in otherwise conventional materials and hence may enable novel functionality and applications, but their discovery and access are still in early stages. Using intense terahertz electric field excitation, we found that an ultrafast phase transition into a hidden ferroelectric phase can be dynamically induced in quantum paraelectric strontium titanate (SrTiO₃). The induced lowering in crystal symmetry yields substantial changes in the phonon excitation spectra. Our results demonstrate collective coherent control over material structure, in which a single-cycle field drives ions along the microscopic pathway leading directly to their locations in a new crystalline phase on an ultrafast time scale.

Advances in magnetoelectric multiferroics

The manipulation of magnetic properties by an electric field in magnetoelectric multiferroic materials has driven significant research activity, with the goal of realizing their transformative technological potential. Here, we review progress in the fundamental understanding and design of new multiferroic materials, advances in characterization and modelling tools to describe them, and the exploration of devices and applications. Focusing on the translation of the many scientific breakthroughs into technological innovations, we identify the key open questions in the field where targeted research activities could have maximum impact in transitioning scientific discoveries into real applications.

Bond Order Conservation Principle and Peculiarities of the Metal-Metal Bonding

Pauling's principles developed later in the bond valence model (BVM) are fundamental in description of bonding in ionic solids and surface phenomena on metals, but applicability of these principles to the metal-metal bonds in the bulk compounds was demonstrated only recently, with a spotlight on the bond valence-bond length correlations. This work is focused on the bond order conservation in cluster compounds and determination of empiric bond valence parameters for the metal-metal bonds, which ensure very simple and reasonably accurate bonding analysis, with zero cost, in any complex cluster compound. Such peculiarities of cluster compounds as matrix effect and nonuniform distribution of the ionic charges (bond valence sums) on the ligands around metal clusters, as well as other important examples of the BVM application to compounds with metal-metal bonds, are discussed.

Large polarization gradients and temperature-stable responses in compositionally-graded ferroelectrics

A range of modern applications require large and tunable dielectric, piezoelectric or pyroelectric response of ferroelectrics. Such effects are intimately connected to the nature of polarization and how it responds to externally applied stimuli. Ferroelectric susceptibilities are, in general, strongly temperature dependent, diminishing rapidly as one transitions away from the ferroelectric phase transition (T_C). In turn, researchers seek new routes to manipulate polarization to simultaneously enhance susceptibilities and broaden operational temperature ranges. Here, we demonstrate such a capability by creating composition and strain gradients in Ba_1−xSr_xTiO₃ films which result in spatial polarization gradients as large as 35 μC cm⁻² across a 150 nm thick film. These polarization gradients allow for large dielectric permittivity with low loss (ɛ_r≈775, tan δ<0.05), negligible temperature-dependence (13% deviation over 500 °C) and high-dielectric tunability (greater than 70% across a 300 °C range). The role of space charges in stabilizing polarization gradients is also discussed.

Future technologies based on ferroelectric materials will require new routes to control the nature of polar order. Through a combined experimental and theoretical study of compositionally and strain-graded Ba1-xSrxTiO3 heterostructures, Damodaran et al. demonstrate the ability to engineer large polarization gradients and temperature-stable susceptibilities.

Asymmetric Response of Ferroelastic Domain-Wall Motion under Applied Bias

The switching of domains in ferroelectric and multiferroic materials plays a central role in their application to next-generation computer systems, sensing applications, and memory storage. A detailed understanding of the response to electric fields and the switching behavior in the presence of complex domain structures and extrinsic effects (e.g., defects and dislocations) is crucial for the design of improved ferroelectrics. In this work, in situ transmission electron microscopy is coupled with atomistic molecular dynamics simulations to explore the response of 71° ferroelastic domain walls in BiFeO3 with various orientations under applied electric-field excitation. We observe that 71° domain walls can have intrinsically asymmetric responses to opposing biases. In particular, when the electric field has a component normal to the domain wall, forward and backward domain-wall velocities can be dramatically different for equal and opposite fields. Additionally, the presence of defects and dislocations can strongly affect the local switching behaviors through pinning or nucleation of the domain walls. These results offer insight for controlled ferroelastic domain manipulation via electric-field engineering.

Ferroelectric polarization reversal via successive ferroelastic transitions

Switchable polarization makes ferroelectrics a critical component in memories, actuators and electro-optic devices, and potential candidates for nanoelectronics. Although many studies of ferroelectric switching have been undertaken, much remains to be understood about switching in complex domain structures and in devices. In this work, a combination of thin-film epitaxy, macro- and nanoscale property and switching characterization, and molecular dynamics simulations are used to elucidate the nature of switching in PbZr(0.2)Ti(0.8)O3 thin films. Differences are demonstrated between (001)-/(101)- and (111)-oriented films, with the latter exhibiting complex, nanotwinned ferroelectric domain structures with high densities of 90° domain walls and considerably broadened switching characteristics. Molecular dynamics simulations predict both 180° (for (001)-/(101)-oriented films) and 90° multi-step switching (for (111)-oriented films) and these processes are subsequently observed in stroboscopic piezoresponse force microscopy. These results have implications for our understanding of ferroelectric switching and offer opportunities to change domain reversal speed.