A doublet microlens array for imaging micron-sized objects

Strain-Multiplex Metalens Array for Tunable Focusing and Imaging

Metalenses on a flexible template are engineered metal-dielectric interfaces that improve conventional imaging system and offer dynamic focusing and zooming capabilities by controlling the focal length and bandwidth through a mechanical or external stretch. However, realizing large-scale and cost-effective flexible metalenses with high yields in a strain-multiplex fashion remains as a great challenge. Here, single-pulsed, maskless light interference and imprinting technique is utilized to fabricate reconfigurable, flexible metalenses on a large-scale and demonstrate its strain-multiplex tunable focusing. Experiments, in accordance with the theory, show that applied stretch on the flexible-template reconfigurable diffractive metalenses (FDMLs) accurately mapped focused wavefront, bandwidth, and focal length. The surface relief metastructures consisted of metal-coated hemispherical cavities in a hexagonal close-packed arrangement to enhance tunable focal length, numerical aperture, and fill factor, FF ≈ 100% through normal and angular light illumination with external stretch. The strain-multiplex of FDMLs approach lays the foundation of a new class of large-scale, cost-effective metalens offering tunable light focusing and imaging.

An optofluidic system with integrated microlens arrays for parallel imaging flow cytometry

In recent years, high-speed imaging has become increasingly effective for the rapid analysis of single cells in flowing environments. Single cell imaging methods typically incorporate a minimum magnification of 10× when extracting sizing and morphological information. Although information content may be significantly enhanced by increasing magnification, this is accompanied by a corresponding reduction in field of view, and thus a decrease in the number of cells assayed per unit time. Accordingly, the acquisition of high resolution data from wide field views remains an unsolved challenge. To address this issue, we present an optofluidic flow cytometer integrating a refractive, microlens array (MLA) for imaging cells at high linear velocities, whilst maximizing the number of cells per field of view. To achieve this, we adopt an elasto-inertial approach for cell focusing within an array of parallel microfluidic channels, each equipped with a microlens. We characterize the optical performance of the microlenses in terms of image formation, magnification and resolution using both ray-tracing simulations and experimental measurements. Results demonstrate that the optofluidic platform can efficiently count and magnify micron-sized objects up to 4 times. Finally, we demonstrate the capabilities of the platform as an imaging flow cyclometer, demonstrating the efficient discrimination of hB and Jurkat cells at throughputs up to 50 000 cells per second.

Fabrication of miniature elastomer lenses with programmable liquid mold for smartphone microscopy: curing polydimethylsiloxane with in situ curvature control

Miniature lenses can transform commercial imaging systems, e.g., smartphones and webcams, into powerful, low-cost, handheld microscopes. To date, the reproducible fabrication of polymer lenses is still a challenge as they require controlled dispensing of viscous liquid. This paper reports a reproducible lens fabrication technique using liquid mold with programmable curvature and off-the-shelf materials. The lens curvature is controlled during fabrication by tuning the curvature of an interface of two immiscible liquids [polydimethylsiloxane (PDMS) and glycerol]. The curvature control is implemented using a visual feedback system, which includes a software-based guiding system to produce lenses of desired curvature. The technique allows PDMS lens fabrication of a wide range of sizes and focal lengths, within 20 min. The fabrication of two lens diameters: 1 and 5 mm with focal lengths ranging between 1.2 and 11 mm are demonstrated. The lens surface and bulk quality check performed using X-ray microtomography and atomic force microscopy reveal that the lenses are suitable for optical imaging. Furthermore, a smartphone microscope with ∼1.4-μm resolution is developed using a self-assembly of a single high power fabricated lens and microaperture. The lenses have various potential applications, e.g., optofluidics, diagnostics, forensics, and surveillance.

High Numerical Aperture Hexagonal Stacked Ring-Based Bidirectional Flexible Polymer Microlens Array

Flexible imprinted photonic nanostructures that are able to diffract/focus narrow-band light have potential applications in optical lenses, filters, tunable lasers, displays, and biosensing. Nanophotonic structures through holography and roll-to-roll printing may reduce fabrication complexities and expenses and enable mass production. Here, 3D photonic nanostructures of a stacked ring array were imprinted on acrylate polymer (AP) over poly(ethylene terephthalate) (PET) substrate through holography and lift-off processes to create a microlens array (MLA). The surface structure of the array consisted of circular nonostepped pyramids, and repeated patterns were in hexagonal arrangements. Stacked-ring-based MLA (SMLA) on a flexible AP-PET substrate showed efficient bidirectional light focusing and maximum numerical aperture (NA = 0.60) with a reasonable filling factor. The nanostructures produced a well-ordered hexagonally focused diffraction pattern in the far field, and power intensities were measured through angle-resolved experiments. The variation of nanostep dimensions (width and height) and the number of steps resulted in different photonic bandgaps, and the arrays produced distance-dependent narrow-band light focusing. The validation of the SMLA was demonstrated through the text, image, and hologram projection experiments. It is anticipated that imprinted bidirectional SMLA over flexible substrates may find applications in optical systems, displays, and portable sensors.

Wafer-level fabrication of multi-element glass lenses: lens doublet with improved optical performances

This Letter reports on the fabrication of glass lens doublets arranged in arrays and realized at wafer level by means of micro-fabrication. The technique is based on the accurate vertical assembly of separately fabricated glass lens arrays. Since each one of these arrays is obtained by glass melting in silicon cavities, silicon is employed as a spacer in order to build a well-aligned and robust optical module. It is shown that optical performance achieved by the lens doublet is better than for a single lens of equivalent numerical aperture, thanks to lower optical aberrations. The technique has good potential to match the optical requirements of miniature imaging systems.

Single nucleotide polymorphism detection using gold nanoprobes and bio-microfluidic platform with embedded microlenses

The use of microfluidics platforms combined with the optimal optical properties of gold nanoparticles has found plenty of application in molecular biosensing. This paper describes a bio-microfluidic platform coupled to a non-cross-linking colorimetric gold nanoprobe assay to detect a single nucleotide polymorphism associated with increased risk of obesity fat-mass and obesity-associated (FTO) rs9939609 (Carlos et al., 2014). The system enabled significant discrimination between positive and negative assays using a target DNA concentration of 5 ng/µL below the limit of detection of the conventionally used microplate reader (i.e., 15 ng/µL) with 10 times lower solution volume (i.e., 3 µL). A set of optimization of our previously reported bio-microfluidic platform (Bernacka-Wojcik et al., 2013) resulted in a 160% improvement of colorimetric analysis results. Incorporation of planar microlenses increased 6 times signal-to-loss ratio reaching the output optical fiber improving by 34% the colorimetric analysis of gold nanoparticles, while the implementation of an optoelectronic acquisition system yielded increased accuracy and reduced noise. The microfluidic chip was also integrated with a miniature fiber spectrometer to analyze the assays' colorimetric changes and also the LEDs transmission spectra when illuminating through various solutions. Furthermore, by coupling an optical microscope to a digital camera with a long exposure time (30 s), we could visualise the different scatter intensities of gold nanoparticles within channels following salt addition. These intensities correlate well to the expected difference in aggregation between FTO positive (none to small aggregates) and negative samples (large aggregates).

MRT letter: Micro- to nanoscale sample collection for high throughput microscopy

In high throughput microscopy, it is often assumed that the objects under investigation are fixed spatially. In addition, it is also presumed that the objects are sufficiently populated, otherwise there will be need to search through vast tracks of field of views before any recording can be done. The ability to collect objects at one location in the hydrated state is thus desirable and this is a challenge when the density of target objects in a sample is very low. In this work, we report that the generation of a squeezing flow from a circular coverslip compressing on suspensions is able to collect particulate (microbeads, fluorescent nanobeads and live algal cells) and non-particulate (EGFP) objects at the rim region of the coverslip. With a coverslip of 13 mm diameter, volumes between 2 µL and 4 µL were found to completely fill the coverslip without breaching the rims. Sample compression speeds between 100 µm/s and 1000 µm/s did not have any effect on object collection outcomes. In effect, the simple placement of coverslips on top the drop of sample by hand without a motorized translator was found to produce similar collection outcomes. Quantitative measurements confirmed that all the objects investigated were displaced and relocated at the rim regions to a very high degree.

A novel handheld fluorescent microarray reader for point-of-care diagnostic

A novel handheld optical sensor for quantification of fluorescent microarrays, the so-called portMD-113 has been developed. On the surface of a planar waveguide, the spots of different fluorescently labeled biological complexes are excited by the evanescent field of the guided light. The emitted fluorescence signals of the spots are independently and simultaneously detected applying our system, which consists of a pinehole array, a microlens array, an interference filter and a detector array. As it is demonstrated in comparative measurements, the detection limit of this sensor is close to that of commercial top microarray readers, e.g. of modern laser scanners, while it has remarkable and important advantages over them. Namely, the device comprises only a few low-cost, lightweight and small components without applying any moving or energy-intensive elements, which results in turn in a commercially competitive, handheld and compact design and in the possibility to be supplied simply by a battery or a personal computer. These advantageous properties open prospects e.g. for point-of-care medical checks, as well.