Particle-laden fluid/fluid interfaces: physico-chemical foundations

Drying of Soft Colloidal Films

Thin films made of deformable micro- and nano-units, such as biological membranes, polymer interfaces, and particle-laden liquid surfaces, exhibit a complex behavior during drying, with consequences for various applications like wound healing, coating technologies, and additive manufacturing. Studying the drying dynamics and structural changes of soft colloidal films thus holds the potential to yield valuable insights to achieve improvements for applications. In this study, interfacial monolayers of core-shell (CS) microgels with varying degrees of softness are employed as model systems and to investigate their drying behavior on differently modified solid substrates (hydrophobic vs hydrophilic). By leveraging video microscopy, particle tracking, and thin film interference, this study shed light on the interplay between microgel adhesion to solid surfaces and the immersion capillary forces that arise in the thin liquid film. It is discovered that a dried replica of the interfacial microstructure can be more accurately achieved on a hydrophobic substrate relative to a hydrophilic one, particularly when employing softer colloids as opposed to harder counterparts. These observations are qualitatively supported by experiments with a thin film pressure balance which allows mimicking and controlling the drying process and by computer simulations with coarse-grained models.

Distinct Contributions of Particle Adsorption and Interfacial Compression to the Surface Pressure of a Fluid Interface

Particle-laden interfaces stabilize emulsions and foams and can serve as a platform for multiscale materials. Favorable wetting of a particle to a fluid interface reduces the apparent interfacial tension through area replacement with a linear relationship between the apparent surface pressure and the particle area fraction. The area replacement model is widely employed, often up to particle area fraction reaching the maximum hexagonal packing. However, data directly supporting the area replacement model are limited, and the description ignores contributions from particle-particle interactions and does not describe the surface pressure during the compression of a particle-laden interface. This work reports on the direct validation of the area replacement model through the direct measurement of the adsorption energy, surface pressure, and area fraction of adsorbed particles. Experiments combining tensiometry and confocal imaging during the adsorption of colloidal particles to the oil-water interface confirm the area replacement model within the observed range of area fraction, but only when the drop area is kept constant. Results highlight the importance of keeping the droplet area constant during particle adsorption to extract the adsorbed amount from tensiometry experiments. As particles adsorb to the interface, the droplet area tends to change and compresses or expands the interface. This change in area is associated with an increase in area fraction at nearly constant surface pressure, which deviates from the area replacement model. In contrast to particle adsorption, slow compression of the fluid interface leads to a negligible change in surface pressure up to an area fraction of η ∼ 0.26 for the materials systems investigated. Increase in surface pressure during compression is due to particle-particle interactions, while compression at higher strain rates introduces additional contributions from interfacial rheology.

Creating High Yield Stress Particle-Laden Oil/Water Interfaces Using Charge Bidispersity

Interfacial engineering has been increasingly used to stabilize Pickering emulsions in commercial products and biomedical applications. Pickering emulsion stabilization is aided by interfacial viscoelasticity; however, typically the primary means of stabilization are steric hindrances between high surface concentration shells of particles around the drops. In this work, the concept of creating large interfacial viscoelastic yield stresses with low particle surface concentrations (<50%) using bidisperse charged particle systems is tested to evaluate their potential efficacy in emulsion stabilization. To explore this hypothesis, interfacial rheology and visualization experiments are conducted at o/w interfaces using positively charged amidine, negatively charged carboxylate, and negatively charged sulfate-coated latex spheres and compared to a model based on interparticle forces. Bidisperse particle systems have been observed to create more networked structures than monodisperse systems. For surface concentrations of <50%, bidisperse interfaces created measurable viscoelastic moduli ∼1 order of magnitude larger than monodisperse interfaces. Furthermore, these interfaces have measurable yield stresses on the order of 10-4 Pa·m when monodisperse systems have none. Bidispersity impacts surface viscoelasticity primarily by increasing the overall magnitude of attraction between particles at the interface and not due to changes in the microstructure. The developed model predicts the relative surface fraction that creates the largest moduli and shows good agreement with the experimental data. The results demonstrate the ability to create large viscoelastic moduli for small surface fractions of particles, which may enable stabilization using fewer particles in future applications.

Nanocrystal Assemblies: Current Advances and Open Problems

We explore the potential of nanocrystals (a term used equivalently to nanoparticles) as building blocks for nanomaterials, and the current advances and open challenges for fundamental science developments and applications. Nanocrystal assemblies are inherently multiscale, and the generation of revolutionary material properties requires a precise understanding of the relationship between structure and function, the former being determined by classical effects and the latter often by quantum effects. With an emphasis on theory and computation, we discuss challenges that hamper current assembly strategies and to what extent nanocrystal assemblies represent thermodynamic equilibrium or kinetically trapped metastable states. We also examine dynamic effects and optimization of assembly protocols. Finally, we discuss promising material functions and examples of their realization with nanocrystal assemblies.

Demulsification of Silica Stabilized Pickering Emulsions Using Surface Freezing Transition of CTAC Adsorbed Films at the Tetradecane-Water Interface

The adsorbed film of cetyltrimethylammonium chloride (CTAC) at the tetradecane (C14) - water interface undergoes a first-order surface transition from two-dimensional liquid to solid states upon cooling. In this paper, we utilized this surface freezing transition to realize a spontaneous demulsification of Pickering emulsions stabilized by silica particles. In the temperature range above the surface freezing transition, the interfacial tension of silica laden oil-water interface was lower than CTAC adsorbed film, hence, stable Pickering emulsion was obtained by vortex mixing. However, the interfacial tension of CTAC adsorbed film decreased rapidly below the surface freezing temperature and became lower than the silica laden interface. The reversal of the interfacial tensions between silica laden and CTAC adsorbed films gave rise to Pickering emulsion demulsification by the desorption of silica particles from the oil-water interface. The exchange of silica particles and CTAC at the surface of emulsion droplets was also confirmed experimentally by using phase modulation ellipsometry at the oil-water interface.

Effect of the Interfacial Tension on the Stability of Silica Stabilized Pickering Emulsions near the Lower Critical Solution Temperature of 2,6-Lutidine - Water Mixtures

In this paper, the kinetic stability of Pickering emulsions stabilized by spherical silica particles (100 nm in diameter) was examined in the water - 2,6-lutidine mixture. In the close vicinity of the lower critical solution temperature, Pickering emulsions were unstable due to the ultra-low liquid-liquid interfacial tension but increased their stability with increasing the temperature. In this system, the interfacial tension obeys universal scale law and can be tuned by temperature without adding any surface-active agents. Owing to this unique feature, we elucidated the relation between the interfacial tension and the stability of Pickering emulsions.

Heterogeneous Dynamics of Sheared Particle-Laden Fluid Interfaces with Janus Particle Doping

The formation of particle clusters can substantially modify the dynamics and mechanical properties of suspensions in both two and three dimensions. While it has been well established that large network-spanning clusters increase the rigidity of particle systems, it is still unclear how the presence of localized nonpercolating clusters affects the dynamics and mechanical properties of particle suspensions. Here, we introduce self-assembled localized particle clusters at a fluid-fluid interface by mixing a fraction of Janus particles in a monolayer of homogeneous colloids. Each Janus particle binds to a few nearby homogeneous colloids, resulting in numerous small clusters uniformly distributed across the interface. Using a custom magnetic rod interfacial stress rheometer, we apply linear oscillatory shear to the particle-laden fluid interface. By analyzing the local affine deformation of particles from optical microscopy, we show that particles in localized clusters experience substantially lower shear-induced stretching than their neighbors outside clusters. We hypothesize that such heterogeneous dynamics induced by particle clusters increase the effective surface coverage of particles, which in turn enhances the shear moduli of the interface, as confirmed by direct interfacial rheological measurements. Our study illustrates the microscopic dynamics of small clusters in a shear flow and reveals their profound effects on the macroscopic rheology of particle-laden fluid interfaces. Our findings open an avenue for designing interfacial materials with improved mechanical properties via the control of formation of localized particle clusters.

Particle Size and Rheology of Silica Particle Networks at the Air-Water Interface

Silica nanoparticles find utility in different roles within the commercial domain. They are either employed in bulk within pharmaceutical formulations or at interfaces in anti-coalescing agents. Thus, studying the particle attributes contributing to the characteristics of silica particle-laden interfaces is of interest. The present work highlights the impact of particle size (i.e., 250 nm vs. 1000 nm) on the rheological properties of interfacial networks formed by hydrophobically modified silica nanoparticles at the air-water interface. The particle surface properties were examined using mobility measurements, Langmuir trough studies, and interfacial rheology techniques. Optical microscopy imaging along with Langmuir trough studies revealed the microstructure associated with various surface pressures and corresponding surface coverages (ϕ). The 1000 nm silica particle networks gave rise to a higher surface pressure at the same coverage compared to 250 nm particles on account of the stronger attractive capillary interactions. Interfacial rheological characterization revealed that networks with 1000 nm particles possess higher surface modulus and yield stress in comparison to the network obtained with 250 nm particles at the same surface pressure. These findings highlight the effect of particle size on the rheological characteristics of particle-laden interfaces, which is of importance in determining the stability and flow response of formulations comprising particle-stabilized emulsions and foams.

Stimuli-Responsive Langmuir Films Composed of Nanoparticles Decorated with Poly(N-isopropyl acrylamide) (PNIPAM) at the Air/Water Interface

The nanotechnology shift from static toward stimuli-responsive systems is gaining momentum. We study adaptive and responsive Langmuir films at the air/water interface to facilitate the creation of two-dimensional (2D) complex systems. We verify the possibility of controlling the assembly of relatively large entities, i.e., nanoparticles with diameter around 90 nm, by inducing conformational changes within an about 5 nm poly(N-isopropyl acrylamide) (PNIPAM) capping layer. The system performs reversible switching between uniform and nonuniform states. The densely packed and uniform state is observed at a higher temperature, i.e., opposite to most phase transitions, where more ordered phases appear at lower temperatures. The induced nanoparticles' conformational changes result in different properties of the interfacial monolayer, including various types of aggregation. The analysis of surface pressure at different temperatures and upon temperature changes, surface potential measurements, surface rheology experiments, Brewster angle microscopy (BAM), and scanning electron microscopy (SEM) observations are accompanied by calculations to discuss the principles of the nanoparticles' self-assembly. Those findings provide guidelines for designing other adaptive 2D systems, such as programable membranes or optical interfacial devices.

Quantification of polystyrene microsphere attachment probability at the oil‒water interface using a microfluidic platform

This study investigates the effects of interparticle interactions and wettability on the particle attachment efficacy to the oil‒water interface. Three types of PS particles with different surface functional groups were examined at varying salt concentrations and the number of particles injected into the interface. Based on the microfluidic method and the surface coverage measurement, we found that the two contributing factors significantly influenced particle attachment efficiency to the interface, while the wettability factor has a major contribution. This research contributes to the understanding of physicochemical aspects of particle assembly at fluid interfaces and can offer strategies for forming tailored structures with desired interfacial properties.

Forces Controlling the Assembly of Particles at Fluid Interfaces

The interaction of particles with fluid interfaces is ubiquitous in synthetic and natural work, involving two types of interactions: particle-interface interactions (trapping energy) and interparticle interactions. Therefore, it is urgent to gain a deep understanding of the main forces controlling the trapping of particles at fluid interfaces, and their assembly to generate a broad range of structures characterized by different degrees of order. This Perspective tries to provide an overview of the main contributions to the energetic landscape controlling the assembly of particles at fluid interfaces, which is essential for exploiting this type of interfacial systems as platforms for the fabrication of interface-based soft materials with technological interest.

Surface tension of nanoparticle dispersions unravelled by size-dependent non-occupied sites free energy versus adsorption kinetics

The surface tension of dispersions presents many types of behaviours. Although some models, based on classical surface thermodynamics, allow partial interpretation, fundamental understanding is still lacking. This work develops a single analytical physics-based formulation experimentally validated for the surface tension of various pure nanoparticle dispersions, explaining the underlying mechanisms. Against common belief, surface tension increase of dispersions appears not to occur at low but rather at intermediate surface coverage, owed by the relatively large size of nanoparticles with respect to the fluid molecules. Surprisingly, the closed-form model shows that the main responsible mechanism for the various surface tension behaviours is not the surface chemical potential of adsorbed nanoparticles, but rather that of non-occupied sites, triggered and delicately controlled by the nanoparticles ‘at a distance’, introducing the concept of the ‘non-occupancy’ effect. The model finally invites reconsidering surface thermodynamics of dispersions and provides for criteria that allow in a succinct manner to quantitatively classify the various surface tension behaviours.

Structural and Dynamical Studies of a Lipid-Nanoclay Composite Layer at the Air-Water Interface

We modulate the adsorption affinities of nanoclay particles for the air-water interface by changing the cationic surface charge composition of the lipid monolayer and thereby tune the attractive electrostatic interaction between the positively charged lipid layer and the zwitterionic nanoclay particles in the water subphase. Our findings emphasize the significance of electrostatic interaction between lipids and the nanoclay, as well as its impact on the structural and viscoelastic features of the composite layer. We use surface pressure (Π)-mean molecular area (A) isotherms, atomic force microscope (AFM), Brewster angle microscopy (BAM), and energy dispersive X-ray spectrsocopy (EDXS) measurements to analyze the structure phases of lipid and lipid-nanoclay composite interfacial layer. The Π-A isotherm curve shows that the lipid-nanoclay composite layer has a larger lift-off area than the neat lipid layer, indicating that nanoparticles adsorb at the lipid layer via electrostatic interaction between lipid and nanoclay molecules. The surface density of the adsorbed nanoclay particles increases with an increase in the composition of the cationic lipid molecules. The stress relaxation response of the composite layer, measured using step compression measurements, exhibits exponential decay and ubiquitous dependence on the cationic dimyristoy-trimethylammonium propane (DMTAP) composition in the lipid layer with crossover to faster relaxation dynamics at DMTAP > 0.75. The power-law study of the frequency-dependent dynamic viscoelastic responses of the interfacial layer, measured using the barrier oscillation method, reveals a transition from glass-like response from neat lipid layer to gel-like dynamic response for the lipid-nanoclay composite layer. A solid-like behavior is evident for all the interface layers with dilation elastic modulus (E') > dilational viscous modulus (E″); however, the dynamic response of the neat layer is largely frequency-independent, whereas lipid-nanoclay composite layers with DMTAP > 0.75 reveal a frequency-dependent dynamic responses. The frequency-dependent power-law exponent of E', E″ increases on increasing the fractional composition of cationic DMTAP from 0.1 to 1.0, which forms a saturated interface of laponite particles and behaves as a viscoelastic gel in 2D.

Effects of Oil Phase on the Inversion of Pickering Emulsions Stabilized by Palmitic Acid Decorated Silica Nanoparticles

Pickering emulsions stabilized by the interaction of palmitic acid (PA) and silica nanoparticles (SiNPs) at the water/oil interface have been studied using different alkane oil phases. The interaction of palmitic acid and SiNPs has a strong synergistic character in relation to the emulsion stabilization, leading to an enhanced emulsion stability in relation to that stabilized only by the fatty acid. This results from the formation of fatty acid-nanoparticle complexes driven by hydrogen bond interactions, which favor particle attachment at the fluid interface, creating a rigid armor that minimizes droplet coalescence. The comparison of emulsions obtained using different alkanes as the oil phase has shown that the hydrophobic mismatch between the length of the alkane chain and the C16 hydrophobic chain of PA determines the nature of the emulsions, with the solubility of the fatty acid in the oil phase being a very important driving force governing the appearance of phase inversion.

A broad perspective to particle-laden fluid interfaces systems: from chemically homogeneous particles to active colloids

Particles adsorbed to fluid interfaces are ubiquitous in industry, nature or life. The wide range of properties arising from the assembly of particles at fluid interface has stimulated an intense research activity on shed light to the most fundamental physico-chemical aspects of these systems. These include the mechanisms driving the equilibration of the interfacial layers, trapping energy, specific inter-particle interactions and the response of the particle-laden interface to mechanical perturbations and flows. The understanding of the physico-chemistry of particle-laden interfaces becomes essential for taking advantage of the particle capacity to stabilize interfaces for the preparation of different dispersed systems (emulsions, foams or colloidosomes) and the fabrication of new reconfigurable interface-dominated devices. This review presents a detailed overview of the physico-chemical aspects that determine the behavior of particles trapped at fluid interfaces. This has been combined with some examples of real and potential applications of these systems in technological and industrial fields. It is expected that this information can provide a general perspective of the topic that can be exploited for researchers and technologist non-specialized in the study of particle-laden interfaces, or for experienced researcher seeking new questions to solve.

Tuning the rheology and microstructure of particle-laden fluid interfaces with Janus particles

HYPOTHESIS

Particle-laden fluid interfaces are the central component of many natural and engineering systems. Understanding the mechanical properties and improving the stability of such interfaces are of great practical importance. Janus particles, a special class of heterogeneous colloids, might be used as an effective surface-active agent to control the assembly and interfacial rheology of particle-laden fluid interfaces.

EXPERIMENTS

Using a custom-built interfacial stress rheometer, we explore the effect of Janus particle additives on the interfacial rheology and microscopic structure of particle-laden fluid interfaces.

FINDINGS

We find that the addition of a small amount of platinum-polystyrene (Pt-PS) Janus particles within a monolayer of PS colloids (1:40 number ratio) can lead to more than an order-of-magnitude increase in surface moduli with enhanced elasticity, which improves the stability of the interface. This drastic change in interfacial rheology is associated with the formation of local particle clusters surrounding each Janus particle. We further explain the origin of local particle clusters by considering the interparticle interactions at the interface. Our experiments reveal the effect of local particle structures on the macroscopic rheological behaviors of particle monolayers and demonstrate a new way to tune the microstructure and mechanical properties of particle-laden fluid interfaces.

Soft Colloidal Particles at Fluid Interfaces

The assembly of soft colloidal particles at fluid interfaces is reviewed in the present paper, with emphasis on the particular case of microgels formed by cross-linked polymer networks. The dual polymer/colloid character as well as the stimulus responsiveness of microgel particles pose a challenge in their experimental characterization and theoretical description when adsorbed to fluid interfaces. This has led to a controversial and, in some cases, contradictory picture that cannot be rationalized by considering microgels as simple colloids. Therefore, it is necessary to take into consideration the microgel polymer/colloid duality for a physically reliable description of the behavior of the microgel-laden interface. In fact, different aspects related to the above-mentioned duality control the organization of microgels at the fluid interface, and the properties and responsiveness of the obtained microgel-laden interfaces. This works present a critical revision of different physicochemical aspects involving the behavior of individual microgels confined at fluid interfaces, as well as the collective behaviors emerging in dense microgel assemblies.

Adsorption of Hydrophilic Silica Nanoparticles at Oil-Water Interfaces with Reversible Emulsion Stabilization by Ion Partitioning

Adsorption of particles at oil-water interfaces is the basis of Pickering emulsions, which are common in nature and industry. For hydrophilic anionic particles, electrostatic repulsion and the absence of wetting inhibit spontaneous adsorption and limit the scope of materials that can be used in emulsion-based applications. Here, we explore how adding ions that selectively partition in the two fluid phases changes the interfacial electric potential and drives particle adsorption. We add oil-soluble tetrabutyl ammonium perchlorate (TBAP) to the nonpolar phase and Ludox silica nanoparticles or silica microparticles to the aqueous phase. We find a well-defined threshold TBAP concentration, above which emulsions are stable for months. This threshold increases with the particle concentration and with the oil's dielectric constant. Adding NaClO₄ salt to water increases the threshold and causes spontaneous particle desorption and droplet coalescence even without agitation. The results are explained by a model based on the Poisson-Boltzmann theory, which predicts that the perchlorate anions (ClO₄^-) migrate into the water phase and leave behind a net positive charge in the oil. Our results show how a large class of inorganic hydrophilic, anionic nanoparticles can be used to stabilize emulsions in a reversible and stimulus-responsive way, without surface modifications.

Fluid Films as Models for Understanding the Impact of Inhaled Particles in Lung Surfactant Layers

Pollution is currently a public health problem associated with different cardiovascular and respiratory diseases. These are commonly originated as a result of the pollutant transport to the alveolar cavity after their inhalation. Once pollutants enter the alveolar cavity, they are deposited on the lung surfactant (LS) film, altering their mechanical performance which increases the respiratory work and can induce a premature alveolar collapse. Furthermore, the interactions of pollutants with LS can induce the formation of an LS corona decorating the pollutant surface, favoring their penetration into the bloodstream and distribution along different organs. Therefore, it is necessary to understand the most fundamental aspects of the interaction of particulate pollutants with LS to mitigate their effects, and design therapeutic strategies. However, the use of animal models is often invasive, and requires a careful examination of different bioethics aspects. This makes it necessary to design in vitro models mimicking some physico-chemical aspects with relevance for LS performance, which can be done by exploiting the tools provided by the science and technology of interfaces to shed light on the most fundamental physico-chemical bases governing the interaction between LS and particulate matter. This review provides an updated perspective of the use of fluid films of LS models for shedding light on the potential impact of particulate matter in the performance of LS film. It should be noted that even though the used model systems cannot account for some physiological aspects, it is expected that the information contained in this review can contribute on the understanding of the potential toxicological effects of air pollution.

Playing with sizes and shapes of colloidal particles via dry etching methods

Monolayers of self-assembled quasi-spherical colloidal particles are essential building blocks in the field of materials science and engineering. More typically, they are used as a template for the fabrication of nanostructures if they serve, for instance, as a mask for deposition of new material on the surface on which particles are assembled or for etching of the material underneath; in this case, they are removed afterwards. This is what occurs in colloidal or nanosphere lithography. In some other cases, they are not used as a sacrificial material but they are incorporated in the final structure because they are inherently interesting for their properties. Independently of their specific use and application, different strategies have been devised in order to modify size and shape of colloidal particles, so as to enrich the variety of attainable patterns and to tailor the properties of the final structures and materials. In this review, we will focus on one of the most widespread methods to shape spherical colloidal particles, i.e. dry etching techniques. We will follow the development of such approaches until recent days, so as to trace an extensive panorama of the diverse parameters that can be harnessed to achieve specific morphological changes and highlight the characteristic features of the variants of this method. We will finally discuss how particles modified via dry etching can be used for patterning or can be resuspended in solvents for very diverse applications.