Rechargeable Zn-MnO2 batteries: advances, challenges and perspectives

Concentrated Chloride Electrolytes Enable High-Efficiency, Long-Cycling, and Dendrite-Free Aqueous Trivalent Antimony Batteries

Aqueous trivalent metal batteries are promising energy storage systems, which can leverage unique three-electron redox reactions to deliver high capacity and high energy. Among them, antimony (Sb) stands out with a high capacity (660 mAh g-1), abundant availability, and low cost. However, the severe Sb3+ hydrolysis reaction drastically hinders the development of aqueous antimony batteries. Herein, we address this issue by employing a concentrated lithium chloride electrolyte, which stabilizes reactive Sb3+ ions via forming robust antimony-chloride complexes. This approach effectively mitigates hydrolysis and achieves highly reversible Sb plating behavior, leading to high efficiency (99.7%-99.8%), long lifespan (7300 h, 10 months), and uniform spherical deposition morphology. When paired with a manganese dioxide (MnO2) cathode, the Sb‖MnO2 battery demonstrates a high capacity of 309 mAh g-1 and exceptional cycling stability of 50 000 cycles (∼70% retention). Additionally, Sb shows promise as a high-capacity cathode, which can integrate with low-potential zinc into novel dual-metal plating batteries with long cycling life (4,000 h). This work not only deepens our fundamental understanding of trivalent Sb3+ redox chemistry but also opens new opportunities to stabilize hydrolysable and high-charge-density cations for multivalent battery applications.

Nondestructive Analysis of Commercial Batteries

Electrochemical batteries play a crucial role for powering portable electronics, electric vehicles, large-scale electric grids, and future electric aircraft. However, key performance metrics such as energy density, charging speed, lifespan, and safety raise significant consumer concerns. Enhancing battery performance hinges on a deep understanding of their operational and degradation mechanisms, from material composition and electrode structure to large-scale pack integration, necessitating advanced characterization methods. These methods not only enable improved battery performance but also facilitate early detection of substandard or potentially hazardous batteries before they cause serious incidents. This review comprehensively examines the operational principles, applications, challenges, and prospects of cutting-edge characterization techniques for commercial batteries, with a specific focus on in situ and operando methodologies. Furthermore, it explores how these powerful tools have elucidated the operational and degradation mechanisms of commercial batteries. By bridging the gap between advanced characterization techniques and commercial battery technologies, this review aims to guide the design of more sophisticated experiments and models for studying battery degradation and enhancement.

Realizing the Electrode Engineering Significance Through Porous Organic Framework Materials for High-Capacity Aqueous Zn-Alkaline Battery

Energy storage technologies are eminently developed to address renewable energy utilization efficiently. Porous framework materials possess high surface area and pore volume, allowing for efficient ion transportation and storage. Their unique structure facilitates fast electron transfer, leading to improved battery kinetics. Porous organic framework materials like metal-organic (MOF) and covalent organic (COF) frameworks have immense potential in enhancing the charge/discharge performances of aqueous Zn-alkaline batteries. Organic frameworks and their derivatives can be modified feasibly to exhibit significant chemical stability, enabling them to tolerate the harsh battery environment. Zn-alkaline batteries can achieve enhanced energy density, longer lifespan, and improved rechargeability by incorporating MOFs and COFs, such as electrodes, separators, or electrolyte additives, into the battery architecture. The present review highlights the significant electrode design strategies based on porous framework materials for aqueous Zn-alkaline batteries, such as Zn-Ni, Zn-Mn, Zn-air, and Zn-N2/NO3 batteries. Besides, the discussion on the issues faced by the Zn anode and the essential anode design strategies to solve the issues are also included.

Ultrathin carbon film as ultrafast rechargeable cathode for hybrid sodium dual-ion capacitor

The development of electrochemical energy storage devices has a decisive impact on clean renewable energy. Herein, novel ultrafast rechargeable hybrid sodium dual-ion capacitors (HSDICs) were designed by using ultrathin carbon film (UCF) as the cathode material. The UCF is synthesized by a simple low temperature catalytic route followed by an acid leaching process. UCF owns a large adsorption interface and number of additional active sites, which is due to the nitrogen doping. In addition, there exists several short-range order carbons on the surface of UCF, which are beneficial for anionic storage. An ultrafast rechargeable remarkable performance, remarkable anion hybrid storage capability and outstanding structure stability is fully tapped employing UCF as cathode for HSDICs. The electrochemical performance of UCF in a half-cell system at the operating voltage between 1.0 and 4.8 V, achieving an admirable specific discharge capacity of 358.52 mAh·g-1at 500 mA·g-1, and a high capacity retention ratio of 98.42% after cycling 2500 times at 1000 mA·g-1, respectively. Besides, with the support ofex-situTEM and EDS mapping, the structural stability principle and anionic hybrid storage mechanism of UCF electrode are investigated in depth. In the full-cell system, HSDICs with the UCF as cathode and hard carbon as anode also presents a super-long cycle stability (80.62% capacity retention ratio after cycling 1300 times at 1000 mA·g-1).

Inducing Mn defects within MnTiO3 cathode for aqueous zinc-ion batteries

Layered manganese-based cathode materials are considered as one of the promising cathodes benefit from inherent low manufacturing cost, non-toxic and high safety in aqueous zinc-ion batteries (AZIBs). However, the sluggish reaction kinetics within layered cathodes is inevitable due to the poor electrical/ionic conductivity. Herein, MnTiO3 is reported as a new cathode material for AZIBs and in-situ induced Mn-defect within MnTiO3 during the first charging is desirable to improve the reaction kinetics to a great extent. Additionally, DFT calculations further demonstrate that MnTiO3 with manganese defects exhibits a uniform charge distribution at the defect sites, enhancing the attraction towards H+ and Zn2+ ions. Furthermore, it performs good cycling stability which can obtain 115 mA h g-1 even at 400 mA g-1 after 450 cycles and the discharge capacity reaches up to 233.8 mAh/g at 100 mA g-1 when Mn-defect MnTiO3 was employed as the cathode. This research could provide a new method for the development and mechanism research of cathode materials for AZIBs.

A Tellurium-Boosted High-Areal-Capacity Zinc-Sulfur Battery

Aqueous rechargeable zinc-sulfur (Zn-S) batteries are a promising, cost-effective, and high-capacity energy storage technology. Still, they are challenged by the poor reversibility of S cathodes, sluggish redox kinetics, low S utilization, and unsatisfactory areal capacity. This work develops a facile strategy to achieve an appealing high-areal-capacity (above 5 mAh cm-2) Zn-S battery by molecular-level regulation between S and high-electrical-conductivity tellurium (Te). The incorporation of Te as a dopant allows for manipulation of the Zn-S electrochemistry, resulting in accelerated redox conversion, and enhanced S utilization. Meanwhile, accompanied by the S-ZnS conversion, Te is converted to zinc telluride during the discharge process, as revealed by ex-situ characterizations. This additional redox reaction contributes to the S cathode's total excellent discharge capacity. With this unique cathode structure design, the carbon-confined TeS cathode (denoted as Te1S7/C) delivers a high reversible capacity of 1335.0 mAh g-1 at 0.1 A g-1 with a mass loading of 4.22 mg cm-2, corresponding to a remarkable areal capacity of 5.64 mAh cm-2. Notably, a hybrid electrolyte design uplifts discharge plateau, reduces overpotential, suppresses Zn dendrites growth, and extends the calendar life of Zn-Te1S7 batteries. This study provides a rational S cathode structure to realize high-capacity Zn-S batteries for practical applications.

Comparative investigation of the catalytic application of α/β/γ-MnO2 nanoparticles synthesized by green and chemical approaches

Three phases (α, β, and γ) of manganese dioxide (MnO2) are successfully stabilized in a single entity for the first time. For this purpose, Citrullus colocynthis (bitter apple) extract is used as a natural surfactant in green synthesis. MnO2 nanoparticles were synthesized in the presence and absence of plant extracts under the same conditions. The morphology of both products is analysed by SEM and STEM to understand the role of plant extract in controlling the morphology of particles. The crystallinity and composition are analysed by XRD and confirmed that the product is composed of multiple phases α, β, and γ. The reduction of dyes and nitroarenes is studied using MnO2 nanoparticles (green and chemical products) as catalysts. The apparent rate constant, a percentage reduction, time reduction and reduced concentration compare the activities of both catalysts. After comparative data analysis, the catalytic reduction of picric acid is found fastest among all the substrates. All the results are analysed based on structure, functional group and affinity towards catalysts.

Ice crystal sublimation for easily producing MnO2 cathodes with hierarchically porous structure and enhanced cyclic reversibility

The charge/discharge performance of rechargeable aqueous zinc ion batteries (RAZIBs) at high currents is often unsatisfactory due to the cathode preparation process and the use of hydrophobic binders. By adding freeze-drying treatment to the preparation process of the cathodes, MnO2 cathodes with hierarchically porous structures are obtained, which provide additional channels for ion transfer, thus greatly enhancing the charge/discharge performance in aqueous Zn-MnO2 batteries.

Trivalent Indium Metal as a High-Capacity, High-Efficiency, Low-Polarization, and Long-Cycling Anode for Aqueous Batteries

Aqueous batteries using multivalent metals hold great promise for energy storage due to their low cost, high energy, and high safety. Presently, divalent metals (zinc, iron, nickel, and manganese) prevail as the leading choice, which, however, suffer from low Coulombic efficiency or dendrite growth. In stark contrast, trivalent metals have received rare attention despite their capability to unlock unique redox reactions. Herein, we investigate trivalent indium as an innovative and high-performance metal anode for aqueous batteries. The three-electron In3+/In redox endows a high capacity of ∼700 mAh g-1, on par with the Zn metal. Besides, indium exhibits a suitable redox potential (-0.34 V vs standard hydrogen electrode) and dendrite-free plating process, which renders an ultrahigh Coulombic efficiency of 99.3-99.8%. More surprisingly, it features an exceedingly low polarization of 1 mV in symmetrical cells, which is 1-2 orders of magnitude lower than any reported metals. The In-MnO2 full cell also delivers impressive performance, with a cell voltage of ∼1.2 V, a high capacity of ∼330 mAh g-1, and a long cycling time of 680 cycles. Our work exemplifies the efficacy of exploiting trivalent metals as an excellent metal anode, which provides an exciting direction for building high-performance aqueous batteries.

Mechanism of Chalcophanite Nucleation in Zinc Hydroxide Sulfate Cathodes in Aqueous Zinc Batteries

Aqueous Zn-ion batteries with MnO2-based cathodes have seen significant attention owing to their high theoretical capacities, safety, and low cost; however, much debate remains regarding the reaction mechanism that dominates energy storage. In this work, we report our electron microscopy study of cathodes containing zinc hydroxide sulfate (Zn4SO4(OH)6·xH2O, ZHS) together with carbon nanotubes cycled in electrolytes containing ZnSO4 with varied amounts of MnSO4 incorporated. The primary Mn-containing phase is formed in situ in the cathode during cycling, where a dissolution-deposition reaction is identified between ZHS and chalcophanite (ZnMn3O7·3H2O). Mechanistic details of this reaction, in which the chalcophanite nucleates then separates from the ZHS flakes as the ZHS dissolves while acting as the primary Zn source for the reaction, are revealed using surface sensitive methods. These findings indicate the reaction is local to the ZHS flakes, providing new insight toward the importance of ZHS and the cathode microstructure.

A Liquid Metal Microdroplets Initialized Hemicellulose Composite for 3D Printing Anode Host in Zn-Ion Battery

Maintaining a steady affinity between gallium-based liquid metals (LM) and polymer binders, particularly under continuous mechanical deformation, such as extrusion-based 3D printing or plating/stripping of Zinc ion (Zn²⁺ ), is very challenging. Here, an LM-initialized polyacrylamide-hemicellulose/EGaIn microdroplets hydrogel is used as a multifunctional ink to 3D-print self-standing scaffolds and anode hosts for Zn-ion batteries. The LM microdroplets initiate acrylamide polymerization without additional initiators and cross-linkers, forming a double-covalent hydrogen-bonded network. The hydrogel acts as a framework for stress dissipation, enabling recovery from structural damage due to the cyclic plating/stripping of Zn²⁺ . The LM-microdroplet-initialized polymerization with hemicelluloses can facilitate the production of 3D printable inks for energy storage devices.

Complementary Operando Electrochemical Quartz Crystal Microbalance and UV/Vis Spectroscopic Studies: Acetate Effects on Zinc-Manganese Batteries

Zinc-ion batteries, in which zinc ions and protons do intercalation and de-intercalation during battery cycling with various proposed mechanisms under debate, have been studied. Recently, electrolytic zinc-manganese batteries, exhibiting the pure dissolution-deposition behavior with a large charge capacity, have been accomplished through using electrolytes with Lewis acid. However, the complicated chemical environment and mixed products hinder the investigation though it is crucial to understand the detailed mechanism. Here, cyclic voltammetry coupled electrochemical quartz crystal microbalance (EQCM) and ultraviolet-visible spectrophotometry (UV-Vis) are respectively, for the very first time, used to study the transition from zinc-ion batteries to zinc electrolytic batteries by the continuous addition of acetate ions. These complementary techniques operando trace the mass and the composition evolution. The observed formation and dissolution of zinc hydroxide sulfate (ZHS) and manganese oxides evince the effect of acetate ions on zinc-manganese batteries from an alternative perspective. Both the amount of acetate and the pH value have large impacts on the capacity and Coulombic efficiency of the MnO₂ electrode, and thus they should be optimized when constructing a full zinc-manganese battery with high rate capability and reversibility.

Rational Design of Flexible Zn-Based Batteries for Wearable Electronic Devices

The advent of 5G and the Internet of Things has spawned a demand for wearable electronic devices. However, the lack of a suitable flexible energy storage system has become the "Achilles' Heel" of wearable electronic devices. Additional problems during the transformation of the battery structure from conventional to flexible also present a severe challenge to the battery design. Flexible Zn-based batteries, including Zn-ion batteries and Zn-air batteries, have long been considered promising candidates due to their high safety, eco-efficiency, substantial reserve, and low cost. In the past decade, researchers have come up with elaborate designs for each portion of flexible Zn-based batteries to improve the ionic conductivities, mechanical properties, environment adaptabilities, and scalable productions. It would be helpful to summarize the reported strategies and compare their pros and cons to facilitate further research toward the commercialization of flexible Zn-based batteries. In this review, the current progress in developing flexible Zn-based batteries is comprehensively reviewed, including their electrolytes, cathodes, and anodes, and discussed in terms of their synthesis, characterization, and performance validation. By clarifying the challenges in flexible Zn-based battery design, we summarize the methodology from previous investigations and propose challenges for future development. In the end, a research paradigm of Zn-based batteries is summarized to fit the burgeoning requirement of wearable electronic devices in an iterative process, which will benefit the future development of Zn-based batteries.

Proton-Trapping Agent for Mitigating Hydrogen Evolution Corrosion of Zn for an Electrolytic MnO2/Zn Battery

A rechargeable aqueous electrolytic MnO₂/Zn battery (EMZB) based on a reversible Mn²⁺/MnO₂ two-electron redox reaction in an acidic electrolyte is very attractive for large-scale energy storage due to its high output voltage, large gravimetric capacity, and low cost. However, severe hydrogen evolution corrosion (HEC) of the Zn anode in an acidic electrolyte limits its application. Here, a proton-trapping agent (PTA) is introduced in the electrolyte to improve the electrochemical performance of the EMZB. Experimental results and theoretical calculations demonstrate that HEC of the Zn electrode can be effectively mitigated through high binding energy between the protons and PTA. The optimized EMZB regulated by a PTA of acetate (EMZB-20% Ac) delivers a high discharge voltage of 1.91 V and over 400 stable cycles at 1 C, which is more than 5 times the cycle life of the battery without PTA. EMZB-20% Ac also shows a Coulombic efficiency of 90.7% at a high areal capacity of 8 mAh cm^-2 and an energy retention of 83.6% after 1000 cycles at 5 C with an areal capacity of 1 mAh cm^-2. This work provides a promising electrolyte regulation strategy for the design and application of a high-performance EMZB and other energy storage systems.

Biodegradable Gel Electrolyte Suppressing Water-Induced Issues for Long-Life Zinc Metal Anodes

Owing to the inherent properties of aqueous electrolytes, aqueous zinc-ion batteries are considered to be a promising energy storage system. Unfortunately, the water-induced issues, such as hydrogen evolution and corrosion reaction, inevitably occur on the Zn anode surface during cycling, which leads to poor electrochemical performance. The gel polymer electrolyte would reduce the parasitic reactions associated with water. However, the nondegradable polymer is harmful to the environment. Herein, with the aim to alleviate the serious issues derived from water and environmental problems, a biodegradable gum arabic has been proposed to serve as a hydrogel electrolyte for aqueous zinc-ion batteries. The electrochemical activity of water could be reduced by the hydrogen-bond network between the gum arabic and water. Thus, the corrosion and hydrogen evolution reaction (HER) can be restrained by employing the prepared gel electrolyte. Evidenced by the online mass spectrometry, it is found that the less produced H₂ is detected in the biodegradable gel electrolyte-based Zn||Zn symmetric cell during the processes of Zn plating/stripping, showing the inhibited HER. Moreover, the by-product on the Zn anode is barely observed during cycling when using the obtained gel electrolyte. Uniform zinc-ion distribution can be achieved to mitigate Zn dendrite growth in the gel electrolyte. Therefore, the Zn||Zn symmetric cell based on the gel electrolyte exhibits a long lifespan of more than 1300 h, which is longer than that in the aqueous electrolyte. Moreover, the Zn||LiFePO₄ hybrid ion battery based on the gel electrolyte shows improved capacity retention by suppressing the reactions related to water.

Reunderstanding the Reaction Mechanism of Aqueous Zn-Mn Batteries with Sulfate Electrolytes: Role of the Zinc Sulfate Hydroxide

Rechargeable aqueous Zn-Mn batteries have garnered extensive attention for next-generation high-safety energy storage. However, the charge-storage chemistry of Zn-Mn batteries remains controversial. Prevailing mechanisms include conversion reaction and cation (de)intercalation in mild acid or neutral electrolytes, and a MnO₂ /Mn²⁺ dissolution-deposition reaction in strong acidic electrolytes. Herein, a Zn₄ SO₄ ·(OH)₆ ·xH₂ O (ZSH)-assisted deposition-dissolution model is proposed to elucidate the reaction mechanism and capacity origin in Zn-Mn batteries based on mild acidic sulfate electrolytes. In this new model, the reversible capacity originates from a reversible conversion reaction between ZSH and Zn_x MnO(OH)₂ nanosheets in which the MnO₂ initiates the formation of ZSH but contributes negligibly to the apparent capacity. The role of ZSH in this new model is confirmed by a series of operando characterizations and by constructing Zn batteries using other cathode materials (including ZSH, ZnO, MgO, and CaO). This research may refresh the understanding of the most promising Zn-Mn batteries and guide the design of high-capacity aqueous Zn batteries.

A highly compressible hydrogel electrolyte for flexible Zn-MnO2 battery

Compressibility of zinc-manganese oxide (Zn-MnO₂) batteries is an essential element of modern flexible electronics. Hydrogel electrolytes with superior elasticity and compressibility are highly demand to guarantee a stable energy output of the flexible Zn-MnO₂ battery. Herein, a highly compressible hydrogel electrolyte was developed by introducing soybean protein isolate nanoparticles (SPI) into covalently cross-linked polyacrylamide (PAAM) polymer networks. The SPI/PAAM hydrogel electrolyte for Zn-MnO₂ battery possessed outstanding reversible compressibility due to the aggregation of SPI nanoparticles on the PAAM chains through the weak electrostatic interaction, which could dissipate energy effectively. Consequently, the Zn-MnO₂ battery based on the compressible hydrogel electrolyte displayed a decent specific capacity (299.3 mA h g^-1) and desirable capacity retention rate (78.2%) after 500 charge/discharge cycles. Notably, the device could maintain stable power output under 96% compress strain and light the bulb even under severe mechanical stimulation like being-bent and hammered. It's believed that the compressible Zn-MnO₂ batteries hold enormous potential as the energy storage devices in the field of flexible wearable electronics.

Effect and mechanism of Lenvatinib@H-MnO2-FA drug delivery system in targeting intrahepatic cholangiocarcinoma

BACKGROUND

To investigate the effects of the Lenvatinib@H-MnO2-FA administration system on the proliferation and apoptosis of Intrahepatic cholangiocarcinoma (ICC) and the underlying molecular mechanism.

MATERIALS AND METHODS

In this research, hollow MnO2 (H-MnO2) was synthesized via the modified Stöber method, and H-MnO2 was modified with polyethylene glycol-bis (Amine) (NH2-PEG-NH2) and folic acid (FA) to obtain H-MnO2-PEG-FA (H-MnO2-FA). Lenvatinib was coated in the hollow cavity of H-MnO2-PEG-FA to further form a nanometre drug-carrying system (lenvatinib@H-MnO2-PEG-FA). Lenvatinib@H-MnO2-FA was characterized through transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Fourier transform infrared spectroscopy (FT-IR) was used to verify that Lenvatinib was loaded on nanoparticles. Functionally, confocal laser scanning microscopy (CLSM), 2-(4-Amidinophenyl)-6-indolecarbamidine dihydrochloride (DAPI) staining, and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay were performed to determine the effect of lenvatinib@H-MnO2-FA on the proliferation and apoptosis of ICC cells (9810 cells). Finally, the protein levels of Raf-1MEK1/2-ERK1/2 signalling pathway components were detected through Western blotting analysis.

RESULTS

We successfully synthesised a Lenvatinib@H-MnO2-PEG-FA administration system. The resulting nanomaterials had excellent biological stability and improved targeting effects. Functionally, lenvatinib@H-MnO2-FA inhibited the proliferation of 9810 cells. The Bcl-2 protein level was significantly downregulated, and the caspase-3 protein level was significantly upregulated, indicating that lenvatinib@H-MnO2-PEG-FA promoted the apoptosis of 9810 cells. Mechanistically, Lenvatinib@H-MnO2-FA increased the phosphorylation levels of Raf, MEK1/2 and ERK1/2.

CONCLUSIONS

H-MnO2-FA can more effectively deliver Lenvatinib to inhibit proliferation and promote apoptosis in ICC, could be the promising drug delivery nano-vehicles for delivery drugs.

Interfacial Engineering Strategy for High-Performance Zn Metal Anodes

Due to their high safety and low cost, rechargeable aqueous Zn-ion batteries (RAZIBs) have been receiving increased attention and are expected to be the next generation of energy storage systems. However, metal Zn anodes exhibit a limited-service life and inferior reversibility owing to the issues of Zn dendrites and side reactions, which severely hinder the further development of RAZIBs. Researchers have attempted to design high-performance Zn anodes by interfacial engineering, including surface modification and the addition of electrolyte additives, to stabilize Zn anodes. The purpose is to achieve uniform Zn nucleation and flat Zn deposition by regulating the deposition behavior of Zn ions, which effectively improves the cycling stability of the Zn anode. This review comprehensively summarizes the reaction mechanisms of interfacial modification for inhibiting the growth of Zn dendrites and the occurrence of side reactions. In addition, the research progress of interfacial engineering strategies for RAZIBs is summarized and classified. Finally, prospects and suggestions are provided for the design of highly reversible Zn anodes.

Al-doped α-MnO2 coated by lignin for high-performance rechargeable aqueous zinc-ion batteries

Zn/MnO2 batteries, one of the most widely studied rechargeable aqueous zinc-ion batteries, suffer from poor cyclability because the structure of MnO2 is labile with cycling. Herein, the structural stability of α-MnO2 is enhanced by simultaneous Al3+ doping and lignin coating during the formation of α-MnO2 crystals in a hydrothermal process. Al3+ enters the [MnO6] octahedron accompanied by producing oxygen vacancies, and lignin further stabilizes the doped Al3+ via strong interaction in the prepared material, Al-doped α-MnO2 coated by lignin (L + Al@α-MnO2). Meanwhile, the conductivity of L + Al@α-MnO2 improves due to Al3+ doping, and the surface area of L + Al@α-MnO2 increases because of the production of nanorod structures after Al3+ doping and lignin coating. Compared with the reference α-MnO2 cathode, the L + Al@α-MnO2 cathode achieves superior performance with durably high reversible capacity (∼180 mA h g-1 at 1.5 A g-1) and good cycle stability. In addition, ex situ X-ray diffraction characterization of the cathode at different voltages in the first cycle is employed to study the related mechanism on improving battery performance. This study may provide ideas of designing advanced cathode materials for other aqueous metal-ion batteries.

Improving the capacity of zinc-ion batteries through composite defect engineering

Aqueous zinc-ion batteries (ZIB) are favored because of their low cost and high safety. However, as the most widely used cathodes, the rate performance and long-term cycle performance of manganese-based oxides are very worrying, which greatly affects their commercialization. Here, MnO₂ with composite defects of cation doping and oxygen vacancies was synthesized for the first time. Cation doping promoted the diffusion and transport of H⁺ and oxygen vacancies weakened the zinc–oxygen bond, allowing more electrons to be added to the charge and discharge process. The combination of these makes α-MnO₂ obtain a specific capacity of up to 346 mA h g⁻¹. This inspired us to use different combinations of defect engineering strategies on the materials which can be implemented as a potential method to improve performance for the modification of ZIB cathode materials, such as cation vacancies and anion doping.

The composite defect engineering changes the morphology of α-MnO₂ and improves the electrochemical performance, which is better than the material with single defect.

Self-Assembling Films of Covalent Organic Frameworks Enable Long-Term, Efficient Cycling of Zinc-Ion Batteries

Despite their safety, nontoxicity, and cost-effectiveness, zinc aqueous batteries still suffer from limited rechargeability and poor cycle life, largely due to spontaneous surface corrosion and formation of large Zn dendrites by irregular and uneven plating and stripping. In this work, these untoward effects are minimized by covering Zn electrodes with ultrathin layers of covalent organic frameworks, COFs. These nanoporous and mechanically flexible films form by self-assembly-via the straightforward and scalable dip-coating technique-and permit efficient mass and charge transport while suppressing surface corrosion and growth of large Zn dendrites. The batteries demonstrated have excellent capacity retention and stable polarization voltage for over 420 h of cycling at 1 mA cm^-2 . The COF films essential for these improvements can be readily deposited over large areas and curvilinear supports, enabling, for example, foldable wire-type batteries.

Regulating Zn Deposition via an Artificial Solid-Electrolyte Interface with Aligned Dipoles for Long Life Zn Anode

Highlights

An artificial solid–electrolyte interface composed of a perovskite type material, BaTiO3, is introduced to Zn anode surface in aqueous zinc ion batteries. The BaTiO3 layer endowing inherent character of the switched polarization can regulate the interfacial electric field at anode/electrolyte interface. Zn dendrite can be restrained, and Zn metal batteries based on BaTiO3 layer show stable cycling.

Abstract

Aqueous zinc ion batteries show prospects for next-generation renewable energy storage devices. However, the practical applications have been limited by the issues derived from Zn anode. As one of serious problems, Zn dendrite growth caused from the uncontrollable Zn deposition is unfavorable. Herein, with the aim to regulate Zn deposition, an artificial solid–electrolyte interface is subtly engineered with a perovskite type material, BaTiO3, which can be polarized, and its polarization could be switched under the external electric field. Resulting from the aligned dipole in BaTiO3 layer, zinc ions could move in order during cycling process. Regulated Zn migration at the anode/electrolyte interface contributes to the even Zn stripping/plating and confined Zn dendrite growth. As a result, the reversible Zn plating/stripping processes for over 2000 h have been achieved at 1 mA cm−2 with capacity of 1 mAh cm−2. Furthermore, this anode endowing the electric dipoles shows enhanced cycling stability for aqueous Zn-MnO2 batteries. The battery can deliver nearly 100% Coulombic efficiency at 2 A g−1 after 300 cycles.

Supplementary Information

The online version of this article (10.1007/s40820-021-00599-2).

Enhanced reversibility and electrochemical window of Zn-ion batteries with an acetonitrile/water-in-salt electrolyte

An acetonitrile/water-in-salt (AWIS) hybrid electrolyte was developed for Zn-ion batteries. Compared to conventional aqueous electrolytes, the AWIS hybrid electrolyte prolonged the lifespan of Zn|Zn cells from 150 to 2500 h and increased the upper cut-off voltage from 1.8 to 2.2 V for Zn-MnO2 batteries. This new AWIS hybrid electrolyte is expected to enhance the energy and power density of Zn-based batteries for large-scale grid storage.

Boosting the Energy Density of Aqueous Batteries via Facile Grotthuss Proton Transport

The recent developments in rechargeable aqueous batteries have witnessed a burgeoning interest in the mechanism of proton transport in the cathode materials. Herein, for the first time, we report the Grotthuss proton transport mechanism in α-MnO₂ which features wide [2×2] tunnels. Exemplified by the substitution doping of Ni (≈5 at.%) in α-MnO₂ that increases the energy density of the electrode by ≈25 %, we reveal a close link between the tetragonal-orthorhombic (TO) distortion of the lattice and the diffusion kinetics of protons in the tunnels. Experimental and theoretical results verify that Ni dopants can exacerbate the TO distortion during discharge, thereby facilitating the hydrogen bond formation in bulk α-MnO₂ . The isolated direct hopping mode of proton transport is switched to a facile concerted mode, which involves the formation and concomitant cleavage of O-H bonds in a proton array, namely via Grotthuss proton transport mechanism. Our study provides important insight towards the understanding of proton transport in MnO₂ and can serve as a model for the compositional design of cathode materials for rechargeable aqueous batteries.

A Review of the Use of GPEs in Zinc-Based Batteries. A Step Closer to Wearable Electronic Gadgets and Smart Textiles

With the flourish of flexible and wearable electronics gadgets, the need for flexible power sources has become essential. The growth of this increasingly diverse range of devices boosted the necessity to develop materials for such flexible power sources such as secondary batteries, fuel cells, supercapacitors, sensors, dye-sensitized solar cells, etc. In that context, comprehensives studies on flexible conversion and energy storage devices have been released for other technologies such Li-ion standing out the importance of the research done lately in GPEs (gel polymer electrolytes) for energy conversion and storage. However, flexible zinc batteries have not received the attention they deserve within the flexible batteries field, which are destined to be one of the high rank players in the wearable devices future market. This review presents an extensive overview of the most notable or prominent gel polymeric materials, including biobased polymers, and zinc chemistries as well as its practical or functional implementation in flexible wearable devices. The ultimate aim is to highlight zinc-based batteries as power sources to fill a segment of the world flexible batteries future market.

A first-principles investigation of α, β, and γ-MnO2 as potential cathode materials in Al-ion batteries

An inexpensive and eco-friendly alternative energy storage solution is becoming more in demand as the world moves towards greener technology. We used first principles calculations to investigate α, β, and γ-MnO₂ and their Al-ion intercalation mechanism in potential applications for aluminum batteries. We explored these complexes through investigating properties such as volume change, binding/diffusion energy, and band gap to gauge each material. α-MnO₂ had almost no volume change. γ-MnO₂ had the lowest binding energy and diffusion barrier. Our study gives insight into the feasibility of using MnO₂ in aluminum batteries and guides investigation of the material within its different phases.

An inexpensive and eco-friendly alternative energy storage solution is becoming more in demand as the world moves towards greener technology.

Hybrid Hydrogel Electrolyte Based on Metal-Organic Supermolecular Self-Assembly and Polymer Chemical Cross-Linking for Rechargeable Aqueous Zn-MnO2 Batteries

Multifunctional metal-organic supramolecular hydrogels have achieved great progress nowadays. However, their applications in aqueous batteries for flexible energy storage devices remain limited due to their unsatisfactory mechanical properties. Here, we report a rapid formation of supramolecular hydrogel by adenosine 5'-monophosphate (AMP) and manganese ions (Mn²⁺). Additionally, the AMP-Mn hydrogel is combined with chemical cross-linking poly(vinyl alcohol) (PVA) polymer networks to form an AMP-Mn/PVA hybrid hydrogel, which effectively solves the problems with regard to the mechanical properties and stability of metal-organic supramolecular hydrogels as well as self-healing of tough chemical cross-linking polymer networks. The AMP-Mn/PVA hybrid hydrogel served as the hydrogel electrolyte to fabricate flexible Zn-MnO₂ batteries, which exhibit fast ion conductivity, excellent electrochemical stability, and robust mechanical strength, indicating feasible practical application prospects. This investigation provides a promising opportunity for the application of metal-organic supramolecular hydrogels in the field of energy storage.