Molten salt-confined pyrolysis towards carbon nanotube-backboned microporous carbon for high-energy-density and durable supercapacitor electrodes

Study on fabrication of force transducer based on carbon nano-flake balls

The purpose of this study was to fabricate a force sensor. A novel three-dimensional carbon-based material called a carbon nano-flake ball (CNFB) was used because it exhibits a large surface-area and high electrical conductivity. Moreover, CNFB can be easily fabricated using a one-step process via microwave plasma chemical vapor deposition. In the present study, two different methods, chemical and mechanical exfoliation, were used to fabricate the CNFB thin films. CNFEs were successfully synthesized on the silicon-based composite substrate. The substrate was constructed by the Si, SiO2, and Al2O3, where Al2O3played the role of the substrate for the force sensor while SiO2was the interface layer and was removed in the process by hydrogen fluoride (HF) solution to separate Al2O3from Silicon. The experiments showed that using sol-gel catalyst coating as pretreatment precursor, results in a larger ball-size but lower deposition density of CNFB on Al2O3substrate. By using mechanical exfoliation by polyimide (PI) tape, the CNFB grown on silicon substrate can be easily exfoliated from the substrate. PI/CNFB was successfully exfoliated from the substrate with a silver-grey color at the bottom of the CNFB which is likely to be silicon carbide (SiC) from the energy dispersive spectrometer analysis. The sheet resistance of PI/CNFB was 18.3 ± 1.0 Ω sq.-1PI/CNFB exhibits a good force sensing performance with good stability after 10 times of loading-unloading cycles and a good sensitivity of 11.6 Ω g-1.

Design of ZIF-67 nanoflake derived NiCo-LDH/rGO hybrid nanostructures for aqueous symmetric supercapattery application under alkaline condition

Well-defined polyhedral ZIF-67 metal-organic frameworks (MOFs) are usually synthesized using methanol as solvent. In this work, methanol is replaced with deionized water as a solvent to synthesize ZIF-67 MOFs with unique nanoflake morphology. The ZIF-67 nanoflakes are synthesized directly byin situmethod on reduced graphene oxide (rGO) to obtain ZIF-67/rGO-xprecursors which are further transformed into NiCo-layered double hydroxide nanocomposites (NiCo-LDH/rGO-x,x = 10, 30, 50 and 90 mg of rGO). The NiCo-LDH/rGO-xnanostructured composites are found to be excellent materials for battery type supercapacitor (supercapattery) applications. Among these samples, the NiCo-LDH/rGO-30 composite gives maximum specific capacity of 829 C g^-1(1658 F g^-1) at a current density of 1 A g^-1and high rate capability. The as fabricated 2-electrode symmetric Swagelok deviceNiCo-LDH/rGO-30NiCo-LDH/rGO-30delivered a high energy density of 49.2 Wh kg^-1and a power density of 4511 W kg^-1, and enabled us to glow red, blue and white LED bulbs using three coin cells. The device can show good capacity retention even after 3000 continuous charge-discharge cycles. The NiCo-LDH/rGO-30 composite,in situderived from ZIF-67 MOF in combination with optimal amount of rGO, is an excellent material to deliver both high energy density and high power density in supercapattery devices.

Evaluation of the Synergistic Effect of Graphene Oxide Sheets and Co3O4 Wrapped with Vertically Aligned Arrays of Poly (Aniline-Co-Melamine) Nanofibers for Energy Storage Applications

In the present study, Co3O4 and graphene oxide (GO) are used as reinforcement materials in a copolymer matrix of poly(aniline-co-melamine) to synthesize ternary composites. The nanocomposite was prepared by oxidative in-situ polymerization and used as an electrode material for energy storage. The SEM images revealed the vertically aligned arrays of copolymer nanofibers, which entirely wrapped the GO sheets and Co3O4 nanoparticles. The EDX and mapping analysis confirmed the elemental composition and uniform distribution in the composite. The XRD patterns unveiled composites' phase purity and crystallinity through characteristic peaks appearing at their respective 2θ values in the XRD spectrum. The FTIR spectrums endorse the successful synthesis of composites, whereas TGA analysis revealed the higher thermal stability of composites. The cyclic voltammetry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy are employed to elucidate the electrochemical features of electrodes. The ternary composite PMCoG-2 displayed the highest specific capacity of 134.36 C/g with 6 phr of GO, whereas PMCoG-1 and PMCoG-3 exhibited the specific capacities of 100.63 and 118.4 C/g having 3 phr and 12 phr GO at a scan rate of 0.003 V/s, respectively. The best electrochemical performance of PMCoG-2 is credited to the synergistic effect of constituents of the composite material.

Solid-State Reaction Synthesis of Nanoscale Materials: Strategies and Applications

Nanomaterials (NMs) with unique structures and compositions can give rise to exotic physicochemical properties and applications. Despite the advancement in solution-based methods, scalable access to a wide range of crystal phases and intricate compositions is still challenging. Solid-state reaction (SSR) syntheses have high potential owing to their flexibility toward multielemental phases under feasibly high temperatures and solvent-free conditions as well as their scalability and simplicity. Controlling the nanoscale features through SSRs demands a strategic nanospace-confinement approach due to the risk of heat-induced reshaping and sintering. Here, we describe advanced SSR strategies for NM synthesis, focusing on mechanistic insights, novel nanoscale phenomena, and underlying principles using a series of examples under different categories. After introducing the history of classical SSRs, key theories, and definitions central to the topic, we categorize various modern SSR strategies based on the surrounding solid-state media used for nanostructure growth, conversion, and migration under nanospace or dimensional confinement. This comprehensive review will advance the quest for new materials design, synthesis, and applications.

Transition Metal Oxide Electrode Materials for Supercapacitors: A Review of Recent Developments

In the past decades, the energy consumption of nonrenewable fossil fuels has been increasing, which severely threatens human life. Thus, it is very urgent to develop renewable and reliable energy storage devices with features of environmental harmlessness and low cost. High power density, excellent cycle stability, and a fast charge/discharge process make supercapacitors a promising energy device. However, the energy density of supercapacitors is still less than that of ordinary batteries. As is known to all, the electrochemical performance of supercapacitors is largely dependent on electrode materials. In this review, we firstly introduced six typical transition metal oxides (TMOs) for supercapacitor electrodes, including RuO₂, Co₃O₄, MnO₂, ZnO, XCo₂O₄ (X = Mn, Cu, Ni), and AMoO₄ (A = Co, Mn, Ni, Zn). Secondly, the problems of these TMOs in practical application are presented and the corresponding feasible solutions are clarified. Then, we summarize the latest developments of the six TMOs for supercapacitor electrodes. Finally, we discuss the developing trend of supercapacitors and give some recommendations for the future of supercapacitors.

Construction of hierarchical layered hydroxide grown in situ on carbon tubes derived from a metal-organic framework for asymmetric supercapacitors

Electrode materials are very important for the performance of supercapacitors (SCs). Therefore, preparation of hybrid electrode materials is an effective way to develop high-performance SCs. We firstly design and prepare metal organic framework (MOF) derived carbon nanotubes as the core skeleton to support the shell of a nickel gallium layered hydroxide nanosheet (NiGa-LDH). MOF derived carbon nanomaterials have high conductivity and a large specific surface area, which can promote electron transfer and improve the agglomeration of LDH. The deposited LDH can provide high specific capacitance and the layered structure can further enhance the reaction site. The NiGa-LDH@CNT-500@CC has an excellent specific capacitance of 2580 F g-1 at 1 A g-1 and a high capacitance retention rate of 83.3% at 5 A g-1 due to the synergistic effect of two materials. The assembled NiGa-LDH@CNT-500@CC//carbon NS asymmetric supercapacitor (ASC) has an operating voltage of 1.6 V and a high energy density of 52 W h kg-1 at a power density of 952 W kg-1. Therefore, the core-shell structure composed of LDH and carbon nanomaterials provides an effective way for the design of high-performance electrodes.