Sensitized photomodification of single-stranded DNA by a binary system of oligonucleotide conjugates

Two-component covalent inhibitor

Inhibitors that covalently damage proteins or nucleic acids offer great potency, but are difficult to rationally design and suffer from poor specificity. Here we outline a general concept for constructing covalent inhibitors, called the two-component covalent inhibitor (TCCI). The approach takes advantage of two ligand analogs equipped with pre-reactive groups. Binding of the analogs to the adjacent sites of a target biopolymer brings the pre-reactive groups in close proximity and causes their interaction followed by covalent damage of the target. In the present study we used light-activated pre-reactive groups to inactivate a DNA polymerase. It was found that the efficiency of a traditional single-component inhibitor was greatly reduced in the presence of a non-target protein, while the TCCI was not significantly affected. Our findings suggest that TCCI approach has advantages in inactivation of biopolymers in complex multi-component systems.

Porphyrin-related photosensitizers for cancer imaging and therapeutic applications

A photosensitizer is defined as a chemical entity, which upon absorption of light induces a chemical or physical alteration of another chemical entity. Some photosensitizers are utilized therapeutically such as in photodynamic therapy (PDT) and for diagnosis of cancer (fluorescence diagnosis, FD). PDT is approved for several cancer indications and FD has recently been approved for diagnosis of bladder cancer. The photosensitizers used are in most cases based on the porphyrin structure. These photosensitizers generally accumulate in cancer tissues to a higher extent than in the surrounding tissues and their fluorescing properties may be utilized for cancer detection. The photosensitizers may be chemically synthesized or induced endogenously by an intermediate in heme synthesis, 5-aminolevulinic acid (5-ALA) or 5-ALA esters. The therapeutic effect is based on the formation of reactive oxygen species (ROS) upon activation of the photosensitizer by light. Singlet oxygen is assumed to be the most important ROS for the therapeutic outcome. The fluorescing properties of the photosensitizers can be used to evaluate their intracellular localization and treatment effects. Some photosensitizers localize intracellularly in endocytic vesicles and upon light exposure induce a release of the contents of these vesicles, including externally added macromolecules, into the cytosol. This is the basis for a novel method for macromolecule activation, named photochemical internalization (PCI). PCI has been shown to potentiate the biological activity of a large variety of macromolecules and other molecules that do not readily penetrate the plasma membrane, including type I ribosome-inactivating proteins, immunotoxins, gene-encoding plasmids, adenovirus, peptide-nucleic acids and the chemotherapeutic drug bleomycin. The background and present status of PDT, FD and PCI are reviewed.

Superselective labelling of proteins: approaches and techniques

Affinity labelling is a popular method used for the study of macromolecules and their interactions with ligands. The method is based on the targeted delivery of a chemically cross-linkable group, attached to a reactive molecule with affinity for a particular site in the biopolymer of interest. In complex multicomponent systems, the applications of affinity labelling are restricted by the tendency of the reagents to randomly label nontargetted molecules. This review highlights techniques developed to minimize non-specific cross-linking and to achieve high selectivity for the labelling of target protein. Such techniques might be termed 'superselective labelling', as opposed to traditional, less selective approaches.

CD and melting curves structural studies of the tandem DNA complex formed with oligonucleotides carrying photoactive and sensitizing groups in the nick region

Photoactive derivatives of oligonucleotides are widely used as affinity reagents for the study of structures and functions of nucleic acids and proteins. Between them the binary reagents are the more attractive in the last time. They represent the tandem of two oligonucleotide derivatives complementary to a target sequence and carrying photoactive and sensitizing groups. The efficiency of target modification in this case depends on the mutual arrangement in the nick region of photoactive and sensitizing groups, attached to the oligonucleotides. The use of binary reagents in affinity modification permits to reach the high selectivity of the process. In this work we report our studies on the thermodynamic and structural peculiarities of complementary tandem complex between DNA target and binary oligonucleotide reagent. The complex consisted of the target d(TTGAAGGGGACCGC)and two 7-mer oligonucleotide conjugates,one of which was modified on its 3'-phosphate with a photoreactive p-azidote-trafluorobenzaldehydehydrazone-group,and the other one was linked through its 5'-phosphate to a sensitizing perylene-group. Optical melting curves and thermal changes in circular dichroism (CD)spectra were detected for all possible oligonucleotide and/or conjugate combinations.In addition,molecular modeling simulation of the complex structure was carried out. It was found that CD spectra did not show serious changes in the B-helix structure of the duplex. The interaction between perylene-and azido-groups at the oligonucleotide junction led to considerable increase in duplex stability. CD and molecular modeling data clearly indicated that perylene-group interacted with the duplex in an intercalative manner,but azido-group located on the side of DNA chain minor groove.

A binary system of photoreagents for high-efficiency labeling of DNA polymerases

To increase the efficiency of photoaffinity labeling of DNA polymerases, a binary system of photoaffinity reagents was applied. Photoreactive radioactive primers were synthesized by DNA polymerases beta (pol beta) or DNA polymerase from Thermus thermophilus (pol Tte) using a template-primer duplex in the presence of a dTTP analogue containing 4-azidotetrafluorobenzoyl group linked via spacers of varying length to 5-position of uridine ring- 5-[N-(2,3,5,6-tetrafluoro-4-azidobenzoyl)-amino-trans-propenyl-1]-2'-deoxyuridine-5'-triphosphate (FAB-4-dUTP) or 5-[N-[[(2,3,5,6-tetrafluoro-4-azidobenzoyl)-butanoyl]-amino]-trans-3-aminopropenyl-1]-2'-deoxyuridine-5'-triphosphate (FAB-9-dUTP). The reaction mixtures were UV irradiated (lambda = 365-450 nm) in the absence or presence of a dTTP analog, containing a pyrene moiety-5-[N-(4-(1-pyrenyl)-butylcarbonyl)-amino-trans-propenyl-1]-2'-deoxyuridine-5'-triphosphate (Pyr- 8-dUTP) or 5-[N-(4-(1-pyrenyl)-ethylcarbonyl)-amino-trans-propenyl-1]-2'-deoxyuridine-5'-triphosphate (Pyr-6-dUTP). The most efficient crosslinking of both DNA polymerases was observed in the case of photoreactive DNA primer, carrying the FAB-4-dUMP moiety at the 3'-end, and Pyr-6-dUTP as a sensitizer. The binary system of photoaffinity reagents allows increasing photoaffinity labeling of the both DNA polymerases in comparison to the primer crosslinking without photosensitizer.

Refined high-field NMR solution structure of a binary-addressed pyrene/perfluoro-azide complementary DNA oligonucleotide system shows extensive distortion in the central nick region

The structural analysis of the photoactivated binary system of complementary-addressing nucleic acid sequences (1:2:3) by high-resolution NMR spectroscopy and restrained molecular dynamics is reported. The binary system comprised a 12 base-pair target DNA sequence, pdGTATCAGTTTCT (1), and two hexanucleotides, (dAGAAACp-L-Az (2) and Pyr-pdTGATAC (3)), complementary to neighbouring sites in the target DNA. Oligonucleotide (2) is conjugated with a p-azidotetrafludrobenzyl group (Az) via a linker group (L), and the other oligonucleotide (3) is equipped with the photosensitizing pyrenyl-1-methylamino group (Pyr). We now extend the structural analysis of 1:2:3, which was previously based on qualitative 2D 1H-NMR data and thermodynamic analysis of complex formation from UV-visible thermal denaturation experiments. In the current work structural refinement was performed by separate molecular dynamics runs for six different starting structures based on 318 proton-proton distance-range constraints, evaluated from the 1H-NOESY spectrum (tau(mix) = 200 ms, 600 MHz) using complete relaxation matrix analysis (NMR/TRIAD/MARDIGRAS). Additional Watson-Crick hydrogen bond restraints were included in the calculations based on the detected signals from the exchangeable protons, using REFOPT(NY) methods. The final averaged structure obtained from the six refined co-ordinate sets showed a considerable degree of axis bend (62.5 degrees) with the bending point in the middle of the duplex in the region of the backbone nick between the two short oligonucleotides. The complex behaves dynamically as the equivalent of two short B-DNA-like duplexes displaying a hinge-like flexing at their junction. In all final structures the Pyr function location was very restricted, the aromatic group lying in the duplex minor groove near residues 4T, 5C and 2T. In contrast, the location of the perfluoroazido group was different in all the final structures, indicating the high flexibility of this group in the duplex. The only feature common to all six final azido group orientations was the outside location on the side of the major groove. The distance between the Pyr and Az groups varied from 11 A to 24 A for the six final structures (17 A, final average structure). The dynamics of duplex denaturation for 1:2:3 was probed by monitoring the temperature-induced NMR line broadening of the imino protons in a 1D variable temperature NMR experiment. The melting of 1:2:3 starts both from the ends and from the middle part of the duplex at the backbone break between the two short oligonucleotides reflecting the destabilisation of the pyrene-arylazido nick region in the duplex.

Structure of photoreactive binary system of oligonucleotide conjugates assembled on the target nucleotide sequence

Recently we have developed an approach to superspecific photomodification of nucleic acids by binary systems of oligonucleotides conjugated to precursor groups capable of assembling into photoactivatable structure upon simultaneous binding of the conjugates to the target. We have investigated the solution structure of a model binary system 1:2:3, where 1 is the target 12-mer 5'-pdGTATCAGTTTCT, 2 is the photoreactive conjugate 5'-dAGAAACp-NH(CH2)2NH-Az and 3 is the sensitizing conjugate 5'-Pyr-pdTGATAC (Az is p-azidotetrafluorobenzoyl group and Pyr is the pyrenyl-1-methylamino group). The photoreaction within this complex results in crosslinking of reagent 2 with N7-position of the G7 residue of the target thus indicating that the photoreactive Az residue is located in the major groove near the G7 residue. The center-to-center distances between the Pyr and Az moieties in complex 1:2:3 independently determined by the Pyr-group fluorescence quenching and the Az-group sensitized photodecomposition were 11.2 and 12.6 A, respectively.

Sensitized photomodification of mammalian DNA polymerase beta. A new approach for highly selective affinity labeling of polymerases

To enhance the specificity of polymerase photoaffinity labeling, a novel approach based on sensitized photomodification has been developed. A base-substituted analog of TTP containing a pyrene group (PyrdUTP) was synthesized and used as an active site-bound photosensitizer for photoaffinity modification of DNA polymerase beta (pol beta). 5'-[32P]-labeled primer was elongated in situ by pol beta with a photoreactive analog of TTP (FAB-4-dUTP). The pyrene sensitizer (PyrdUTP), excited by light (365-450 nm), can activate the photoreagent, cross-linking it to pol beta as a result of fluorescence resonance energy transfer. The initial rate of pol beta photomodification was shown to increase by a factor of ten. The selectivity of pol beta photosensitized modification was proved by adding human replication protein A.