Sterilization-Induced Changes in Surface Topography of Biodegradable POSS-PCLU and the Cellular Response of Human Dermal Fibroblasts

Vascularization Strategies for Porous Polyethylene Implants

Porous polyethylene (pPE) is a frequently implanted biomaterial in craniofacial reconstructive surgery. Its rapid vascularization and tissue incorporation are major prerequisites to prevent complications, such as material infection, migration, and extrusion. To achieve this, several sophisticated strategies have been introduced and evaluated during the last 20 years. These include (i) the angiogenic stimulation of the host tissue with epidermal growth factor, basic fibroblast growth factor or macrophage-activating lipopeptide-2, (ii) material modifications, such as increase of surface roughness and incorporation of bioactive glass particles, (iii) surface coatings with growth factors, glycoproteins, acrylic acid, arginine/glycine/aspartic acid peptide as well as components of the plasminogen activation system and autologous clotted blood or serum, and (iv) the seeding with fibroblasts, chondrocytes, stem cells, or adipose-tissue-derived microvascular fragments. The majority of these approaches showed promising results in experimental studies and, thus, may be capable of improving the success rates after pPE implantation in future clinical practice.

Evaluation of Sterilisation Techniques for Regenerative Medicine Scaffolds Fabricated with Polyurethane Nonbiodegradable and Bioabsorbable Nanocomposite Materials

An effective sterilisation technique that maintains structure integrity, mechanical properties, and biocompatibility is essential for the translation of new biomaterials to the clinical setting. We aimed to establish an effective sterilisation technique for a biodegradable (POSS-PCL) and nonbiodegradable (POSS-PCU) nanocomposite scaffold that maintains stem cell biocompatibility. Scaffolds were sterilised using 70% ethanol, ultraviolet radiation, bleach, antibiotic/antimycotic, ethylene oxide, gamma irradiation, argon plasma, or autoclaving. Samples were immersed in tryptone soya broth and thioglycollate medium and inspected for signs of microbial growth. Scaffold surface and mechanical and molecular weight properties were investigated. AlamarBlue viability assay of adipose derived stem cells (ADSC) seeded on scaffolds was performed to investigate metabolic activity. Confocal imaging of rhodamine phalloidin and DAPI stained ADSCs was performed to evaluate morphology. Ethylene oxide, gamma irradiation, argon plasma, autoclaving, 70% ethanol, and bleach were effective in sterilising the scaffolds. Autoclaving, gamma irradiation, and ethylene oxide led to a significant change in the molecular weight distribution of POSS-PCL and gamma irradiation and ethylene oxide to that of POSS-PCU (p<0.05). UV, ethanol, gamma irradiation, and ethylene oxide caused significant changes in the mechanical properties of POSS-PCL (p<0.05). Argon was associated with significantly higher surface wettability and ADSC metabolic activity (p<0.05). In this study, argon plasma was an effective sterilisation technique for both nonbiodegradable and biodegradable nanocomposite scaffolds. Argon plasma should be further investigated as a potential sterilisation technique for medical devices.

PCL and PCL-based materials in biomedical applications

Biodegradable polymers have met with an increasing demand in medical usage over the last decades. One of such polymers is poly(ε-caprolactone) (PCL), which is a polyester that has been widely used in tissue engineering field for its availability, relatively inexpensive price and suitability for modification. Its chemical and biological properties, physicochemical state, degradability and mechanical strength can be adjusted, and therefore, it can be used under harsh mechanical, physical and chemical conditions without significant loss of its properties. Degradation time of PCL is quite long, thus it is used mainly in the replacement of hard tissues in the body where healing also takes an extended period of time. It is also used at load-bearing tissues of the body by enhancing its stiffness. However, due to its tailorability, use of PCL is not restricted to one type of tissue and it can be extended to engineering of soft tissues by decreasing its molecular weight and degradation time. This review outlines the basic properties of PCL, its composites, blends and copolymers. We report on various techniques for the production of different forms, and provide examples of medical applications such as tissue engineering and drug delivery systems covering the studies performed in the last decades.

Slow chlorine releasing compounds: A viable sterilisation method for bioabsorbable nanocomposite biomaterials

Objective

Selection of the appropriate sterilisation method for biodegradable materials has been a challenging task. Many conventional sterilisation methods are not suitable for the next generation of biomaterials, mainly due to their complex composition, based on nanomaterials, often incorporating bioactive moieties. In this study, we investigate sterilisation efficacy of slow chlorine releasing compound sodium dichloroisocyanurate dihydrate (SDIC) for polyhedral oligomeric silsesquioxane (POSS)-poly(caprolactone urea-urethane) (PCL) scaffolds in comparison with conventional sterilisation methods.

Methods

POSS-PCL scaffolds were subjected to 70% ethanol, UV, and SDIC sterilisation methods. Samples were immersed in tryptone soya broth (TSB) and thioglycollate medium (THY) and after seven days visually inspected for signs of microbial growth. Bulk and surface properties and molecular weight distribution profiles of the scaffolds after sterilization were investigated using FTIR analysis, surface hydrophilicity, scanning electron microscopy analysis, tensile strength testing, and gel-permeation chromatography (GPC). Adipose-derived stem cells (ADSC) were seeded on the scaffolds and AlamarBlue® viability assay was performed to investigate cell metabolic activity. Confocal imaging of rhodamine phalloidin and Dapi stained ADSC on scaffolds was used to demonstrate cell morphology.

Results

GPC results showed that autoclaving led to a significant decrease in the molecular weight of POSS-PCL, whereas ethanol caused visible deformation of the polymer 3D structure and UV radiation did not effectively sterilise the scaffolds. AlamarBlue® analysis showed metabolic activity close to that of tissue culture plastic for ethanol and SDIC.

Conclusion

SDIC sterilisation can be safely applied to biodegradable scaffolds unsuitable for the more common sterilisation methods.

Nanotechnology and bio-functionalisation for peripheral nerve regeneration

There is a high clinical demand for new smart biomaterials, which stimulate neuronal cell proliferation, migration and increase cell-material interaction to facilitate nerve regeneration across these critical-sized defects. This article briefly reviews several up-to-date published studies using Arginine-Glycine-Aspartic acid peptide sequence, nanocomposite based on polyhedral oligomeric silsesquioxane nanoparticle and nanofibrous scaffolds as promising strategies to enhance peripheral nerve regeneration by influencing cellular behaviour such as attachment, spreading and proliferation. The aim is to establish the potent manipulations, which are simple and easy to employ in the clinical conditions for nerve regeneration and repair.

A potential platform for developing 3D tubular scaffolds for paediatric organ development

Children suffer from damaged or loss of hollow organs i.e. trachea, oesophagus or arteries from birth defects or diseases. Generally these organs possess an outer matrix consisting of collagen, elastin, and cells such as smooth muscle cells (SMC) and a luminal layer consisting of endothelial or epithelial cells, whilst presenting a barrier to luminal content. Tissue engineering research enables the construction of such organs and this study explores this possibility with a bioabsorbable nanocomposite biomaterial, polyhedral oligomeric silsesquioxane poly(ε-caprolactone) urea urethane (POSS-PCL).Our established methods of tubular graft extrusion were modified using a porogen-incorporated POSS-PCL and a new lamination method was explored. Porogen (40, 60 or 105 µm) were introduced to POSS-PCL, which were fabricated into a bilayered, dual topography matching the exterior and luminal interior of tubular organs. POSS-PCL with different amounts of porogen were tested for their suitability as a SMC layer by measuring optimal interactions with human adipose derived stem cells. Angiogenesis potential was tested with the chorioallantoic membrane assay. Tensile strength and burst pressures of bilayared tubular grafts were determined. Scaffolds made with 40 µm porogen demonstrated optimal adipose derived stem cell integration and the scaffolds were able to accommodate angiogenesis. Mechanical properties of the grafts confirmed their potential to match the relevant physiological and biophysical parameters. This study presents a platform for the development of hollow organs for transplantation based on POSS-PCL. These bilayered-tubular structures can be tailor-made for cellular integration and match physico-mechanical properties of physiological systems of interest. More specific luminal cell integration and sources of SMC for the external layer could be further explored.