A Proof of the Low Speed Centrifugation Concept in Rodents: New Perspectives for In Vivo Research

Three Milliliters of Peripheral Blood Is Sufficient for Preparing Liquid Platelet-Rich Fibrin (PRF): An In Vitro Study

Platelet-rich fibrin (PRF) has assumed an important role in supporting tissue regeneration in different fields. To date, the standard protocol for liquid PRF requires at least 10 mL of peripheral blood. The present study aimed to analyze the composition, growth factor release, and effects on the cell proliferation of PRF samples produced using 3 mL vs. 10 mL of peripheral blood in vitro. Peripheral venous blood from six healthy donors was used to prepare liquid PRF using either 3 mL or 10 mL tubes. Three different centrifugation protocols were used according to the low-speed centrifugation concept. The cellular distribution was evaluated using immunohistology and automated cell count. ELISA was used to determine the release of different growth factors (EGF, TGF-β1, and PDGF) and interleukin 8 at different time points. Primary human osteoblasts (pOBs) were cultivated for 7 days using PRF-conditioned media acquired from either 3 mL or 10 mL of peripheral blood. The results showed that 3 mL of peripheral blood is sufficient to produce a liquid PRF concentrate similar to that acquired when using 10 mL blood. The concentrations of platelets and leukocytes were comparable regardless of the initial blood volume (3 mL vs. 10 mL). Similarly, the release of growth factors (EGF, TGF-β1, and PDGF) and interleukin 8 was often comparable in both groups over 7 days. The cultivation of pOBs using PRF-conditioned media showed a similar proliferation rate regardless of the initial blood volume. This proliferation rate was also similar to that of pOBs treated with 20% FBS-conditioned media. These findings validated the use of 3 mL of peripheral blood to generate liquid PRF matrices according to the low-speed centrifugation concept, which may open new application fields for research purposes such as in vivo experiments and clinical applications such as pediatric surgery.

Effectiveness of Oroantral Communication Closure Using Solid Platelet-Rich Fibrin Compared to a Conventional Treatment Approach: A Randomized Clinical Trial

This study aimed to compare the effectiveness of platelet-rich fibrin clot (PRF) and conventional oroantral communication (OAC) repair techniques following tooth extractions from the maxilla. The study involved 22 patients, divided into 2 groups: a study group treated with PRF and a control group undergoing conventional OAC repair. The primary outcome measured was the effectiveness of OAC closure, with pain intensity and postoperative complications as secondary outcomes. Cone-beam computed tomography (CBCT) was used to evaluate post-extraction bone regeneration. Pain was assessed using the Visual Analogue Scale (VAS) on days 0, 1, 7, and 14 postoperatively. The results showed that the PRF group experienced a significant decrease in pain within the first 24 hours and after 7 days (P < .0001; P < .05). In contrast, complications were reported in 45.45% of patients in the conventional repair group and 18.18% in the A-PRF group. Three months postsurgery, CBCT revealed appreciable bone healing in both groups, with no significant difference (P > .05). In conclusion, the study suggests that A-PRF treatment for OACs resulted in fewer complications and quicker pain reduction than traditional repair methods, making it a promising alternative for managing OACs. However, future studies are needed to confirm these findings and establish the full therapeutic potential of PRF.

Treatment of an apical cyst with platelet concentrate - a case report

Apical cysts are typically caused by dental pulp disease and are difficult to treat. In the majority of cases, surgical intervention is required. The rate of success after apical osteotomy varies between 60% and 91%. The introduction of platelet concentrates in treating chronic apical periodontitis is a promising direction for achieving quick and secure results. This article examines the healing of a sizable apical cyst after conservative surgical intervention and the application of platelet concentrate.

Comparison of the effects of platelet concentrates produced by high and low-speed centrifugation protocols on the healing of critical-size defects in rat calvaria: a microtomographic and histomorphometric study

The current study evaluated the healing of critical-size defects (CSD) created in rat calvaria treated with platelet concentrates produced by high-speed (Leukocyte- and Platelet-Rich Fibrin - L-PRF) and low-speed (Advanced Platelet-Rich Fibrin - A-PRF) protocols of centrifugation. Twenty-four rats were distributed into three groups: Control, L-PRF, and A-PRF. Five mm diameter CSD were created on the animals' calvaria. The defects of the L-PRF and A-PRF groups were filled with 0.01 ml of L-PRF and A-PRF, respectively. The control group defects were filled with a blood clot only. All animals were euthanized on the 35th postoperative day. Histomorphometric and microtomographic analyses were then performed. The L-PRF and A-PRF groups had significantly higher bone volume and neoformed bone area than those of the control group and lowered bone porosity values (p < .05). No significant differences were observed between A-PRF and L-PRF groups for the analyzed parameters. Therefore, it can be concluded that i) L-PRF and A-PRF potentiated the healing of CSD in rat calvaria; ii) high and low-speed centrifugation protocols did not produce PRF matrices with different biological impacts on the amount of bone neoformation.

The feasibility of injectable PRF (I-PRF) for bone tissue engineering and its application in oral and maxillofacial reconstruction: From bench to chairside

Among all the biomaterials introduced in the field of bone tissue engineering, injectable platelet-rich fibrin (I-PRF) has recently gained considerable attention. I-PRF, as a rich source of biologically active molecules, is a potential candidate which can be easily obtained in bedside and constitutes several biological factors which can result in higher anti-bacterial, anti-inflammatory and regenerative capabilities. According to the studies evaluating the osteogenic efficacy of I-PRF, this biomaterial has exhibited favorable outcomes in terms of adhesion, differentiation, migration, proliferation and mineralization potential of stem cells. In addition, the injectability and ease-of-applicability of this biomaterial has led to its various clinical applications in the oral and maxillofacial bone regeneration such as ridge augmentation, sinus floor elevation, cleft palate reconstruction and so on. Furthermore, to enhance the clinical performance of I-PRF, albumin gel-PRF as a long-lasting material for long-term utilization has been recently introduced with a gradual increase in growth factor release pattern. This review provides a comprehensive approach to better evaluate the applicability of I-PRF by separately appraising its performance in in-vitro, in-vivo and clinical situations. The critical approach of this review toward the different production protocols and different physical and biological aspects of I-PRF can pave the way for future studies to better assess the efficacy of I-PRF in bone regeneration.

Efficacy of platelet-rich fibrin in promoting the healing of extraction sockets: a systematic review

PURPOSE

To address the focused question: in patients with freshly extracted teeth, what is the efficacy of platelet-rich fibrin (PRF) in the prevention of pain and the regeneration of soft tissue and bone compared to the respective control without PRF treatment?

METHODS

After an electronic data search in PubMed database, the Web of Knowledge of Thomson Reuters and hand search in the relevant journals, a total of 20 randomized and/or controlled studies were included.

RESULTS

66.6% of the studies showed that PRF significantly reduced the postoperative pain, especially in the first 1-3 days after tooth extraction. Soft tissue healing was significantly improved in the group of PRF compared to the spontaneous wound healing after 1 week (75% of the evaluated studies). Dimensional bone loss was significantly lower in the PRF group compared to the spontaneous wound healing after 8-15 weeks but not after 6 months. Socket fill was in 85% of the studies significantly higher in the PRF group compared to the spontaneous wound healing.

CONCLUSIONS

Based on the analyzed studies, PRF is most effective in the early healing period of 2-3 months after tooth extraction. A longer healing period may not provide any benefits. The currently available data do not allow any statement regarding the long-term implant success in sockets treated with PRF or its combination with biomaterials. Due to the heterogeneity of the evaluated data no meta-analysis was performed.

A standardized g-force allows the preparation of similar PRF qualities regardless of rotor angle

Platelet rich fibrin (PRF) is an autologous blood concentrate, that supports tissue regeneration. The effect of the centrifuge rotor angle in the fabrication of PRF is still not fully elucidated. The hypothesis of this study is: When applying the same g-force {relative centrifugal force (RCF)} and centrifugation time, PRF components and bioactivity are not modified using either a swing-out or fixed angle rotor. For this purpose, peripheral blood samples (five donors )were used to gain solid matrices (710 xg, 8 minutes) and liquid (44 xg, 8 minutes) PRF matrices using three different centrifuges (one fixed angle as a control; and two different swingout rotor centrifuges). The physical characteristics of the solid PRF were measured to evaluate the clot formation and cellular distribution. Liquid PRF was used to evaluate the cell number, bioactivity and influence on primary human osteoblasts and fibroblasts in vitro. Solid PRF clots were significantly larger in the group of fixed rotor centrifuges compared to either of the two evaluated swing-out rotor centrifuges. No differences were observed when evaluating the cellular distribution within the solid No statistically significant differences were documented in the cell's density in liquid PRF samples (platelets, lymphocytes, neutrophils, eosinophils, and basophils) among the differently gained PRF samples. No statistically significant differences were documented for the released growth factors (VEGF, EGF, TGF-β1) over 7 days. Primary human osteoblasts (pOBs) and primary human fibroblasts (pHFs) viability after treatment with PRF conditioned media showed no statistically significant differences between the evaluated groups. However, the number of adherent cells treated with PRF obtained with the use of the fixed angle rotor was significantly higher when compared to those treated with PRF obtained by using the swing-out rotors. The presented results confirmed that regardless of the centrifuge rotor used, the components and bioactivity of solid and liquid PRF matrices are modified by the applied RCF and centrifugation time. These findings are of great importance for highlighting the essential role of adapting the centrifugation protocols when using different centrifuges and to correctly report the used centrifugation protocols in scientific research to allow for reproducible results.

Biologization of Pcl-Mesh Using Platelet Rich Fibrin (Prf) Enhances Its Regenerative Potential In Vitro

INTRODUCTION

Resorbable synthetic scaffolds are promising for different indications, especially in the context of bone regeneration. However, they require additional biological components to enhance their osteogenic potential. In addition to different cell types, autologous blood-derived matrices offer many advantages to enhance the regenerative capacity of biomaterials. The present study aimed to analyze whether biologization of a PCL-mesh coated using differently centrifuged Platelet rich fibrin (PRF) matrices will have a positive influence on primary human osteoblasts activity in vitro. A polymeric resorbable scaffold (Osteomesh, OsteoporeTM (OP), Singapore) was combined with differently centrifuged PRF matrices to evaluate the additional influence of this biologization concept on bone regeneration in vitro. Peripheral blood of three healthy donors was used to gain PRF matrices centrifuged either at High (710× g, 8 min) or Low (44× g, 8 min) relative centrifugal force (RCF) according to the low speed centrifugation concept (LSCC). OP-PRF constructs were cultured with pOBs. POBs cultured on the uncoated OP served as a control. After three and seven days of cultivation, cell culture supernatants were collected to analyze the pOBs activity by determining the concentrations of VEGF, TGF-β1, PDGF, OPG, IL-8, and ALP- activity. Immunofluorescence staining was used to evaluate the Osteopontin expression of pOBs. After three days, the group of OP+PRFLow+pOBs showed significantly higher expression of IL-8, TGF-ß1, PDGF, and VEGF compared to the group of OP+PRFHigh+pOBs and OP+pOBs. Similar results were observed on day 7. Moreover, OP+PRFLow+pOBs exhibited significantly higher activity of ALP compared to OP+PRFHigh+pOBs and OP+pOBs. Immunofluorescence staining showed a higher number of pOBs adherent to OP+PRFLow+pOBs compared to the groups OP+PRFHigh+pOBs and OP+pOBs. To the best of our knowledge, this study is the first to investigate the osteoblasts activity when cultured on a PRF-coated PCL-mesh in vitro. The presented results suggest that PRFLow centrifuged according to LSCC exhibits autologous blood cells and growth factors, seem to have a significant effect on osteogenesis. Thereby, the combination of OP with PRFLow showed promising results to support bone regeneration. Further in vivo studies are required to verify the results and carry out potential results for clinical translation.

Anti-inflammation effects of injectable platelet-rich fibrin via macrophages and dendritic cells

Immune response to implantation materials plays a critical role during early local inflammation and biomaterial-induced regeneration or restoration. A novel platelet concentrate termed i-PRF (injectable platelet-rich fibrin) has recently been developed without any additives by low centrifugation speeds. To date, scientists have investigated the capability of releasing growth factors to improve regeneration but have ignored whether i-PRF can inhibit the inflammatory effect around the wound. The present study investigated the anti-inflammation effects of i-PRF on immune response-related cells, especially macrophages and dendric cells. We found that i-PRF reduced pro-inflammatory M1 phenotype of macrophages and activated dendritic cells around muscle defect that was injected with bacterial suspension. Moreover, in vitro experiments showed similar results. i-PRF deleted inflammatory response caused by lipopolysaccharide to some extent. We determined that TLR4, an activator of inflammatory stimulation and p-p65, a key factor belongs to classical inflammatory related NF-κB signal pathway, can be inhibited by use of i-PRF. Results indicate the potential anti-inflammatory role of i-PRF during regeneration and restoration.

Biomaterial-based bone regeneration and soft tissue management of the individualized 3D-titanium mesh: An alternative concept to autologous transplantation and flap mobilization

Three-dimensional augmentation in severely atrophic bone and after cancer resection is a challenging clinical indication that is mostly solved using autologous bone transplantation. The development of the digital technique along with the additive manufacturing and three-dimensional (3D) printing opened new avenues for reconstructive oral and maxillofacial surgery. Therefore, patient-specific titanium mesh is a novel means of stabilizing the augmentation region using particulate bone substitute materials (BSMs) combined with autologous bone as a minimally invasive concept. However, dehiscence is a frequently reported complication in this field. Therefore, the aim of the present case series was to introduce a biomaterial-based regenerative concept in terms of exposed open healing to overcome the dehiscence related to 3D-titanium meshes. Additionally, this case series presents a novel protocol using a combination of xenogeneic BSMs with an autologous blood concentrate system (platelet-rich fibrin [PRF]) and collagen matrices without any autologous transplantation. Seven patients with alveolar ridge atrophy with different etiologies (cancer resection, severe atrophy after tooth loss, aplasia, trauma, implant infections) were treated using the open-healing concept. Therefore, after 3D augmentation using the described biomaterials, the flap margins were approximated, and the gap between the flap margins was bridged using a collagen matrix loaded with liquid PRF that was then covered by either a PTFE-based membrane or sterile latex. No periosteum splitting was performed at any time point. After a healing period of 4-8 months, all patients received dental implants as virtually planned. Bone biopsies were performed during dental insertion for histological evaluation. The augmentation area displayed a vital and well-vascularized newly formed bone that incorporated the BSM granules to build a hybrid bone. Additionally, open healing resulted in newly formed soft tissue without any signs of scar formation or fibrosis. The regenerated soft tissue was used to build a new flap during implant insertion and showed good functional and aesthetic results after implant insertion. The open-healing concept of the regeneration of the soft tissue along with bone tissue to regenerate a harmonic implantation bed is a minimally invasive intervention without periosteum splitting or large flap mobilization. However, further controlled clinical studies are needed to evaluate this concept in a larger patient cohort to outline the potential clinical benefit.