A Clean, Sustainable and Stability-Indicating Method for the Quantification of Ceftriaxone Sodium in Pharmaceutical Product by HPLC

Ivermectin-Based Products in the Context of Green Pharmaceutical Analysis

BACKGROUND

Ivermectin (IVE), a broad-spectrum antiparasitic, is used in human and animal health. Analytical methods for evaluating IVE in pharmaceutical products are found in the literature and in official compendiums. However, the vast majority of them do not have an eco-friendly approach.

OBJECTIVE

The aim of this review is to present an overview of existing analytical methods for evaluating IVE in pharmaceutical matrixes in the context of green analytical chemistry (GAC) and show possibilities for increasing their greenness.

RESULTS

GAC is a current alternative to promote sustainable development in laboratories and chemical-pharmaceutical industries; therefore, through its principles, such as reducing the use of aggressive solvents, it is possible to make processes more ecological. However, the vast majority of analytical methods available in the literature and official compendiums do not present an eco-friendly approach. Seventy percent of the methods are by high performance liquid chromatography (HPLC). Among the various pharmaceutical matrixes, the most evaluated are tablets (37%). Of all the solvents used in HPLC, ultra performance liquid chromatography (UPLC), high performance liquid chromatography coupled to mass spectrometry (HPLC-MS/MS), ultraviolet spectrophotometry (UV) and thin layer chromatography (TLC) methods, the combination of methanol and acetonitrile is the most used, accounting for more than 50% of occurrences.

CONCLUSION

Analytical methods for evaluating IVE-based products can be leveraged within the scope of GAC, bringing sustainable work opportunities to analytical development laboratories around the world.

HIGHLIGHTS

This review shows an overview of the analytical methods present in the literature and official compendiums to evaluate pharmaceutical IVE matrixes, in the context of GAC.

125 Years of Aspirin: Status of Analytical Methods

Aspirin, an analgesic, antipyretic and non-steroidal anti-inflammatory drug, was a fascinating discovery that became the precursor to one of the oldest pharmaceutical success stories. It was discovered in 1899 by Felix Hoffman and patented in 1900. In 2024, Aspirin turns 125 years old and is still one of the bestselling medicines today. This review aims to celebrate 125 years of Aspirin and show the status of analytical methods available in the literature to evaluate pharmaceutical products based on Acetylsalicylic Acid (ASA). In addition, it contextualizes them with the current needs of green and clean analytical chemistry. ASA, despite being consolidated in the consumer market, embraces continuous improvement as it is a fundamental part of studies for other new purposes and studies with associations with other active ingredients. In the manuscripts available in the literature, ASA is predominantly evaluated by HPLC (41%) and UV-vis (41%) methods, which use methanol (21.82%) and acetonitrile (18.18%), followed by buffer (16.36%). The most evaluated pharmaceutical matrix is ASA tablets (40%), followed by ASA tablets in combination with other drugs (26%). While ASA continues to innovate in the market through new forms of delivery and combinations, as well as intended purposes, the analytical methods for evaluating its pharmaceutical products do not. They continue with non-eco-efficient analytical options, which can significantly improve and meet the current demand for green and sustainable analytical chemistry.

Green Method for Evaluation of Marbofloxacin Tablets by HPLC and Evaluation of Interchangeability With UV and Turbidimetric Methods

BACKGROUND

Marbofloxacin (MAR) is a veterinary antimicrobial, marketed in injectable solution, oral suspension, and tablets. MAR has no monograph for tablet evaluation in official compendiums. High Performance Liquid Chromatography (HPLC) methods present in the literature for evaluating MAR in tablets do not follow the principles of green and sustainable analytical chemistry.

OBJECTIVE

A green, clean, and sustainable method by HPLC was developed and validated to evaluate the content and stability of MAR in tablets, in addition to comparing it with other methods available in the literature.

METHOD

A C8, 5 µm, 4.6 × 150 mm (ACE®) column, purified water with 0.2% formic acid-ethanol (70:30, v/v) as the mobile phase, and a flow rate of 0.7 mL/min at 296 nm were used.

RESULTS

The method was linear over a concentration range of 1-10 μg/mL, selective for tablet matrix and forced degradation, precise with relative standard deviations (RDS) less than 5%, accurate with recovery of 99.99%, and robust to changes in the mobile phase, flow rate, wavelength, equipment, and column brand. The retention time for MAR was approximately 3.1 min.

CONCLUSIONS

The method can be used in routine analysis of MAR in tablets in chemical-pharmaceutical laboratories. Furthermore, it can be used to verify the stability of MAR-based products and proved to be interchangeable with spectrophotometric method in the UV region and turbidimetric microbiological method.

HIGHLIGHTS

A green method for evaluation of marbofloxacin tablets by HPLC was developed and validated. Additionally, it has been shown to be interchangeable with UV and turbidimetric methods.

Long-term effects on liver metabolism induced by ceftriaxone sodium pretreatment

Ceftriaxone is an emerging contaminant due to its potential harm, while its effects on liver are still need to be clarified. In this study, we first pretreated the 8-week-old C57BL/6J mice with high dose ceftriaxone sodium (Cef, 400 mg/mL, 0.2 mL per dose) for 8 days to prepare a gut dysbiosis model, then treated with normal feed for a two-month recovery period, and applied non-targeted metabolomics (including lipidomics) to investigate the variations of fecal and liver metabolome, and coupled with targeted determination of fecal short-chain fatty acids (SCFAs) and bile acids (BAs). Lastly, the correlations and mediation analysis between the liver metabolism and gut metabolism/microbes were carried, and the potential mechanisms of the mal-effects on gut-liver axis induced by Cef pretreatment were accordingly discussed. Compared to the control group, Cef pretreatment reduced the rate of weight gain and hepatosomatic index, induced bile duct epithelial cells proliferated around the central vein and appearance of binucleated hepatocytes, decreased the ratio of total branching chains amino acids (BCAAs) to total aromatic amino acids (AAAs) in liver metabolome. In fecal metabolome, the total fecal SCFAs and BAs did not change significantly while butyric acid decreased and the primary BAs increased after Cef pretreatment. Correlation and mediation analysis revealed one potential mechanism that Cef may first change the intestinal microbiota (such as destroying its normal structure, reducing its abundance and the stability of the microbial network or certain microbe abundance like Alistipes), and then change the intestinal metabolism (such as acetate, caproate, propionate), leading to liver metabolic disorder (such as spermidine, inosine, cinnamaldehyde). This study proved the possibility of Cef-induced liver damage, displayed the overall metabolic profile of the liver following Cef pretreatment and provided a theoretical framework for further research into the mechanism of Cef-induced liver damage.

Moxifloxacin: Physical-chemical and Microbiological Analytical Methods in the Context of Green Analytical Chemistry

Moxifloxacin (MOX) is a fourth-generation fluoroquinolone used in the form of tablets, infusion solutions and ophthalmic solutions. It does not have a physical-chemical or microbiological analytical method described in an official compendium. However, the literature shows some analysis methods for pharmaceuticals and biological matrices. In this context, the objective is to show the analytical methods present in the literature for the investigation of MOX by physical-chemical and microbiological techniques, as well as discussing them according to the requirements of current pharmaceutical analyses and green analytical chemistry. Among the physical-chemical methods present in the literature for MOX evaluation, 33% are HPLC, 21% are UV-Vis and 17% are capillary electrophoresis. On the other hand, among the microbiological methods, all of them are based on diffusion in agar. There is still scope in the literature to incorporate new and improved analytical methods for MOX evaluation, which adopt the concepts of green and sustainable analytical chemistry, either by using less (or not using) toxic organic solvents, reducing waste generation or even reducing the analysis time according to the intended objectives.

Overview of Analytical Methods for Evaluating Tinidazole

BACKGROUND

Tinidazole (TIN) has amoebicidal, giardicidal, antifungal, and antimicrobial activities. It is marketed in the form of tablets. Analytical methods to assess the quality of TIN-based products are essential for correct pharmacotherapy.

OBJECTIVE

The objective of this review is to show an overview of the existing analytical methods for evaluating TIN, according to the quality control (QC) analysis routine and green analytical chemistry (GAC).

RESULTS

Official compendia show a method for evaluating TIN in tablets by nonaqueous titration, which has limitations (materials on the mg scale using solvents considered not recommended and harmful). The literature shows some analytical methods for evaluating TIN, both physicochemical and microbiological. The most used physicochemical method is UV (41%), and second is HPLC (28%). Among the microbiological methods, agar diffusion and turbidimetric methods are equally divided. The most studied matrix is TIN tablets (73%), and the most used solvent is methanol.

CONCLUSIONS

The literature shows space for the development of analytical methods according to GAC for evaluating TIN, optimizing time, resources, and materials, reducing waste generation, and opting for less aggressive reagents, solvents, and diluents.

HIGHLIGHTS

This review shows the status of analytical methods, both physicochemical and microbiological, for the analysis of TIN in pharmaceutical matrix, in the context of routine analysis of the chemical-pharmaceutical industries and of GAC.

Review of Analytical Methods for Evaluating Azithromycin in the Context of Green Analytical Chemistry

BACKGROUND

Azithromycin (AZT) is an antimicrobial available in different pharmaceutical forms and many people can have access to this medicine. Therefore, the existence of adequate and reliable analytical methods for evaluating the quality of AZT and AZT-based products is essential.

OBJECTIVE/METHODS

The purpose of this review is to discuss the analytical methods for evaluating AZT present in the literature and official compendia in the context of Green Analytical Chemistry (GAC).

RESULTS

Among the methods found in the literature for evaluating AZT, the most used method is HPLC (62%) followed by TLC (14%) and the microbiological method by agar diffusion (14%). Even pharmacopoeias recommend the analysis of AZT by HPLC or agar diffusion. Acetonitrile and methanol account for 35% of the most used solvents in the analyses, followed by buffer.

CONCLUSION

AZT lacks analytical methods in the context of GAC. Both physical-chemical and microbiological methods can contemplate the environmentally friendly way to analyze AZT and AZT-based products, depending only on the chosen conditions. Ethanol, purified water, acetic acid instead of methanol, acetonitrile, buffer, formic acid in the physical-chemical methods are excellent alternatives. However, in the microbiological method, turbidimetry is a great option instead of agar diffusion.

Tools to Evaluate the Eco-efficiency of Analytical Methods in the Context of Green and White Analytical Chemistry: A Review

BACKGROUND

The release of a product in the consumer market requires an analysis by quality control. This sector makes use of reliable analytical methods, by high performance liquid chromatography (HPLC), spectrophotometry in the ultraviolet and visible regions (UV-Vis), spectrophotometry in the infrared region (IR) or thin layer chromatography (TLC), for example, to reach a result. The analysis conditions of most of these analytical methods currently still use toxic reagents, generate a greater amount of waste, sample preparation has more steps, the need for instrumentation and consumables in greater quantity, generating a cost and impact on health and the environment greater than if there were adoption of the Green Analytical Chemistry (GAC) and the White Analytical Chemistry (WAC).

OBJECTIVE/METHODS

The objective of this review is to show the relationship of analytical choices for current pharmaceutical analyzes with the GAC and the WAC.

RESULTS

Analytical methods can be evaluated for greenness and whiteness using tools such as the National Environmental Method Index (NEMI), Eco-Scale Assessment (ESA), Analytical Greenness Metric (AGREE) and Green Analytical Procedure Index (GAPI).

CONCLUSION

The use of NEMI, ESA, AGREE and GAPI tools brings the objective evidence needed to discuss the greenness and whiteness of an analytical method, leaving the subjective level. Furthermore, semi or quantitative data facilitate the choice of an analytical method and its conditions, when the target is the concern with eco-efficiency.

An Overview of Analytical Methods for the Quantification of Marbofloxacin in Pharmaceutical, Biological and Food Matrices

BACKGROUND

Marbofloxacin (MAR), a second-generation fluoroquinolone, is used in veterinary medicine in the form of tablets. It has a broad spectrum of action, low toxicity, and limited development of bacterial resistance. The analytical methods available in the literature become more important since MAR in tablets does not have a monograph in official compendiums.

OBJECTIVE

Thus, the purpose of this review is to display them according to the analyzed matrix and place them according to the conditions used in the scope of green analytical chemistry, in addition to discussing possible gaps and opportunities for the development of new methods.

RESULTS

MAR, being an antimicrobial, presents both physical-chemical (93%) and microbiological (7%) methods in the literature. Among the methods found, 53% are for analysis of food matrices using preferably HPLC and TLC-MS. 27% are for analysis of biological matrices and 20% are for analysis of pharmaceutical matrices, and in both HPLC is preferably used.

CONCLUSIONS

Therefore, there is still a gap in the literature in relation to other options of analytical methods for the analysis of MAR, which are faster, such as microbiological turbidimetry, sustainable, such as miniaturized methods, and ecologically correct, such as those that do not usetoxic organic solvents.

HIGHLIGHTS

A review of the status of analytical methods available in the literature for assessing the quality of MAR and MAR-based products were exhibited and discussed, as well as new opportunities for analysis according to green analytical chemistry.