Utilization of erythrosine B in spectrofluorimetric quenching analysis of amlodipine and perindopril in pharmaceutical and biological matrices

A spectrofluorimetric approach that is sensitive, simple, validated, and cost-effective has been proposed for the estimation of amlodipine (AML) and perindopril (PER) in their bulk powders, pharmaceutical formulations, and spiked human plasma. The recommended approach utilized the quantitative quenching effect of the two cited drugs on the fluorescence intensity of erythrosine B, as a result of complex binary reactions among each drug with erythrosine B at pH 3.5 (Teorell and Stenhagen buffer). The quenching of erythrosine B fluorescence was recorded at 554 nm after excitation at 527 nm. The calibration curve was detected in the range 0.25-3.0 μg ml-1 , with a correlation coefficient of 0.9996 for AML, and 0.1-1.5 μg ml-1 , with a correlation coefficient of 0.9996 for PER. The established spectrofluorimetric approach was validated for the estimation of the cited drugs with high sensitivity regarding International Council on Harmonization guidelines. Therefore, the established approach could be utilized for quality control of the cited drugs in their pharmaceutical formulations.

Diuretics in Different Samples: Update on the Pretreatment and Analysis Techniques

Diuretics are drugs that promote the excretion of water and electrolytes in the body and produce diuretic effects. Clinically, they are often used in the treatment of edema caused by various reasons and hypertension. In sports, diuretics are banned by the World Anti-Doping Agency (WADA). Therefore, in order to monitor blood drug concentration, identify drug quality and maintain the fairness of sports competition, accurate, rapid, highly selective and sensitive detection methods are essential. This review provides a comprehensive summary of the pretreatment and detection of diuretics in various samples since 2015. Commonly used techniques to extract diuretics include liquid-liquid extraction, liquid-phase microextraction, solid-phase extraction, solid-phase microextraction, among others. Determination methods include methods based on liquid chromatography, fluorescent spectroscopy, electrochemical sensor method, capillary electrophoresis and so on. The advantages and disadvantages of various pretreatment and analytical techniques are elaborated. In addition, future development prospects of these techniques are discussed.

Spectrofluorimetric assay of amlodipine and perindopril in their raw materials, pharmaceutical formulations and spiked human plasma through the formation of complexes with Eosin Y

For quantitation of amlodipine (AML) and perindopril (PER) in their authentic, pharmaceutical formulations and spiked human plasma, a simple, sensitive, validated and inexpensive spectrofluorimetric method has been developed. The proposed method is developed to be based on quantitative quenching effect of two antihypertensive drugs on Eosin Y's native fluorescence which was achieved by developing binary complexes between each of the cited drugs in an acidic environment using acetate buffer (pH 4.4) with Eosin Y. Fluorescence quenching was recorded at 544 nm after excitation at 425 nm. For AML and PER, calibration curves were obtained over the range of 0.3–3.0 µg/mL and 0.2–2.0 µg/mL, respectively, with correlation coefficients of 0.9993 and 0.9995, respectively. The developed method was validated according to ICH guidelines. The proposed spectrofluorimetric method is regarded new and sensitive. As a result, the proposed method might be used to estimate the quality of the cited drugs in their pharmaceutical formulations and biological fluid.

An LC-MS/MS Method for Determination of Triple Drugs Combination of Valsartan, Amlodipine and Hydrochlorothiazide in Human Plasma for Bioequivalence Study

Background:

Current guidelines for the treatment of hypertension recommend combination therapy, which intends to control blood pressure and enhance cardiovascular protection.

Materials and Methods:

A sensitive, reliable and selective tandem mass spectrometry (LC-MS/MS) method has been developed for simultaneous quantification of amlodipine (AML), valsartan (VAL) and hydrochlorothiazide (HCTZ) in human plasma. The chromatographic system was equipped with ACE 5 C8 (50 X 2.1 mm) column and utilized a mobile phase composition of 0.5 mM Ammonium Chloride & 0.04% FA-Methanol (45:55% v/v). The method used three internal standards; AML-D4, HCTZ-D2 C13 and VAL-D3 with 10% intra- and inter-day precision, and 6% bias for all the analytes.

Results:

The assay was found to be linear with R-2 > 0.998, and the limits of quantification for AML, VAL and HCTZ were 0.2, 50.0 and 2.0 ng/mL, respectively. The analytes were found to be stable in plasma samples over short and long term storage.

:

The developed method is rapid with a run time of 3.5 min and cost-effective since the simple sample preparation method is adopted. This method was successfully applied for the bioequivalence study of AML, VAL, and HCTZ in human plasma after administration of the fixed-dose combination tablet of (10/160/25 mg). Pharmacokinetic parameters (Cmax and AUC0-72) for AML and (Cmax, AUC0-t, AUC0-∞) for VAL and HCTZ were used for bioequivalence assessment. These were determined by noncompartmental analysis of concentration data.

Conclusion:

The result showed 90% confidence intervals (obtained by ANOVA) which were within the predefined ranges. As a consequence, this method can be successfully applied for measuring and quantifying a large number of samples.

A Versatile Stability-indicating Liquid Chromatographic Method for the Simultaneous Determination of Atenolol, Hydrochlorothiazide and Chlorthalidone

Background:

Atenolol is a selective beta 1 blocker that can be used alone or in combination with hydrochlorothiazide or with chlorthalidone for the treatment of hypertension and prevention from a heart attack.

Objective:

The main target of this work was to improve modern, easy, accurate and selective liquid chromatographic method (RP-HPLC) for the determination of these drugs in the presence of their degradation products. These methods can be used as analytical gadgets in quality control laboratories for a routine examination.

Methods:

In this method, the separation was accomplished through an Inertsil® ODS-3V C18 column (250 mm x 4.6 mm, 5 μm), the mobile phase used was 25 mM aqueous potassium dihydrogen orthophosphate solution adjusted to pH 6.8 by using 0.1M sodium hydroxide and acetonitrile (77 : 23, v/v), the flow rate used was 1 ml/min and detection was achieved at 235 nm using UV.

Results:

All peaks were sharp and well separated, the retention times were atenolol degradation (ATN Deg.) 2.311 min, atenolol (ATN) 2.580 min, hydrochlorothiazide degradation (HCT Deg.) 5.890 min, hydrochlorothiazide (HCT) 7.016 min, chlorthalidone degradation CTD Deg 8.018 min and chlorthalidone (CTD) 14.972 min. Linearity was obtained and the range of concentrations was 20- 160 μg/ml for atenolol, 10-80 μg/ml for hydrochlorothiazide and 10-80 μg/ml for chlorthalidone. According to ICH guidelines, method validation was accomplished, these methods include linearity, accuracy, selectivity, precision and robustness.

Conclusion:

The optimized method demonstrated to be specific, robust and accurate for the quality control of the cited drugs in pharmaceutical dosage forms.

Analytical and Bioanalytical Techniques for the Quantification of the Calcium Channel Blocker - Amlodipine: A Critical Review

Hypertension is a condition in which blood pressure is elevated to an extent where benefit is obtained from blood pressure lowering. The risk of complications is proportional to the level that blood pressure raises. Calcium channel blockers are a class of compounds used in the treatment of hypertension. The dihydropyridine (DHP) group, a subclass of the calcium channel blocker works almost exclusively on L-type calcium channels in the peripheral arterioles and reduce blood pressure by reducing total peripheral resistant. Long acting DHP is preferred because they are more convenient for patients and avoid the large fluctuations in plasma drug concentration which are associated with side effects. Amlodipine is the most distinct DHP and the most popular. The drug was patented in the year 1986 and its commercial sale began by 1990. The current article provides a state of art about the analytical and bioanalytical techniques available for the quantification of drug as a single entity and in combined pharmaceutical formulations between 1989 and 2019.

Determination of Tryptophan and Kynurenine by LC-MS/MS by Using Amlodipine as an Internal Standard

Tryptophan is an essential amino acid that plays an important role in cell metabolism, and kynurenine is its main metabolic pathway. By using ultra-high-performance liquid chromatography coupled to electrospray ionization triple-quadrupole mass spectrometry, tryptophan and kynurenine were determined using amlodipine as an internal standard. The analysis was carried out on an ACE-C18 (4.6 mm × 50 mm, 5 μm) reversed-phase analytical column using the gradient elution mode. For quantitative determination, amlodipine was used as an internal standard. Detection was performed using multiple reaction monitoring in electrospray ionization mode at m/z 205.1 → 117.7 and 187.9 for tryptophan, m/z 209.1 → 146 and 93.9 for kynurenine, and m/z 409.2 → 294.1 for the internal standard. Good linearity of the analyte to internal standard peak area ratios was seen in the concentration range 1.25-4000 ng/mL for tryptophan and 0.5-1600 ng/mL for kynurenine. The method showed excellent linearity with regression coefficients of 0.99 for kynurenine and 0.996 for tryptophan. The limits of quantification were 0.55 ng/mL for tryptophan and 0.47 ng/mL for kynurenine. The % RSD for all analytes ranged from 0.3 to 3.4% for intraday and 0.4 to 8.9% for interday experiments. A simple LC-MS/MS method has been developed and validated for measuring Kyn and Trp by using an affordable and more easily available internal standard, which is amlodipine.

Ultra-high performance liquid chromatography-MS/MS (UHPLC-MS/MS) in practice: analysis of drugs and pharmaceutical formulations

Background

UHPLC-MS/MS is connected in various research facilities for the qualitative and quantitative investigation of a pharmaceutical substance, pharmaceutical items, and biological specimen.

Main body

The commence review article is an endeavor to offer pervasive awareness around assorted aspects and details about the UHPLC-MS/MS and related techniques with the aim on practice to an estimation of medicinal active agents in the last 10 years. The article also focused on isolation, separation, and characterization of present impurity in drug and biological samples.

Conclusion

Review article compiles a general overview of medicinally important drugs and their analysis with UHPLC-MS/MS. It gives fundamental thought regarding applications of UHPLC-MS/MS for the study on safety limit. The summary of developed UHPLC-MS/MS methods gives a contribution to the future trend and limitations in this area of research.

Electrochemical simulation of three novel cardiovascular drugs phase I metabolism and development of a new method for determination of them by liquid chromatography coupled with tandem mass spectrometry

In this study electrochemistry (EC) coupled with electrospray ionization mass spectrometry (ESI-MS) was used to study the metabolic fate of three novel cardiovascular drugs: rivaroxaban (RIV), aliskiren (ALS), and prasugrel (PRS). Mimicry of the oxidative phase I metabolism was achieved in a simple amperometric thin-layer cell equipped with a boron-doped diamond (MD) working electrode. Structures of the electrochemically-generated metabolites were elucidated from MS/MS experiments. Additionally, a sensitive, specific, and rapid ultra-high performance liquid chromatography-tandem mass spectrometer (UHPLC-MS/MS) method has been developed and validated for the selected drugs in human urine samples. Three different sample preparation methods were compared and finally, sample preparation was accomplished through an ultrasound-assisted emulsification microextraction process (USAEME). The drugs were detected using a triple quadrupole tandem mass spectrometer by multiple reaction monitoring via an electrospray ionization source with positive ionization mode (ESI(+)). The results obtained by EC-MS were compared with conventional in vivo studies by analyzing urine samples from patients. Data from in vivo experiments showed good agreement with the data from electrochemical oxidation. Thus, EC-MS is very well-suited for the simulation of the oxidative metabolism of rivaroxaban, aliskiren, and prasugrel as well. Moreover, electrochemical conversion of target compounds appears to be a new in vitro technology for the prediction of potential metabolites.