Dental Arch Development of Chinese Adolescents: A Retrospective Cross-Sectional Study

INTRODUCTION AND AIMS

Understanding the patterns of dental arch development is crucial for precise diagnosis and management of malocclusion in adolescents. However, large-scale, region-specific analyses based on big data are scarce.This study aimed to identify the dental arch growth patterns of Chinese adolescents to refine early orthodontic treatment strategies.

METHODS

A retrospective cross-sectional analysis was conducted using 3D digital impressions from 5951 Chinese adolescents, collected between July 2020 and June 2021. AI-assisted measurements delineated dental arch dimensions, which were analyzed using locally weighted regression to chart developmental trends and Lasso regression to explore influencing factors, with a particular focus on geographical variances.

RESULTS

Significant differences in dental arch dimensions were observed between genders and across different latitudes. Males generally displayed larger arch dimensions than females of the same age. The dental arches experienced rapid growth before age 13.7 in males and 13.1 in females, with limited growth potential in later years, with regional disparities evident in the magnitude of dental arch dimensions. These variations were prominently associated with geographical latitude, underscoring the influence of environmental factors on dental arch development.

CONCLUSION

This comprehensive study provides valuable regional insights into the dental arch development of Chinese adolescents, facilitated by advanced AI methodologies. The fitted curves of age-specific dental arch offer valuable insights for optimizing early orthodontic treatment strategies. The findings advocate for region-tailored orthodontic planning and highlight the potential of AI in enhancing the precision of orthodontic treatment.

CLINICAL RELEVANCE

Our study of 5951 3D dental models reveals gender and geographical differences in arch growth, highlighting pre-teen rapid growth and later limitations, informing treatment planning.

Relationship Between Vertical Facial Patterns and Palatal Morphology in Class I and Class II Malocclusion

(1) The purpose of this study is to relate the bidimensional and tridimensional measures of the palate to the vertical facial pattern defined by the angle “SN-MP” between the mandibular plane and the anterior cranial base (Sella–Nasion/mandibular plane angle) in skeletal Class II untreated patients. Furthermore, the same palatal measures were used to compare Class II with Class I subjects. (2) A sample of 197 Class II Caucasian subjects (112 females and 85 males) with untreated skeletal Class II was collected retrospectively (from a private dental clinic specialized in orthodontics) and divided into two main groups according to the ANB angle: 74 Class I patients (0° ≤ ANB ≤ 4°) and 123 Class II patients (ANB > 4°). Class II subjects were furthermore divided into three groups depending on the angle SN-MP. Lateral cephalograms and digital 3D maxillary dental scans were available. Bidimensional and tridimensional measures were taken on each maxillary dental scan. The differences among the groups were analyzed for significance using a variance analysis. (3) A decrease in the posterior palatal height and an increase in the palatal surface area in Class I subjects were reported. The results showed a change in upper arch form, with a greater intermolar width in patients with a low SN-MP angle and a smaller one in high-angle patients. The more a Class II subject tended towards high-angle divergence, the narrower the palate was. (4) A greater posterior palatal height was found in Class II malocclusion, while greater surface area was noted in Class I malocclusion. In addition to this result, another statistical significance was detected in Class II malocclusion: the intermolar distance was greater in hypodivergent than in hyperdivergent patients. Similar volume values were noted across different malocclusions and vertical divergence groups. Palatal width seemed to be related to vertical facial pattern, while palatal height and area seemed to be related to sagittal malocclusions. These findings underscore the importance of considering palatal morphology variations in designing individualized orthodontic treatments, thereby improving patient-specific outcomes and broadening our understanding of skeletal Class II malocclusion.

Relationship of buccolingual inclination between the alveolar bone and first molar in different vertical facial types: A CBCT study

BACKGROUND

This study aimed to investigate the differences in the buccolingual inclination and transverse width of maxillary and mandibular first molars among different vertical facial types.

METHODS

In all, 78 samples were divided into three groups based on the GoGn-SN angle: the low-angle group (n = 26, mean age=24.21±5.11), average-angle group (n = 26, mean age=22.66±3.72), and high-angle group (n = 26, mean age=22.23±2.43). Cone beam computed tomography (CBCT) measurements were used to assess the buccolingual inclination of the axis of the maxillary and mandibular first molars, as well as the buccolingual inclination of the alveolar bone, the dental arch width, and the basal bone width. One-way ANOVA, the LSD test, and Pearson correlation analysis were performed.

RESULTS

The high-angle group showed significantly greater lingual inclination of the maxillary alveolar bone than the low-angle group and average-angle group (p < 0.001; p < 0.05). The difference in buccolingual inclination of the axis of the maxillary first molar and the alveolar bone was significantly greater in the high-angle group than in the low-angle group (p < 0.05). Both the maxillary and mandibular dental arch were significantly narrower in the high-angle group than in the other two groups. The mandibular basal bone was also significantly narrower in the high-angle group than in the low-angle group and average-angle group (p < 0.001; p < 0.01).

CONCLUSIONS

The alveolar bone of maxillary first molar in the high-angle group was more palatal inclined than that the low-angle group and the average-angle group, which suggests that orthodontists should pay more attention to the root-bone relationship in the high-angle group during expansion treatment to prevent bone fenestration and dehiscense.

Three-dimensional analysis of the positional relationship between the dentition and basal bone region in patients with skeletal Class I and Class II malocclusion with mandibular retrusion

Objective

This study aimed to determine the maxillary and mandibular basal bone regions and explore the three-dimensional positional relationship between the dentition and basal bone regions in patients with skeletal Class I and Class II malocclusions with mandibular retrusion.

Methods

Eighty patients (40 each with Class I and Class II malocclusion) were enrolled. Maxillary and mandibular basal bone regions were determined using cone-beam computed tomography images. To measure the relationship between the dentition and basal bone region, the root position and root inclination were calculated using the coordinates of specific fixed points by a computer program written in Python.

Results

In the Class II group, the mandibular anterior teeth inclined more labially (P < 0.05), with their apices positioned closer to the external boundary. The apex of the maxillary anterior root was positioned closer to the external boundary in both groups. Considering the molar region, the maxillary first molars tended to be more lingually inclined in females (P = 0.037), whereas the mandibular first molars were significantly more labially inclined in the Class II group (P < 0.05).

Conclusions

Mandibular anterior teeth in Class II malocclusion exhibit a compensatory labial inclination trend with the crown and apex relative to the basal bone region when mandibular retrusion occurs. Moreover, as the root apices of the maxillary anterior teeth are much closer to the labial side in Class I and Class II malocclusion, the range of movement at the root apex should be limited to avoid extensive labial movement.

Comparative evaluation of arch form among the Nepalese population: A morphological study

Aims

The study aims to identify sexual dimorphic features in the arch patterns based on tooth arrangement patterns and the maxillary and mandibular arches using Euclidean Distance Matrix Analysis (EDMA).

Settings and Design

A total of 96 Nepalese subjects, aged 18 to 25 were assessed using casts and photographs.

Materials and Methods

Thirteen landmarks representing the most facial portions of the proximal contact areas on the maxillary and mandibular casts were digitised. Seventy-eight possible, Euclidean distances between the 13 landmarks were calculated using the Analysis ToolPak of Microsoft Excel®. The male-to-female ratios of the corresponding distances were computed and ratios were compared to evaluate the arch form for variation in the genders, among the Nepalese population.

Statistical Analysis Used

Microsoft Excel Analysis ToolPak and SPSS 20.0 (IBM Chicago) were used to perform EDMA and an independent t-test to compare the significant differences between the two genders.

Results

The maxillary arch's largest ratio (1.008179001) was discovered near the location of the right and left lateral incisors, indicating that the anterior region may have experienced the greatest change. The posterior-molar region is where the smallest ratio was discovered, suggesting less variation. At the intercanine region, female arches were wider than male ones; however, at the interpremolar and intermolar sections, they were similar in width. Females' maxillary arches were discovered to be bigger antero-posteriorly than those of males. The highest ratio (1.014336113) in the mandibular arch was discovered at the intermolar area, suggesting that males had a larger mandibular posterior arch morphology. At the intercanine area, the breadth of the arch form was greater in males and nearly the same in females at the interpremolar and intermolar regions. Female mandibular arch forms were also discovered to be longer than those of males from the anterior to the posterior.

Conclusions

The male and female arches in the Nepalese population were inferred to be different in size and shape. With references to the landmarks demonstrating such a shift, the EDMA established objectively the presence of square arch forms in Nepali males and tapering arch forms in Nepalese females.

Statistical shape analysis of maxillary palatal morphology in patients with palatally displaced canines

OBJECTIVE

Maxillary morphology has long been a subject of interest due to its possible impact on palatally and labially displaced canines. This study aims to conduct a comparison of the palate morphology between individuals with palatal and labially displaced canines and control subjects using statistical shape analysis on a coronal cross-sectional of CBCT images.

MATERIALS AND METHODS

Patients aged between 12 and 43 years with palatally or labially displaced canines referred to Hamadan School of Dentistry between 2014 and 2019 were recruited for this retrospective study. The sample included 29 palatally displaced canines (PDC), 20 labially displaced canines (LDC), and 20 control groups (CG). Initially, the maxillary palate coronal section was acquired and landmarked in the region between the right and the left first molar. Procrustes and principal component analyses were used to identify the primary patterns of palatal shape variation. Statistical tests were then performed to examine both shape and size differences.

RESULTS

According to the results of Hotelling's T2 test, there is a significant difference between the mean shape of palate in PDC and CG (P = 0.009), while the difference between the PDC-LDC and LDC-CG groups is not significant. The longest full Procrustes distance was observed between PDC and CG (distance = 0.043), and the shortest full Procrustes distance was observed between LDC and CG (distance = 0.029). The first two principal components accounted for 84.47% of the total variance. The predictive accuracy of the discriminant analysis model showed that 72.46% of cases were correctly classified into the three study groups.

CONCLUSIONS

In terms of centroid size, there was no significant difference in the sectional area between the three groups, but the difference between the mean shape of palate in the PDC and CG groups was significant. The PDC group showed more prominent mid-palatal area in the molar region.

The Correlation between Mandibular Arch Shape and Vertical Skeletal Pattern

Background and Objectives: The aim of this study was to evaluate the correlation between the mandibular arch shape and the vertical skeletal pattern in growing patients. Materials and Methods: A total of 73 Caucasian patients (33 males and 40 females; mean age 9.4) were retrospectively enrolled from a pool of patients treated in chronological order at the Department of Orthodontics, University of Foggia, Italy, from April 2018 to December 2021. Each patient received a laterolateral radiograph and a digital scan of the dental arch. Eight cephalometric parameters (lower gonial angle, intermaxillary angle, divergence angle, Wits index, Jarabak ratio, OP-MP angle, PP-OP angle, and ANB) and five dental measurements (posterior mandibular arch width, anterior mandibular arch width, mandibular occlusal angle, posterior width on distobuccal molar cusps, and molar angle) were analyzed and then compared. A Spearman's rho correlation test between the cephalometric measurements and the dental measurements was performed. Statistical significance was set at p < 0.05. Results: A negative statistically significant correlation was found between the Jarabak ratio and the intermolar angle; a statistically significant correlation was also observed between the Wits index, the posterior mandibular width, and the occlusal mandibular angle; the ANB angle and the occlusal mandibular angle; the intermaxillary angle (PP-PM) and the mandibular occlusal angle, posterior mandibular width on the disto-vestibular cusp, and the intermolar angle; and the OP-MP angle and mandibular occlusal angle and the posterior mandibular width on the disto-vestibular cusp. Conclusions: The mandibular arch form may be related to certain predisposing features in craniofacial morphology, such as jaw divergence, the Jarabak ratio, and the intermaxillary angle.

Relationship between vertical facial morphology and dental arch measurements in class II malocclusion: a retrospective study

Background

To evaluate the relationship between dental arch measurements and the vertical facial pattern determined in skeletal Class II untreated patients.

Methods

Lateral cephalograms and plaster models were obtained from 124 untreated female adults (average age: 17.6 ± 3.8 years). Class I (CI), Class II Division 1 (CII/1) and Class II Division 2 (CII/2) malocclusions were divided into three subgroups according to their vertical morphology as hypodivergent, normodivergent and hyperdivergent. The multivariate variance analysis (MANOVA) method was used in the comparison of measurement values according to vertical and sagittal morphology. The relationship between both A point-Nasion-B point (ANB) and Frankfurt-mandibular plane (FMA) angles and dental arch measurements was examined by Pearson correlation analysis. The significance level was received as p < 0.05.

Results

While vertical morphology has a statistically significant effect on mandibular arch length, sagittal morphology affects maxillary arch depth. The parameters influenced by both morphologies are maxillary and mandibular arch length, as well as maxillary intermolar width. The mandibular arch length was significantly shorter in hyperdivergent-CII-2 malocclusion (50.5 ± 7.4 mm). Larger values were obtained in both mandibular arch length and maxillary arch depth measurements in CII-1 malocclusion compared to CII-2 malocclusion. The maxillary intermolar width was significantly shorter in hypodivergent-CII-1 malocclusion (46.8 ± 3.4 mm), while it was higher in hypodivergent-CI malocclusion (51.1 ± 3.4 mm). The maxillary arch length was the lowest in hyperdivergent-CI malocclusion (63.1 ± 13.3 mm) and the highest in hypodivergent-CI malocclusion (72.8 ± 7.6 mm). Additionally, a positive but weak correlation was found between ANB and FMA angles.

Conclusion

Dental arch measurements have been found to be affected by both vertical facial morphology and skeletal sagittal relationship. A positive correlation was found between ANB and FMA angles.

Accuracy of photogrammetric imaging versus conventional impressions for complete arch implant-supported fixed dental prostheses: A comparative clinical study

STATEMENT OF PROBLEM

Clinical studies on the accuracy of the photogrammetric imaging technique for complete arch implant-supported fixed dental prostheses are lacking.

PURPOSE

The purpose of this clinical study was to evaluate the accuracy (trueness) of photogrammetric imaging for complete arch implant-supported prostheses by comparing photogrammetric imaging with verified conventional splinted impressions.

MATERIAL AND METHODS

Completely edentulous arches with at least 4 implants were included. Both photogrammetric imaging and conventional splinted impressions were performed in each jaw. The conventional casts were verified and scanned by using a laboratory scanner as the control. The distances and angulations between different implants (interimplant distances and interimplant angulations) were measured in all photogrammetric and conventional standard tessellation language (STL) files by using a reverse-engineering software program. The distance deviations between the photogrammetric and conventional impressions of the same participant were calculated as the primary outcome, and the angular deviations were obtained as the secondary outcome with descriptive analyses. The comparison between distance deviations and the clinically acceptable level of deviations (150 μm) was conducted by using the 1-sample t test. The effect of interimplant distances, interimplant angulations, and jaw (maxilla or mandible) on deviations was analyzed by using the Spearman correlation analysis, Kruskal-Wallis test, or Student t test, depending on the type of data (α=0.05 for all tests).

RESULTS

Fourteen edentulous jaws were included. The overall distance deviation of photogrammetric imaging was 70 ±57 μm, significantly lower than the clinically acceptable level of misfit (150 μm; P<.001). The overall angular deviation was 0.432 ±0.348 degrees. The distance deviations were correlated with interimplant distances with a correlation coefficient (r) of 0.371 (P=.002). Interimplant angulation was not correlated with distance or angular deviations (P=.914, P=.914). Jaw was not correlated with distance or angular deviations either (P=.190, P=.209).

CONCLUSIONS

The accuracy (trueness) of photogrammetric imaging of complete arch implant-supported prostheses was within a clinically acceptable range of errors. Distance deviations increased with greater interimplant distances. Interimplant angulations and jaw (maxilla or mandible) had no significant effect on the accuracy of photogrammetric imaging.

Substantial Improvements in Facial Morphology through Surgical-Orthodontic Treatment: A Case Report and Literature Review

Background and Objectives: The long face type is associated with excessive vertical facial growth and most often with anterior open bite. In many cases of anterior open bite of high severity associated with bimaxillary dento-alveolar protrusion, lips are unable to form an adequate seal at rest. This leads to many issues, including facial dysmorphism. The aim of this study was to describe the case of a 15 year old girl who addressed the orthodontist in November 2015, having complaints related to the skeletal and dental open bite. Case Description: A 15.7 year old patient required a consultation with the orthodontic service for impaired dento-facial aesthetics at rest, smile and speech due to an exaggerated superior protrusion of the upper frontal teeth, labial incompetence with excessive gingival exposure at rest and smile associated with upper and lower anterior teeth crowding. The orthodontic diagnostic consisted of skeletal open bite with a hyperleptoprosop morphological facial type, high degree of hyperdivergence, bimaxillary dento-alveolar protrusion, 7 mm skeletal open-bite, 3 mm vertical inocclusion of the anterior teeth, skeletal class II relationships, bilateral half cusp class II molar and canine relationships, labial incompetence, highly increased interlabial gap, facial asymmetry, excessive gingival exposure of 7 mm at smiling and bimaxillary anterior crowding. Because the patient initially refused orthognathic surgery, prior to starting the orthodontic treatment, the patient was recommended to receive a bilateral extraction of the first upper premolars. Key objectives of pre-surgical orthodontic treatment were to achieve a retroclined position of the upper incisors under their normal inclination for the planned upward maxillary rotation, to maintain slightly lower incisor proclination. The orthognathic surgery consisted of Le Fort I impaction osteotomy with 8 mm anterior impactation, bilateral sagittal split osteotomy, and mandibular repositioning using occlusal splint. Conclusions: At the end of the orthodontic-surgical treatment, the patient presented significant improvement in dento-facial aesthetics, and optimal skeletal, muscular and dental balance.

Unexpected malocclusion in a 13,000-Year-old Late Pleistocene young woman from Mexico

To analyze the etiological factors behind the malocclusion of a Late Pleistocene woman (named Naia), who is the best-preserved of the earliest individuals of the American continent. The examination of Naia’s malocclusion was performed through cephalometric and occlusal analyses, and by measuring her mandible. Her data were then compared to published data for modern, medieval, and postmedieval samples and seven Late Pleistocene individuals. Naia presented her permanent dentition fully erupted, except for the impacted mandibular third molars. She presented a class II molar malocclusion with crowding. The dental widths and mandible measurements were similar to or smaller than modern standards. The degree of dental wear was light. The cephalometric analysis confirmed a skeletal class II relationship, with a retrusive mandible and protruded upper incisors. Naia’s mild level of dental wear is consistent with a low masticatory force, in a time when the norm was a high amount of grinding. The low masticatory forces help explain Naia’s small jaws and crowding. However, it does not clarify Angle’s class II relationship. Naia is an example that environmental factors are insufficient to explain the onset of malocclusions and emphasizes the importance of understanding hereditary factors’ role.

Comparative assessment of various cephalometric facial planes with intercanine width in orthodontic patients

OBJECTIVE:

The study was conducted to evaluate the relationship of various cephalometric skeletal patterns in the vertical and anteroposterior planes with intercanine width in untreated orthodontic patients.

METHOD AND MATERIAL:

This study included dental cast and cephalometric radiographs of 100 patients (69 females and 31 males) of the age range 13 to 33 years. Skeletal parameters including SNA, SNB, SNMP angles were found from lateral cephalometric radiographs. Intercanine widths including upper intercanine widths (UICW) and lower intercanine widths (LICW) were measured by a digital caliper.

RESULTS:

The correlation of intercanine width with SNA, SNB, and SNMP angles was analyzed by applying Pearson correlation coefficient. According to statistical analysis, the only insignificant correlation was analyzed between UICW with SNB and LICW with SN-MP.

CONCLUSIONS:

The overall result showed statistically significant relationship of various cephalometric skeletal patterns in the sagittal and vertical planes with intercanine width.

The relationship of maxillary arch dimension with vertical facial morphology in proto-malay race

OBJECTIVE:

DESIGN:

SETTING:

PARTICIPANTS:

METHODS:

RESULTS:

CONCLUSION:

Associations of sagittal malocclusions with dental arch characteristics and crowding in Northern Finland Birth Cohort 1966

OBJECTIVE

To analyse the associations between the widths and forms of dental arches, malocclusions and crowding in middle-aged adult population.

MATERIALS AND METHODS

The study material is part of the Northern Finland Birth Cohort 1966 (NFBC1966); the subjects were examined at the age of 46 years. A total of 781 adults with full dentition and no orthodontic treatment history were included. Overjet, overbite, cross-bite and scissor bite were examined during clinical examination. The widths and forms of dental arches, molar relationships and crowding were measured using three-dimensional (3D) dental models.

RESULTS

Dental arches were significantly larger in males than in females. Class II (CII) occlusion and increased overjet (≥6 mm) were associated with narrow maxilla (P < .001, P < .05 respectively). Subjects with lateral cross-bite had significantly narrower maxilla and wider mandible (P < .05) than subjects with normal lateral occlusion. In subjects with CII occlusion, square or tapered maxilla and tapered or ovoid mandible were significantly more frequent compared to subjects with Class I (CI) occlusion (P < .05). CII occlusion was significantly associated with crowding in the maxilla (P < .01).

CONCLUSION

Narrow and tapered-shaped maxilla was related to CII occlusion, which was associated with dental crowding in the maxilla. Malocclusions were more likely to be found together with other malocclusions than alone.

Relationship between dental and basal arch forms in mandibular anterior crowding

INTRODUCTION

Positive correlations between the mandibular dental and basal arch forms in patients with minimum crowding have been observed; however, the relationship in orthodontic patients with mandibular anterior crowding (MnAC) remains unclear. Therefore, we evaluated this relationship in patients with MnAC requiring premolar extraction.

METHODS

Thirty women with normal occlusion (mean age, 20.6 ± 2.5 years) and 30 women with Class I MnAC (mean age, 20.3 ± 2.9 years) were selected as control and MnAC groups, respectively. The widths and depths of the mandibular dental and basal arches at the FA and WALA points were measured and compared between groups. Relationships between the arch widths at the FA and WALA points were analyzed by Pearson correlation coefficient.

RESULTS

Larger variances were found for dental arch widths at canine and premolars and depth at canine in the MnAC group. Positive correlations were observed between dental and corresponding basal arch widths for both groups, except at the canine in the MnAC group, and higher correlations were observed between dental arch widths for all teeth except the first molar and basal arch widths for posterior adjacent teeth when comparing the corresponding basal arch widths.

CONCLUSIONS

The positive correlations observed between the dental and basal arch widths suggest the basal arch widths at the posterior adjacent tooth can be used as an additional reference to create an individualized postorthodontic dental arch form for MnAC patients.

Estimation of the Intercanine Width, Intermolar Width, Arch Length, and Arch Perimeter and Its Comparison in 12-17-year-old Children of Faridabad

Context

Dental arch morphology is an important consideration in the orthodontic treatment of dentofacial deformities. The size and shape of the arches have considerable implications in treatment planning, affecting space available, dental esthetics, and stability of dentition. The data provided by this study will be of considerable importance and relevance for practicing orthodontists and pedodontists in the region of Faridabad

Aim and objective

This study aims to determine and compare the intercanine width, intermolar width, arch length, and arch perimeter in the early adolescent group (12–14 years) and middle adolescent group (15–17 years) of Faridabad.

Materials and methods

Maxillary and mandibular impressions were made, study casts were prepared then the measurement of the individual intercanine widths, intermolar widths, arch length of maxillary and mandibular casts with the digital caliper, and arch perimeter with the help of brass wire was taken, obtained values were calculated, hence the results were evaluated.

Statistical analysis

Data were entered into a Microsoft Excel spreadsheet. It was analyzed using Statistical Package for Social Sciences (SPSS) version 21. Graphs were prepared using Microsoft Excel. Data were normally distributed as tested using the Shapiro-Wilk W test (p value was <0.05). Inferential statistics were performed using independent Student's t-test. The level of significance was set at 0.05.

Results

In the present study, all the parameters measured were increased in males in both the age-groups, i.e., the early adolescent group (12–14 years) and the mid adolescent group (15–17 years), and a significant increase was seen in the intercanine and intermolar widths in males.

How to cite this article

Singh S, Saraf BG, Indushekhar KR, et al. Estimation of the Intercanine Width, Intermolar Width, Arch Length, and Arch Perimeter and Its Comparison in 12–17-year-old Children of Faridabad. Int J Clin Pediatr Dent 2021;14(3):369–375.

Three-dimensional computed tomographic assessment of mandibular muscles in growing subjects with different vertical facial patterns

Aim

The present study was undertaken to assess the relationship between the mandibular muscles and dentofacial skeletal morphology in children with different underlying vertical facial patterns, using three-dimensional computed tomography (3D-CT).

Method

Thirty children (mean age 12.24 ± 1.57 years) underwent cranial CT examination for diagnostic purposes. 3D-CT images were reconstructed for the evaluation of the cross-sectional size, volume, and spatial orientation of the masseter and medial pterygoid muscles. These muscle parameters were also assessed in relation to the vertical facial pattern, gender and skeleto-dental form.

Results

Significant differences were found in muscular angulation for subjects with different underlying patterns. Greater masseter volumes were associated with increased facial width. Greater intermolar widths were found in brachyfacial subjects, with less acute muscular angulations in relation to horizontal reference lines, compared with dolichofacial subjects. This was also more obvious in the maxillary arch.

Conclusion

Clinicians should note the likely differences in masseter and medial pterygoid orientation and volume in subjects with different underlying vertical facial patterns and that these differences may, in turn, be related to both facial skeletal width and naturally-occurring transverse dental arch dimensions.

Maxillary width and hard palate thickness in men and women with different vertical and sagittal skeletal patterns

INTRODUCTION

The objective of this research was to compare maxillary width and hard palate thickness in men and women with different vertical and sagittal skeletal patterns.

METHODS

A total of 241 adults (93 men and 148 women aged from 18 to 25 years) were divided into male and female groups. Subjects were then separately divided into 3 sagittal skeletal groups and 3 vertical skeletal groups. A lateral cephalogram and a cone-beam computed tomography were taken for each subject. We measured the parameters to make statistical analyses and compared them between the different groups.

RESULTS

Women had smaller craniomaxillofacial bone width and palatal thickness than men. In sagittal groups, maxillary width, maxillary alveolar width, and external temporomandibular joint fossa width in Class II and Class III malocclusion groups were smaller than in the Class I group for both women and men. The internal temporomandibular joint fossa width was the same results in men and women. In vertical groups, palate thickness, maxillary width, and maxillary alveolar width of the high-angle group were smaller than those of the low-angle group, regardless of sex.

CONCLUSIONS

To an extent, maxillary width is correlated with vertical and sagittal skeletal patterns, and insufficient maxillary width would lead to unfavorable skeletal patterns. Differences exist in the morphology of craniomaxillofacial bone between men and women. Therefore, these findings can provide clinicians with references for differential diagnosis and treatment plans.

Dental arch form and interdental widths evaluation in adult Caucasian patients with obstructive sleep apnea syndrome

OBJECTIVE

To evaluate the hypothesis that dental arch form and inter-canine, inter-premolar, and inter-molar widths differ between OSAS patients and non-snoring, non-apneic controls.

METHODS

Dental digital models from 64 OSAS patients and 64 control subjects were used to obtain dental arch forms and to compare them between the two groups. Arch forms were extracted from the lower arch models using a professional graphics program and an orthodontic digital template. Through an orthodontic software, inter-molar, inter-premolar, and inter-canine widths were measured for both upper and lower arches.

RESULTS

The dental arch forms distribution differed between OSAS patients and controls. OSAS patients had reduced inter-canine, inter-premolar, and inter-molar widths for both arches compared to controls.

DISCUSSION

These results suggest that OSAS patients have narrower and more tapered arches than controls. Dental arch morphology and interdental widths differ between OSAS and control groups, supporting the hypothesis that they are an etiological factor.

Treatment of adult patient with hyperdivergent retrognathic phenotype and anterior open bite: report of a case with non-surgical orthodontic approach

Adult patients with anterior open bite and hyperdivergent retrognathic phenotype demand complex treatments, as premolar extractions, molar intrusion or orthognathic surgery. In the present clinical case, a young adult patient without significant growth, with Class I and anterior open bite, was treated with four premolar extractions. The therapeutic result shows good intercuspation, good facial esthetic, good function balance, and stability in a two-year post-fixed treatment follow-up.

Three-dimensional evaluation of smile characteristics in subjects with increased vertical facial dimensions

INTRODUCTION

Patients seeking orthodontic treatment often have esthetic concerns (ie, they want a better smile). Patients with increased vertical facial dimensions have different smile traits than other patients. This study aimed to compare the smile characteristics of subjects with different vertical facial dimensions and to use stereophotogrammetry to evaluate the changes in facial animation upon smiling.

METHODS

One hundred twenty adolescents and young adults (aged 15-25 years) who were referred for orthodontic treatment were divided into 2 groups according to their vertical facial height: increased (n = 30) and normal (n = 30). Three-dimensional stereophotogrammetric images were obtained from the patients during rest and smile. The images were superimposed, and the displacements of specific landmarks were recorded. Linear, angular, and proportional measurements were recorded on the smile and rest images.

RESULTS

When smiling, horizontal movement of commissures was less (right, P = 0.038; left, P = 0.009), upper lip elevation was higher (P = 0.014), and the upper lip was shorter (P = 0.014) in the vertical group than in the normal group. In the vertical group, the interlabial gap was increased both at rest and when smiling (P <0.001). Statistically significant differences were found in smile index (P = 0.001), nasolabial fold displacement (P = 0.018), and lip angles (both P = 0.001) between groups.

CONCLUSIONS

Group and sex differences were observed when smiling. Careful consideration of these differences will help clinicians in proper diagnosis and treatment planning.

Predictors of midpalatal suture expansion by miniscrew-assisted rapid palatal expansion in young adults: A preliminary study

OBJECTIVE

We sought to determine the predictors of midpalatal suture expansion by miniscrew-assisted rapid palatal expansion (MARPE) in young adults.

METHODS

The following variables were selected as possible predictors: chronological age, palate length and depth, midpalatal suture maturation (MPSM) stage, midpalatal suture density (MPSD) ratio, the sella-nasion (SN)-mandibular plane (MP) angle as an indicator of the vertical skeletal pattern, and the point A-nasion-point B (ANB) angle for anteroposterior skeletal classification. For 31 patients (mean age, 22.52 years) who underwent MARPE treatment, palate length and depth, MPSM stage and MPSD ratio from the initial cone-beam computed tomography images, and the SN-MP angle and ANB angle from lateral cephalograms were assessed. The midpalatal suture opening ratio was calculated from the midpalatal suture opening width measured in periapical radiographs and the MARPE screw expansion. Statistical analyses of correlations were performed for the entire patient group of 31 subjects and subgroups categorized by sex, vertical skeletal pattern, and anteroposterior skeletal classification.

RESULTS

In the entire patient group, the midpalatal suture opening ratio showed statistically significant negative correlations with age, palate length, and MPSM stage (r = -0.506, -0.494, and -0.746, respectively, all p < 0.01). In subgroup analyses, a strong negative correlation was observed with the palate depth in the skeletal Class II subgroup (r = -0.900, p < 0.05).

CONCLUSIONS

The findings of this study indicated that age, palate length, and MPSM stage can be predictors of midpalatal suture expansion by MARPE in young adults.

Prediction of dental arch width increase in the early mixed dentition using craniofacial parameters

BACKGROUND

The dimensions of the dental arch have considerable impact on treatment planning. Since the dental arch development has a relationship with the craniofacial growth, we designed a cohort study to find a regression model for predicting the mandibular arch width increase using craniofacial parameters.

METHODS

A total of 148 children, all in early mixed dentition, were selected randomly from primary schools by cluster sampling. Craniofacial anthropometric parameters were measured by a caliper bow and intercanine and intermolar widths were assessed on each subject's dental casts by a digital caliper at baseline and after 12 months. Data were analyzed with SPSS v. 15. Student's t-test and linear regression test were applied separately for girls and boys.

RESULTS

Out of 153 children, 148 returned for one-year follow-up meeting the inclusion criteria. The results of regression analysis showed a significant inverse correlation between intercanine width and facial index. The bigonial dimension showed a high correlation with both the intermolar width and the intercanine width increase.

CONCLUSIONS

We found that the arch width increase in the early mixed dentition could be predicted precisely based on certain craniofacial parameters.

Morphometric covariation between palatal shape and skeletal pattern in children and adolescents: a cross-sectional study

Objective

To assess shape covariation of the palate and craniofacial complex (CFC) in children and adolescents.

Methods

Pre-treatment lateral cephalometric radiographs and corresponding maxillary casts of 100 children (8-10 years) and 100 adolescents (15-20 years) were digitized. Exclusion criteria were previous orthodontic treatment, craniofacial syndromes, mouth breathing, finger sucking, crossbite, tooth agenesis, and tooth impaction. Palatal shape was described with 239 surface and curve semilandmarks and craniofacial shape with 10 fixed landmarks and 117 curve semilandmarks. Procrustes superimposition and principal component analysis were applied for evaluation of shape variability. Shape covariation between palate and CFC was assessed with partial least squares analysis.

Results

The first five principal components explained 77 per cent (palate) and 60 per cent (CFC) of total shape variability. The palate varied mainly in height (adolescent group) and width-length (both groups), whereas the CFC varied mainly in the vertical dimension. Significant covariation was found between the craniofacial and palatal components (RV coefficient: 0.27, children; RV: 0.23, adolescents). Variation of the CFC in the vertical and anteroposterior direction was mainly related to variation in the height-width and the width-length ratio of the palate, respectively.

Limitations

The use of lateral cephalometric radiographs eliminated the transverse dimension from the craniofacial shape analysis. The study was cross-sectional, so the observed intergroup differences should be interpreted with caution.

Conclusions

Covariation strength and pattern were similar in children and adolescents. The closer a subject was to the high-angle end of the variability spectrum, the higher and narrower was the palate, and conversely.

Three-dimensional analysis of dental arch forms in Italian population

BACKGROUND

The aim of this study was the comparison of male and female upper and lower dental arch form in untreated Italian patients by 3D analysis, to find differences in shape, in transversal and longitudinal diameters between sexes, and to give a representative set of population's dental arch to clinicians in order to provide suitable orthodontic treatment.

METHODS

The sample consisted of 3D scans of dental casts deriving from 104 Italian untreated patients (Male = 35, Female = 69) in permanent dentition. An evaluation of the arch form was performed by angular and linear values on every patient using a 3D software (SolidWorks®). A Student's two-tailed t test was used to determine if the differences in measurements between the male and female groups were significant and the level of significance was set at P < 0.05.

RESULTS

Statistically significant differences in upper and lower transversal and longitudinal diameters were found. Male arch widths were significantly larger than those of females. Male intercanine, intermolar, and interpremolar diameters were significantly greater than females. Dental arch depth was significantly smaller in the female group. Anterior upper dental arch form was flatter, wider, and less sharp in the female group.

CONCLUSIONS

Basing on the anatomical arches differences found between sexes concerning Italian patients, it is suggested to have regard to each patient pre-treatment arch form, width, and depth during orthodontic treatment according to gender.

Three-dimensional evaluation of dentofacial transverse widths in adults with different sagittal facial patterns

INTRODUCTION

The aim of this study was to evaluate the dentofacial transverse dimensions of subjects with different sagittal facial patterns using 3-dimensional cone-beam computed tomography images.

METHODS

Cone-beam computed tomography images of 63 men and 80 women were divided into skeletal Class I, Class II, and Class III groups. Skeletal and dental evaluations were made on frontal views and coronal cross-sections of the images. Independent 2-sample t tests and 1-way analysis of variance followed by post hoc Tukey tests were used for sex and group differences. Pearson correlation analysis was used to identify factors related to changes in ANB angle.

RESULTS

The Class II subjects did not show differences in maxillomandibular width and maxillary width compared with Class I subjects; however, their maxillary molars were more lingually tipped. The Class III subjects showed greater maxillomandibular width differences and smaller maxillary widths and maxillary buccolingual alveolar widths at midroot level compared with Class I subjects. The maxillary molars were buccally inclined, and the mandibular molars were lingually compensated in Class III subjects. The ANB angle showed positive correlations with jugal process width, maxillary width, and maxillary buccolingual alveolar width at midroot level as well as mandibular molar buccal inclination; negative correlations were found in maxillomandibular width difference, mandibular width at midroot level, and maxillary molar buccal inclination.

CONCLUSIONS

A relative comparison of Class I, Class II, and Class III subjects showed that dental compensation had occurred to overcome the transverse skeletal discrepancies in the maxillary posterior segments of Class II and Class III subjects. This could escalate unidentified periodontal and functional problems in the long term. Future studies of transverse dentofacial dimensions, including periodontal evaluations and occlusal forces, would be useful for delivering proper orthodontic treatment for skeletal Class II and Class III subjects.

Analysis of the correlation between dental arch and articular eminence morphology: a cone beam computed tomography study

OBJECTIVE

The aim of the study was to assess the correlation between the morphology of the dental arches (DAs) of patients with normal occlusion and of the articular eminence (AE) by using cone beam computed tomography (CBCT).

STUDY DESIGN

CBCT scans of 60 patients were evaluated in terms of height and inclinations (angles α, β, and δ) of the AE. DAs were classified according to their shapes (tapered, square, ovoid), and their perimeters, widths, and depths were measured. One-way analysis of variance, Pearson's correlation coefficients, and simple and multivariate linear regression models were used for the calculations.

RESULTS

The ovoid arch was the most predominant shape (n = 66/120). Inclination of the AE (angle β) had the greatest difference between DA shapes, with this angle usually being greater in the ovoid arch and smaller in the square arch (P < .05). The height of the AE presented greater correlation with DA measurements, with tapered arches having the most significant correlations (P < .05). DA depth had no influence on AE measurements (P > .05). The perimeter and width of the DAs had some influence (P < .05).

CONCLUSIONS

Correlations were found between the DA and AE morphologies. The correlations should be taken into consideration, although the results do not prove absolute association between the variables. Whenever possible, the morphologic features of DAs should be preserved to avoid possible changes in AE.

Automatic gender determination from 3D digital maxillary tooth plaster models based on the random forest algorithm and discrete cosine transform

BACKGROUND AND OBJECTIVE

One of the first stages in the identification of an individual is gender determination. Through gender determination, the search spectrum can be reduced. In disasters such as accidents or fires, which can render identification somewhat difficult, durable teeth are an important source for identification. This study proposes a smart system that can automatically determine gender using 3D digital maxillary tooth plaster models.

METHODS

The study group was composed of 40 Turkish individuals (20 female, 20 male) between the ages of 21 and 24. Using the iterative closest point (ICP) algorithm, tooth models were aligned, and after the segmentation process, models were transformed into depth images. The local discrete cosine transform (DCT) was used in the process of feature extraction, and the random forest (RF) algorithm was used for the process of classification.

RESULTS

Classification was performed using 30 different seeds for random generator values and 10-fold cross-validation. A value of 85.166% was obtained for average classification accuracy (CA) and a value of 91.75% for the area under the ROC curve (AUC).

CONCLUSIONS

A multi-disciplinary study is performed here that includes computer sciences, medicine and dentistry. A smart system is proposed for the determination of gender from 3D digital models of maxillary tooth plaster models. This study has the capacity to extend the field of gender determination from teeth.

Estimating effects of craniofacial morphology on gingival recession and clinical attachment loss

OBJECTIVES

Evidence on possible associations between facial morphology, attachment loss and gingival recession is lacking. We analysed whether the facial type, which can be described by the ratio of facial width and length (facial index), is related to periodontal loss of attachment, hypothesizing that a broad face might be associated with less gingival recession (GR) and less clinical attachment loss (CAL) than a long face.

MATERIALS AND METHODS

Data from the 11-year follow-up of the population-based Study of Health in Pomerania were used. Periodontal loss of attachment was assessed by GR and CAL. Linear regression models, adjusted for age and gender, were used to assess associations between specific landmark based distances extracted from magnetic resonance imaging head scans and clinically assessed GR or CAL (N = 556).

RESULTS

Analysing all teeth, a higher maximum cranial width was associated with a lower mean GR (B = -0.016, 95% CI: -0.030; -0.003, p = 0.02) and a lower mean CAL (B = -0.023, 95% CI: -0.040; -0.005, p = 0.01). Moreover, a long narrow face was significantly associated with increased mean GR and CAL (facial index, P for trend = 0.02 and p = 0.01, respectively). Observed associations were more pronounced for incisors and canines than for premolars and molars.

CONCLUSION

This study revealed craniofacial morphology, specifically the cranial width and the facial index, as a putative risk factor for periodontal loss of attachment.

Clinical Measurement of Maximum Mouth Opening in Children of Kolkata and Its Relation with Different Facial Types

INTRODUCTION

Maximal opening of mouth is described as the greatest distance between incisal edge of maxillary central incisor to the incisal edge of mandibular central incisor, when the mouth is opened as wide as possible painlessly or as the inter incisal distance plus the overbite. Clinical measurement of normal range of Maximum Mouth Opening (MMO) in children is an important diagnostic criterion for evaluation of stomatognathic system, especially for those with temporomandibular and neurogenic dysfunctions.

AIM

To determine the correlation of maximal mouth opening with age, sex, height, body weight and different facial types.

MATERIALS AND METHODS

The study was a cross-sectional study which was conducted on 434 children, who were randomly divided into three groups based on their age: Group I- children of age 6 to 8 years, Group II- children of age 8.1 to 10 years, Group III- children of age 10.1 to 12 years. For each child, the examiner took three readings of MMO in millimeters (mm) and the mean of the three readings was considered. Age, sex, standing height, body weight and facial type of each child were also recorded simultaneously. Pearson correlation was used to determine the relationship between the different parameters. p-value <0.05 was the bench mark for statistical significance in the analysis. Descriptive and inferential analysis was done for the data using SPSS version 20.0. (SPSS 20, inc.; Chicago).

RESULTS

The estimated average MMO measured for girls and boys in the age range of 6-8 years, with a total sample size of 139, was 41.14 ± 4.29 mm and 42.16 ± 3.98mm respectively in euryprosopic face type. In leptoproscopic face type, it was 42.12 ± 4.54mm and 43.76 ± 3.80 mm in girls and boys respectively. In mesoproscopic face type, MMO measured was 41.77 ± 4.09mm and 42.51 ± 3.95 mm in girls and boys respectively. The estimated average MMO measured for girls and boys in the age range of 8.1-10 years, with a total sample size of 143, was 44.42+4.69mm and 43.30 ± 4.11 mm in euryprosopic face type. In leptoproscopic face type, it was 43.02 ± 3.92mm and 46.29 ±3.09mm in girls and boys respectively. In mesoproscopic face type, MMO measured was 42.50 ±4.32 and 42.80 ± 5.16 mm in girls and boys respectively. The estimated average MMO measured for girls and boys in the age range of 10.1-12 years, with a total sample size of 152, was 44.63 ± 5.28 mm and 45.80 ± 5.18 mm respectively in euryprosopic face type. In leptoproscopic face type, it was 45.76 ± 4.98 mm and 46.28 ± 4.68 mm in girls and boys respectively. In mesoproscopic face type, MMO measured was 45.32 ± 5.80 mm and 46.03 ± 5.86 mm in girls and boys respectively.

CONCLUSION

There was a significant difference in MMO between males and females; with males having higher values in all age groups. MMO is seen to increase with age in a statistically significant manner. Significantly increased value of MMO was observed in leptoproscopic face type in comparison to euryproscopic and mesoproscopic face type for each age group.

Correlation between symphyseal morphology and mandibular growth

Background:

This study sought to assess symphyseal morphology in adolescents with different mandibular growth patterns (MGPs) in order to see if a relation exists.

Materials and Methods:

In this study the symphyseal parameters (height, depth, and ratio) of normal subjects were compared with four groups with malocclusion (cl III vertical, cl II vertical, cl III horizontal, and cl II horizontal). These groups (15 samples each) were matched (for sex and cervical maturation stage [CVMS]) based on their cephalograms and patient charts. Growth patterns were differentiated by seven vertical parameters and the Wylie analysis. After confirmation of normality of the groups and similarity of their variances the two-way analysis of variance (ANOVA) was used for analysis of data assessed by adjusted chi-square (P < 0.001). The comparison of cases with the normal group was performed by the Dunnett method. Intraclass Correlation Coefficient (ICC) was used for evaluation of intraobserver reliability.

Results:

We found the symphyseal ratio to have a significant correlation with the MGP (P < 0.001). The symphyseal ratio (Height/Depth) was small in a mandible with vertical growth pattern Cl II or Cl III. Conversely, a horizontal growth pattern of a Cl II or Cl III mandible was associated with a larger ratio of the symphysis in comparison with the normal group. The symphyseal ratio was also found to be greater in females.

Conclusion:

The symphyseal ratio was found to be strongly associated with the MGP.

Relationship between vertical facial patterns and dental arch form in class II malocclusion

Background

The purpose of this study is to evaluate the relationship between dental arch form and the vertical facial pattern determined by the angle between the mandibular plane and the anterior cranial base (Sella-nasion/mandibular plane angle (SN-MP)) in skeletal class II untreated patients.

Methods

A sample of 73 Caucasians patients with untreated skeletal class II in permanent dentition was divided into three groups according to the values of the angle SN-MP. An evaluation of the arch form was performed by angular and linear relation values on each patient. Regression analysis was used to determine the statistical significance of the relationships between SN-MP angle and dental arch form. The differences among the three groups were analyzed for significance using a variance analysis.

Results

A decrease of the upper arch transversal diameters in high SN-MP angle patients and an increase in low angle SN-MP ones (P < 0.05) were shown. Result analysis showed a change in upper arch shape, with a smaller intercanine width in patients with high SN-MP angle and a greater one in low angle patients. As SN-MP angle increased, the upper arch form tended to be narrower. No statistically significant difference in mandibular arch form among the three groups was found, except the angle value related to incisors position.

Conclusions

The results showed the association between the upper dental arch form and the vertical facial pattern. On the contrary, the lower arch form was not related to the mandibular divergence.

Median mandibular flexure at different mouth opening and its relation to different facial types: A prospective clinical study

Objective:

To measure the arch width and Median mandibular flexure (MMF) values at relative rest and maximum jaw opening in young adults with Dolichofacial, Mesofacial, and Brachyfacial types and tested whether the variation in the facial pattern is related to the MMF values in South Indian population.

Materials and Methods:

This Prospective clinical study consisted of sample of 60 young adults. The subjects were grouped into 3 groups: Group 1: Brachyfacial, Group 2: Mesofacial and types, Group 3: Dolichofacial. Impressions were taken for all the 60 subjects and the casts were scanned and digitized. The intermolar width was measured for Dolichofacial, Mesofacial, and Brachyfacial subjects at relative rest (R) and maximum opening (O).

Results:

The statistical analysis of the observations included Descriptive and Inferential statistics. The statistical analysis was executed by means of Sigma graph pad prism software, USA Version-4. Kruskal wallis (ANOVA) followed by Dunns post hoc test was performed. Mann Whitney U-test was performed to assess the difference in MMF values between Males and Females of the three groups. The Mean (SD) Mandibular flexure in individuals with Brachyfacial type was 1.12 (0.09), Mesofacial type was 0.69 (0.21), and Dolichofacial type was 0.39 (0.08).

Conclusions:

The Mean intermolar width was maximum in Brachyfacial type and minimum in Dolichofacial type. MMF was maximum at the maximum mouth opening position and was maximum in individuals with Brachyfacial type.

Is maxillary dental arch constriction common in Japanese male adult patients with obstructive sleep apnoea?

OBJECTIVES Little is known about the contributions of a narrow maxillary dental arch and maxillary skeletal constriction to the development of obstructive sleep apnoea (OSA). Therefore, the purpose of this study was to clarify the relationships between maxillary dental arch width and OSA and between maxillary skeletal constriction and OSA in Japanese male patients.METHODS Study models for 164 Japanese male OSA patients were fabricated for dental arch analyses. We compared the patients' dental arch widths with the standard value for Japanese males. Moreover, the associations between the upper dental arch width and the apnoea-hypopnoea index (AHI), body mass index, skeletal pattern (SNA, SNB, and ANB), cross-sectional area of tongue obtained from an upright lateral cephalogram, lower dental arch width, overjet, and overbite were also examined.RESULTS Although a narrower upper dental arch was associated with severer OSA, the upper dental arch in OSA patients was not significantly narrower than the Japanese standard value. However, the results of a multiple regression analysis revealed that the upper dental arch became narrower as the mandible was positioned more rearward relative to the maxilla.CONCLUSIONS We conclude that dental arch constriction in the maxilla could be associated with the development of OSA but is not a typical feature of our sample of Japanese OSA patients. Moreover, the factor that aggravates OSA is not maxillary skeletal constriction but rather maxillary dental arch constriction related to antero-posterior skeletal discrepancy.

Dento-facial relationships in individuals with normal occlusion

The aim of this study was to evaluate the relationships of selected facial measurements with mesio-distal crown widths and dental arch dimensions in individuals with normal occlusions. A cross-sectional study was conducted on 276 subjects with Angle's Class I normal occlusions. Three-dimensional images of the face and dental casts were captured and analyzed using stereophotogrammetric systems. Significant correlations were found between the sagittal facial variables and both upper and lower dental arch dimensions and to lesser degree with the horizontal and vertical variables. The values of correlation coefficients calculated between facial and dental crown measurements ranged from .01 to .50 for upper teeth and .01 to .49 for lower teeth. The values of correlation coefficients between facial and upper dental arch dimensions ranged from .01 to .55 and those between facial and lower dental arch dimensions ranged from .01 to .60. A principal components analysis showed that the sagittal dimensions, face height, nose, labial fissure, binocular widths were positively associated with dental arch dimensions and mesio-distal crown diameters in males. On the other hand, only the sagittal variables were associated with dental dimensions in females. The results of this study confirm that positive associations exist between facial and dental arch dimensions. These relationships should be taken into consideration when attempts are made to modify dental arch size as part of orthodontic treatment. Moreover, these relationships are also relevant to prosthodontists involved with selecting tooth sizes that display optimal functional balance with the craniofacial structures.

Evaluation of arch width variations among different skeletal patterns in South Indian population

Background:

Anterior cranial base can be taken as a reference line (SN) to determine the steepness of mandibular plane. Subjects with high mandibular plane angle tend to have a long face and one with low MP-SN angle has a shorter face.

Objective:

This study was done to investigate if dental arch widths correlated with vertical facial types and if there are any differences in arch widths between untreated male and female adults in South Indian population.

Materials and Methods:

Lateral cephalogram and dental casts were obtained from 180 untreated South Indian adults (90 males and 90 females) above 18 year old with no cross bite, minimal crowding and spacing. The angle between the anterior cranial base and the mandibular plane was measured on lateral cephalogram of each patient. Dental casts were used to obtain comprehensive dental measurements including maxillary and mandibular inter canine, inter premolar and inter molar widths, as well as amount of crowding or spacing.

Results:

The results showed that male arch widths were significantly larger than those of females (P < 0.05) and there was a significant decrease in inter arch width as the MP-SN angle increased in untreated adult South Indian population. The results obtained in our study when compared with studies done in other population groups showed that there is difference in inter arch widths according to ethnicity and race.

Conclusion:

It was concluded that the dental arch width is associated with gender, race and vertical facial morphology. Thus using individualized arch wires according to each patient's pre treatment arch form and width is suggested during orthodontic treatment.

Intra-arch widths: a meta-analysis

OBJECTIVE

To determine and compare the mean values of various intra-arch distances in Class I, Class II division 1 and Class II division 2 patients.

MATERIALS AND METHODS

The search engines PubMed, Embrace and Cochrane were employed to select articles for further study, and the sample thereby selected comprised adult subjects with full permanent dentition, without missing teeth, malformations or previous orthodontic treatment. Only subjects from articles published during the last 10 years were included in the study.

RESULTS

The search located a total of 628 articles regarding arch form. However, only eight articles were chosen for the study. We observed that: the distance between mandibular canines is smaller in Class I than in Class II division 1; mandibular inter-molar distance is similar in Class I and Class II division 1; maxillary inter-canine distance is similar in Class I, Class II division 2 and Class II division 1; maxillary inter-premolar width is greater in Class I than in Class II division 1; and that maxillary inter-molar width is similar in Class I and Class II division 2.

CONCLUSIONS

No statistically significant differences in arch width were found between the different classes analysed (there are only slightly differences between classes), except in the case of mandibular inter-canine width (L3), which was smaller in Class I than in Class II,1, and maxillary inter-premolar width (U4), which was smaller in Class II-I than in Class I.

Making three-dimensional Monson's sphere using virtual dental models

OBJECTIVES

The Monson's sphere and curve of Wilson can be used as reference for prosthetic reconstructions or orthodontic treatments. This study aimed to generate and measure the three-dimensional (3-D) Monson's sphere and curve of Wilson using virtual dental models and custom software.

METHODS

Mandibular dental casts from 79 young adults of Korean descent were scanned and rendered as virtual dental models using a 3-D digitizing scanner. 26 landmarks were digitized on the virtual dental models using a custom made software program. The Monson's sphere was estimated by fitting a sphere to the cusp tips using a least-squares method. Two curves of Wilson were generated by finding the intersecting circle between the Monson's sphere and two vertical planes orthogonal to a virtual occlusal plane. Non-parametric Mann-Whitney and Kruskal-Wallis tests were performed to test for difference between sex and in cusp number within tooth position.

RESULTS

The mean radius of Monson's sphere was 110.89 ± 25.75 mm. There were significant differences between males and females in all measurements taken (p<0.01), within 16.87-17.27 mm. Furthermore, morphological variation derived from variability in cusp number in the second premolar and second molar were not found to influence occlusal curvature (p>0.05).

CONCLUSIONS

This study describes a best-fit algorithm for generating 3-D Monson's sphere using occlusal curves quantified from virtual dental models. The radius of Monson's sphere in Korean subjects was greater than the original four-inch value suggested by Monson.

CLINICAL SIGNIFICANCE

The Monson's sphere and curve of Wilson can be used as a reference for prosthetic reconstruction and orthodontic treatment. The data found in this study may be applied to improve dental treatment results.