Poly(3-hydroxybutyrate) hyperproduction by a global nitrogen regulator NtrB mutant strain of Paracoccus denitrificans PD1222

Natural Polyhydroxyalkanoates-An Overview of Bacterial Production Methods

Polyhydroxyalkanoates (PHAs) are intracellular biopolymers that microorganisms use for energy and carbon storage. They are mechanically similar to petrochemical plastics when chemically extracted, but are completely biodegradable. While they have potential as a replacement for petrochemical plastics, their high production cost using traditional carbon sources remains a significant challenge. One potential solution is to modify heterotrophic PHA-producing strains to utilize alternative carbon sources. An alternative approach is to utilize methylotrophic or autotrophic strains. This article provides an overview of bacterial strains employed for PHA production, with a particular focus on those exhibiting the highest PHA content in dry cell mass. The strains are organized according to their carbon source utilization, encompassing autotrophy (utilizing CO2, CO) and methylotrophy (utilizing reduced single-carbon substrates) to heterotrophy (utilizing more traditional and alternative substrates).

Eliminating genes for a two-component system increases PHB productivity in Cupriavidus basilensis 4G11 under PHB suppressing, nonstress conditions

Species of bacteria from the genus Cupriavidus are known, in part, for their ability to produce high amounts of poly-hydroxybutyrate (PHB) making them attractive candidates for bioplastic production. The native synthesis of PHB occurs during periods of metabolic stress, and the process regulating the initiation of PHB accumulation in these organisms is not fully understood. Screening an RB-TnSeq transposon library of Cupriavidus basilensis 4G11 allowed us to identify two genes of an apparent, uncharacterized two-component system, which when omitted from the genome enable increased PHB productivity in balanced, nonstress growth conditions. We observe average increases in PHB productivity of 56% and 41% relative to the wildtype parent strain upon deleting each gene individually from the genome. The increased PHB phenotype disappears, however, in nitrogen-free unbalanced growth conditions suggesting the phenotype is specific to fast-growing, replete, nonstress growth. Bioproduction modeling suggests this phenotype could be due to a decreased reliance on metabolic stress induced by nitrogen limitation to initiate PHB production in the mutant strains. Due to uncertainty in the two-component system's input signal and regulon, the mechanism by which these genes impart this phenotype remains unclear. Such strains may allow for the use of single-stage, continuous bioreactor systems, which are far simpler than many PHB bioproduction schemes used previously, given a similar product yield to batch systems in such a configuration. Bioproductivity modeling suggests that omitting this regulation in the cells may increase PHB productivity up to 24% relative to the wildtype organism when using single-stage continuous systems. This work expands our understanding of the regulation of PHB accumulation in Cupriavidus, in particular the initiation of this process upon transition into unbalanced growth regimes.

Paracoccus onchidii sp. nov., a moderately halophilic bacterium isolated from a marine invertebrate from the South China Sea

A novel moderately halophilic bacterial strain, designated Z330^T, was isolated from the egg of a marine invertebrate of the genus Onchidium collected in the South China Sea. The 16S rRNA gene sequence of strain Z330^T exhibited the highest similarity value to that of the type strain Paracoccus fistulariae KCTC 22803^T (97.6%), Paracoccus seriniphilus NBRC 100798^T (97.6%) and Paracoccus aestuarii DSM 19484^T (97.6%). Phylogenomic and 16S rRNA phylogenetic analysis showed that strain Z330^T was most closely related to P. seriniphilus NBRC 100798^T and P. fistulariae KCTC 22803^T. Strain Z330^T grew optimally at 28-30 °C, pH 7.0-8.0 with the presence of 5.0-7.0% (w/v) NaCl. In addition, growth of strain Z330^T occurred at 0.5-16% NaCl, indicated strain Z330^T was a moderately halophilic and halotolerant bacterium of genus Paracoccus. The predominant respiratory quinone in strain Z330^T was identified as ubiquinone-10. The major polar lipids of strain Z330^T were phosphatidylcholine, phosphatidylglycerol, diphosphatidylglycerol, phosphatidylethanolamine, phosphatidylmonomethylethanolamine, glycolipid and six unidentified polar lipids. The major fatty acids of strain Z330^T was summed feature 8 (C_18:1 ω6c and/or C_18:1 ω7c). The draft genome sequence of strain Z330^T includes 4,084,570 bp in total (N50 = 174,985 bp) with a medium read coverage of 463.6 × and 83 scaffolds. The DNA G + C content of strain Z330^T was 60.5%. In silico DNA-DNA hybridization with the four type strains showed 20.5, 22.3, 20.1 and 20.1% relatedness to Paracoccus fistulariae KCTC 22803^T, Paracoccus seriniphilus NBRC 100798^T, Paracoccus aestuarii DSM 19484^T and Paracoccus denitrificans 1A10901^T, respectively. And the average nucleotide identity (ANIb) values between strain Z330^T and these four type strains were 76.2, 80.0, 75.8 and 73.8%, respectively, lower than the 95-96% threshold value for dividing prokaryotic species. On the basis of the phenotypic, phylogenetic, phylogenomic and chemotaxonomic properties, a novel species of the genus Paracoccus, Paracoccus onchidii sp. nov. is proposed with the type strain Z330^T (= KCTC 92727^T = MCCC 1K08325^T).

The NtrYX Two-Component System of Paracoccus denitrificans Is Required for the Maintenance of Cellular Iron Homeostasis and for a Complete Denitrification under Iron-Limited Conditions

Denitrification consists of the sequential reduction of nitrate to nitrite, nitric oxide, nitrous oxide, and dinitrogen. Nitrous oxide escapes to the atmosphere, depending on copper availability and other environmental factors. Iron is also a key element because many proteins involved in denitrification contain iron-sulfur or heme centers. The NtrYX two-component regulatory system mediates the responses in a variety of metabolic processes, including denitrification. A quantitative proteomic analysis of a Paracoccus denitrificans NtrY mutant grown under denitrifying conditions revealed the induction of different TonB-dependent siderophore transporters and proteins related to iron homeostasis. This mutant showed lower intracellular iron content than the wild-type strain, and a reduced growth under denitrifying conditions in iron-limited media. Under iron-rich conditions, it releases higher concentrations of siderophores and displayes lower nitrous oxide reductase (NosZ) activity than the wild-type, thus leading to nitrous oxide emission. Bioinformatic and qRT-PCR analyses revealed that NtrYX is a global transcriptional regulatory system that responds to iron starvation and, in turn, controls expression of the iron-responsive regulators fur, rirA, and iscR, the denitrification regulators fnrP and narR, the nitric oxide-responsive regulator nnrS, and a wide set of genes, including the cd₁-nitrite reductase NirS, nitrate/nitrite transporters and energy electron transport proteins.

Harnessing taxonomically diverse and metabolically versatile genus Paracoccus for bioplastic synthesis and xenobiotic biodegradation

The genus Paracoccus represents a taxonomically diverse group comprising more than 80 novel species isolated from various pristine and polluted environments. The species are characterized as coccoid shaped Gram-negative bacteria with versatile metabolic attributes and classified as autotrophs, heterotrophs and/or methylotrophs. Present study highlights the up-to-date global taxonomic diversity and critically discusses the significance of genome analysis for identifying the genomic determinants related to functional attributes mainly bioplastic synthesis and biodegradation potential that makes these isolates commercially viable. The analysis accentuates polyphasic and genomic attributes of Paracoccus spp. which could be harnessed for commercial applications and emphasizes the need of integrating genome based computational analysis for evolutionary species and functional diversification. The work reflects on the underexplored genetic potential for bioplastic synthesis which can be harnessed using advanced genomic methods. It also underlines the degradation potential and possible use of naturally-occurring pollutant-degrading Paracoccus isolates for development of biodegradation system and efficient removal of contaminants. The work contemplates plausible use of such potent isolates to establish the plant-microbe interaction, contributing towards contaminated land reclamation. Overall; the work signifies need and application of genome analysis to identify and explore prospective potential of Paracoccus spp. for environmental application towards achieving sustainability.

Sea-Ice Bacteria Halomonas sp. Strain 363 and Paracoccus sp. Strain 392 Produce Multiple Types of Poly-3-Hydroxyalkaonoic Acid (PHA) Storage Polymers at Low Temperature

Poly-3-hydroxyalkanoic acids (PHAs) are bacterial storage polymers commonly used in bioplastic production. Halophilic bacteria are industrially interesting organisms, as their salinity tolerance and psychrophilic nature lowers sterility requirements and subsequent production costs. We investigated PHA synthesis in two bacterial strains, Halomonas sp. 363 and Paracoccus sp. 392, isolated from Southern Ocean sea ice and elucidated the related PHA biopolymer accumulation and composition with various approaches, such as transcriptomics, microscopy, and chromatography. We show that both bacterial strains produce PHAs at 4°C when the availability of nitrogen and/or oxygen limited growth. The genome of Halomonas sp. 363 carries three phaC synthase genes and transcribes genes along three PHA pathways (I to III), whereas Paracoccus sp. 392 carries only one phaC gene and transcribes genes along one pathway (I). Thus, Halomonas sp. 363 has a versatile repertoire of phaC genes and pathways enabling production of both short- and medium-chain-length PHA products. IMPORTANCE Plastic pollution is one of the most topical threats to the health of the oceans and seas. One recognized way to alleviate the problem is to use degradable bioplastic materials in high-risk applications. PHA is a promising bioplastic material as it is nontoxic and fully produced and degraded by bacteria. Sea ice is an interesting environment for prospecting novel PHA-producing organisms, since traits advantageous to lower production costs, such as tolerance for high salinities and low temperatures, are common. We show that two sea-ice bacteria, Halomonas sp. 363 and Paracoccus sp. 392, are able to produce various types of PHA from inexpensive carbon sources. Halomonas sp. 363 is an especially interesting PHA-producing organism, since it has three different synthesis pathways to produce both short- and medium-chain-length PHAs.

Imaging and modelling of poly(3-hydroxybutyrate) synthesis in Paracoccus denitrificans

Poly(3-hydroxybutyrate) (PHB) granule formation in Paracoccus denitrificans Pd1222 was investigated by laser scanning confocal microscopy (LSCM) and gas chromatography analysis. Cells that had been starved for 2 days were free of PHB granules but resynthesized them within 30 min of growth in fresh medium with succinate. In most cases, the granules were distributed randomly, although in some cases they appeared in a more organized pattern. The rates of growth and PHB accumulation were analyzed within the frame of a Genome-Scale Metabolic Model (GSMM) containing 781 metabolic genes, 1403 reactions and 1503 metabolites. The model was used to obtain quantitative predictions of biomass yields and PHB synthesis during aerobic growth on succinate as sole carbon and energy sources. The results revealed an initial fast stage of PHB accumulation, during which all of the acetyl-CoA originating from succinate was diverted to PHB production. The next stage was characterized by a tenfold lower PHB production rate and the simultaneous onset of exponential growth, during which acetyl-CoA was predominantly drained into the TCA cycle. Previous research has shown that PHB accumulation correlates with cytosolic acetyl-CoA concentration. It has also been shown that PHB accumulation is not transcriptionally regulated. Our results are consistent with the mentioned findings and suggest that, in absence of cell growth, most of the cellular acetyl-CoA is channeled to PHB synthesis, while during exponential growth, it is drained to the TCA cycle, causing a reduction of the cytosolic acetyl-CoA pool and a concomitant decrease of the synthesis of acetoacetyl-CoA (the precursor of PHB synthesis).

Economic and environmental assessment of bacterial poly(3-hydroxybutyrate) production from the organic fraction of municipal solid waste

The management of municipal solid waste is a major logistic and environmental problem worldwide. Nonetheless, the organic fraction of municipal solid waste (OFMSW) is a valuable source of nutrients which can be used for a variety of purposes, according to the Circular Economy paradigm. Among the possible applications, the bioproduction of a biodegradable polyester, poly(3-hydroxybutyrate) [P(3HB)], using OFMSW as carbon platform is a promising strategy. Here, an economic and environmental assessment of bacterial P(3HB) production from OFMSW is presented based on previously published results. The SuperPro Designer® software was used to simulate P(3HB) production under our experimental parameters. Two scenarios were proposed depending on the fermentation medium: (1) enzymatic hydrolysate of OFMSW supplemented with glucose and plum waste juice; and (2) basal medium supplemented with glucose and plum waste juice. According to our results, both scenarios are not economically feasible under our experimental parameters. In Scenario 1, the low fermentation yield, the cost of the enzymes, the labour cost and the energy consumption are the factors that most contribute to that result. In Scenario 2, the cost of the extraction solvent and the low fermentation yield are the most limiting factors. The possibility of using process waste as raw material for the generation of other products must be investigated to enhance economic feasibility. From an environmental viewpoint, the photochemical oxidation potential (derived from the use of anisole as extraction solvent) and the generation of acid rain and global warming effect (caused by the burning of fuels for power generation) are the most relevant impacts associated to P(3HB) production under our experimental parameters.

Metabolic circuits and gene regulators in polyhydroxyalkanoate producing organisms: Intervention strategies for enhanced production

Worldwide worries upsurge concerning environmental pollutions triggered by the accumulation of plastic wastes. Biopolymers are promising candidates for resolving these difficulties by replacing non-biodegradable plastics. Among biopolymers, polyhydroxyalkanoates (PHAs), are natural polymers that are synthesized and accumulated in a range of microorganisms, are considered as promising biopolymers since they have biocompatibility, biodegradability, and other physico-chemical properties comparable to those of synthetic plastics. Consequently, considerable research have been attempted to advance a better understanding of mechanisms related to the metabolic synthesis and characteristics of PHAs and to develop native and recombinant microorganisms that can proficiently produce PHAs comprising desired monomers with high titer and productivity for industrial applications. Recent developments in metabolic engineering and synthetic biology applied to enhance PHA synthesis include, promoter engineering, ribosome-binding site (RBS) engineering, development of synthetic constructs etc. This review gives a brief overview of metabolic routes and regulators of PHA production and its intervention strategies.

The Modification of Regulatory Circuits Involved in the Control of Polyhydroxyalkanoates Metabolism to Improve Their Production

Poly-(3-hydroxyalkanoates) (PHAs) are bacterial carbon and energy storage compounds. These polymers are synthesized under conditions of nutritional imbalance, where a nutrient is growth-limiting while there is still enough carbon source in the medium. On the other side, the accumulated polymer is mobilized under conditions of nutrient accessibility or by limitation of the carbon source. Thus, it is well known that the accumulation of PHAs is affected by the availability of nutritional resources and this knowledge has been used to establish culture conditions favoring high productivities. In addition to this effect of the metabolic status on PHAs accumulation, several genetic regulatory networks have been shown to drive PHAs metabolism, so the expression of the PHAs genes is under the influence of global or specific regulators. These regulators are thought to coordinate PHAs synthesis and mobilization with the rest of bacterial physiology. While the metabolic and biochemical knowledge related to the biosynthesis of these polymers has led to the development of processes in bioreactors for high-level production and also to the establishment of strategies for metabolic engineering for the synthesis of modified biopolymers, the use of knowledge related to the regulatory circuits controlling PHAs metabolism for strain improvement is scarce. A better understanding of the genetic control systems involved could serve as the foundation for new strategies for strain modification in order to increase PHAs production or to adjust the chemical structure of these biopolymers. In this review, the regulatory systems involved in the control of PHAs metabolism are examined, with emphasis on those acting at the level of expression of the enzymes involved and their potential modification for strain improvement, both for higher titers, or manipulation of polymer properties. The case of the PHAs producer Azotobacter vinelandii is taken as an example of the complexity and variety of systems controlling the accumulation of these interesting polymers in response to diverse situations, many of which could be engineered to improve PHAs production.

Polyhydroxyalkanoates (PHA) production from fermented thermal-hydrolyzed sludge by PHA-storing denitrifiers integrating PHA accumulation with nitrate removal

Polyhydroxyalkanoates (PHA) production from fermented thermal-hydrolyzed sludge was conducted by mixed microbial cultures (MMCs) in the study. An MMC enriched in the species Brachymonas_denitrificans (60.18%) was selected under an aerobic feast/famine regime, which is capable of denitrification and accumulating PHA. To take advantage of the PHA-storing denitrifiers, an aerobic-feast/anoxic-famine regime was applied to integrate culture selection with denitrification. The results showed that cultures enriched under the regime exhibited a PHA storage capacity with PHA yield on VFA of 0.47 gCOD/gCOD and well denitrification performance achieving nitrate removal of 98%. Moreover, the aerobic-feast/anoxic-famine regime could originate a comparable maximum PHA content to the complete aerobic feast/famine regime (49.7 wt% versus. 47.1 wt%, respectively), yet reduce aeration energy input by 79% in the culture selection process. Finally, this study investigated the accumulation of nitrite and nitrous oxide during PHA based denitrification and the feasibility of integrating the process with wastewater treatment.

Designing and Engineering Methylorubrum extorquens AM1 for Itaconic Acid Production

Methylorubrum extorquens (formerly Methylobacterium extorquens) AM1 is a methylotrophic bacterium with a versatile lifestyle. Various carbon sources including acetate, succinate and methanol are utilized by M. extorquens AM1 with the latter being a promising inexpensive substrate for use in the biotechnology industry. Itaconic acid (ITA) is a high-value building block widely used in various industries. Given that no wildtype methylotrophic bacteria are able to utilize methanol to produce ITA, we tested the potential of M. extorquens AM1 as an engineered host for this purpose. In this study, we successfully engineered M. extorquens AM1 to express a heterologous codon-optimized gene encoding cis-aconitic acid decarboxylase. The engineered strain produced ITA using acetate, succinate and methanol as the carbon feedstock. The highest ITA titer in batch culture with methanol as the carbon source was 31.6 ± 5.5 mg/L, while the titer and productivity were 5.4 ± 0.2 mg/L and 0.056 ± 0.002 mg/L/h, respectively, in a scaled-up fed-batch bioreactor under 60% dissolved oxygen saturation. We attempted to enhance the carbon flux toward ITA production by impeding poly-β-hydroxybutyrate accumulation, which is used as carbon and energy storage, via mutation of the regulator gene phaR. Unexpectedly, ITA production by the phaR mutant strain was not higher even though poly-β-hydroxybutyrate concentration was lower. Genome-wide transcriptomic analysis revealed that phaR mutation in the ITA-producing strain led to complex rewiring of gene transcription, which might result in a reduced carbon flux toward ITA production. Besides poly-β-hydroxybutyrate metabolism, we found evidence that PhaR might regulate the transcription of many other genes including those encoding other regulatory proteins, methanol dehydrogenases, formate dehydrogenases, malate:quinone oxidoreductase, and those synthesizing pyrroloquinoline quinone and thiamine co-factors. Overall, M. extorquens AM1 was successfully engineered to produce ITA using acetate, succinate and methanol as feedstock, further supporting this bacterium as a feasible host for use in the biotechnology industry. This study showed that PhaR could have a broader regulatory role than previously anticipated, and increased our knowledge of this regulator and its influence on the physiology of M. extorquens AM1.