Differences in Pulmonary Artery Flow Hemodynamics Between PAH and PH-HFpEF: Insights From 4D-Flow CMR

Pulmonary artery (PA) flow analysis is crucial for understanding the progression of pulmonary hypertension (PH). We hypothesized that PA flow characteristics vary according to PH etiology. In this study, we used 4D flow cardiovascular magnetic resonance imaging (CMR) to compare PA flow velocity and wall shear stress (WSS) between patients with pulmonary arterial hypertension (PAH) and those with heart failure with preserved ejection fraction and pulmonary hypertension (PH-HFpEF). We enrolled 13 PAH and 15 PH-HFpEF patients. All participants underwent echocardiography, 4D flow CMR, and right heart catheterization. We compared right ventricular outflow tract (RVOT) flow and main pulmonary artery (MPA) hemodynamics, including peak velocity and mean and maximum WSS, between groups. PH-HFpEF patients were older and more likely to have hypertension. PAH patients had higher mean PA pressure (47.8 ± 8.8 vs. 32.9 ± 6.9 mmHg, p < 0.001) and pulmonary vascular resistance (PVR) (8.6 ± 4.6 vs. 2.6 ± 2.2 wood unit, p < 0.001). RVOT systolic notching was more common in PAH patients (8 of 13 vs. 0 of 15), and they had shorter RVOT acceleration time (85.5 ± 20.9 vs. 135.0 ± 21.7 ms, p < 0.001). PAH patients had lower MPA Vmax (0.8 ± 0.2 vs. 1.1 ± 0.4 m/s, p = 0.032), mean WSS (0.29 ± 0.09 vs. 0.36 ± 0.06 Pa, p = 0.035), and maximal WSS (0.99 ± 0.18 vs. 1.21 ± 0.19 Pa, p = 0.011). Anterior MPA analysis confirmed lower WSS in PAH patients. PVR was negatively correlated with MPA mean WSS (r = -0.630, p = 0.002). PAH patients had lower MPA Vmax and lower mean MPA WSS in 4D flow CMR compared to PH-HFpEF patients. These distinct PA flow characteristics suggest that the flow hemodynamics of the PA remodeling process differ depending on the underlying etiology of PH.

Computational Study on the Effects of Valve Orientation on the Hemodynamics and Leaflet Dynamics of Bioprosthetic Pulmonary Valves

Pulmonary valves do not display a fibrous annulus as do other valves in the heart; thus, pulmonary valves can be implanted at multiple orientations and locations within the right ventricular outflow tract (RVOT). This gives surgeons more freedom when implanting the valve but it also results in uncertainties regarding placement, particularly with respect to valve orientation. We investigate the pulmonary artery hemodynamics and valve leaflet dynamics of pulmonary valve replacements (PVRs) with various orientations via fluid-structure interaction (FSI) models. A canonical model of the branching pulmonary artery is coupled with a dynamic model of a pulmonary valve, and from this we quantify the effect of valve implant orientation on the postvalvular hemodynamics and leaflet dynamics. Metrics such as turbulent kinetic energy (TKE), branch pulmonary artery flow distributions, projected valve opening area (PVOA), and pressure differentials across the valve leaflets are analyzed. Our results indicate that off-axis orientation results in higher pressure forces and flow and energy asymmetry, which potentially have implications for long-term durability of implanted bioprosthetic valves.

Hemodynamic evaluation of biomaterial-based surgery for Tetralogy of Fallot using a biorobotic heart, in silico, and ovine models

Tetralogy of Fallot is a congenital heart disease affecting newborns and involves stenosis of the right ventricular outflow tract (RVOT). Surgical correction often widens the RVOT with a transannular enlargement patch, but this causes issues including pulmonary valve insufficiency and progressive right ventricle failure. A monocusp valve can prevent pulmonary regurgitation; however, valve failure resulting from factors including leaflet design, morphology, and immune response can occur, ultimately resulting in pulmonary insufficiency. A multimodal platform to quantitatively evaluate the effect of shape, size, and material on clinical outcomes could optimize monocusp design. This study introduces a benchtop soft biorobotic heart model, a computational fluid model of the RVOT, and a monocusp valve made from an entirely biological cell-assembled extracellular matrix (CAM) to tackle the multifaceted issue of monocusp failure. The hydrodynamic and mechanical performance of RVOT repair strategies was assessed in biorobotic and computational platforms. The monocusp valve design was validated in vivo in ovine models through echocardiography, cardiac magnetic resonance, and catheterization. These models supported assessment of surgical feasibility, handling, suturability, and hemodynamic and mechanical monocusp capabilities. The CAM-based monocusp offered a competent pulmonary valve with regurgitation of 4.6 ± 0.9% and a transvalvular pressure gradient of 4.3 ± 1.4 millimeters of mercury after 7 days of implantation in sheep. The biorobotic heart model, in silico analysis, and in vivo RVOT modeling allowed iteration in monocusp design not now feasible in a clinical environment and will support future surgical testing of biomaterials for complex congenital heart malformations.

Non-Newtonian Effects of Blood Flow on Hemodynamics in Pulmonary Stenosis: Numerical Simulation

This paper aims to explore the construction of an individualized pulmonary artery stenosis model based on computed tomography (CT) images. The stenosis model is simulated using a porous medium, and the numerical simulation is carried out by computational fluid dynamics (CFD) method to discuss non-Newtonian effects on hemodynamics. The hemodynamic parameters and quantitative pulmonary pressure ratio (QPPR) of the right pulmonary artery stenosis are obtained. The change curves of hemodynamic parameters show that the effects of non-Newtonian fluid are more significant than those of Newtonian fluid. Under the non-Newtonian condition, pressure and velocity drop more and faster when blood flow enters into the stenosis region. There is a high wall shear stress in the stenosis downstream. The margin of error between the QPPR value of the non-Newtonian fluid simulation and the clinical measurement value is not more than 10%. This work provides the evidence that the simulation of non-Newtonian fluid is closer to the reality when a porous medium model is used in a stenosis model. This contributes to assessing the severity of pulmonary stenosis behavior and is essential to guide disease treatment.

Numerical simulation of hemodynamics in patient-specific pulmonary artery stenosis

BACKGROUND

The incidence rate of pulmonary artery stenosis is increasing year by year and its numerical simulation has become a key project of biomedical engineering.

OBJECTIVE

The purpose of this work is to study the changes of hemodynamic parameters in patient-specific pulmonary artery stenosis.

METHODS

A pulmonary artery stenosis model is established based on patient-specific computed tomography (CT) images. According to the actual anatomy of patient-specific pulmonary artery stenosis, the stenosis area is simulated using a porous medium to study its hemodynamic changes. The computational fluid dynamics (CFD) method is used to simulate the hemodynamic changes of pulmonary artery stenosis, and to explore the mechanical characteristics between blood flow and vessel wall.

RESULTS

The results suggest that the blood pressures of arterial branches increase and the pressure drop at both ends of the stenosis is higher. There is a high flow rate and wall shear stress at the stenosis.

CONCLUSION

This study shows that the hemodynamic model of pulmonary artery stenosis can be accurately reconstructed by achieving numerical simulation of the local stenosis through CT images, and this work has important implications for improving the confidence of clinical diagnosis and treatment of pulmonary artery diseases.

An In Vitro Circulatory Loop Model of the Pediatric Right Ventricular Outflow Tract as a Platform for Valve Evaluation

PURPOSE

Tetralogy of Fallot and other conditions affecting the right ventricular outflow tract (RVOT) are common in pediatric patients, but there is a lack of quantitative comparison among techniques for repairing or replacing the pulmonary valve. The aim of this study was to develop a robust in vitro system for quantifying flow conditions after various RVOT interventions.

METHODS

An infant-sized mock circulatory loop that includes a 3D-printed RVOT anatomical model was developed to evaluate flow conditions after different simulated surgical repairs. Physiologically correct flow and pressure were achieved with custom compliant tubing and a tunable flow restrictor. Pressure gradient, flow regurgitation, and coaptation height were measured for two monocusp leaflet designs after tuning the system with a 12 mm Hancock valved conduit.

RESULTS

Measurements were repeatable across multiple samples of two different monocusp designs, with the wider leaflet in the 50% backwall model consistently exhibiting lower pressure gradient but higher regurgitation compared to the leaflet in the 40% backwall model. Coaptation height was measured via direct visualization with endoscopic cameras, revealing a shorter area of contact for the wider leaflet (3.3-4.0 mm) compared to the narrower one (4.3 mm).

CONCLUSION

The 3D-printed RVOT anatomical model and in vitro pulmonary circulatory loop developed in this work provide a platform for planning and evaluating surgical interventions in the pediatric population. Measurements of regurgitation, pressure gradient, and coaptation provide a quantitative basis for comparison among different valve designs and positions.

Numerical analysis of hemodynamics in pulmonary artery stenosis

BACKGROUND: Pulmonary artery stenosis is a serious threat to people’s life and health. OBJECTIVE: The hydrodynamic mechanism of pulmonary artery stenosis is investigated. METHODS: Numerical analysis of hemodynamics in pulmonary artery stenosis using computational fluid dynamics techniques is a well-established method. An idealized model of pulmonary stenosis is established, and the model is divided into main pulmonary artery, right and left pulmonary arteries, and their branches. The sections at different positions are intercepted to study the distribution trend of maximum velocity, pressure and wall shear stress. RESULTS: The numerical simulation results show that the pressure drop at both ends of the narrow is large. High velocity and wall shear stress exist in the center of stenosis, and the wall shear stress at the distal end of stenosis gradually decreases, resulting in endothelial dysfunction. CONCLUSIONS:  To some extent, this study helps clinicians make diagnosis and treatment plans in advance and improve prognosis. This method could be used in the numerical simulation of practical models.

The Effect of Geometric and Hemodynamic Parameters on Blood Flow Efficiency in Repaired Tetralogy of Fallot Patients

Surgical repair of Tetralogy of Fallot (TOF) involves a series of steps to remove right ventricular outflow tract and pulmonary artery obstruction. However, the large degree of anatomic variability among preoperative TOF patients may impact the effectiveness of different repair strategies and, subsequently, different geometric modifications for different patients. This study investigates the relationships between geometric and hemodynamic parameters and mechanical energy efficiency for a patient-specific dataset of 16 postoperative TOF repairs, using morphometric and statistical shape analyses, as well as computational fluid dynamics simulations with physiologically-relevant inlet and outlet boundary conditions. Quantitatively, negative correlations were found between the right and left pulmonary artery centerline tract cumulative torsion and energy efficiency (r = - 0.65, p = 0.01, for both). A positive correlation was also found for a statistical shape mode associated with skewing of the geometric sub-regions (r = 0.61, p = 0.01). Qualitatively, medium- and low-efficiency geometries exhibit disturbed flow and much more proximal vortex formation as compared to a high-efficiency geometry. Thus, it is recommended, as much as possible, to both relieve and avoid the introduction of torsion into the patient's anatomy during surgical repair of TOF.

Computational Analysis of the Pulmonary Arteries in Congenital Heart Disease: A Review of the Methods and Results

With the help of computational fluid dynamics (CFD), hemodynamics of the pulmonary arteries (PA's) can be studied in detail and varying physiological circumstances and treatment options can be simulated. This offers the opportunity to improve the diagnostics and treatment of PA stenosis in biventricular congenital heart disease (CHD). The aim of this review was to evaluate the methods of computational studies for PA's in biventricular CHD and the level of validation of the numerical outcomes. A total of 34 original research papers were selected. The literature showed a great variety in the used methods for (re) construction of the geometry as well as definition of the boundary conditions and numerical setup. There were 10 different methods identified to define inlet boundary conditions and 17 for outlet boundary conditions. A total of nine papers verified their CFD outcomes by comparing results to clinical data or by an experimental mock loop. The diversity in used methods and the low level of validation of the outcomes result in uncertainties regarding the reliability of numerical studies. This limits the current clinical utility of CFD for the study of PA flow in CHD. Standardization and validation of the methods are therefore recommended.

Early changes of pulmonary arterial hemodynamics in patients with systemic sclerosis: flow pattern, WSS, and OSI analysis with 4D flow MRI

OBJECTIVES

To study the pulmonary artery (PA) hemodynamics in patients with systemic sclerosis (SSc) using 4D flow MRI (4D-flow).

METHODS

Twenty-three patients with SSc (M/F: 2/21, 57 ± 15 years, 3 manifest PA hypertension (PAH) by right heart catheterization) and 10 control subjects (M/F: 1/9, 55 ± 17 years) underwent 4D-flow for the in vivo measurement of 3D blood flow velocities in the PA. Data analysis included area-averaged flow quantification at the main PA, 3D wall shear stress (WSS), oscillatory shear index (OSI) calculation along the PA surface, and Reynolds number. The composite outcome of all-cause death and major adverse cardiac events was also investigated.

RESULTS

The maximum PA flow at the systole did not differ, but the minimum flow at the diastole was significantly greater in patients with SSc compared with that in control subjects (7.7 ± 16.0 ml/s vs. ‑ 13.0 ± 17.3 ml/s, p < 0.01). The maximum WSS at the peak systole was significantly lower and OSI was significantly greater in patients with SSc compared with those in control subjects (maximum WSS: 1.04 ± 0.20 Pa vs. 1.33 ± 0.34 Pa, p < 0.01, OSI: 0.139 ± 0.031 vs. 0.101 ± 0.037, p < 0.01). The cumulative event-free rate for the composite event was significantly lower in patients with minimum flow in main PA ≤ 9.22 ml/s (p = 0.012) and in patients with Reynolds number ≤ 2560 (p < 0.001).

CONCLUSIONS

4D-flow has the potential to detect changes of PA hemodynamics noninvasively and predict the outcome in patients with SSc at the stage before manifest PAH.

KEY POINTS

• The WSS at the peak systolic phase was significantly lower (p < 0.05), whereas OSI was greater (p < 0.01) in patients with SSc without manifest PAH than in controls. • The hemodynamic change detected by 4D-flow may help patient management even at the stage before manifest PAH in SSc. • The minimum PA flow and Reynolds number by 4D-flow will serve as a predictive marker for SSc.

Personalized Interventions: A Reality in the Next 20 Years or Pie in the Sky

There is no better representation of the need for personalization of care than the breadth and complexity of congenital heart disease. Advanced imaging modalities are now standard of care in the field, and the advancements being made to three-dimensional visualization technologies are growing as a means of pre-procedural preparation. Incorporating emerging modeling approaches, such as computational fluid dynamics, will push the limits of our ability to predict outcomes, and this information may be both obtained and utilized during a single procedure in the future. Artificial intelligence and customized devices may soon surface as realistic tools for the care of patients with congenital heart disease, as they are showing growing evidence of feasibility within other fields. This review illustrates the great strides that have been made and the persistent challenges that exist within the field of congenital interventional cardiology, a field which must continue to innovate and push the limits to achieve personalization of the interventions it provides.

Computational Fluid Dynamics of Vascular Disease in Animal Models

Recent applications of computational fluid dynamics (CFD) applied to the cardiovascular system have demonstrated its power in investigating the impact of hemodynamics on disease initiation, progression, and treatment outcomes. Flow metrics such as pressure distributions, wall shear stresses (WSS), and blood velocity profiles can be quantified to provide insight into observed pathologies, assist with surgical planning, or even predict disease progression. While numerous studies have performed simulations on clinical human patient data, it often lacks prediagnosis information and can be subject to large intersubject variability, limiting the generalizability of findings. Thus, animal models are often used to identify and manipulate specific factors contributing to vascular disease because they provide a more controlled environment. In this review, we explore the use of CFD in animal models in recent studies to investigate the initiating mechanisms, progression, and intervention effects of various vascular diseases. The first section provides a brief overview of the CFD theory and tools that are commonly used to study blood flow. The following sections are separated by anatomical region, with the abdominal, thoracic, and cerebral areas specifically highlighted. We discuss the associated benefits and obstacles to performing CFD modeling in each location. Finally, we highlight animal CFD studies focusing on common surgical treatments, including arteriovenous fistulas (AVF) and pulmonary artery grafts. The studies included in this review demonstrate the value of combining CFD with animal imaging and should encourage further research to optimize and expand upon these techniques for the study of vascular disease.

What range of extra-cardiac conduit flow velocity is detectable intraoperatively following the completion of a total cavo-pulmonary connection?

Background

Very few studies have investigated the blood flow velocity from the inferior vena cava (IVC) to the pulmonary artery following the Fontan operation using an extra-cardiac conduit (ECC). No studies at all have investigated the velocity immediately after the circulation is established. The purpose of this retrospective study was to find an acceptable flow velocity at the ECC following the completion of a total cavo-pulmonary connection (TCPC) via transesophageal echocardiography.

Findings

We measured the mean velocity (m-V) of the blood flow proximal to the anastomosis between the IVC and ECC in eight patients and compared the results with theoretically predicted values based on assumptions regarding the cardiac output, the ratio of the IVC flow to the superior vena cava flow, and the cross-sectional form of the ECC. Mean velocities ranging from about 15 to 60 cm/s were detected in the absence of any observable stenosis. The measured m-V was significantly faster than the predicted value in our study, both collectively and in every patient individually. The shrinking and compression of the ECC might account for the faster velocities measured in our cases.

Conclusion

The observed range of m-V at the ECC, about 15-60cm/s, may be acceptable for the establishment of TCPC circulation.

Fluid dynamics simulation of right ventricular outflow tract oversizing

OBJECTIVES

Repair of the right ventricular outflow tract (RVOT) in paediatric cardiac surgery remains challenging due to the high reoperation rate. Intimal hyperplasia and consequent arteriosclerosis is one of the most important limitation factors for graft durability. Since local shear stress and pressure are predictive elements for intimal hyperplasia and wall degeneration, we sought to determine in an oversized 12-mm RVOT model, with computed fluid dynamics simulation, the local haemodynamical factors that may explain intimal hyperplasia. This was done with the aim of identifying the optimal degree of oversizing for a 12-mm native RVOT.

METHODS

Twenty domestic pigs, with a weight of 24.6 ± 0.89 kg and a native RVOT diameter of 12 ± 1.7 mm, had valve conduits of 12, 16, 18 and 20 mm implanted. Pressure and flow were measured at 75, 100 and 125% of normal flow at RVOT at the pulmonary artery, pulmonary artery bifurcation and at the left and right pulmonary arteries. Three-dimensional computed fluid dynamics (CFD) simulation in all four geometries in all flow modalities was performed. Local shear stress and pressure conditions were investigated.

RESULTS

Corresponding to 75, 100 and 125% of steady-state flow, three inlet velocity profiles were obtained, 0.2, 0.29 and 0.36 m/s, respectively. At inflow velocity profiles, low shear stress areas, ranged from 0 to 2 Pa, combined with high-pressure areas ranging from 11.5 to 12.1 mmHg that were found at distal anastomosis, at bifurcation and at the ostia of the left and right pulmonary arteries in all geometries.

CONCLUSIONS

In all three oversized geometries, the local reparation of shear stress and pressure in the 16-mm model showed a similar local profile as in the native 12 mm RVOT. According to these findings, we suggest oversizing the natural 12-mm RVOT by not more than 4 mm. The elements responsible for wall degeneration and intimal hyperplasia remain very similar to the conditions present in native RVOT.