Assessment of the Systems Approach for the Phytosanitary Treatment of Wood Infested With Wood-Boring Insects

Testing the heat treatment dose for Agrilus planipennis (Coleoptera: Buprestidae) prepupae using the Humble water bath

The lethal heat treatment dose (time and temperature) for the prepupal life stage of Agrilus planipennis Fairmaire (Coleoptera: Buprestidae), emerald ash borer (EAB), was determined through an in vitro application using a carefully calibrated heat treatment apparatus. The lethal and sublethal effects of heat on A. planipennis prepupae were assessed through a ramped heat delivery application, simulating industrial kilns and conventional heat chamber operations, for treatments combining target temperatures of 54 °C, 55 °C, and 56 °C, and exposure durations of 0 min (i.e., kiln temperature ramp only), 15 min, or 30 min. Prepupal EAB larvae did not survive exposure to 56 °C for 15 min or longer, or to 55 °C for 30 min. Sublethal effects were observed for all other treatments. Sublethal effects included delayed development and failure to complete the pupal and adult life stages.

Mortality of Bark- and Wood-boring Beetles (Coleoptera: Buprestidae, Cerambycidae, and Curculionidae) in Naturally Infested Heat-treated Ash, Birch, Oak, and Pine Bolts

Firewood and wood packaging material (WPM) are major pathways for moving bark- and wood-infesting insects (borers). Heat treatment regulations for interstate firewood movement vary among U.S. states: from 56°C for 30 min to 71.1°C for 75 min. Current WPM international standards (ISPM 15) require heating to a minimum of 56°C for 30 min throughout the profile of the wood. Using bolts from infested ash (Fraxinus), birch (Betula), oak (Quercus), and pine (Pinus) trees in Michigan, we assessed borer mortality at core temperatures of 50, 53, 56, and 60°C maintained for 30 min in chambers set to 60, 65, 70, or 75°C. After treatment, bolts were monitored for adult emergence and later dissected to determine borer mortality rates. Mortality was high to complete for all heat treatments and increased with both increasing core and chamber temperatures. For the Agrilus (Buprestidae) species tested, there was complete mortality of Agrilus anxius on birch and Agrilus planipennis on ash when core temperatures of 56°C or higher were targeted regardless of chamber temperature. However, on oak, a few Agrilus bilineatus and Agrilus sulcicollis survived in bolts heated to 56°C in chambers at 60 and 65°C, and some A. sulcicollis survived in chambers set at 70 and 75°C. Similarly, a few pine-infesting borers survived heating to 56°C at all chamber temperatures. However, there was complete mortality in all hosts when bolts were heated to 60°C for 30 min, regardless of chamber temperature. Results are discussed in terms of current treatment regulations for firewood and WPM.

Tomodensitometry as a Tool to Detect and Study Two Agrilus (Coleoptera: Buprestidae) Species

Exotic insect species are an increasing concern with international trade. Detecting and removing any insect are thus important for any imported/exported product, including wood products. For example, wood transportation is known to be an important pathway for the introduction and dispersal of the Emerald Ash Borer, Agrilus planipennis (Coleoptera: Buprestidae). This Asian species is causing high mortality of ash trees in its introduced range because of the weak natural defense of trees and the virtual absence of natural enemies. For similar reasons, there are concerns in Europe that the Bronze Birch Borer, A. anxius, native to North America, could be introduced and cause important birch mortality. Having efficient detection methods and phytosanitary measures to prevent introducing it is thus important. In this study, we evaluated tomodensitometry—or CT-scan—as a detection method for detecting these two Agrilus spp. using debarking as the method of reference. Using CT-scan, we were also able to precisely measure the depth of insects in ash and birch trees in order to recommend proper phytosanitary measures for exportation and importation of wood products. Both techniques efficiently detect the presence of insects in ash, paper birch, and yellow birch. However, the number of A. anxius detected depended on both the technique and the diameter of the sample. The depth of insects depended on tree species, sample diameter, and life-stage. Globally, A. planipennis are deeper in ash trees than A. anxius in birch trees, and prepupae are deeper than larvae. The maximal depth in the sapwood (excluding bark thickness) for ash, paper birch, and yellow birch was 21.9 mm, 6.30 mm, and 3.22 mm, respectively. While CT-scan is more expensive and requires access to expensive equipment, debarking is more time-consuming, especially if the number of insects needs to be determined.