Increased species-assignment of filamentous fungi using MALDI-TOF MS coupled with a simplified sample processing and an in-house library

Mass Spectrometry Analysis for Clinical Applications: A Review

Mass spectrometry (MS) has become an attractive analytical method in clinical analysis due to its comprehensive advantages of high sensitivity, high specificity and high throughput. Separation techniques coupled MS detection (e.g., LC-MS/MS) have shown unique advantages over immunoassay and have developed as golden criterion for many clinical applications. This review summarizes the characteristics and applications of MS, and emphasizes the high efficiency of MS in clinical research. In addition, this review also put forward further prospects for the future of mass spectrometry technology, including the introduction of miniature MS instruments, point-of-care detection and high-throughput analysis, to achieve better development of MS technology in various fields of clinical application. Moreover, as ambient ionization mass spectrometry (AIMS) requires little or no sample pretreatment and improves the flux of MS, this review also summarizes its potential applications in clinic.

Fatal panresistant Lomentospora prolificans fungemia in a patient with aplastic anemia: First report from Türkiye

Lomentospora prolificans is an opportunistic pathogen that can cause invasive lomentosporiosis in immunocompromised patients. Patients with hematological malignancies and those who have undergone stem cell or solid organ transplantations are in the highest risk group. In addition to the limitations and delays in diagnostic possibilities, L. prolificans has a high mortality due to its resistance to all available antifungal drugs. In a patient diagnosed with aplastic anemia, we described the first case of L. prolificans in Türkiye. L. prolificans was identified in the blood culture, and despite the initiation of antifungal treatments, the fungemia resulted in mortality on the 7th day of intensive care hospitalization. This case highlights the importance of early recognition and prompt initiation of appropriate antifungal therapy to improve the outcome of patients with rare mold infections.

Validation of an expanded, in-house library and an optimized preparation method for the identification of fungal isolates using MALDI-TOF mass spectrometry

The goal of this study was to validate an optimized sample preparation method for filamentous fungal isolates coupled with the use of an in-house library for the identification of moulds using Matrix Assisted Laser Desorption/Ionization-Time of Flight Mass Spectrometry (MALDI-TOF MS) in a multicenter context. For that purpose, three Spanish microbiology laboratories participated in the identification of 97 fungal isolates using MALDI-TOF MS coupled with the Filamentous Fungi library 3.0 (Bruker Daltonics) and an in-house library containing 314 unique fungal references. The isolates analyzed belonged to 25 species from the genus Aspergillus, Fusarium, Scedosporium/Lomentospora, the Mucorales order and the Dermatophytes group. MALDI-TOF MS identification was carried out from hyphae resuspended in water and ethanol. After a high-speed centrifugation step, the supernatant was discarded and the pellet submitted to a standard protein extraction step. The protein extract was analyzed with the MBT Smart MALDI Biotyper system (Bruker Daltonics). The rate of accurate, species-level identification obtained ranged between 84.5% and 94.8% and the score values were 1.8 for 72.2-94.9% of the cases. Two laboratories failed to identify only one isolate of Syncephalastrum sp. and Trichophyton rubrum, respectively and three isolates could not be identified in the third center (F. proliferatum, n = 1; T.interdigitale, n = 2). In conclusion, the availability of an effective sample preparation method and an extended database allowed high rates of correct identification of fungal species using MALDI-TOF MS. Some species, such as Trichophyton spp. are still difficult to identify. Although further improvements are still required, the developed methodology allowed the reliable identification of most fungal species.

Lomentospora prolificans Disseminated Infections: A Systematic Review of Reported Cases

BACKGROUND

Lomentospora prolificans, a rare, highly virulent filamentous fungus with high rates of intrinsic resistance to antifungals, has been associated with different types of infections in immunocompromised as well as immunocompetent individuals.

OBJECTIVE

To systematically address all relevant evidence regarding L. prolificans disseminated infections in the literature.

METHODS

We searched Medline via PubMed and Scopus databases through July 2022. We performed a qualitative synthesis of published articles reporting disseminated infections from L. prolificans in humans.

RESULTS

A total of 87 studies describing 142 cases were included in our systematic review. The pathogen was most frequently reported in disseminated infections in Spain (n = 47), Australia (n = 33), the USA (n = 21), and Germany (n = 10). Among 142 reported cases, 48.5% were males. Underlying conditions identified for the majority of patients included malignancy (72.5%), hemopoietic stem cell transplantation (23.2%), solid organ transplantation (16%), and AIDS (2%). Lungs, central nervous system, skin, eyes, heart and bones/joints were the most commonly affected organs. Neutropenia was recorded in 52% of patients. The mortality rate was as high as 87.3%.

CONCLUSIONS

To the best of our knowledge, this is the first systematic review conducted on disseminated infections due to this rare microorganism. Physicians should be aware that L. prolificans can cause a diversity of infections with high mortality and primarily affects immunocompromised and neutropenic patients.

How MALDI-TOF Mass Spectrometry Technology Contributes to Microbial Infection Control in Healthcare Settings

Healthcare settings have been utilizing matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) since 2010. MALDI-TOF MS has various benefits over the conventional method of biochemical identification, including ease of use, speed, accuracy, and low cost. This approach can solve many of the obstacles to identifying bacteria, fungi and viruses. As technology advanced, more and more databases kept track of spectra, allowing species with similar morphological, genotypic, and biochemical traits to be identified. Using MALDI-TOF MS for identification has become more accurate and quicker due to advances in sample preparation and database enrichment. Rapid sample detection and colony identification using MALDI-TOF MS have produced promising results. A key application of MALDI-TOF MS is quickly identifying highly virulent and drug-resistant diseases. Here, we present a review of the scientific literature assessing the effectiveness of MALDI-TOF MS for locating clinically relevant pathogenic bacteria, fungi, and viruses. MALDI-TOF MS is a useful strategy for locating clinical pathogens, however, it also has some drawbacks. A small number of spectra in the database and inherent similarities among organisms can make it difficult to distinguish between different species, which can result in misidentifications. The majority of the time additional testing may correct these problems, which happen very seldom. In conclusion, infectious illness diagnosis and clinical care are being revolutionized by the use of MALDI-TOF MS in the clinical microbiology laboratory.

Identification and Typing of Strains of Wood-Rotting Basidiomycetes by Protein Profiling Using MALDI-TOF MS

The accurate identification and proper typing of basidiomycetes are required in medical, sanitary maintenance, agriculture, and biotechnology fields. A diagnostic method based on information from whole-cell proteins acquired by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) was investigated to identify wood-rotting fungi, a group of filamentous fungi. In this study, mass spectra of intracellular peptides obtained from cultured mycelia of 50 strains of 10 wood-rotting fungal species were obtained multiple times and mass spectral patterns (MSPs) consisting of peaks that characterized the fungal species or strain was created to construct an in-house database. The species identification was conducted by comparing the newly obtained raw mass spectra with the MSPs in the database using the MALDI Biotyper. The results showed that the peak patterns of the mass spectra were reproducible and matched at the strain level. A cluster analysis based on the MSPs was also conducted to examine inter-and intraspecific diversity among the tested wood-rotting basidiomycetes. Most of the fungal strains examined in this study could be identified to a species level; however, the strains belonging to Pleurotus could only be identified to a genus level. This was due to an intraspecific variation, so the identification accuracy could be amendable with a more enhanced database.

Lomentospora prolificans: An Emerging Opportunistic Fungal Pathogen

Lomentospora prolificans is an emerging opportunistic pathogen that primarily affects immunocompromised individuals leading to disseminated disease with high mortality rates while also causing infections in healthy populations. Successful recovery from infection is difficult due to high rates of intrinsic resistance to antifungals. Rapid and readily available diagnostic methods, aggressive surgical debridement wherever appropriate, and effective and timely antifungal treatment are the pillars for successful management. Future research will need to clarify the environmental niche of the fungus, further investigate the pathophysiology of infection and define species-specific therapeutic targets.

Identification of Filamentous Fungi by MALDI-TOF Mass Spectrometry: Evaluation of Three Different Sample Preparation Methods and Validation of an In-House Species Cutoff

Invasive infections caused by filamentous fungi constitute a leading cause of morbidity and mortality in immunocompromised patients. Rapid and reliable identification of filamentous fungi is essential for the early initiation of appropriate treatment. In the present study, 230 filamentous fungi isolates identified by conventional methods were investigated using MALDI-TOF MS (Bruker Daltonics, Bremen, Germany) in combination with the Filamentous Fungi Library 3.0 provided by the manufacturer. Three different sample preparation methods were applied as recommended by the manufacturer and identification rates were compared using the criteria provided by the manufacturer. Application of the more time-consuming sample preparation methods clearly improved identification at the species level. Thus, the identification rate increased from 48.9% using the simplest method to 76.1% with the most laborious procedure. Misidentifications did not occur. Furthermore, the reliability of an in-house threshold for species identification was investigated. The reduced threshold increased the rate of isolates correctly identified at the species level by up to 86.4%. As no misidentification was made at the genus level and only one misidentification of minor significance occurred at the species level, this threshold could be validated for routine use in our laboratory. In conclusion, regarding the high identification rates achieved, this commercial platform proved suitable for implementation in routine diagnosis.

Performance of Matrix-Assisted Laser Desorption Ionization-Time of Flight Mass Spectrometry for Identification of Scedosporium, Acremonium-Like, Scopulariopsis, and Microascus Species

Matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) has emerged as a powerful microorganism identification tool. Research on MALDI-TOF MS identification of rare filamentous fungi is still lacking. This study aimed to evaluate the performance of MALDI-TOF MS in the identification of Scedosporium, Acremonium-like, Scopulariopsis, and Microascus species. Sabouraud broth cultivation and formic acid/acetonitrile protein extraction were used for MALDI-TOF MS identification by a Bruker Biotyper system. An in-house database containing 29 isolates of Scedosporium, Acremonium-like, Scopulariopsis, and Microascus spp. was constructed. A total of 52 clinical isolates were identified using the Bruker Filamentous Fungi Library v1.0 (FFL v1.0) alone, and Filamentous Fungi Library v1.0 plus the in-house library, respectively. The mass spectrum profile (MSP) dendrograms of the 28 Scedosporium isolates, 26 Acremonium-like isolates, and 27 Scopulariopsis and Microascus isolates were constructed by MALDI Biotyper OC 4.0 software, respectively. The correct species identification rate significantly improved when using the combined databases compared with that when using FFL v1.0 alone (Scedosporium spp., 75% versus 0%; Acremonium-like spp., 100% versus 0%; Scopulariopsis and Microascus spp., 100% versus 62.5%). The MSP dendrograms differentiated Acremonium-like species, Scopulariopsis and Microascus species clearly, but cannot distinguish species in the Scedosporium apiospermum complex. In conclusion, with an expanded database, MALDI-TOF MS is an effective tool for the identification of Scedosporium, Acremonium-like, Scopulariopsis, and Microascus species.

Evaluation of Formic Acid Sandwich (FA-sandwich), A Pretreatment method for Filamentous Fungi, for the Identification of Clinically Relevant Filamentous Fungi by Two MALDI-TOF MS systems

Matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) has been successfully applied to identify microorganisms. However, unlike bacteria and yeast where identification results can be obtained rapidly and accurately by using a simple direct-coating pretreatment method, the traditional pretreatment methods for filamentous fungi are more complex, involving ethanol, formic acid, acetonitrile, and a protein extraction process by centrifugation, i.e., the EtOH-FA full extraction. This cumbersome pretreatment for filamentous fungi is a major reason for the lack of widespread use of MALDI-TOF MS for the identification of filamentous fungi in clinical settings. The present study describes an alternative method, the FA-sandwich, and demonstrates that the approach is efficient and effective. 148 clinical filamentous fungal isolates collected from three large general hospitals in Hubei Province, China, were processed by the FA-sandwich method and identified by two MALDI-TOF MS platforms, Autof ms and Vitek MS. The FA-sandwich allowed a 93.9% species-level identification with Autof ms, and 97.3% species-level identification rates were found for Vitek MS when the IVD, the RUO and in-house databases are used in combination. Further comparison of the ease of FA-sandwich with the EtOH-FA full extraction showed that the FA-sandwich is a more convenient, time- and reagent-saving, and sensitive pretreatment method. These findings indicate that the FA-sandwich method is suitable for pretreating filamentous fungi followed by MALDI-TOF MS identification in clinical microbiology laboratories.

A New Filter Based Cultivation Approach for Improving Aspergillus Identification using Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry (MALDI-TOF MS)

Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry (MALDI-TOF MS) is widely used in clinical laboratories for routine identification of bacteria and yeasts. However, methodological difficulties are still apparent when applied to filamentous fungi. The liquid cultivation method recommended by Bruker Daltonics GmbH for identification of filamentous fungi by MALDI-TOF MS is labour intensive and time-consuming. In this study, growth of Aspergillus species on different (porous) surfaces was investigated with the aim to develop a more reliable, quicker and less laborious identification method using MALDI-TOF MS. Mycelial growth without sporulation mimicking liquid cultivation and reliable MALDI-TOF MS spectra were obtained when A. fumigatus strains were grown on and in between a polycarbonate membrane filter on Sabouraud dextrose agar. A database of in-house reference spectra was created by growing Aspergillus reference strains (mainly focusing on sections Fumigati and Flavi) under these selected conditions. A test set of 50 molecularly identified strains grown under different conditions was used to select the best growth condition for identification and to perform an initial validation of the in-house database. Based on these results, the cultivation method on top of a polycarbonate filter proved to be most successful for species identification. This method was therefore selected for the identification of two sets of clinical isolates that mainly consisted of Aspergilli (100 strains originating from Indonesia, 70 isolates from Qatar). The results showed that this cultivation method is reliable for identification of clinically relevant Aspergillus species, with 67% and 76% correct identification of strains from Indonesia and Qatar, respectively. In conclusion, cultivation of Aspergilli on top of a polycarbonate filter showed improved results compared to the liquid cultivation protocol recommended by Bruker in terms of percentage of correct identification, ease of MSP creation, time consumption, cost and labour intensity. This method can be reliably applied for identification of clinically important Aspergilli and has potential for identification of other filamentous fungi.

Microbiological and Molecular Diagnosis of Mucormycosis: From Old to New

Members of the order Mucorales may cause severe invasive fungal infections (mucormycosis) in immune-compromised and otherwise ill patients. Diagnosis of Mucorales infections and discrimination from other filamentous fungi are crucial for correct management. Here, we present an overview of current state-of-the-art mucormycosis diagnoses, with a focus on recent developments in the molecular field. Classical diagnostic methods comprise histology/microscopy as well as culture and are still the gold standard. Newer molecular methods are evolving quickly and display great potential in early diagnosis, although standardization is still missing. Among them, quantitative PCR assays with or without melt curve analysis are most widely used to detect fungal DNA in clinical samples. Depending on the respective assay, sequencing of the resulting PCR product can be necessary for genus or even species identification. Further, DNA-based methods include microarrays and PCR-ESI-MS. However, general laboratory standards are still in development, meaning that molecular methods are currently limited to add-on analytics to culture and microscopy.

Developing Two Rapid Protein Extraction Methods Using Focused-Ultrasonication and Zirconia-Silica Beads for Filamentous Fungi Identification by MALDI-TOF MS

Filamentous fungi identification by Matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) has been challenging due to the lack of simple and rapid protein extraction methods and insufficient species coverage in the database. In this study, we created two rapid protein extraction methods for filamentous fungi: a one-step zirconia-silica beads method (ZSB) and a focused-ultrasonication method (FUS). The identification accuracy of two methods were evaluated with the VITEK MS, as well as number of spectra peaks and signal-to-noise ratio (S/N) with M-Discover 100 MALDI-TOF MS compared to the routine method. The better method was applied to build a filamentous fungi in-house spectra library for the M-Discover 100 MS, and then another one and routine method were performed in parallel to verify the accuracy and commonality of the in-house library. Using the two optimized methods, the dedicated operating time before MALDI-TOF MS analysis was reduced from 30 min to 7 (ZSB) or 5 (FUS) min per sample, with only a few seconds added for each additional strain. And both two methods identified isolates from most mold types equal to or better than the routine method, and the total correct identification rate using VITEK MS was 79.67, 76.42, and 76.42%, respectively. On the other hand, the two rapid methods generally achieved higher maximum and minimum S/N ratios with these isolates tested as compared to the routine method. Besides, the ZSB method produced overall mean of maximum and minimum S/N ratio higher than that by FUS. An in-house library of M-Discover MS was successfully built from 135 isolates from 42 species belonging to 18 genera using the ZSB method. Analysis of 467 isolates resulted in 97.22% correctly identified isolates to the species level by the ZSB method versus 95.50% by the routine method. The two novel methods are time- and cost-effective and allow efficient identification of filamentous fungi while providing a simplified procedure to build an in-house library. Thus, more clinical laboratories may consider adopting MALDI-TOF MS for filamentous fungi identification in the future.

Detection of azole resistance in Aspergillus fumigatus complex isolates using MALDI-TOF mass spectrometry

OBJECTIVES

The main goal of this study was to accurately detect azole resistance in species of the Aspergillus fumigatus complex by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS).

METHODS

Identification of isolates (n = 868) was done with MALDI-TOF MS using both commercial and in-house libraries. To determine azole susceptibility, the EUCAST E.Def. 9.3.2 method was applied as the reference standard. Identification of resistant isolates was confirmed by DNA sequence analysis. Protein spectra obtained by MALDI-TOF MS were analysed to differentiate species within the A. fumigatus complex and to detect azole-resistant A. fumigatus sensu stricto isolates.

RESULTS

Correct discrimination of A. fumigatus sensu stricto from cryptic species was accomplished in 100% of the cases applying principal component analysis (PCA) to protein spectra generated by MALDI-TOF MS. Furthermore, a specific peak (4586 m/z) was found to be present only in cryptic species. The application of partial least squares (PLS) discriminant analysis allowed 98.43% (±0.038) discrimination between susceptible and azole-resistant A. fumigatus sensu stricto isolates. Finally, based on PLS and SVM, A. fumigatus sensu stricto isolates with different cyp51A gene mutations were correctly clustered in 91.5% of the cases.

CONCLUSIONS

MALDI-TOF MS combined with peak analysis is a novel tool that allows the differentiation of A. fumigatus sensu stricto from other species within the A. fumigatus complex, as well as the detection of azole-resistant A. fumigatus sensu stricto. Although further studies are still needed, the results reported here show the great potential of MALDI-TOF and machine learning for the rapid detection of azole-resistant Aspergillus fumigatus isolates from clinical origins.

Recent developments in less known and multi-resistant fungal opportunists

Fungal infections have increased in recent years due to host factors, such as oncohaematological and transplant-related disorders, immunosuppressive therapy, and AIDS. Additionally, molecular and proteomic facilities have become available to identify previously unrecognizable opportunists. For these reasons, reports on less-known and recalcitrant mycoses, such as those caused by black fungi, hyaline filamentous fungi, coelomycetes, Mucorales, and non-Candida yeasts have emerged. In this review, novel taxonomy in these groups, which often are multi-resistant to one or several classes of antifungals, is discussed. Clinical presentations, diagnosis and current treatment of some major groups are summarised.

Matrix-Assisted Laser Desorption Ionization Time-of-Flight for Fungal Identification

Many studies have shown successful performance of matrix-assisted laser desorption ionization time-of-flight mass spectrometry for rapid yeast and mold identification, yet few laboratories have chosen to apply this technology into their routine clinical mycology workflow. This review provides an overview of the current status of matrix-assisted laser desorption ionization time-of-flight mass spectrometry for fungal identification, including key findings in the literature, processing and database considerations, updates in technology, and exciting future prospects. Significant advances toward standardization have taken place recently; thus, accurate species-level identification of yeasts and molds should be highly attainable, achievable, and practical in most clinical laboratories.

Scedosporium and Lomentospora Infections: Contemporary Microbiological Tools for the Diagnosis of Invasive Disease

Scedosporium/Lomentospora fungi are increasingly recognized pathogens. As these fungi are resistant to many antifungal agents, early diagnosis is essential for initiating targeted drug therapy. Here, we review the microbiological tools for the detection and diagnosis of invasive scedosporiosis and lomentosporiosis. Of over 10 species, Lomentospora prolificans, Scedosporium apiospermum, S. boydii and S. aurantiacum cause the majority of infections. Definitive diagnosis relies on one or more of visualization, isolation or detection of the fungus from clinical specimens by microscopy techniques, culture and molecular methods such as panfungal PCR or genus-/species-specific multiplex PCR. For isolation from respiratory tract specimens, selective media have shown improved isolation rates. Species identification is achieved by macroscopic and microscopic examination of colonies, but species should be confirmed by ITS with or without β-tubulin gene sequencing or other molecular methods. Matrix-assisted laser desorption ionization-time of flight mass spectrometry databases are improving but may need supplementation by in-house spectra for species identification. Reference broth microdilution methods is preferred for antifungal susceptibility testing. Next-generation sequencing technologies have good potential for characterization of these pathogens. Diagnosis of Scedosporium/Lomentospora infections relies on multiple approaches encompassing both phenotypic- and molecular-based methods.

An Overview of Genomics, Phylogenomics and Proteomics Approaches in Ascomycota

Fungi are among the most successful eukaryotes on Earth: they have evolved strategies to survive in the most diverse environments and stressful conditions and have been selected and exploited for multiple aims by humans. The characteristic features intrinsic of Fungi have required evolutionary changes and adaptations at deep molecular levels. Omics approaches, nowadays including genomics, metagenomics, phylogenomics, transcriptomics, metabolomics, and proteomics have enormously advanced the way to understand fungal diversity at diverse taxonomic levels, under changeable conditions and in still under-investigated environments. These approaches can be applied both on environmental communities and on individual organisms, either in nature or in axenic culture and have led the traditional morphology-based fungal systematic to increasingly implement molecular-based approaches. The advent of next-generation sequencing technologies was key to boost advances in fungal genomics and proteomics research. Much effort has also been directed towards the development of methodologies for optimal genomic DNA and protein extraction and separation. To date, the amount of proteomics investigations in Ascomycetes exceeds those carried out in any other fungal group. This is primarily due to the preponderance of their involvement in plant and animal diseases and multiple industrial applications, and therefore the need to understand the biological basis of the infectious process to develop mechanisms for biologic control, as well as to detect key proteins with roles in stress survival. Here we chose to present an overview as much comprehensive as possible of the major advances, mainly of the past decade, in the fields of genomics (including phylogenomics) and proteomics of Ascomycota, focusing particularly on those reporting on opportunistic pathogenic, extremophilic, polyextremotolerant and lichenized fungi. We also present a review of the mostly used genome sequencing technologies and methods for DNA sequence and protein analyses applied so far for fungi.

Implementation of MALDI-TOF Mass Spectrometry and Peak Analysis: Application to the Discrimination of Cryptococcus neoformans Species Complex and Their Interspecies Hybrids

Matrix-assisted laser desorption–ionization/time of flight mass spectrometry (MALDI-TOF MS) has been widely implemented for the rapid identification of microorganisms. Although most bacteria, yeasts and filamentous fungi can be accurately identified with this method, some closely related species still represent a challenge for MALDI-TOF MS. In this study, two MALDI-TOF-based approaches were applied for discrimination at the species-level of isolates belonging to the Cryptococcus neoformans complex, previously characterized by Amplified Fragment Length Polymorphism (AFLP) and sequencing of the ITS1-5.8S-ITS2 region: (i) an expanded database was built with 26 isolates from the main Cryptococcus species found in our setting (C. neoformans, C. deneoformans and AFLP3 interspecies hybrids) and (ii) peak analysis and data modeling were applied to the protein spectra of the analyzed Cryptococcus isolates. The implementation of the in-house database did not allow for the discrimination of the interspecies hybrids. However, the performance of peak analysis with the application of supervised classifiers (partial least squares-discriminant analysis and support vector machine) in a two-step analysis allowed for the 96.95% and 96.55% correct discrimination of C. neoformans from the interspecies hybrids, respectively. In addition, PCA analysis prior to support vector machine (SVM) provided 98.45% correct discrimination of the three analyzed species in a one-step analysis. This novel method is cost-efficient, rapid and user-friendly. The procedure can also be automatized for an optimized implementation in the laboratory routine.

Update on Matrix-Assisted Laser Desorption Ionization-Time of Flight Mass Spectrometry Identification of Filamentous Fungi

Matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS)-based species identification has found its place in many clinical routine diagnostic laboratories over the past years, allowing significantly reduced turnaround times and high-precision results. With regard to MALDI-TOF MS for filamentous fungi, here, we discuss different approaches for sample processing and growth conditions before analysis. In particular, we review the performances of different commercially available databases as well as the potential of complementary (self-constructed) in-house databases.

Multilaboratory Evaluation of the MALDI-TOF Mass Spectrometry System, MicroIDSys Elite, for the Identification of Medically Important Filamentous Fungi

With the increasing number of fungal infections and immunocompromised patients, rapid and accurate fungal identification is required in clinical microbiology laboratories. We evaluated the applicability of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) system, MicroIDSys Elite (ASTA Corp., South Korea) for the identification of medically important filamentous fungi. A total of 505 strains comprising 37 genera and 90 species collected from 11 Korean hospitals were sent to the microbiology laboratory of International St. Mary's Hospital. All isolates were tested using MicroIDSys Elite, and data were analyzed using the MoldDB v.1.22 database (ASTA). Correct identification rates were compared with the multigene sequencing results. MicroIDSys Elite correctly identified 86.5% (437/505) and 88.9% (449/505) of all tested isolates at the species and genus level, respectively. About 98.2% of Aspergillus isolates were identified at the species level, including cryptic and rare species of A. calidoustus, A. tamarii, A. lentulus, A. versicolor and A. aculeatus. MicroIDSys Elite identified 75.0% of basidiomycetes, including Schizophyllum commune, and 84.3% of the dermatophytes. It also distinguished Sprothrix globosa at the species level. The mean scores of total isolates corresponding to correct species identification were significantly higher than those obtained for genus-level identification (253.5 ± 50.7 vs. 168.6 ± 30.3, P < 0.001). MicroIDSys Elite showed high accuracy for the identification of filamentous fungi, including cryptic and rare Aspergillus species. It is suitable for use in clinical laboratories as a rapid and efficient tool for clinical mold identification. Further evaluations are recommended for MicroIDSys Elite as a rapid and efficient tool for the identification of medically important filamentous fungi.

A retrospective cohort of invasive fusariosis in the era of antimould prophylaxis

Mould-active prophylaxis is affecting the epidemiology of invasive mycoses in the form of a shift toward less common entities such as fusariosis. We analyze the characteristics of invasive fusariosis and its association to antifungal prophylaxis in a retrospective cohort (2004-2017) from a tertiary hospital in Madrid, Spain. Epidemiological, clinical, microbiological, and antifungal consumption data were retrieved. Isolates were identified to molecular level, and antifungal susceptibility was tested. Eight cases of invasive fusariosis were diagnosed. Three periods were identified according to incidence: <2008 (three cases), 2008-2013 (zero cases), >2014 (five cases). All except one case involved breakthrough fusariosis. During the earliest period, the episodes occurred while the patient was taking itraconazole (two) or fluconazole (one); more recently, while on micafungin (three) or posaconazole (one). Early cases involved acute leukemia at induction/consolidation, recent cases relapsed/refractory disease (P = .029). Main risk factor for fusariosis (62.5%) was prolonged neutropenia (median 44 days). Galactomannan and beta-D-glucan were positive in 37.5% and 100% of cases, respectively. All isolates except F. proliferatum presented high minimal inhibitory concentrations (MICs) against the azoles and lower MIC to amphotericin B. Most patients received combined therapy. Mortality at 42 days was 62.5%. Resolution of neutropenia was associated with survival (P = .048). Invasive fusariosis occurs as breakthrough infection in patients with hematologic malignancy, prolonged neutropenia, and positive fungal biomarkers. Recent cases were diagnosed in a period of predominant micafungin use in patients who had more advanced disease and protracted neutropenia and for whom mortality was extremely high. Resolution of neutropenia was a favorable prognostic factor.

Azole resistance survey on clinical Aspergillus fumigatus isolates in Spain

OBJECTIVES

We aimed to assess the percentage of azole resistance in Aspergillus fumigatus in Spain.

METHODS

Thirty participating Spanish hospitals stored all morphologically identified A. fumigatus sensu lato clinical isolates-regardless their clinical significance-from 15 February to 14 May 2019. Isolates showing azole resistance according to the EUCAST 9.3.2 methodology were molecularly identified and the cyp51A gene was studied in A. fumigatus sensu stricto isolates.

RESULTS

Eight hundred and forty-seven isolates from 725 patients were collected in 29 hospitals (A. fumigatus sensu stricto (n = 828) and cryptic species (n = 19)). Isolates were mostly from the lower respiratory tract (94.0%; 797/847). Only cryptic species were amphotericin B resistant. Sixty-three (7.4%) out of the 847 isolates were resistant to ≥1 azole(s). Azole resistance was higher in cryptic species than in A. fumigatus sensu stricto (95%, 18/19 vs. 5.5%, 45/828); isavuconazole was associated to the lowest number of non-wild type isolates. The dominant mechanism of resistance was the presence of TR₃₄-L98H substitutions (n = 24 out of 63). Out of the 725 patients, 48 (6.6%) carried either cryptic species (n = 14) or A. fumigatus sensu stricto (n = 34; 4.7%) resistant isolates. Aspergillus fumigatus sensu stricto harbouring either the TR₃₄-L98H (n = 19) or TR₄₆/Y121F/T289A (n = 1) mutations were detected in patients in hospitals located at 7/24 studied cities.

DISCUSSION

Of the patients, 6.6% carry azole-resistant A. fumigatus sensu lato isolates in Spain. TR₃₄-L98H is the dominant cyp51A gene substitutions, although its presence is not widespread.

Development and Validation of an In-House Library for Filamentous Fungi Identification by MALDI-TOF MS in a Clinical Laboratory in Medellin (Colombia)

Identification of filamentous fungi by conventional phenotypic methods are time-consuming, and a correct identification at the species level is prone to errors. Therefore, a more accurate and faster time-to-results, and cost-effective technique, is required, such as the Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometry (MALDI-TOF MS). In this study, we describe the development of an in-house spectra library for the identification of filamentous fungi frequently isolated from patients with infections. An in-house spectra library was constructed using 14 reference strains grown in solid medium. Clinical isolates were identified either by the in-house spectra library or the Biotyper commercial library from Bruker Daltonics. Fungal identification was carried following the Biotyper’s established scores: ≤1.699: not reliably identified (NRI); 1.700–1.999: genus-level; ≥2.000: species-level. Clinical isolates were identified, with the in-house library, at species- and genus-level at 88.70% (55) and 3.22% (2), respectively. While 4.80% (3) was NRI and 3.22% (2) was discrepant concerning sequencing. On the contrary, identification up to species and genus-level with the commercial library was 44.44% (16) and 22.22% (8), respectively. NRI and the discrepancy was 30.55% (11) and 2.77% (1), respectively. For the reaming 26 isolates, 16 from Neoscytalidium dimidiatum and 10 from Sporothrix spp., respectively, the absence of spectrum and the specific spectra within the Sporothrix complex in the commercial library resulted in the inability to obtain an identification. In conclusion, the current results advocate the importance that each clinical microbiological laboratory needs to develop an ad hoc library associated with the MALDI-TOF MS fungal identification to overcome the limitations of the available commercial libraries.

Evaluation of the new Id-Fungi plates from Conidia for MALDI-TOF MS identification of filamentous fungi and comparison with conventional methods as identification tool for dermatophytes from nails, hair and skin samples

OBJECTIVES

We first compare the efficiency of mould/dermatophyte identification by MALDI-TOF MS using a new medium called Id-Fungi plates (IDFP) from Conidia^® and two different databases. For the second purpose, we evaluated a new version of the medium supplemented with cycloheximide, Id-Fungi plates Plus (IDFPC) for the direct inoculation of nails, hair and skin samples and compared the efficiency of MALDI-TOF MS identification of dermatophytes to classical methods based on culture and microscopy.

METHODS

A total of 71 strains have been cultured IDFP and Sabouraud gentamicin plates (SGC2) and were identified by MALDI-TOF MS. For the evaluation of the combination IDFPC/ MALDI-TOF MS as a method of identification for dermatophytes, 428 samples of hair nails and skin were cultivated in parallel on IDFPC and Sabouraud + cycloheximide medium (SAB-ACTI).

RESULTS

For Aspergillus sp and non-Aspergillus moulds, the best performances were obtained on IDFP after maximum 48-h growth, following protein extraction. For dermatophytes, the best condition was using the IDFP at 72 hours, after extended direct deposit. Regarding the direct inoculation of nails, hair skin on IDFPC, 129/428 (30.1%) showed a positive culture against 150/428 (35%) on SAB-ACTI medium. Among the 129 positive strains, the identification by MALDI-TOF MS was correct for 92/129 (71.4%).

CONCLUSION

The IDFP allows the generation of better spectra by MALDI-TOF MS compared to SGC2. It facilitates sampling and deposit. Regarding the use of IDFPC, this medium seems less sensitive than SAB-ACTI but among positive strains, the rate of correct identification by MALDI-TOF MS is satisfactory.

Evaluation of ID Fungi Plates Medium for Identification of Molds by MALDI Biotyper

MALDI-TOF mass spectrometry (MS) identification of pathogenic filamentous fungi is often impaired by difficulties in harvesting hyphae embedded in the medium and long extraction protocols. The ID Fungi Plate (IDFP) is a novel culture method developed to address such difficulties and improve the identification of filamentous fungi by MALDI-TOF MS. We cultured 64 strains and 11 clinical samples on IDFP, Sabouraud agar-chloramphenicol (SAB), and ChromID Candida agar (CAN2). We then compared the three media for growth, ease of harvest, amount of material picked, and MALDI-TOF identification scores after either rapid direct transfer (DT) or a long ethanol-acetonitrile (EA) extraction protocol. Antifungal susceptibility testing and microscopic morphology after subculture on SAB and IDFP were also compared for ten molds. Growth rates and morphological aspects were similar for the three media. With IDFP, harvesting of fungal material for the extraction procedure was rapid and easy in 92.4% of cases, whereas it was tedious on SAB or CAN2 in 65.2% and 80.3% of cases, respectively. The proportion of scores above 1.7 (defined as acceptable identification) were comparable for both extraction protocols using IDFP (P = 0.256). Moreover, rates of acceptable identification after DT performed on IDFP (93.9%) were significantly higher than those obtained after EA extraction with SAB (69.7%) or CAN2 (71.2%) (P = <0.001 and P = 0.001, respectively). Morphological aspects and antifungal susceptibility testing were similar between IDFP and SAB. IDFP is a culture plate that facilitates and improves the identification of filamentous fungi, allowing accurate routine identification of molds with MALDI-TOF-MS using a rapid-extraction protocol.

A Moldy Application of MALDI: MALDI-ToF Mass Spectrometry for Fungal Identification

As a result of its being inexpensive, easy to perform, fast and accurate, matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-ToF MS) is quickly becoming the standard means of bacterial identification from cultures in clinical microbiology laboratories. Its adoption for routine identification of yeasts and even dimorphic and filamentous fungi in cultures, while slower, is now being realized, with many of the same benefits as have been recognized on the bacterial side. In this review, the use of MALDI-ToF MS for identification of yeasts, and dimorphic and filamentous fungi grown in culture will be reviewed, with strengths and limitations addressed.