The chromosomal origin of replication (oriC) of Erwinia carotovora

Changing Perspectives on the Role of DnaA-ATP in Orisome Function and Timing Regulation

Bacteria, like all cells, must precisely duplicate their genomes before they divide. Regulation of this critical process focuses on forming a pre-replicative nucleoprotein complex, termed the orisome. Orisomes perform two essential mechanical tasks that configure the unique chromosomal replication origin, oriC to start a new round of chromosome replication: (1) unwinding origin DNA and (2) assisting with loading of the replicative DNA helicase on exposed single strands. In Escherichia coli, a necessary orisome component is the ATP-bound form of the bacterial initiator protein, DnaA. DnaA-ATP differs from DnaA-ADP in its ability to oligomerize into helical filaments, and in its ability to access a subset of low affinity recognition sites in the E. coli replication origin. The helical filaments have been proposed to play a role in both of the key mechanical tasks, but recent studies raise new questions about whether they are mandatory for orisome activity. It was recently shown that a version of E. coli oriC (oriC^allADP), whose multiple low affinity DnaA recognition sites bind DnaA-ATP and DnaA-ADP similarly, was fully occupied and unwound by DnaA-ADP in vitro, and in vivo suppressed the lethality of DnaA mutants defective in ATP binding and ATP-specific oligomerization. However, despite their functional equivalency, orisomes assembled on oriC^allADP were unable to trigger chromosome replication at the correct cell cycle time and displayed a hyper-initiation phenotype. Here we present a new perspective on DnaA-ATP, and suggest that in E. coli, DnaA-ATP is not required for mechanical functions, but rather is needed for site recognition and occupation, so that initiation timing is coupled to DnaA-ATP levels. We also discuss how other bacterial types may utilize DnaA-ATP and DnaA-ADP, and whether the high diversity of replication origins in the bacterial world reflects different regulatory strategies for how DnaA-ATP is used to control orisome assembly.

oriC-encoded instructions for the initiation of bacterial chromosome replication

Replication of the bacterial chromosome initiates at a single origin of replication that is called oriC. This occurs via the concerted action of numerous proteins, including DnaA, which acts as an initiator. The origin sequences vary across species, but all bacterial oriCs contain the information necessary to guide assembly of the DnaA protein complex at oriC, triggering the unwinding of DNA and the beginning of replication. The requisite information is encoded in the unique arrangement of specific sequences called DnaA boxes, which form a framework for DnaA binding and assembly. Other crucial sequences of bacterial origin include DNA unwinding element (DUE, which designates the site at which oriC melts under the influence of DnaA) and binding sites for additional proteins that positively or negatively regulate the initiation process. In this review, we summarize our current knowledge and understanding of the information encoded in bacterial origins of chromosomal replication, particularly in the context of replication initiation and its regulation. We show that oriC encoded instructions allow not only for initiation but also for precise regulation of replication initiation and coordination of chromosomal replication with the cell cycle (also in response to environmental signals). We focus on Escherichia coli, and then expand our discussion to include several other microorganisms in which additional regulatory proteins have been recently shown to be involved in coordinating replication initiation to other cellular processes (e.g., Bacillus, Caulobacter, Helicobacter, Mycobacterium, and Streptomyces). We discuss diversity of bacterial oriC regions with the main focus on roles of individual DNA recognition sequences at oriC in binding the initiator and regulatory proteins as well as the overall impact of these proteins on the formation of initiation complex.

The Sinorhizobium meliloti chromosomal origin of replication

The predicted chromosomal origin of replication (oriC) from the alfalfa symbiontSinorhizobium melilotiis shown to allow autonomous replication of a normally non-replicating plasmid withinS. meliloticells. This is the first chromosomal replication origin to be experimentally localized in theRhizobiaceaeand its location, adjacent tohemE, is the same as fororiCinCaulobacter crescentus, the only experimentally characterized alphaproteobacterialoriC. Using an electrophoretic mobility shift assay and purifiedS. melilotiDnaA replication initiation protein, binding sites for DnaA were mapped in theS. meliloti oriCregion. Mutations in these sites eliminated autonomous replication.S. melilotithat expressed DnaA from a plasmidlacpromoter was observed to form pleomorphic filamentous cells, suggesting that cell division was perturbed. Interestingly, this cell phenotype is reminiscent of differentiated bacteroids found inside plant cells in alfalfa root nodules.

Host specificity of mollicutes oriC plasmids: functional analysis of replication origin

Recently, artificial oriC plasmids containing the chromosomal dnaA gene and surrounding DnaA box sequences were obtained for the mollicutes Spiroplasma citri and Mycoplasma pulmonis. In order to study the specificity of these plasmids among mollicutes, a set of similar oriC plasmids was developed for three mycoplasmas belonging to the mycoides cluster, Mycoplasma mycoides subsp. mycoides LC (MmmLC), M.mycoides subsp. mycoides SC (MmmSC) and Mycoplasma capricolum subsp. capricolum. Mycoplasmas from the mycoides cluster, S.citri and M.pulmonis were used as recipients for transformation experiments by homologous and heterologous oriC plasmids. All five mollicutes were successfully transformed by homologous plasmids, suggesting that the dnaA gene region represents the functional replication origin of the mollicute chromosomes. However, the ability of mollicutes to replicate heterologous oriC plasmids was found to vary noticeably with the species. For example, the oriC plasmid from M.capricolum did not replicate in the closely related species MmmSC and MmmLC. In contrast, plasmids harbouring the oriC from MmmSC, MmmLC and the more distant species S.citri were all found to replicate in M.capricolum. Our results suggest that the cis-elements present in oriC sequences are not the only determinants of this host specificity.

Cloning and characterization of an autonomous replication sequence from Coxiella burnetii

A Coxiella burnetii chromosomal fragment capable of functioning as an origin for the replication of a kanamycin resistance (Kanr) plasmid was isolated by use of origin search methods utilizing an Escherichia coli host. The 5.8-kb fragment was subcloned into phagemid vectors and was deleted progressively by an exonuclease III-S1 technique. Plasmids containing progressively shorter DNA fragments were then tested for their capability to support replication by transformation of an E. coli polA strain. A minimal autonomous replication sequence (ARS) was delimited to 403 bp. Sequencing of the entire 5.8-kb region revealed that the minimal ARS contained two consensus DnaA boxes, three A + T-rich 21-mers, a transcriptional promoter leading rightwards, and potential integration host factor and factor of inversion stimulation binding sites. Database comparisons of deduced amino acid sequences revealed that open reading frames located around the ARS were homologous to genes often, but not always, found near bacterial chromosomal origins; these included identities with rpmH and rnpA in E. coli and identities with the 9K protein and 60K membrane protein in E. coli and Pseudomonas species. These and direct hybridization data suggested that the ARS was chromosomal and not associated with the resident plasmid QpH1. Two-dimensional agarose gel electrophoresis did not reveal the presence of initiating intermediates, indicating that the ARS did not initiate chromosome replication during laboratory growth of C. burnetii.

Methylated cytosine at Dcm (CCATGG) sites in Escherichia coli: possible function and evolutionary implications

The frequency and distribution of methylated cytosine (5-MeC) at CCATGG (Dcm sites) in 49 E. coli DNA loci (207,530 bp) were determined. Principal observations of this analysis were: (1) Dcm frequency was higher than expected from random occurrence but lower than calculated with Markov chain analysis; (2) CCTGG sites were found more frequently in coding than in noncoding regions, while the opposite was true for CCAGG sites; (3) Dcm site distribution does not exhibit any identifiably regular pattern on the chromosome; (4) Dcm sites at oriC are probably not important for accurate initiation of DNA replication; (5) 5-MeC in codons was more frequently found in first than in second and third positions; (6) there are probably few genes in which the mutation rate is determined mainly by DNA methylation. It is proposed that the function of Dcm methylase is to protect chromosomal DNA from restriction-enzyme EcoRII. The Dcm methylation contribution to determine frequency of oligonucleotides, mutation rate, and recombination level, and thus evolution of the E. coli genome, could be interpreted as a consequence of the acquisition of this methylation.

Pseudomonas syringae pv. phaseolicola genomic clones harboring heterologous DNA sequences suppress the same phaseolotoxin-deficient mutants

Cosmid cloning and mutagenesis were used to identify genes involved in the production of phaseolotoxin, the chlorosis-inducing phytotoxin of Pseudomonas syringae pv. phaseolicola, the causal agent of halo blight of bean (Phaseolus vulgaris L.). Eight stable clones were isolated from a genomic cosmid library by en masse mating to 10 ethyl methanesulfonate (EMS)-induced Tox- mutants. In cross-matings, each suppressed all 10 mutants as well as an additional 70 EMS-induced Tox- mutants (and one UV-induced Tox- mutant). On the basis of restriction endonuclease analysis and hybridization studies, the clones were grouped into three classes. Clones in a particular class shared common fragments, whereas clones in different classes did not. Clones from class I (but not classes II and III) also suppressed Tn5-induced Tox- mutants. Interposon mutagenesis and marker exchange of a representative clone from class III into the wild-type genome did not alter its Tox+ phenotype, indicating that this clone does not harbor structural or regulatory genes involved in phaseolotoxin production. We suggest that the genome of P. syringae pv. phaseolicola contains a "hot spot" in one of the functions involved in toxin production which is affected by EMS and UV and that heterologous clones are able to suppress the Tox- phenotype because their inserts encode products that are able to substitute for the product of the mutated gene. Alternatively, the inserts may contain sequences which titrate a repressor protein. In either case, the data suggest that suppression of EMS- and UV-induced mutants occurs when heterologous clones are present in multiple copies.

Repeated sequences including RS1100 from Pseudomonas cepacia AC1100 function as IS elements

Several lines of evidence were obtained that the previously identified, repeated sequence RS1100 of Pseudomonas cepacia strain AC1100 undergoes transposition events. DNA sequences flanking the chlorohydroxy hydroquinone (CHQ) degradative genes of this organism were examined from sources, including several independently isolated cosmid clones from an AC1100 genomic library and genomic DNAs of two independently maintained wild-type AC1100 isolates. Hybridization and restriction endonuclease mapping studies revealed these sequences to be similar except for their numbers and distributions of RS1100 copies. A recombinant plasmid containing the immediate chq gene region and excluding any copies of RS1100 was conjugated into AC1100 mutant RHA5 which was shown to have undergone a deletion of its corresponding DNA. Hybridization and restriction mapping analyses of several reisolated plasmids revealed the presence of RS1100 sequences at different positions within either the vector or insert portions. One such plasmid contained tandem copies of RS1100 with an intervening DNA sequence also of AC1100 origin. Similar experiments involving introduction of the promoter probe plasmid pKT240 into wild-type AC1100 cells resulted in the acquisition of high-concentration streptomycin resistance by a number of recipients. The reisolated plasmids in most cases also conferred streptomycin resistance to Escherichia coli transformants and in each case were found to contain insertions close to the upstream portion of the aphC structural gene. These insertions alternatively contained RS1100 sequences for a newly identified 3400 bp repeated sequence from AC1100. Based on these results, RS1100 has been redesignated as insertion sequence IS931 and the 3400 bp repeated sequence has been designated as IS932.

Cloning and characterization of hydrogen uptake genes from Rhizobium leguminosarum

A gene library of genomic DNA from the hydrogen uptake (Hup)-positive strain 128C53 of Rhizobium leguminosarum was constructed by using the broad-host-range mobilizable cosmid vector pLAFR1. The resulting recombinant cosmids contained insert DNA averaging 21 kilobase pairs (kb) in length. Two clones from the above gene library were identified by colony hybridization with DNA sequences from plasmid pHU1 containing hup genes of Bradyhizobium japonicum. The corresponding recombinant cosmids, pAL618 and pAL704, were isolated, and a region of about 28 kb containing the sequences homologous to B. japonicum hup-specific DNA was physically mapped. Further hybridization analysis with three fragments from pHU1 (5.9-kb HindIII, 2.9-kb EcoRI, and 5.0-kb EcoRI) showed that the overall arrangement of the R. leguminosarum hup-specific region closely parallels that of B. japonicum. The presence of functional hup genes within the isolated cosmid DNA was demonstrated by site-directed Tn5 mutagenesis of the 128C53 genome and analysis of the Hup phenotype of the Tn5 insertion strains in symbiosis with peas. Transposon Tn5 insertions at six different sites spanning 11 kb of pAL618 completely suppressed the hydrogenase activity of the pea bacteroids.

Sites of dnaA protein-binding in the replication origin of the Escherichia coli K-12 chromosome

On the basis of the observation that dnaA protein binds preferentially to DNA fragments carrying the Escherichia coli chromosomal replication origin (oriC), the binding sites were investigated by DNase I footprinting. As a result, three strong binding sites were identified in the minimal oriC sequence. The respective binding sites were 16 to 17 base-pairs long, and contained a common sequence (5') T-G-T-G-(G/T)-A-T-A-A-C (3') in the middle, although their polarities were not the same. Since mutants defective in function for autonomous replication have been isolated in the corresponding positions of the common sequence at each binding site, dnaA protein-binding at these sites seems to be significant for replication initiation.

Applicability of superhelical model for regulation of gene expression

The superhelical model for regulation of gene expression was tested in 41 structural genes of eukaryotes, viruses and plasmids, and in the primer RNA gene for DNA replication in five kinds of enteric bacteria and two kinds of plasmids. The model which was first proposed for regulation of transcription in simian virus 40 was based on the following observations: a stem-loop structure of low free energy was located 3' downstream from the transcriptional initiation site; sequences homologous to the loop were located at the symmetrical site with the stem-loop at the center; and the loop encountered any of these homologous sequences after one rotation of superhelix depending on the superhelical density. If the loop interacted with the complementary sequences in the opposite strand, DNA formed a specific cruciform or T-shaped structure. The superhelical model proposed that transcription was regulated by the conversion of the template DNA in the regular, the cruciform, and the T-shaped structures. The model was applicable to all the structural genes and the primer RNA genes tested so far, except histone genes. In eukaryotes, only one stem-loop structure which conformed to the superhelical model was constructed in most of the genes except the growth hormone genes, the globin genes of human, and the human interferon gamma gene. An average length of the stem-loop was 46 bases, and the 5' end of the stem loop was located at the 30th base downstream from the transcriptional initiation site on the average in eukaryotes. In some genes, a consensus sequence was detected in the loops of the same kind of gene in different species or of different kind of gene in the same species.

Sequence organization of replication origin of the Escherichia coli K-12 chromosome

A sequence of 245 base-pairs (oriC) in the replication origin of the Escherichia coli K-12 chromosome has been shown to provide all the information essential for initiation of bidirectional replication. In order to elucidate the sequence organization of oriC, numerous mutants carrying a single-to-multiple transitions from G X C to A X T base-pair were constructed by localized mutagenesis in vitro, which uses sodium bisulfite, and the correlation between the mutation sites and replicating ability (Ori function) was systematically analyzed. By isolating non-defective (Ori+) mutants with multiple base changes, transitions at 71 positions among 101 G X C pairs in oriC were found to have no effect on Ori function. Investigation of defective (Ori-) mutants, on the other hand, showed that individual replacements at 18 positions were detrimental to Ori function to some extent. These irreplaceable G X C pairs fell in the positions where no substitution was detected in the Ori+ mutants. The defect of the Ori- mutants with a single base substitution was generally weaker than that of the previously constructed Ori- mutants lacking a part of oriC. The addition of two or more base changes each giving a faint Ori- phenotype, however, resulted in a more intensive Ori- phenotype. We have previously demonstrated that oriC contains several regions where deletion or insertion of oligonucleotides leads to strong Ori- phenotypes. Transitions in those areas did not cause any defect of Ori function. Combining present results on base substitution mutants with the previous observations together, we assumed that the oriC sequence provides multiple interaction sites with replication initiation factors, and the precise arrangement of these sites are required for Ori function.

Cloning of genes involved in the biosynthesis of pseudobactin, a high-affinity iron transport agent of a plant growth-promoting Pseudomonas strain

A gene bank of DNA from plant growth-promoting Pseudomonas sp. strain B10 was constructed using the broad host-range conjugative cosmid pLAFR1. The recombinant cosmids contained insert DNA averaging 21.5 kilobase pairs in length. Nonfluorescent mutants of Pseudomonas sp. strain B10 were obtained by mutagenesis with N-methyl-N'-nitro-N-nitrosoguanidine, ethyl methanesulfonate, or UV light and were defective in the biosynthesis of its yellow-green, fluorescent siderophore (microbial iron transport agent) pseudobactin. No yellow-green, fluorescent mutants defective in the production of pseudobactin were identified. Nonfluorescent mutants were individually complemented by mating the gene bank en masse and identifying fluorescent transconjugants. Eight recombinant cosmids were sufficient to complement 154 nonfluorescent mutants. The pattern of complementation suggests that a minimum of 12 genes arranged in four gene clusters is required for the biosynthesis of pseudobactin. This minimum number of genes seems reasonable considering the structural complexity of pseudobactin.

Isolation and characterization of plasmids carrying a partially defective Escherichia coli replication origin

The replication origin (oriC) of the Escherichia coli chromosome has been cloned and the region essential for chromosomal replication has been delimited to 245 base pairs. In previous studies the ability of recombinants between oriC and ColE1-type vectors, to transform E. coli polA- strains was used to determine which nucleotides in oriC are essential for replication. In this paper we have used a different approach by isolating partial defective replication mutants of a minichromosome (pCM959) that contains oriC as the single replication origin. Our results demonstrate that many mutations are allowed within oriC that do not affect oriC function as measured by the ability to transform E. coli polA- strains. In the minimal oriC region we detected 8 mutations at positions that are conserved in the sequence of six bacterial origins. The implications of these results on previous work will be discussed. Our data also demonstrate that a mutation producing an oriC- phenotype may be suppressed by secondary mutations. An E. coli strain was found that facilitates the isolation of partially defective minichromosomes. The results with this strain indicate a specific function of the sequence surrounding the base pair at position 138.

Chromosomal replication origin from the marine bacterium Vibrio harveyi functions in Escherichia coli: oriC consensus sequence

The chromosomal replication origin (oriC) of Vibrio harveyi has been isolated on a plasmid and shown to function as an origin in Escherichia coli. The nucleotide sequence of the V. harveyi oriC was determined. From a comparison of this sequence with oriC sequences of five enteric bacteria, we derived a consensus sequence of bacterial origins that function in E. coli. This consensus sequence identifies 122 positions within oriC where nucleotide substitutions can occur without loss of origin function. These positions are clustered rather than scattered. Four interrelated nine-base-pair repeats and eight of the dam methylation G-A-T-C sites are conserved in the consensus sequence. Very few relative insertion-deletion changes occur, and these are localized to one region of oriC. The genes for three polypeptides linked to the V. harveyi oriC were identified by using in vitro protein synthesis directed by deletion derivative plasmid templates. One of these genes, coding for a 58,000 Mr polypeptide and located 3.0 kilobase pairs from the V. harveyi oriC region, is lethal to E. coli when many copies (approximately 40 per cell) are present (high copy lethal or HCL gene). In addition, nucleotide sequence analysis showed that a different gene, the gid gene to the left of oriC, is highly conserved between E. coli and V. harveyi, whereas the coding region to the right of oriC is much less conserved.

Chromosomal replication origins (oriC) of Enterobacter aerogenes and Klebsiella pneumoniae are functional in Escherichia coli

The chromosomal DNA replication origins (oriC) from two members of the family Enterobacteriaceae, Enterobacter aerogenes and Klebsiella pneumoniae, have been isolated as functional replication origins in Escherichia coli. The origins in the SalI restriction fragments of 17.5 and 10.2 kilobase pairs, cloned from E. aerogenes and K. pneumoniae, respectively, were found to be between the asnA and uncB genes, as are the origins of the E. coli and Salmonella typhimurium chromosomes. Plasmids containing oriC from E aerogenes, K. pneumoniae, and S. typhimurium replicate in the E. coli cell-free enzyme system (Fuller, et al., Proc. Natl. Acad. Sci. U.S.A. 78:7370--7374, 1981), and this replication is dependent on dnaA protein activity. These SalI fragments from E. aerogenes and K. pneumoniae carry a region which is lethal to E. coli when many copies are present. We show that this region is also carried on the E. coli 9.0-kilobase-pair EcoRI restriction fragment containing oriC. The F0 genes of the atp or unc operon, when linked to the unc operon promoter, are apparently responsible for the lethality.