Simultaneous loading of 200 sample lanes for DNA sequencing on vertical and horizontal, standard and ultrathin gels

History and principles of conductive media for standard DNA electrophoresis

DNA electrophoresis has been a dominant technique in molecular biology for 30 years. The foundation for this common technique is based on a few simple electrochemical principles. Electrophoretic DNA separation borrowed from existing protein and RNA techniques developed in the 1950s and 1960s. For 30 years, common DNA electrophoretic conductive media remained largely unchanged, with Tris as the primary cation. DNA electrophoresis relies simply upon the negative charge of the phosphate backbone and the ability to distribute a voltage gradient in a sieving matrix. Nevertheless, the conductive properties in DNA electrophoresis are complicated by choices involving voltage, electric current, conductivity, temperature, and the concentration and identity of the ionic species present. Differences among the extant chemical recipes for common conductive media affect central properties. Tris-based buffers, even in optimal form, create a runaway positive feedback loop between heat generation and retention, temperature, conductivity, and current. This is undesirable, leading to limitations on the permissible electric field and to impaired resolution. Recently, we developed low-molarity conductive media to mitigate this positive feedback loop. Such media allow for application of a higher electric field. Applications of DNA electrophoresis can now be reengineered for lower ionic strength, higher field strengths, and lower requirements for heat dissipation.

Diversity of vertebrate splicing factor U2AF35: identification of alternatively spliced U2AF1 mRNAS

U2 small nuclear ribonucleoprotein auxiliary factor small subunit (U2AF(35)) is encoded by a conserved gene designated U2AF1. Here we provide evidence for the existence of alternative vertebrate transcripts encoding different U2AF(35) isoforms. Three mRNA isoforms (termed U2AF(35)a-c) were produced by alternative splicing of the human U2AF1 gene. U2AF(35)c contains a premature stop codon that targets the resulting mRNA to nonsense-mediated mRNA decay. U2AF(35)b differs from the previously described U2AF(35)a isoform in 7 amino acids located at the atypical RNA Recognition Motif involved in dimerization with U2AF(65). Biochemical experiments indicate that isoform U2AF(35)b, which has been highly conserved from fish to man, maintains the ability to interact with U2AF(65), stimulates U2AF(65) binding to a pre-mRNA, and promotes U2AF splicing activity in vitro. Real time, quantitative PCR analysis indicates that U2AF(35)a is the most abundant isoform expressed in murine tissues, although the ratio between U2AF(35)a and U2AF(35)b varies from 10-fold in the brain to 20-fold in skeletal muscle. We propose that post-transcriptional regulation of U2AF1 gene expression may provide a mechanism by which the relative cellular concentration and availability of U2AF(35) protein isoforms are modulated, thus contributing to the finely tuned control of splicing events in different tissues.

New DNA sequencing methods

The Human Genome Project and other major genomic sequencing projects have pushed the development of sequencing technology. In the past six years alone, instrument throughput has increased 15-fold. New technologies are now on the horizon that could yield massive increases in our capacity for de novo DNA sequencing. This review presents a summary of state-of-the-art technologies for genomic sequencing and describes technologies that may be candidates for the next generation of DNA sequencing instruments.

The genomic response of the Drosophila embryo to JNK signaling

During Drosophila development, the Jun N-terminal kinase signal transduction pathway regulates morphogenetic tissue closure movements that involve cell shape changes and reorganization of the actin cytoskeleton. We analyzed the genome-wide transcriptional response to activation of the JNK pathway in the Drosophila embryo by serial analysis of gene expression (SAGE) and identified loci encoding cell adhesion molecules and cytoskeletal regulators as JNK responsive genes. The role of one of the upregulated genes, chickadee (chic), encoding a Drosophila profilin, in embryogenesis was analyzed genetically. chic-deficient embryos fail to execute the JNK-mediated cytoskeletal rearrangements during dorsal closure. This study demonstrates a transcriptional mechanism of cytoskeletal regulation and establishes SAGE as an advantageous approach for genomic experiments in the fruitfly.

From first base: the sequence of the tip of the X chromosome of Drosophila melanogaster, a comparison of two sequencing strategies

We present the sequence of a contiguous 2.63 Mb of DNA extending from the tip of the X chromosome of Drosophila melanogaster. Within this sequence, we predict 277 protein coding genes, of which 94 had been sequenced already in the course of studying the biology of their gene products, and examples of 12 different transposable elements. We show that an interval between bands 3A2 and 3C2, believed in the 1970s to show a correlation between the number of bands on the polytene chromosomes and the 20 genes identified by conventional genetics, is predicted to contain 45 genes from its DNA sequence. We have determined the insertion sites of P-elements from 111 mutant lines, about half of which are in a position likely to affect the expression of novel predicted genes, thus representing a resource for subsequent functional genomic analysis. We compare the European Drosophila Genome Project sequence with the corresponding part of the independently assembled and annotated Joint Sequence determined through "shotgun" sequencing. Discounting differences in the distribution of known transposable elements between the strains sequenced in the two projects, we detected three major sequence differences, two of which are probably explained by errors in assembly; the origin of the third major difference is unclear. In addition there are eight sequence gaps within the Joint Sequence. At least six of these eight gaps are likely to be sites of transposable elements; the other two are complex. Of the 275 genes in common to both projects, 60% are identical within 1% of their predicted amino-acid sequence and 31% show minor differences such as in choice of translation initiation or termination codons; the remaining 9% show major differences in interpretation.

Ultrathin-layer gel electrophoresis of biopolymers

Emerging need for large-scale, high-resolution analysis of biopolymers, such as DNA sequencing polymerase chain reaction, (PCR) product sizing, single nucleotide polymorphism (SNP) hunting and analysis of protein molecules necessitated the development of automated and high-throughput gel electrophoresis based methods enabling rapid, high-performance separations in a wide molecular weight range. Scaling down electric field mediated separation processes supports higher throughput due to the applicability of higher voltages, thus speeding up analysis time. Indeed, efforts in miniaturization resulted in faster, easier, less costly and more convenient analyses, fulfilling the needs of the emerging biotechnology industry for microscale and massively parallel assays. The two primary approaches in miniaturizing electrophoresis dimensions are the capillary and microslab formats. This latter one evolved towards ultrathin-layer gel electrophoresis which is, except from the thickness of the separation platform, slightly in the upper side of the scale, resulting in considerably easier handling. Ultrathin-layer gel electrophoresis combines the advantages of conventional slab-gel electrophoresis (multilane format) and capillary gel electrophoresis (rapid, high-efficiency separations). It is readily automated, automatic versions of it have been extensively used for large-scale DNA sequencing in the Human Genome Project and more recently became popular in high throughput DNA fragment analysis. Ultrathin-layer techniques are the first step towards the wider use of electrophoresis microchips in perfecting a user-friendly interface between the user and the microdevice.

A member of a gene family on Xp22.3, VCX-A, is deleted in patients with X-linked nonspecific mental retardation

X-linked nonspecific mental retardation (MRX) has a frequency of 0.15% in the male population and is caused by defects in several different genes on the human X chromosome. Genotype-phenotype correlations in male patients with a partial nullisomy of the X chromosome have suggested that at least one locus involved in MRX is on Xp22.3. Previous deletion mapping has shown that this gene resides between markers DXS1060 and DXS1139, a region encompassing approximately 1.5 Mb of DNA. Analyzing the DNA of 15 males with Xp deletions, we were able to narrow this MRX critical interval to approximately 15 kb of DNA. Only one gene, VCX-A (variably charged, X chromosome mRNA on CRI-S232A), was shown to reside in this interval. Because of a variable number of tandem 30-bp repeats in the VCX-A gene, the size of the predicted protein is 186-226 amino acids. VCX-A belongs to a gene family containing at least four nearly identical paralogues on Xp22.3 (VCX-A, -B, -B1, and -C) and two on Yq11.2 (VCY-D, VCY-E), suggesting that the X and Y copies were created by duplication events. We have found that VCX-A is retained in all patients with normal intelligence and is deleted in all patients with mental retardation. There is no correlation between the presence or absence of VCX-B1, -B, and VCX-C and mental status in our patients. These results suggest that VCX-A is sufficient to maintain normal mental development.

Automation for genomics, part two: sequencers, microarrays, and future trends

Automation for genomics has enabled a 43-fold increase in the total finished human genomic sequence in the world in the past four years. This is the second half of a two-part, noncomprehensive review that presents an overview of different types of automation equipment used in genome sequencing. The first part of the review, published in the previous issue, focused on automated procedures used to prepare DNA for sequencing or analysis. This second part of the review presents a look at available DNA sequencers and array technology and concludes with a look at future technologies. Alternate sequencing technologies including mass spectrometry, biochips, and single molecule analysis are included in this review.

Sequence and expression of the kettin gene in Drosophila melanogaster and Caenorhabditis elegans

Kettin is a large modular protein associated with thin filaments in the Z-disc region of insect muscles. The sequence of a 21.3 kb contig of the Drosophila gene has been determined. The corresponding protein sequence has 35 immunoglobulin-like (Ig) domains which are separated by shorter linker sequences, except near the N and C termini of the molecule where linker sequences are short or missing. This confirms a model in which each Ig domain binds to an actin protomer. The Drosophila kettin gene is at 62C 1-3 on the third chromosome. Two P-element insertions, l(3)j1D7 and l(3)rL182 are in the kettin gene, and complementation tests showed that existing l(3)dre8 mutations are in the same gene. The RNA was detected in wild-type Drosophila embryos at stage 11, first in the gut invagination region of the mesoderm, and by stage 13 in both visceral and somatic mesoderm. Somatic mesoderm expression became segmental at stage 13. RNA expression was greatly reduced in embryos of P-element homozygotes but normal in heterozygotes. The structure of the flight muscle in all the heterozygous mutants was normal, including the myofibril-cuticle connections, and they were able to fly. Kettin sequence homologous to the Drosophila protein, was identified in the Caenorhabditis elegans genome database. The RNA was detected in pharyngeal, body wall and anal depressor muscles of larvae and adult worms, as well as in the male gonad. Antibody to insect kettin labelled the pharyngeal, body wall, anal depressor and proximal gonadal muscles in adult worms. Body wall muscles were labelled in an obliquely striated pattern consistent with the Z-disc localisation in insect muscle. The relationship of kettin to D-titin, which has been assigned to the same chromosomal locus in Drosophila, is discussed.

Dynamics of gene expression revealed by comparison of serial analysis of gene expression transcript profiles from yeast grown on two different carbon sources

We describe a genome-wide characterization of mRNA transcript levels in yeast grown on the fatty acid oleate, determined using Serial Analysis of Gene Expression (SAGE). Comparison of this SAGE library with that reported for glucose grown cells revealed the dramatic adaptive response of yeast to a change in carbon source. A major fraction (>20%) of the 15,000 mRNA molecules in a yeast cell comprised differentially expressed transcripts, which were derived from only 2% of the total number of approximately 6300 yeast genes. Most of the mRNAs that were differentially expressed code for enzymes or for other proteins participating in metabolism (e.g., metabolite transporters). In oleate-grown cells, this was exemplified by the huge increase of mRNAs encoding the peroxisomal beta-oxidation enzymes required for degradation of fatty acids. The data provide evidence for the existence of redox shuttles across organellar membranes that involve peroxisomal, cytoplasmic, and mitochondrial enzymes. We also analyzed the mRNA profile of a mutant strain with deletions of the PIP2 and OAF1 genes, encoding transcription factors required for induction of genes encoding peroxisomal proteins. Induction of genes under the immediate control of these factors was abolished; other genes were up-regulated, indicating an adaptive response to the changed metabolism imposed by the genetic impairment. We describe a statistical method for analysis of data obtained by SAGE.

Ultra-thin-layer agarose gel electrophoresis. I. Effect of the gel concentration and temperature on the separation of DNA fragments

A novel, rapid and efficient separation method is described for the analysis of double stranded (ds) DNA fragments in the form of horizontal ultra-thin-layer agarose gel electrophoresis. This separation technique combines the multilane, high-throughput separation format of agarose slab gel electrophoresis with the excellent performance of capillary electrophoresis. The electrophoretic separation of the fluorophore (Cy5)-labeled dsDNA molecules were imaged in real time by a scanning laser-induced fluorescence/avalanche photodiode detection system. Effects of the gel concentration (Ferguson plot) and separation temperature (Arrhenius plot) on the migration characteristics of the DNA fragments are discussed. An important genotyping application is also shown by characterizing the polymorphic region (2 X or 4 X 48 base pair repeats) of the dopamine D4 receptor gene (D4DR, exon III region) for ten individuals, using PCR technology with Cy5-labeled primers and ultra-thin-layer agarose gel electrophoresis.

Membrane-mediated sample loading for automated DNA sequencing

A new and improved sample loading method for DNA sequencing gels using oligo/polynucleotide binding membranes is described. The labeled DNA sequencing fragments were spotted onto a membrane sample loader, which was then placed in contact with the precast polyacrylamide separation gel. In this way, the time-consuming sample well loading by the tedious pipetting procedure was avoided. The spotted DNA fragments remain immobilized on the membrane until the separation process is initiated by the application of the electric field (an active DNA release mechanism). This novel technique enables sample loading outside of the separation platform, thereby allowing full utilization of various automated sample preparation and liquid handling (robotics) systems, resulting in "real" automated DNA sequencing. The loaded membranes can be stored for more than 24 hours for later use.

A pneumatic device for rapid loading of DNA sequencing gels

This work describes the design and construction of a device that facilitates the loading of DNA samples onto polyacrylamide gels for detection in the Perkin Elmer/Applied Biosystems (PE/ABI) 373 and 377 DNA sequencing instruments. The device is mounted onto the existing gel cassettes and makes the process of loading high-density gels less cumbersome while the associated time and errors are reduced. The principle of operation includes the simultaneous transfer of the entire batch of samples, in which a spring-loaded air cylinder generates positive pressure and flexible silica capillaries transfer the samples. A retractable capillary array carrier allows the delivery ends of the capillaries to be held up clear of the gel during loader attachment on the gel plates, while enabling their insertion in the gel wells once the device is securely mounted. Gel-loading devices capable of simultaneously transferring 72 samples onto the PE/ABI 373 and 377 are currently being used in our production sequencing groups while a 96-sample transfer prototype undergoes testing.