Digital direct detection of microRNAs using single molecule arrays

An array of femtoliter wells for sensitive detection of copper using click chemistry

Sensitive detection of copper ion (Cu2+), which is of great importance for environmental pollution and human health, is crucial. In this study, we present a highly sensitive method for measuring Cu2+ in an array of femtoliter wells. In brief, magnetic beads (MBs) modified with alkyne groups were bound to the azide groups of biotin-PEG3-azide (bio-PEG-N3) via Cu+-catalyzed click chemistry. Cu+ in the click chemistry reaction was generated by reducing Cu2+ with sodium ascorbate. Following the ligation, the surface of the MBs was modified with biotin, which could be labeled with streptavidin-β-galactosidase (SβG). The MBs complex was then suspended in β-galactosidase substrate fluorescein-di-β-d-galactopyranoside (FDG), and loaded into the array of femtoliter wells. The MBs sank into the wells due to gravity, and the resulting fluorescent product, generated from the reaction between SβG on the surface of the MBs and FDG, was confined within the wells. The number of fluorescent wells increased with higher Cu2+ concentrations. The bright-field and fluorescent images of the wells were acquired using an inverted fluorescent microscope. The detection limit of this assay for Cu2+ was 1 nM without signal amplification, which was 103 times lower than that of traditional fluorescence detection assays.

Ultrasensitive upconverting nanoprobes for in situ imaging of drug-induced liver injury using miR-122 as the biomarker

Drug-induced liver injury (DILI) is a frequent adverse drug reaction. The current clinical diagnostic methods are inadequate for accurate and early detection of DILI due to the lack of effective diagnostic biomarkers. Hepatocyte-specific miR-122 is released from injured hepatocytes promptly and its efflux is significantly correlated with the progression of DILI. Therefore, achieving precise in situ detection of miR-122 with high sensitivity is vital for early visualization of DILI. Herein, a new nanoprobe, consisting of miR-122 aptamer, upconversion nanoparticles (UCNPs) and Prussian blue nanoparticles (PBNPs) was introduced for the early and sensitive detection of DILI in situ. As the nanoprobes reached in the liver, miR-122 aptamer-based entropy-driven strand displacement (ESDR) signal amplification reaction was triggered and luminescence resonance energy transfer (LRET) between UCNPs and PBNPs was responded to achieve the high-fidelity detection of DILI. A negative correlation was observed between the intensity of upconversion luminescence (UCL) and the concentration of miR-122. UCL imaging conducted both in vivo and ex vivo indicated that a reduction in miR-122 concentration led to an increase in UCL intensity, revealing a precise state of DILI. The detection technique demonstrated a positive correlation between signal intensity and severity, offering a more straightforward and intuitive method of visualizing DILI.

A Facile Strategy for Multiplex Protein Detection by a Fluorescent Microsphere-Based Digital Immunoassay

The digital immunoassay is a highly sensitive detection technique based on single-molecule counting and is widely used in the ultrasensitive detection of biomarkers. Herein, we developed a fluorescent microsphere-based digital immunoassay (FMDIA) by employing fluorescent microspheres as both the carriers for immunoreaction and fluorescent reports for imaging. In this approach, the target protein in the sample was captured by fluorescent microspheres to form a biotin-labeled sandwich immunocomplex, and then, the fluorescent microspheres containing the target protein molecules were captured by adding streptavidin-coated magnetic beads (SA-MBs). By counting the proportion of fluorescence-positive magnetic beads, the concentration of the target protein can be precisely quantified. As a proof of concept, α fetoprotein (AFP) and human interleukin-6 (IL-6) were used to assess the analytical performance of the proposed FMDIA, and limit of detection (LOD) values of 21 pg/mL (0.30 pM) and 0.19 pg/mL (7.3 fM) were achieved, respectively. The results of AFP detection in serum samples of patients and healthy people were consistent with the reference values given by the hospital. Furthermore, by adding fluorescent microspheres of various colors for encoding, the proposed FMDIA can easily realize the simultaneous detection of multiple proteins without the need to introduce multiple modified magnetic beads. This multiplex protein detection strategy, in which the reactions are first carried out on the fluorescent microspheres and then magnetic beads are used to capture the fluorescent reporters containing the target molecules, provides a new idea for digital assays.

Multiplexed miRNA and Protein Analysis Using Digital Quantitative PCR in Microwell Arrays

Proteins and microRNAs (miRNAs) act in tandem within biological pathways to regulate cellular functions, and their misregulation has been correlated to numerous diseases. Because of their interconnectedness, both miRNAs and proteins must be evaluated together to obtain accurate insights into the molecular pathways of pathogenesis. However, few analytical techniques can measure both classes of biomolecules in parallel from a single biological sample. Here, microfluidic digital quantitative PCR (dqPCR) was developed to simultaneously quantify miRNA and protein targets in a multiplexed assay using a single detection chemistry. This streamlined analysis was achieved by integrating base-stacking PCR and immuno-PCR in a microfluidic array platform. Analyses of let-7a (miRNA) and IL-6 (protein) were first optimized separately to identify thermocycling and capture conditions amenable to both biomolecules. Singleplex dqPCR studies exhibited the expected digital signals and quantification cycles for both analytes over a range of concentrations. Multiplexed analyses were then conducted to quantify both let-7a and IL-6 with high sensitivity (LODs ∼ 3 fM) over a broad dynamic range (5-5000 fM) using only standard PCR reagents. This multiplexed dqPCR was then translated to the analysis of HEK293 cell lysate, where endogenous let-7a and IL-6 were measured simultaneously without sample purification or pretreatment. Collectively, these studies demonstrate that the integration of BS-PCR and immuno-PCR achieves a sensitive and streamlined approach for multiplexed analyses of miRNAs and proteins, which will enable researchers to gain better insights into disease pathogenesis in future applications.

(Eu-MOF)-derived Smart luminescent sensing for Ultrasensitive on-site detection of MiR-892b

MicroRNAs (miRNAs) are important biomacromolecules used as biomarkers for the diagnosis of several diseases. However, current detection strategies are limited by expensive equipment and complicated procedures. Here, we develop a portable, sensitive, and stable (Eu-MOF)-based sensing platform to detect miRNA via smartphone. The Eu-MOF absorbs the carboxyfluorescein (FAM)-tagged probe DNA (pDNA) to generate hybrid pDNA@Eu-MOF, which can efficiently quench the fluorescence of FAM through a photoinduced electron transfer (PET) process. When integrated with a smartphone, the nonemissive pDNA@ Eu-MOF hybrid could be utilized as a portable and sensitive platform to sense miRNA (miR-892b) with a detection limit of 0.32 pM, which could be even distinguished by the naked eye. Moreover, this system demonstrates high selectivity for identifying miRNA family members with single-base mismatches. Furthermore, the expression levels of miRNA in cancer cell samples could be analyzed accurately. Therefore, the proposed method offers a promising guideline for the design of MOF-based sensing strategies and expands their potential applications for diagnostic purposes.

Nucleic Acid Amplification-Free Digital Detection Method for SARS-CoV-2 RNA Based on Droplet Microfluidics and CRISPR-Cas13a

Most of the methods currently developed for RNA detection based on CRISPR were combined with nucleic acid amplification. As a result, such methods inevitably led to certain disadvantages such as multiple operations, expensive reagents, and amplification bias. To solve the above problems, we developed a highly sensitive and specific nucleic acid amplification-free digital detection method for SARS-CoV-2 RNA based on droplet microfluidics and CRISPR-Cas13a. In this assay, thousands of monodisperse droplets with a size of 30 μm were generated within 2 min by a negative pressure-driven microfluidic chip. By confining a single target RNA recognition event to an independent droplet, the collateral cleavage products of activated Cas13a could be accumulated in one droplet. By combining the droplet microfluidics and CRISPR-Cas13a, SARS-CoV-2 RNA could be easily detected within 30 min with a detection limit of 470 aM. The performance of this assay was verified by specificity experiments and spiking and recovery experiments with human saliva. Compared with many developed methods for SARS-CoV-2 RNA detection, our method is time- and reagent-saving and easy to operate. Taken together, this digital detection method based on droplet microfluidics and CRISPR-Cas13a provides a promising approach for RNA detection in clinical diagnostics.

Amplification-free microRNA profiling with femtomolar sensitivity on a plasmonic enhanced fluorescence nano-chip

MicroRNAs (miRNAs) are a class of small, non-coding RNA molecules involved in the regulation of gene expression, thus considered as promising biomarkers for cancer, cardiovascular diseases, neurodegenerative diseases, etc. However, quantitative analysis of miRNAs faces challenges owing to their high homology, small size & ultra-low abundance, and disease occurrence is often related to abnormal expression of multiple miRNAs where method for parallel miRNAs analysis is required. In this work, multiplexed analysis of miRNAs was established on a plasmonic nano-chip capable of fluorescence enhancement in the near-infrared region. Combined with polyadenylation at the hydroxyl terminate of target miRNA to afford abundant sites for fluorophore labeling, our assay achieved amplification-free detection of miRNAs from nM to fM with the limit of detection down to ca. 5 fM. A miRNA panel was constructed to detect 10 miRNAs differentially expressed in MCF-7 and A549 cell lines and validated with qRT-PCR, demonstrating the practical application of this method. This scalable platform can be customized for different miRNA panels, facilitating multiple miRNA profiling for various diseases.

Orderly Aggregated Catalytic Hairpin Assembly for Synchronous Ultrasensitive Detecting and High-Efficiency Co-Localization Imaging of Dual-miRNAs in Living Cells

In this work, the orderly aggregated catalytic hairpin assembly (OA-CHA) was developed for synchronous ultrasensitive detection and high-efficiency colocalization imaging of dual-miRNAs by a carefully designed tetrahedral conjugated ladder DNA structure (TCLDS). Exactly, two diverse hairpin probes were fixed on tetrahedron conjugated DNA nanowires to form the TCLDS without fluorescence response, which triggered OA-CHA in the aid of output DNA 1 and output DNA 2 produced by targets miRNA-217 and miRNA-196a cycle to generate TCLDS with remarkable fluorescence response. Impressively, compared with the traditional CHA strategy, OA-CHA avoided the fluorescence group and quenching group from approaching again because of the spatial confinement effect to significantly enhance the fluorescence signal, resulting in the simultaneous ultrasensitive detection of dual-miRNAs with detection limits of 21 and 32 fM for miRNA-217 and miRNA-196a, respectively. Meanwhile, the TCLDS with lower diffusivity could achieve accurate localization imaging for reflecting the spatial distribution of dual-miRNAs in living cells. The strategy based on OA-CHA provided a flexible and programmable nucleic amplification method for the synchronous ultrasensitive detection and precise imaging of multiple biomarkers and had potential in disease diagnostics..

Digital and Absolute Assays for Low Abundance Molecular Biomarkers

There has been a recent surge of advances in biomolecular assays based on the measurement of discrete molecular targets as opposed to signals averaged across molecular ensembles. Many of these "digital" assay designs derive from now-mature technologies involving single-molecule imaging and microfluidics and provide an assortment of new modalities to quantify nucleic acids and proteins in biospecimens such as blood and tissue homogenates. A primary new benefit is the robust detection of trace analytes at attomolar to femtomolar concentrations for which many ensemble assays cannot distinguish signals above noise levels. In addition, multiple biomolecules can be differentiated within a mixture using optical barcodes, with much faster and simpler readouts compared with sequencing methods. In ideal digital assays, signals should, in theory, further represent absolute molecular counts, rather than relative levels, eliminating the need for calibration standards that are the mainstay of typical assays. Several digital assay platforms have now been commercialized but challenges hinder the adoption and diversification of these new formats, as there are broad needs to balance sensitivity and dynamic range of detection, increase analyte multiplexing, improve sample throughput, and reduce cost. Our lab and others have developed technologies to address these challenges by redesigning molecular probes and labels, improving molecular transport within detection focal volumes, and applying solution-based readout methods in flow.This Account describes the principles, formats, and design constraints of digital biomolecular assays that apply optical labels toward the goal of simple and routine target counting that may ultimately approach absolute readout standards. The primary challenges can be understood from fundamental concepts in thermodynamics and kinetics of association reactions, mass transport, and discrete statistics. Major advances include (1) new inorganic nanocrystal probes for more robust counting compared with dyes, (2) diverse molecular amplification tools that endow attachment of numerous labels to single targets, (3) specialized surfaces with patterned features for electromagnetic coupling to labels for signal amplification, (4) surface capture enhancement methods to concentrate targets through disruption of diffusion depletion zones, and (5) flow counting in which analytes are rapidly counted in solution without pull-down to a surface. Further progress and integration of these tools for biomolecular counting could improve the precision of laboratory measurements in life sciences research and benefit clinical diagnostic assays for low abundance biomarkers in limiting biospecimen volumes that are out of reach of traditional ensemble-level bioassays.

NF-κB Transcriptional Activity Indispensably Mediates Hypoxia–Reoxygenation Stress-Induced microRNA-210 Expression

Ischemia–reperfusion (I-R) injury is a cardinal pathophysiological hallmark of ischemic heart disease (IHD). Despite significant advances in the understanding of what causes I-R injury and hypoxia–reoxygenation (H-R) stress, viable molecular strategies that could be targeted for the treatment of the deleterious biochemical pathways activated during I-R remain elusive. The master hypoxamiR, microRNA-210 (miR-210), is a major determinant of protective cellular adaptation to hypoxia stress but exacerbates apoptotic cell death during cellular reoxygenation. While the hypoxia-induced transcriptional up-regulation of miR-210 is well delineated, the cellular mechanisms and molecular entities that regulate the transcriptional induction of miR-210 during the cellular reoxygenation phase have not been elucidated yet. Herein, in immortalized AC-16 cardiomyocytes, we delineated the indispensable role of the ubiquitously expressed transcription factor, NF-κB (nuclear factor kappa-light-chain-enhancer of activated B cells) in H-R-induced miR-210 expression during cellular reoxygenation. Using dominant negative and dominant active expression vectors encoding kinases to competitively inhibit NF-κB activation, we elucidated NF-κB activation as a significant mediator of H-R-induced miR-210 expression. Ensuing molecular assays revealed a direct NF-κB-mediated transcriptional up-regulation of miR-210 expression in response to the H-R challenge that is characterized by the NF-κB-mediated reorchestration of the entire repertoire of histone modification changes that are a signatory of a permissive actively transcribed miR-210 promoter. Our study confers a novel insight identifying NF-κB as a potential novel molecular target to combat H-R-elicited miR-210 expression that fosters augmented cardiomyocyte cell death.

Digital detection of proteins

This paper reviews methods for detecting proteins based on molecular digitization, i.e., the isolation and detection of single protein molecules or singulated ensembles of protein molecules. The single molecule resolution of these methods has resulted in significant improvements in the sensitivity of immunoassays beyond what was possible using traditional "analog" methods: the sensitivity of some digital immunoassays approach those of methods for measuring nucleic acids, such as the polymerase chain reaction (PCR). The greater sensitivity of digital protein detection has resulted in immuno-diagnostics with high potential societal impact, e.g., the early diagnosis and therapeutic intervention of Alzheimer's Disease. In this review, we will first provide the motivation for developing digital protein detection methods given the limitations in the sensitivity of analog methods. We will describe the paradigm shift catalyzed by single molecule detection, and will describe in detail one digital approach - which we call digital bead assays (DBA) - based on the capture and labeling of proteins on beads, identifying "on" and "off" beads, and quantification using Poisson statistics. DBA based on the single molecule array (Simoa) technology have sensitivities down to attomolar concentrations, equating to ∼10 proteins in a 200 μL sample. We will describe the concept behind DBA, the different single molecule labels used, the ways of analyzing beads (imaging of arrays and flow), the binding reagents and substrates used, and integration of these technologies into fully automated and miniaturized systems. We provide an overview of emerging approaches to digital protein detection, including those based on digital detection of nucleic acids labels, single nanoparticle detection, measurements using nanopores, and methods that exploit the kinetics of single molecule binding. We outline the initial impact of digital protein detection on clinical measurements, highlighting the importance of customized assay development and translational clinical research. We highlight the use of DBA in the measurement of neurological protein biomarkers in blood, and how these higher sensitivity methods are changing the diagnosis and treatment of neurological diseases. We conclude by summarizing the status of digital protein detection and suggest how the lab-on-a-chip community might drive future innovations in this field.

Dual nucleases-assisted cyclic amplification using polydopamine nanospheres-based biosensors for one-pot detection of microRNAs

The accurate detection of microRNAs (miRNAs) is essential in the early diagnosis and treatment of cancers. Existing miRNA detection methods represented by nucleic acid amplification (NAA) techniques, such as qRT-PCR, suffer from the small size of miRNAs and lead to limited practicability. CRISPR Cas13a system, another valuable toolbox for nucleic acid detection, relies heavily on the behaviors of accompanying isothermal NAA techniques, which prompts similar deficiencies in miRNA detection. In this study, a dual nucleases-assisted cyclic amplification (DUNCAN) strategy has been established to replace NAA techniques for one-pot detection of miRNAs. The DUNCAN strategy contained an initial reaction based on CRISPR Cas13a for target recognition, and an accompanied cyclic reaction using DNA probes protected by polydopamine nanospheres (PDANSs) for signal amplification and result readout. Exemplified by miR-19b, which has been confirmed to be related to several tumors, the quantitative detection through the DUNCAN strategy was achieved in the dynamic range of 10-10⁶ fM, with a calculated detection limit of 1.27 fM. Besides, the DUNCAN strategy presented well selectivity and anti-interference performance for accurate detection of miR-19b in complex miRNA mixtures, different cell lines and clinical samples compared with qRT-PCR. All these performances demonstrated the promising potential of the DUNCAN strategy in clinical miRNA detection and diagnosis.

Programmable Ultrasensitive Molecular Amplifier for Digital and Multiplex MicroRNA Quantification

Digital bioassays, popularized by digital PCR, provide some of the most robust and accurate methods for nucleic acid quantification. In this chapter, we detail a protocol for digital, isothermal, and multiplex detection of microRNAs, which relies on a recently developed amplification method. Our approach uses programmable ultrasensitive molecular amplifiers (PUMAs) to reveal the presence of target microRNAs randomly isolated in picoliter-size microfluidic droplets. Nonspecific amplification in droplets that do not contain a target is eliminated by an active threshold mechanism. Multiple circuits can be assembled for the multiplex digital detection of up to three targets. We finally present the option of using fluorescent dropcodes to streamline the assay and analyze more than a dozen samples in parallel.

Advances in optical counting and imaging of micro/nano single-entity reactors for biomolecular analysis

Ultrasensitive detection of biomarkers is of paramount importance in various fields. Superior to the conventional ensemble measurement-based assays, single-entity assays, especially single-entity detection-based digital assays, not only can reach ultrahigh sensitivity, but also possess the potential to examine the heterogeneities among the individual target molecules within a population. In this review, we summarized the current biomolecular analysis methods that based on optical counting and imaging of the micro/nano-sized single entities that act as the individual reactors (e.g., micro-/nanoparticles, microemulsions, and microwells). We categorize the corresponding techniques as analog and digital single-entity assays and provide detailed information such as the design principles, the analytical performance, and their implementation in biomarker analysis in this work. We have also set critical comments on each technique from these aspects. At last, we reflect on the advantages and limitations of the optical single-entity counting and imaging methods for biomolecular assay and highlight future opportunities in this field.

Highly Selective FRET-Aided Single-Molecule Counting of MicroRNAs Labeled by Splinted Ligation

MicroRNAs (miRNAs) are short non-coding RNAs that play an important role in regulating gene expression. Since miRNAs are abnormally expressed in various cancers, they are considered to be promising biomarkers for early cancer diagnosis. However, the short length and strong sequence similarity among miRNAs make their reliable quantification very challenging. We developed a highly selective amplification-free miRNA detection method based on Förster resonance energy transfer (FRET)-aided single-molecule counting. miRNAs were selectively labeled with FRET probes using splinted ligation. When imaged with a single-molecule FRET setup, the miRNA molecules were accurately identified by the probe's FRET. miRNA concentrations were estimated from the count of molecules. The high sensitivity of the method in finding sparse molecules enabled us to achieve a limit of detection of 31-56 amol for miR-125b, miR-100, and miR-99a. Single nucleotide mismatch could be discriminated with a very high target-to-mismatch ratio. The method accurately measured the high expression of miR-125b in gastric cancer cells, which agreed well with previous reports. The high sensitivity and accuracy of this technique demonstrated its clinical potential as a robust miRNA detection method.

Attomolar sensitivity microRNA detection using real-time digital microarrays

MicroRNAs (miRNAs) are a family of noncoding, functional RNAs. With recent developments in molecular biology, miRNA detection has attracted significant interest, as hundreds of miRNAs and their expression levels have shown to be linked to various diseases such as infections, cardiovascular disorders and cancers. A powerful and high throughput tool for nucleic acid detection is the DNA microarray technology. However, conventional methods do not meet the demands in sensitivity and specificity, presenting significant challenges for the adaptation of miRNA detection for diagnostic applications. In this study, we developed a highly sensitive and multiplexed digital microarray using plasmonic gold nanorods as labels. For proof of concept studies, we conducted experiments with two miRNAs, miRNA-451a (miR-451) and miRNA-223-3p (miR-223). We demonstrated improvements in sensitivity in comparison to traditional end-point assays that employ capture on solid phase support, by implementing real-time tracking of the target molecules on the sensor surface. Particle tracking overcomes the sensitivity limitations for detection of low-abundance biomarkers in the presence of low-affinity but high-abundance background molecules, where endpoint assays fall short. The absolute lowest measured concentration was 100 aM. The measured detection limit being well above the blank samples, we performed theoretical calculations for an extrapolated limit of detection (LOD). The dynamic tracking improved the extrapolated LODs from femtomolar range to \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\sim$$\end{document}∼ 10 attomolar (less than 1300 copies in 0.2 ml of sample) for both miRNAs and the total incubation time was decreased from 5 h to 35 min.

Enzyme-based digital bioassay technology - key strategies and future perspectives

Digital bioassays based on single-molecule enzyme reactions represent a new class of bioanalytical methods that enable the highly sensitive detection of biomolecules in a quantitative manner. Since the first reports of these methods in the 2000s, there has been significant growth in this new bioanalytical strategy. The principal strategy of this method is to compartmentalize target molecules in micron-sized reactors at the single-molecule level and count the number of microreactors showing positive signals originating from the target molecule. A representative application of digital bioassay is the digital enzyme-linked immunosorbent assay (ELISA). Owing to their versatility, various types of digital ELISAs have been actively developed. In addition, some disease markers and viruses possess catalytic activity, and digital bioassays for such enzymes and viruses have, thus, been developed. Currently, with the emergence of new microreactor technologies, the targets of this methodology are expanding from simple enzymes to more complex systems, such as membrane transporters and cell-free gene expression. In addition, multiplex or multiparametric digital bioassays have been developed to assess precisely the heterogeneities in sample molecules/systems that are obscured by ensemble measurements. In this review, we first introduce the basic concepts of digital bioassays and introduce a range of digital bioassays. Finally, we discuss the perspectives of new classes of digital bioassays and emerging fields based on digital bioassay technology.

Attomolar Sensitivity in Single Biomarker Counting upon Aqueous Two-Phase Surface Enrichment

From longstanding techniques like enzyme-linked immunosorbent assay (ELISA) to modern next-generation sequencing, many of the most sensitive and specific biomarker detection assays require capture of the analyte at a surface. While surface-based assays provide advantages, including the ability to reduce background by washing away excess reagents and/or increase specificity through analyte-specific capture probes, the limited efficiency of capture from dilute solution often restricts assay sensitivity to the femtomolar-to-nanomolar range. Although assays for many nucleic acid analytes can decrease limits of detection (LODs) to the subfemtomolar range using polymerase chain reaction, such amplification may introduce biases, errors, and an increased risk of sample cross-contamination. Furthermore, many analytes cannot be amplified easily, including short nucleic acid fragments, epigenetic modifications, and proteins. To address the challenge of achieving subfemtomolar LODs in surface-based assays without amplification, we exploit an aqueous two-phase system (ATPS) to concentrate target molecules in a smaller-volume phase near the assay surface, thus increasing capture efficiency compared to passive diffusion from the original solution. We demonstrate the utility of ATPS-enhanced capture via single molecule recognition through equilibrium Poisson sampling (SiMREPS), a microscopy technique previously shown to possess >99.9999% detection specificity for DNA mutations but an LOD of only ∼1-5 fM. By combining ATPS-enhanced capture with a Förster resonance energy transfer (FRET)-based probe design for rapid data acquisition over many fields of view, we improve the LOD ∼ 300-fold to <10 aM for an EGFR exon 19 deletion mutation. We further validate this ATPS-assisted FRET-SiMREPS assay by detecting endogenous exon 19 deletion molecules in cancer patient blood plasma.

Microfluidic Digital Quantitative PCR to Measure Internal Cargo of Individual Liposomes

Lipid nanoparticles serve as drug delivery vehicles for biopharmaceutical products. The lipid membrane shields internal nucleic-acid drug cargo from enzymatic degradation and facilitates cellular uptake of the drug. However, existing methods to assess drug loading within liposomes are limited to averaged bulk measurements, which obscures heterogeneity of the biopharmaceutical formulation. This report describes the development of a single-liposome analysis method to measure copy numbers of DNA within liposomes and assess population heterogeneity. This novel measurement was achieved by integrating two orthogonal polymerase chain reaction (PCR) techniques─digital PCR (dPCR) and quantitative PCR (qPCR)─within a single microfluidic assay. The dPCR dimension quantified liposomes to validate their capture in the single-liposome analysis regime. The qPCR dimension quantified DNA copy numbers packaged within each liposome. The ability of digital quantitative PCR (dqPCR) to analyze large numbers of individual liposomes in parallel revealed significant population heterogeneity, which could not be obtained from standard bulk analysis methods. Our innovative measurement of internal DNA cargo from single liposomes has the potential to inform liposome synthesis procedures and create more uniform liposomal biopharmaceutical formulations to enhance drug safety and efficacy.

Microfluidics Technology in SARS-CoV-2 Diagnosis and Beyond: A Systematic Review

With the progression of the COVID-19 pandemic, new technologies are being implemented for more rapid, scalable, and sensitive diagnostics. The implementation of microfluidic techniques and their amalgamation with different detection techniques has led to innovative diagnostics kits to detect SARS-CoV-2 antibodies, antigens, and nucleic acids. In this review, we explore the different microfluidic-based diagnostics kits and how their amalgamation with the various detection techniques has spearheaded their availability throughout the world. Three other online databases, PubMed, ScienceDirect, and Google Scholar, were referred for articles. One thousand one hundred sixty-four articles were determined with the search algorithm of microfluidics followed by diagnostics and SARS-CoV-2. We found that most of the materials used to produce microfluidics devices were the polymer materials such as PDMS, PMMA, and others. Centrifugal force is the most commonly used fluid manipulation technique, followed by electrochemical pumping, capillary action, and isotachophoresis. The implementation of the detection technique varied. In the case of antibody detection, spectrometer-based detection was most common, followed by fluorescence-based as well as colorimetry-based. In contrast, antigen detection implemented electrochemical-based detection followed by fluorescence-based detection, and spectrometer-based detection were most common. Finally, nucleic acid detection exclusively implements fluorescence-based detection with a few colorimetry-based detections. It has been further observed that the sensitivity and specificity of most devices varied with implementing the detection-based technique alongside the fluid manipulation technique. Most microfluidics devices are simple and incorporate the detection-based system within the device. This simplifies the deployment of such devices in a wide range of environments. They can play a significant role in increasing the rate of infection detection and facilitating better health services.

Accelerated Digital Biodetection Using Magneto-plasmonic Nanoparticle-Coupled Photonic Resonator Absorption Microscopy

Rapid, ultrasensitive, and selective quantification of circulating microRNA (miRNA) biomarkers in body fluids is increasingly deployed in early cancer diagnosis, prognosis, and therapy monitoring. While nanoparticle tags enable detection of nucleic acid or protein biomarkers with digital resolution and subfemtomolar detection limits without enzymatic amplification, the response time of these assays is typically dominated by diffusion-limited transport of the analytes or nanotags to the biosensor surface. Here, we present a magnetic activate capture and digital counting (mAC+DC) approach that utilizes magneto-plasmonic nanoparticles (MPNPs) to accelerate single-molecule sensing, demonstrated by miRNA detection via toehold-mediated strand displacement. Spiky Fe₃O₄@Au MPNPs with immobilized target-specific probes are "activated" by binding with miRNA targets, followed by magnetically driven transport through the bulk fluid toward nanoparticle capture probes on a photonic crystal (PC). By spectrally matching the localized surface plasmon resonance of the MPNPs to the PC-guided resonance, each captured MPNP locally quenches the PC reflection efficiency, thus enabling captured MPNPs to be individually visualized with high contrast for counting. We demonstrate quantification of the miR-375 cancer biomarker directly from unprocessed human serum with a 1 min response time, a detection limit of 61.9 aM, a broad dynamic range (100 aM to 10 pM), and a single-base mismatch selectivity. The approach is well-suited for minimally invasive biomarker quantification, enabling potential applications in point-of-care testing with short sample-to-answer time.

A guide to accelerated direct digital counting of single nucleic acid molecules by FRET-based intramolecular kinetic fingerprinting

Cell-free nucleic acids (cfNAs) such as short non-coding microRNA (miRNA) and circulating tumor DNA (ctDNA) that reside in bodily fluids have emerged as potential cancer biomarkers. Methods for the rapid, highly specific, and sensitive monitoring of cfNAs in biofluids have, therefore, become increasingly attractive as clinical diagnosis tools. As a next generation technology, we provide a practical guide for an amplification-free, single molecule Förster resonance energy transfer (smFRET)-based kinetic fingerprinting approach termed intramolecular single molecule recognition through equilibrium Poisson sampling, or iSiMREPS, for the rapid detection and counting of miRNA and mutant ctDNA with virtually unlimited specificity and single molecule sensitivity. iSiMREPS utilizes a pair of fluorescent detection probes, wherein one probe immobilizes the target molecules on the surface, and the other probe transiently and reversibly binds to the target to generate characteristic time-resolved fingerprints as smFRET signal that are detected in a total internal reflection fluorescence microscope. Analysis of these kinetic fingerprints enables near-perfect discrimination between specific binding to target molecules and nonspecific background binding. By accelerating kinetic fingerprinting using the denaturant formamide and reducing background signals by removing target-less probes from the surface via toehold-mediated strand displacement, iSiMREPS has been demonstrated to count miR-141 and EGFR exon 19 deletion ctDNA molecules with a limit of detection (LOD) of ~1 and 3 fM, respectively, as well as mutant allele fractions as low as 0.0001%, during a standard acquisition time of only ~10 s per field of view. In this review, we provide a detailed roadmap for implementing iSiMREPS more broadly in research and clinical diagnostics, combining rapid analysis, high specificity, and high sensitivity.

Aptamer/antibody sandwich method for digital detection of SARS-CoV2 nucleocapsid protein

Nucleocapsid protein (N protein) is the most abundant protein in SARS-CoV2 and is highly conserved, and there are no homologous proteins in the human body, making it an ideal biomarker for the early diagnosis of SARS-CoV2. However, early detection of clinical specimens for SARS-CoV2 remains a challenge due to false-negative results with viral RNA and host antibodies based testing. In this manuscript, a microfluidic chip with femtoliter-sized wells was fabricated for the sensitive digital detection of N protein. Briefly, β-galactosidase (β-Gal)-linked antibody/N protein/aptamer immunocomplexes were formed on magnetic beads (MBs). Afterwards, the MBs and β-Gal substrate fluorescein-di-β-d-galactopyranoside (FDG) were injected into the chip together. Each well of the chip would only hold one MB as confined by the diameter of the wells. The MBs in the wells were sealed by fluorocarbon oil, which confines the fluorescent (FL) product generated from the reaction between β-Gal and FDG in the individual femtoliter-sized well and creates a locally high concentration of the FL product. The FL images of the wells were acquired using a conventional inverted FL microscope. The number of FL wells with MBs (FL wells number) and the number of wells with MBs (MBs wells number) were counted, respectively. The percentage of FL wells was calculated by dividing (FL wells number) by (MBs wells number). The higher the percentage of FL wells, the higher the N protein concentration. The detection limit of this digital method for N protein was 33.28 pg/mL, which was 300 times lower than traditional double-antibody sandwich based enzyme-linked immunosorbent assay (ELISA).

miR-210 Regulates Apoptotic Cell Death during Cellular Hypoxia and Reoxygenation in a Diametrically Opposite Manner

Apoptotic cell death of cardiomyocytes is a characteristic hallmark of ischemia-reperfusion (I/R) injury. The master hypoxamiR, microRNA-210 (miR-210), is considered the primary driver of the cellular response to hypoxic stress. However, to date, no consensus has emerged with regards to the polarity of the miR-210-elicited cellular response, as miR-210 has been shown to exacerbate as well as attenuate hypoxia-driven apoptotic cell death. Herein, in AC-16 cardiomyocytes subjected to hypoxia-reoxygenation (H-R) stress, we unravel novel facets of miR-210 biology and resolve the biological response mediated by miR-210 into the hypoxia and reoxygenation temporal components. Using transient overexpression and decoy/inhibition vectors to modulate miR-210 expression, we elucidated a Janus role miR-210 in the cellular response to H-R stress, wherein miR-210 mitigated the hypoxia-induced apoptotic cell death but exacerbated apoptotic cell death during cellular reoxygenation. We further delineated the underlying cellular mechanisms that confer this diametrically opposite effect of miR-210 on apoptotic cell death. Our exhaustive biochemical assays cogently demonstrate that miR-210 attenuates the hypoxia-driven intrinsic apoptosis pathway, while significantly augmenting the reoxygenation-induced caspase-8-mediated extrinsic apoptosis pathway. Our study is the first to unveil this Janus role of miR-210 and to substantiate the cellular mechanisms that underlie this functional duality.

Trimester-specific associations between extracellular vesicle microRNAs and fetal growth

OBJECTIVE

Placenta-derived extracellular vesicles and their cargoes, especially microRNAs (EV-miRNAs), may contribute to fetal and placental development. During pregnancy, the levels of several maternal blood EV-miRNAs, including miRNAs of placental origin, vary among individuals and change throughout gestation. However, the effects of these miRNAs on fetal growth and trimester-specificity have not been fully elucidated. The purpose of this study is to test the hypothesis that the serum levels of two extracellular vesicles (EV)-miRNAs (miR-127-3p and miR-26b-5p), which may be involved in fetoplacental regulation, would be significantly associated with fetal growth in a trimester-specific manner.

MATERIALS AND METHODS

This is a single-center birth cohort of maternal serum samples obtained at both the second and third trimesters. To minimize the influence of confounding factors, the analysis was limited to singleton vaginal deliveries, resulting in 27 participants being included in this study. EV RNAs were isolated using a membrane affinity method, and the relative expression levels of miR-127-3p and miR-26b-5p were measured using the RT-qPCR method with miR-484 as control. The associations between the two EV-miRNAs and fetal and placental growth were evaluated using a linear regression model and compared between the two trimesters.

RESULTS

EV-miR-127-3p levels tended to correlate inversely with the z-scores of birth weight for gestational age (BWGA) and placental weight for gestational age (PWGA) in the second trimester, but not in the third trimester. EV-miR-26b-5p levels were positively associated with birth weight in the second trimester, but this association was weakened in the third trimester.

CONCLUSION

Our results suggest a trimester-specific association of circulating miRNA levels with fetal and placental growth. The precise roles of EV-miR-127-3p and EV-miR-26b-5p in fetal and placental development warrant further investigation.

Microchamber-Free Digital Flow Cytometric Analysis of T4 Polynucleotide Kinase Phosphatase Based on Single-Enzyme-to-Single-Bead Space-Confined Reaction

Digital bioassays have attracted extensive attention in biomedical applications due to their ultrahigh sensitivity. However, traditional digital bioassays require numerous microchambers such as droplets or microwells, which restricts their application scope. Herein, we propose a microchamber-free flow cytometric method for the digital quantification of T4 polynucleotide kinase phosphatase (T4 PNKP) based on an unprecedented phenomenon that each T4 PNKP molecule-catalyzed reaction can be spatially self-confined on a single microbead, which ultimately enables the one-target-to-one-fluorescence-positive microbead digital signal transduction. The digital signal-readout mode can clearly detect T4 PNKP concentrations as low as 1.28 × 10^-10 U/μL, making it most sensitive method to date. Significantly, T4 PNKP can be specifically distinguished from other phosphatases and nucleases in complex samples by digitally counting the fluorescence-positive microbeads, which cannot be realized by traditional bulk measurement-based methods. Taking advantage of the novel space-confined enzymatic feature of T4 PNKP, this digital mechanism can use T4 PNKP as the enzyme label to fabricate digital sensing systems toward various biomolecules such as digital enzyme-linked immunosorbent assay (ELISA). Therefore, this work not only enlarges the toolbox for high-sensitivity biomolecule detection but also opens new gates to fabricate next-generation digital assays.

Rapid kinetic fingerprinting of single nucleic acid molecules by a FRET-based dynamic nanosensor

Biofluid-derived cell-free nucleic acids such as microRNAs (miRNAs) and circulating tumor-derived DNAs (ctDNAs) have emerged as promising disease biomarkers. Conventional detection of these biomarkers by digital PCR and next generation sequencing, although highly sensitive, requires time-consuming extraction and amplification steps that also increase the risk of sample loss and cross-contamination. To achieve the direct, rapid, and amplification-free detection of miRNAs and ctDNAs with near-perfect specificity and single-molecule level sensitivity, we herein designed a single-molecule kinetic fingerprinting assay, termed intramolecular single-molecule recognition through equilibrium Poisson sampling (iSiMREPS). iSiMREPS exploits a dynamic DNA nanosensor comprising a surface anchor and a pair of fluorescent detection probes: one probe captures a target molecule onto the surface, while the other transiently interrogates the target to generate kinetic fingerprints by intramolecular single-molecule Förster resonance energy transfer (smFRET) that are recorded by single-molecule fluorescence microscopy and identify the target after kinetic filtering and data analysis. We optimize the sensor design, use formamide to further accelerate the fingerprinting kinetics, and maximize sensitivity by removing non-target-bound probes using toehold-mediated strand displacement to reduce background. We show that iSiMREPS can detect, in as little as 10 s, two distinct, promising cancer biomarkers-miR-141 and a common EGFR exon 19 deletion-reaching a limit of detection (LOD) of ~3 fM and a mutant allele fraction among excess wild-type as low as 1 in 1 million, or 0.0001%. We anticipate that iSiMREPS will find utility in research and clinical diagnostics based on its features of rapid detection, high specificity, sensitivity, and generalizability.

A novel microfluidic RNA chip for direct, single-nucleotide specific, rapid and partially-degraded RNA detection

Direct RNA detection is critical for providing the RNA insights into gene expression profiling, noncoding RNAs, RNA-associated diseases and pathogens, without reverse transcription. However, classical RNA analysis usually requires RT-PCR, which can cause bias amplification and quantitation errors. To address this challenge, herein we report a microfluidic RNA chip (the microchip prototype) for direct RNA detection, which is primarily based on RNA extension and labeling with DNA polymerase. This detection strategy is of high specificity (discriminating against single-nucleotide differences), rapidity, accuracy, nuclease resistance, and reusability. Further, we have successfully detected disease-associated RNAs in clinical samples, demonstrating its great potentials in biomedical research and clinical diagnosis.

Uncovering the Depths of the Human Proteome: Antibody-based Technologies for Ultrasensitive Multiplexed Protein Detection and Quantification

Probing the human proteome in tissues and biofluids such as plasma is attractive for biomarker and drug target discovery. Recent breakthroughs in multiplex, antibody-based, proteomics technologies now enable the simultaneous quantification of thousands of proteins at as low as sub fg/ml concentrations with remarkable dynamic ranges of up to 10-log. We herein provide a comprehensive guide to the methodologies, performance, technical comparisons, advantages, and disadvantages of established and emerging technologies for the multiplexed ultrasensitive measurement of proteins. Gaining holistic knowledge on these innovations is crucial for choosing the right multiplexed proteomics tool for applications at hand to critically complement traditional proteomics methods. This can bring researchers closer than ever before to elucidating the intricate inner workings and cross talk that spans multitude of proteins in disease mechanisms.

Advances in point-of-care testing for cardiovascular diseases

Point-of-care testing (POCT) is a specific format of diagnostic testing that is conducted without accompanying infrastructure or sophisticated instrumentation. Traditionally, such rapid sample-to-answer assays provide inferior analytical performances to their laboratory counterparts when measuring cardiac biomarkers. Hence, their potentially broad applicability is somewhat bound by their inability to detect clinically relevant concentrations of cardiac troponin (cTn) in the early stages of myocardial injury. However, the continuous refinement of biorecognition elements, the optimization of detection techniques, and the fabrication of tailored fluid handling systems to manage the sensing process has stimulated the production of commercial assays that can support accelerated diagnostic pathways. This review will present the latest commercial POC assays and examine their impact on clinical decision-making. The individual elements that constitute POC assays will be explored, with an emphasis on aspects that contribute to economically feasible and highly sensitive assays. Furthermore, the prospect of POCT imparting a greater influence on early interventions for medium to high-risk individuals and the potential to re-shape the paradigm of cardiovascular risk assessments will be discussed.

A Cascaded DNA Circuit in Bead Arrays for Quantitative Single-Cell MicroRNA Analysis

Single-cell microRNA (miRNA) analysis helps people understand the causes of diseases and formulate new disease treatment strategies. However, miRNA from a single cell is usually very rare and requires signal amplification for accurate quantification. Here, to amplify the signal, we constructed the cascaded DNA circuits consisting of catalytic hairpin assembly and hybrid chain reaction into the bead array platform, on which the uniformly distributed beads were adopted for miRNA quantification. After exponential signal amplification, a consistent linear correlation between the percentage of fluorescent beads and the copy number of miRNA was detected. The proposed bead array can achieve ultrahigh sensitivity as low as 60 copies of miR-155 and high specificity for distinguishing single nucleotide differences. This method has been successfully applied to the quantitative detection of miRNA in a single cancer cell. The high sensitivity, programmability, and simple workflow of the bead array chip will give a huge advantage in basic and clinical research.

Single-molecule amplification-free multiplexed detection of circulating microRNA cancer biomarkers from serum

MicroRNAs (miRNAs) play essential roles in post-transcriptional gene expression and are also found freely circulating in bodily fluids such as blood. Dysregulated miRNA signatures have been associated with many diseases including cancer, and miRNA profiling from liquid biopsies offers a promising strategy for cancer diagnosis, prognosis and monitoring. Here, we develop size-encoded molecular probes that can be used for simultaneous electro-optical nanopore sensing of miRNAs, allowing for ultrasensitive, sequence-specific and multiplexed detection directly in unprocessed human serum, in sample volumes as small as 0.1 μl. We show that this approach allows for femtomolar sensitivity and single-base mismatch selectivity. We demonstrate the ability to simultaneously monitor miRNAs (miR-141-3p and miR-375-3p) from prostate cancer patients with active disease and in remission. This technology can pave the way for next generation of minimally invasive diagnostic and companion diagnostic tests for cancer.

Detection of urinary microRNA biomarkers using diazo sulfonamide-modified screen printed carbon electrodes

This paper describes a straightforward electrochemical method for rapid and robust urinary microRNA (miRNA) quantification using disposable biosensors that can discriminate between urine from diabetic kidney disease (DKD) patients and control subjects. Aberrant miRNA expression has been observed in several major human disorders, and we have identified a urinary miRNA signature for DKD. MiRNAs therefore have considerable promise as disease biomarkers, and techniques to quantify these transcripts from clinical samples have significant clinical and commercial potential. Current RT-qPCR-based methods require technical expertise, and more straightforward methods such as electrochemical detection offer attractive alternatives. We describe a method to detect urinary miRNAs using diazo sulfonamide-modified screen printed carbon electrode-based biosensors that is amenable to parallel analysis. These sensors showed a linear response to buffered miR-21, with a 17 fM limit of detection, and successfully discriminated between urine samples (n = 6) from DKD patients and unaffected control subjects (n = 6) by differential miR-192 detection. Our technique for quantitative miRNA detection in liquid biopsies has potential for development as a platform for non-invasive high-throughput screening and/or to complement existing diagnostic procedures in disorders such as DKD.

In this study we have developed an electrochemical microRNA biosensor sensitive to 17 fM and capable of detecting an established downregulation of urinary miR-192 in diabetic kidney disease patients.

A fluorescent microarray platform based on catalytic hairpin assembly for MicroRNAs detection

The DNA microarray has distinctive advantages of high-throughput and less complicated operations, but tends to have a relatively low sensitivity. Catalytic hairpin assembly (CHA) is one of the most promising enzyme-free, isothermal DNA circuit for high efficient signal amplification. Here, a microarray-based catalytic hairpin assembly (mi-CHA) biosensing method has been developed to detect various miRNAs in a single test simultaneously. The target miRNA can trigger conformational transformations of hairpin-structured DNA probes on the chip surface and lead to the specific signal amplification. A significant advantage of this approach is that each duplex produced by the solid-phase CHA will be immobilized on the certain location of the chip and release fluorescent signal via the universal domain, eliminating the requirement of different fluorophores. This method has manifested a high detection sensitivity of human cancer-associated miRNAs (miR-21 and miR-155) down to 1.33 fM and promised a high specificity to distinguish single-base mismatches. Furthermore, the practicability of this method was demonstrated by analyzing target miRNAs in human serum and cancer cells. The experimental results suggest that the proposed method has high-throughput analytical potential and could be applied to many other clinical diagnosis.

Ultrasensitive Measurement of Both SARS-CoV-2 RNA and Antibodies from Saliva

Tests for COVID-19 generally measure SARS-CoV-2 viral RNA from nasal swabs or antibodies against the virus from blood. It has been shown, however, that both viral particles and antibodies against those particles are present in saliva, which is more accessible than both swabs and blood. We present methods for highly sensitive measurements of both viral RNA and antibodies from the same saliva sample. We developed an efficient saliva RNA extraction method and combined it with an ultrasensitive antibody test based on single molecule array (Simoa) technology. We apply our test to the saliva of patients who presented to the hospital with COVID-19 symptoms, some of whom tested positive with a conventional RT-qPCR nasopharyngeal swab test. We demonstrate that combining viral RNA detection by RT-qPCR with antibody detection by Simoa identifies more patients as infected than either method alone. Our results demonstrate the utility of combining viral RNA and antibody testing from saliva, a single easily accessible biofluid.

Advances in multiplexed techniques for the detection and quantification of microRNAs

MicroRNA detection is currently a crucial analytical chemistry challenge: almost 2000 papers were referenced in PubMed in 2018 and 2019 for the keywords "miRNA detection method". MicroRNAs are potential biomarkers for multiple diseases including cancers, neurodegenerative and cardiovascular diseases. Since miRNAs are stably released in bodily fluids, they are of prime interest for the development of non-invasive diagnosis methods, such as liquid biopsies. Their detection is however challenging, as high levels of sensitivity, specificity and robustness are required. The analysis also needs to be quantitative, since the aim is to detect miRNA concentration changes. Moreover, a high multiplexing capability is also of crucial importance, since the clinical potential of miRNAs probably lays in our ability to perform parallel mapping of multiple miRNA concentrations and recognize typical disease signature from this profile. A plethora of biochemical innovative detection methods have been reported recently and some of them provide new solutions to the problem of sensitive multiplex detection. In this review, we propose to analyze in particular the new developments in multiplexed approaches to miRNA detection. The main aspects of these methods (including sensitivity and specificity) will be analyzed, with a particular focus on the demonstrated multiplexing capability and potential of each of these methods.

An Ultralocalized Cas13a Assay Enables Universal and Nucleic Acid Amplification-Free Single-Molecule RNA Diagnostics

Existing methods for RNA diagnostics, such as reverse transcription PCR (RT-PCR), mainly rely on nucleic acid amplification (NAA) and RT processes, which are known to introduce substantial issues, including amplification bias, cross-contamination, and sample loss. To address these problems, we introduce a confinement effect-inspired Cas13a assay for single-molecule RNA diagnostics, eliminating the need for NAA and RT. This assay involves confining the RNA-triggered Cas13a catalysis system in cell-like-sized reactors to enhance local concentrations of target and reporter simultaneously, via droplet microfluidics. It achieves >10 000-fold enhancement in sensitivity when compared to the bulk Cas13a assay and enables absolute digital single-molecule RNA quantitation. We experimentally demonstrate its broad applicability for precisely counting microRNAs, 16S rRNAs, and SARS-CoV-2 RNA from synthetic sequences to clinical samples with excellent accuracy. Notably, this direct RNA diagnostic technology enables detecting a wide range of RNA molecules at the single-molecule level. Moreover, its simplicity, universality, and excellent quantification capability might render it to be a dominant rival to RT-qPCR.

Hybridizing clinical translatability with enzyme-free DNA signal amplifiers: recent advances in nucleic acid detection and imaging

Nucleic acids have become viable prognostic and diagnostic biomarkers for a diverse class of diseases, particularly cancer. However, the low femtomolar to attomolar concentration of nucleic acids in human samples require sensors with excellent detection capabilities; many past and current platforms fall short or are economically difficult. Strand-mediated signal amplifiers such as hybridization chain reaction (HCR) and catalytic hairpin assembly (CHA) are superior methods for detecting trace amounts of biomolecules because one target molecule triggers the continuous production of synthetic double-helical DNA. This cascade event is highly discriminatory to the target via sequence specificity, and it can be coupled with fluorescence, electrochemistry, magnetic moment, and electrochemiluminescence for signal reporting. Here, we review recent advances in enhancing the sensing abilities in HCR and CHA for improved live-cell imaging efficiency, lowered limit of detection, and optimized multiplexity. We further outline the potential for clinical translatability of HCR and CHA by summarizing progress in employing these two tools for in vivo imaging, human sample testing, and sensing-treating dualities. We finally discuss their future prospects and suggest clinically-relevant experiments to supplement further related research.

Simplified Digital Enzyme-Linked Immunosorbent Assay Using Tyramide Signal Amplification and Fibrin Hydrogels

Many protein biomarkers occur at very low concentrations in biofluids like blood and saliva, and ultrasensitive detection methods are required in order to measure them. Approaches such as digital enzyme-linked immunosorbent assays (ELISA) and single molecule arrays (Simoa) have been developed to accurately quantitate protein concentrations as low as attomolar levels. Although these techniques are being implemented in research and clinical laboratories to develop ultrasensitive clinical diagnostic assays, the size and cost of the instruments required to run these digital assays have precluded them from being implemented into point-of-care diagnostic formats. Here, we report the development of a simplified digital ELISA format that is more amenable to point-of-care technologies, referred to as catalyzed reporter deposition digital ELISA (CARD-dELISA). On-bead signal generation using the CARD tyramide signal amplification technique is combined with bead immobilization in fibrin hydrogels for single molecule counting in a simplified workflow format. CARD-dELISA allows for ultrasensitive protein detection (IL-6: ∼1 fM) with a dynamic range similar to the conventional Simoa assay. We use CARD-dELISA to measure IL-6 in saliva samples and show good agreement with conventional Simoa.

Ultrasensitive Detection of Enzymatic Activity Using Single Molecule Arrays

Enzyme assays are important for many applications including clinical diagnostics, functional proteomics, and drug discovery. Current methods for enzymatic activity measurement often suffer from low analytical sensitivity. We developed an ultrasensitive method for the detection of enzymatic activity using Single Molecule Arrays (eSimoa). The eSimoa assay is accomplished by conjugating substrates to paramagnetic beads and measuring the conversion of substrates to products using single molecule analysis. We demonstrated the eSimoa method for the detection of protein kinases, telomerase, histone H3 methyltransferase SET7/9, and polypeptide N-acetylgalactosaminyltransferase with unprecedented sensitivity. In addition, we tested enzyme inhibition and performed theoretical calculations for the binding of inhibitor to its target enzyme and show the need for an ultrasensitive enzymatic assay to evaluate the potency of tight binding inhibitors. The eSimoa assay was successfully used to determine inhibition constants of both bosutinib and dasatinib. Due to the ultrasensitivity of this method, we also were able to measure the kinase activities at the single cell level. We show that the eSimoa assay is a simple, fast, and highly sensitive approach, which can be easily extended to detect a variety of other enzymes, providing a promising platform for enzyme-related fundamental research and inhibitor screening.

Single Molecule Protein Detection with Attomolar Sensitivity Using Droplet Digital Enzyme-Linked Immunosorbent Assay

Many proteins are present at low concentrations in biological samples, and therefore, techniques for ultrasensitive protein detection are necessary. To overcome challenges with sensitivity, the digital enzyme-linked immunosorbent assay (ELISA) was developed, which is 1000× more sensitive than conventional ELISA and allows sub-femtomolar protein detection. However, this sensitivity is still not sufficient to measure many proteins in various biological samples, thereby limiting our ability to detect and discover biomarkers. To overcome this limitation, we developed droplet digital ELISA (ddELISA), a simple approach for detecting low protein levels using digital ELISA and droplet microfluidics. ddELISA achieves maximal sensitivity by improving the sampling efficiency and counting more target molecules. ddELISA can detect proteins in the low attomolar range and is up to 25-fold more sensitive than digital ELISA using Single Molecule Arrays (Simoa), the current gold standard tool for ultrasensitive protein detection. Using ddELISA, we measured the LINE1/ORF1 protein, a potential cancer biomarker that has not been previously measured in serum. Additionally, due to the simplicity of our device design, ddELISA is promising for point-of-care applications. Thus, ddELISA will facilitate the discovery of biomarkers that have never been measured before for various clinical applications.

A platform for multiplexed colorimetric microRNA detection using shape-encoded hydrogel particles

We report a platform utilizing a reporter enzyme, which produces a chromogenic indigo precipitate that preferentially localizes within a hydrogel microparticle. The 3D network of the hydrogel maintains the rapid target binding kinetics found in solution, while multiplexed target detection is achieved through shape-encoding of the particles. Moreover, the precipitate-laden hydrogels can be imaged with a simple phone camera setup. We used this system to detect microRNA (miRNA) down to 0.22 fmol. We then showed the compatibility of this system with real samples by performing multiplexed miRNA measurements from total RNA from matched colon cancer and normal adjacent tissue.

Simultaneous detection of small molecules, proteins and microRNAs using single molecule arrays

Biological samples such as blood, urine, cerebrospinal fluid and saliva contain a large variety of proteins, nucleic acids, and small molecules. These molecules can serve as potential biomarkers of disease and therefore, it is desirable to simultaneously detect multiple biomarkers in one sample. Current detection techniques suffer from various limitations including low analytical sensitivity and complex sample processing. In this work, we present an ultrasensitive method for simultaneous detection of small molecules, proteins and microRNAs using single molecule arrays (Simoa). Dye-encoded beads modified with specific capture probes were used to quantify each analyte. Multiplex competitive Simoa assays were established for simultaneous detection of cortisol and prostaglandin E2. In addition, competitive and sandwich immunoassays were combined with a direct nucleic acid hybridization assay for simultaneous detection of cortisol, interleukin 6 and microRNA 141. The multi-analyte Simoa assay shows high sensitivity and specificity, which provides a powerful tool for the analysis of many different samples.

Ultrasensitive Detection of Attomolar Protein Concentrations by Dropcast Single Molecule Assays

Measurements of very low levels of biomolecules, including proteins and nucleic acids, remain a critical challenge in many clinical diagnostic applications due to insufficient sensitivity. While digital measurement methods such as Single Molecule Arrays (Simoa), or digital ELISA, have made significant advances in sensitivity, there are still many potential disease biomarkers that exist in accessible biofluids at levels below the detection limits of these techniques. To overcome this barrier, we have developed a simple strategy for single molecule counting, dropcast single molecule assays (dSimoa), that enables more target molecules to be counted through increased sampling efficiency and with a simpler workflow. In this approach, beads are simply dropcast onto a microscope slide and dried into a monolayer film for digital signal readout. The dSimoa platform achieves attomolar limits of detection, with an up to 25-fold improvement in sensitivity over Simoa, the current state of the art for ultrasensitive protein detection. Furthermore, due to its simple readout process and improved cost-effectiveness compared to existing digital bioassays, dSimoa increases amenability to integration into point-of-care platforms. As an illustration of the potential utility of dSimoa, we demonstrate its ability to measure previously undetectable levels of Brachyury, a tissue biomarker for chordoma, in plasma samples. With its significantly enhanced sensitivity and simplicity, dSimoa can pave the way toward the discovery of new biomarkers for early disease diagnosis and improved health outcomes.