Immobilized stem-loop structured probes as conformational switches for enzymatic detection of microbial 16S rRNA

DNA nanotechnology for nucleic acid analysis: sensing of nucleic acids with DNA junction-probes

DNA nanotechnology deals with the design of non-naturally occurring DNA nanostructures that can be used in biotechnology, medicine, and diagnostics. In this study, we introduced a nucleic acid five-way junction (5WJ) structure for direct electrochemical analysis of full-length biological RNAs. To the best of our knowledge, this is the first report on the interrogation of such long nucleic acid sequences by hybridization probes attached to a solid support. A hairpin-shaped electrode-bound oligonucleotide hybridizes with three adaptor strands, one of which is labeled with methylene blue (MB). The four strands are combined into a 5WJ structure only in the presence of specific DNA or RNA analytes. Upon interrogation of a full-size 16S rRNA in the total RNA sample, the electrode-bound MB-labeled 5WJ association produces a higher signal-to-noise ratio than electrochemical nucleic acid biosensors of alternative design. This advantage was attributed to the favorable geometry on the 5WJ nanostructure formed on the electrode's surface. The 5WJ biosensor is a cost-efficient alternative to the traditional electrochemical biosensors for the analysis of nucleic acids due to the universal nature of both the electrode-bound and MB-labeled DNA components.

Construction of a point-of-care electrochemical biosensor for Escherichia coli 16S rRNA analysis based on MoS2 nanoprobes

Foodborne pathogens are harmful to human health because they can contaminate food and induce diseases. To efficiently distinguish and determine foodborne bacteria, an ultrasensitive point-of-care electrochemical biosensor was designed for 16S rRNA detection by coupling a signal amplification strategy with MoS2-based nanoprobes. Gold nanoparticles and thionine co-functionalized molybdenum disulfide (MoS2) nanocomposites (MoS2-Thi-AuNPs) were used to construct nanoprobes, which can efficiently monitor the detection process and amplify the detection signal. In the presence of Escherichia coli (E. coli) 16S rRNA, a classical sandwiched DNA structure was formed on the surface of a hierarchical flower-like gold nanostructure-decorated screen-printed carbon electrode (HFGN-SPCE), generating an obvious electrochemical signal from Thi. Under optimal conditions, this designed electrochemical biosensor showed a wide dynamic range (0-1.0 × 106 fM), low detection limit (2.8 fM), high selectivity and accepted stability for E. coli 16S rRNA detection in ideal buffers. Moreover, this biosensor can efficiently determine 16S rRNA in milk samples and 10 CFU mL-1 bacterial lysate. All experimental results suggested that this biosensor has a promising application in the detection of foodborne pathogens.

Development of a long noncoding RNA BC032469-dependent gold nanoparticle molecular beacon for the detection of gastric cancer cells

Aim: Long noncoding RNA (lncRNA) BC032469-dependent gold nanoparticle molecular beacons (AuNP-MB) were constructed for the detection of gastric cancer cells. Materials & methods: The AuNP-MBs were prepared according to well-established procedures based on the Au-S interaction between the gold lattice and thiol functionalized oligonucleotides. More importantly, the stability and targeting ability of AuNP-MB were verified by a series of in vitro and in vivo experiments. Results: The lncRNA-dependent probes were successfully utilized for AuNP-MB-based intracellular imaging, with fluorescence effectively emitted in GC cells, but not in normal cells. Notably, such fluorescent emission was positively correlated with lncRNA BC032469 expression. Conclusion: The authors developed an effective fluorescent imaging probe for the recognition of gastric cancer cells.

A versatile fluorometric in situ hybridization method for the quantitation of hairpin conformations in DNA self-assembled monolayers

As the performance of hairpin DNA (hpDNA)-based biosensors is highly dependent on the yield of stem-loop (hairpin) conformations, we report herein a versatile fluorometric in situ hybridization protocol for examining hpDNA self-assembled monolayers (SAMs) on popularly used biochip substrates. Specifically, the ratio of fluorescence (FL) intensities of hpDNA SAMs (in an array format) before and after hybridization was adopted as the key parameter for performing such a determination. Upon confirming the existence of mixed and tunable DNA conformations in binary deposition solutions and efficient hybridization of the hairpin strands with the target DNA via gel electrophoresis assays, we tested the fluorometric protocol for determining the coverages of hpDNA in hpDNA/ssDNA SAMs prepared on gold; its accuracy was validated by Exonuclease I (Exo I)-assisted electrochemical quantitation. To further confirm its versatility, this FL protocol was adopted for quantifying hairpin conformations formed on glass and polycarbonate (PC) substrates. The molar ratios of surface-tethered hairpin conformations on the three different substrates were all found to be proportional to but less than those in the binary deposition solutions, and were dependent on the substrate morphology. The findings reported herein are beneficial for the construction of highly efficient DNA hairpin-based sensing surfaces, which essentially facilitates the creation of hpDNA-based biosensors with optimal detection performance.

Evaluation of Rationally Designed Label-free Stem-loop DNA Probe Opening in the Presence of miR-21 by Circular Dichroism and Fluorescence Techniques

The characteristic features of stem-loop structured probes make them robust tools to detect targets with high sensitivity and selectivity. The basis of the hairpin based sensors operation is a conformational change that occurs upon hybridization of target with stem-loop probe. The design of the stem-loop probe has an important role in target recognition. Therefore, we designed a label-free stem loop probe for targeting miR-21 as a cancer biomarker investigated by web-based tools; its thermodynamic parameters obtained by thermal UV spectroscopy. The efficiency of stem-loop structure opening in the presence of target and non-target sequences was evaluated by fluorescence spectroscopy and circular dichroism spectro-polarimetry. The results showed that the target sequence opens the structure of hairpin efficiently in comparison to non-target sequences. To optimize the stem-loop hybridization to its target, the buffer ionic strength was changed by adding different concentrations of NaCl, KCl and MgCl₂. It was shown that buffering conditions have a significant role in loop structure opening and its optimization, led to an increase in sensitivity detection and have improved LOD from 60 pM to 45 pM.

A novel adenosine-based molecular beacon probe for room temperature nucleic acid rapid detection in cotton thread device

We used cotton thread as substrate to develop a novel room temperature DNA detection device for low-cost, sensitive and rapid detection of a human genetic disease, hereditary tyrosinemia type I related DNA sequences. A novel adenosine based molecular beacon (ABMB) probe modified on gold nanoparticle was used as reporter probe. In the presence of coralyne, a small molecule which can react with adenosines, the ABMB would form a hairpin structure just like traditional molecular beacon used extensively. In the presence of target DNA sequences, the hairpin structure of ABMB modified on gold nanoparticles will be opened and the biotin group modified at one end of the DNA probes will be released and react with the streptavidin immobilized on the test zone of the cotton thread. The response of the thread based DNA test device is linear over the range of 2.5-100 nM complementary DNA. The ability of our developed device for discriminating the single base mismatched DNA related to a human genetic disease, hereditary tyrosinemia type I, was improved comparing with previous report. It is worth mentioning that the whole assay procedure for DNA test is performed under room temperature which simplified the assay procedures greatly.

DNA molecular beacon-based plastic biochip: a versatile and sensitive scanometric detection platform

In this paper, we report a novel DNA molecular beacon (MB)-based plastic biochip platform for scanometric detection of a range of analytical targets. Hairpin DNA strands, which are dually modified with amino and biotin groups at their two ends are immobilized on a disposable plastic (polycarbonate) substrate as recognition element and gold nanoparticle-assisted silver-staining as signal reading protocol. Initially, the immobilized DNA probes are in their folded forms; upon target binding the hairpin secondary structure of the probe strand is "forced" open (i.e., converted to the unfolded state). Nanogold-streptavidin conjugates can then bind the terminal biotin groups and promote the deposition of rather large silver particles which can be either directly visualized or quantified with a standard flatbed scanner. We demonstrate that with properly designed probe sequences and optimized preparation conditions, a range of molecular targets, such as DNA strands, proteins (thrombin) and heavy metal ions (Hg(2+)), can be detected with high sensitivity and excellent selectivity. The detection can be done in both standard physiological buffers and real world samples. This constitutes a platform technology for performing rapid, sensitive, cost-effective, and point-of-care (POC) chemical analysis and medical diagnosis.

Multilayer graphene-gold nanocomposite modified stem-loop DNA biosensor for peanut allergen-Ara h1 detection

In this study, we developed an electrochemically-amplified, stem-loop DNA biosensor to detect the peanut allergen Ara h1. Specifically, we electrodeposited a multilayer graphene-gold nanocomposite onto a glassy carbon electrode and then immobilised a thiolated hairpin DNA-biotin probe onto the modified electrode surface. The multilayer graphene-gold composite has good dispersion ability, and can amplify the electrochemical signal due to its high electron-transfer efficiency. The probe was switched to an "off" state in the presence of target DNA. The prepared biosensor demonstrated a linear response ranging from 10(-16) to 10(-13)M, with an ultrasensitive detection limit of 0.041 fM. Moreover, the biosensor showed excellent selectivity, as well as the ability to discriminate between a complementary target and a one-base mismatch or non-complementary sequence. Results show that this prepared DNA biosensor can be successfully used to detect the peanut allergen Ara h1 in a peanut milk beverage. Findings can be applied to the prevention of allergic reactions, thus improving human health and safety.

Enzymatic amplification detection of peanut allergen Ara h1 using a stem-loop DNA biosensor modified with a chitosan-mutiwalled carbon nanotube nanocomposite and spongy gold film

In this paper, a highly sensitive biosensor was constructed for peanut allergen Ara h1 detection. The biosensor was constructed by coating a glassy carbon electrode with a chitosan-mutiwalled carbon nanotube nanocomposite and then adding a spongy gold film via electro-deposition to increase the effective area. The probe switched from an "on" to an "off" state in the presence of target DNA, which detached biotin from the electrode surface. This also detached streptavidin-horseradish peroxidase (HRP-SA), which was bound to the electrode via specific interaction with biotin. The HRP-SA catalyzed chemical oxidation of hydroquinone by H2O2 to form benzoquinone, and when it was detached, electrochemical reduction of the signal of benzoquinone could be used to monitor DNA hybridization via chronoamperometry. Under optimum conditions, a wide dynamic detection range (3.91 × 10(-17)-1.25 × 10(-15) mol L(-1)) and a low detection limit (1.3 × 10(-17) mol L(-1)) were achieved for the complementary sequence. Furthermore, the DNA biosensor exhibited an excellent ability to discriminate between a complementary target and a one-base mismatch or non-complementary sequence. The sensor was successfully applied to Ara h1 analysis in peanuts.

Sub-femtomole detection of 16s rRNA from Legionella pneumophila using surface plasmon resonance imaging

Legionellosis has been and continues to be a life-threatening disease worldwide, even in developed countries. Given the severity and unpredictability of Legionellosis outbreaks, developing a rapid, highly specific, and sensitive detection method is thus of great pertinence. In this paper, we demonstrate that sub-femtomole levels of 16s rRNA from pathogenic Legionella pneumophila can be timely and effectively detected using an appropriate designed capture, detector probes, and a QD SPRi signal amplification strategy. To achieve specific and sensitive detection, optimal hybridization conditions and parameters were implemented. Among these parameters, fragmentation of the 16s rRNA and further signal amplification by QDs were found to be the main parameters contributing to signal enhancement. The appropriate design of the detector probes also increased the sensitivity of the detection system, mainly due to secondary structure of 16s rRNA. The use of 16s rRNA from L. pneumophila allowed for the detection of metabolically active pathogens with high sensitivity. Detection of 16s rRNA in solutions as diluted as 1 pM at 450 μL (0.45 femtomole) was achieved in less than 3h, making our approach suitable for the direct, timely, and effective detection of L. pneumophila within man-made water systems.

'Phytochip': on-chip detection of phytopathogenic RNA viruses by a new surface plasmon resonance platform

The surface plasmon resonance (SPR) based 'Phytochip' was developed to distinguish virus-infected plants from non-infected plants. The system detects DNA-RNA hybridization to show the presence of phytopathogenic viruses such as the RNA virus barley stripe mosaic virus (BSMV) in wheat leaves. To achieve this BSMV and wheat specific oligonucleotides, and a negative control yeast oligonucleotide, were immobilized on a SPR gold surface chip. After optimization of the hybridization parameters with purified wheat samples, wheat infected with BSMV resulted in detectable signals with both the BSMV and the wheat probes. In contrast, a hybridization reaction was not be detected with the negative probe. The method is fast and sensitive with a detection time of 3000s (50min), a detection limit of 14.7pgμl(-1) BSMV RNA and a measuring range of 14.7-84pgμl(-1) BSMV RNA (1.323-7.56ng BSMV RNA per 90μl sample). These characteristics, combined with the high throughput design, make it suitable for application in plant breeding and virus control.

An electronic channel switching-based aptasensor for ultrasensitive protein detection

Due to the ubiquity and essential of the proteins in all living organisms, the identification and quantification of disease-specific proteins are particularly important. Because the conformational change of aptamer upon its target or probe/target/probe sandwich often is the primary prerequisite for the design of an electrochemical aptameric assay system, it is extremely difficult to construct the electrochemical aptasensor for protein assay because the corresponding aptamers cannot often meet the requirement. To circumvent the obstacles mentioned, an electronic channel switching-based (ECS) aptasensor for ultrasensitive protein detection is developed. The essential achievement made is that an innovative sensing concept is proposed: the hairpin structure of aptamer is designed to pull electroactive species toward electrode surface and makes the surface-immobilized IgE serve as a barrier that separates enzyme from its substrate. It seemingly ensures that the ECS aptasensor exhibits most excellent assay features, such as, a detection limit of 4.44×10(-6)μg mL(-1) (22.7fM, 220zmol in 10-μL sample) (demonstrating a 5 orders of magnitude improvement in detection sensitivity compared with classical electronic aptasensors) and dynamic response range from 4.44×10(-6) to 4.44×10(-1)μg mL(-1). We believe that the described sensing concept here might open a new avenue for the detection of proteins and other biomacromolecules.

Ultrasensitive cDNA detection of dengue virus RNA using electrochemical nanoporous membrane-based biosensor

A nanoporous alumina membrane-based ultrasensitive DNA biosensor is constructed using 5′-aminated DNA probes immobilized onto the alumina channel walls. Alumina nanoporous membrane-like structure is carved over platinum wire electrode of 76 µm diameter dimension by electrochemical anodization. The hybridization of complementary target DNA with probe DNA molecules attached inside the pores influences the pore size and ionic conductivity. The biosensor demonstrates linear range over 6 order of magnitude with ultrasensitive detection limit of 9.55×10⁻¹² M for the quantification of ss-31 mer DNA sequence. Its applicability is challenged against real time cDNA PCR sample of dengue virus serotype1 derived from asymmetric PCR. Excellent specificity down to one nucleotide mismatch in target DNA sample of DENV3 is also demonstrated.

Electrochemically amplified molecular beacon biosensor for ultrasensitive DNA sequence-specific detection of Legionella sp

An electrochemically amplified molecular beacon (EAMB) biosensor is constructed using thiolated hairpin DNA-ferrocene probes on gold electrode. The switching from "on" to "off" states of individual probes in the presence of complementary DNA target influences the electrode potential, besides the current, owing to changes in surface density of the electroactive hairpin DNA-ferrocene probes. The EAMB biosensor demonstrates linear range over 8 orders of magnitude with ultrasensitive detection limit of 2.3 × 10(-14)M for the quantification of a 21-mer DNA sequence. Its applicability is tested against PCR amplicons derived from genomic DNA of live Legionella pneumophila. Excellent specificity down to one and three nucleotides mismatches in another strain of L. pneumophila and a different bacterium species, respectively, is demonstrated.

Hydroxylamine-amplified gold nanoparticles for the homogeneous detection of sequence-specific DNA

Herein, we report the development of a simple, sensitive, inexpensive, and homogeneous detection method for the analysis of DNA hybridization based on the optical properties of hydroxylamine-amplified gold nanoparticles (Au NPs) in solution phase. The assay relies on a sandwich-type DNA hybridization in which DNA targets are first hybridized with capture DNA probes immobilized on the surface of magnetic beads and then sandwiched with Au NPs modified with biotinylated reporter DNA. Au NPs, after being anchored on the magnetic beads, are then dispersed in solution by the dehybridization and enlarged by using a mixture of HAuCl(4) and NH(2)OH. The Au NP growth signal which is used for the quantitative analysis of sequence-specific DNA can be easily monitored by the naked eye directly or an UV-vis spectrophotometer. Surface plasmonic signature of the enlarged Au NPs and the kinetics of the Au NP growth in the homogenous phase containing of HAuCl(4) and NH(2)OH have also been studied. As a result, such a homogeneous assay allows the detection of 30-base DNA targets down to the 100 amol level, which offers great promise for facilitating sensitive detection of other biorecognition events.

Quantitation of non-amplified genomic DNA by bead-based hybridization and template mediated extension coupled to alkaline phosphatase signal amplification

Klenow I polymerase activity was combined with solid phase DNA hybridization to detect non-amplified genomic DNA (gDNA) sequences from Escherichia coli. Aminopropyl-controlled pore glass surface-bound oligonucleotides were hybridized to fragmented gDNA. The template-mediated extension at the 3'-terminus of the immobilized probe was then promoted in the presence of Klenow I polymerase and digoxigenin-labeled nucleotides. Detection of the extended probes was accomplished with an anti-digoxigenin alkaline phosphatase conjugate protocol coupled to colorimetric or fluorescent detection. Using the colorimetric protocol, the proof-of-concept was established. The fluorescence-based methodology, on the other hand, provided the basis for a quantitative interpretation of the data, affording a detection limit of 5 pM gDNA.

Chemiluminescence platforms in immunoassay and DNA analyses

Chemiluminescent (CL) detection techniques for DNA assays and immunoassays have become very popular in recent years. This review discusses recent advances in those CL assays that have occurred over the last few years. In the monoplex assay section, different classes of CL labels including nanoparticle, DNAzyme, acridinium ester, enzyme and luminol-based CL assays are reviewed concerning the detection of DNAs and proteins. In the multiplex assay section, both spatial resolution and substrate zone-resolved techniques are discussed.

Molecular engineering of DNA: molecular beacons

Molecular beacons (MBs) are specifically designed DNA hairpin structures that are widely used as fluorescent probes. Applications of MBs range from genetic screening, biosensor development, biochip construction, and the detection of single-nucleotide polymorphisms to mRNA monitoring in living cells. The inherent signal-transduction mechanism of MBs enables the analysis of target oligonucleotides without the separation of unbound probes. The MB stem-loop structure holds the fluorescence-donor and fluorescence-acceptor moieties in close proximity to one another, which results in resonant energy transfer. A spontaneous conformation change occurs upon hybridization to separate the two moieties and restore the fluorescence of the donor. Recent research has focused on the improvement of probe composition, intracellular gene quantitation, protein-DNA interaction studies, and protein recognition.

Quantitative rRNA-targeted solution-based hybridization assay using peptide nucleic acid molecular beacons

The potential of a solution-based hybridization assay using peptide nucleic acid (PNA) molecular beacon (MB) probes to quantify 16S rRNA of specific populations in RNA extracts of environmental samples was evaluated by designing PNA MB probes for the genera Dechloromonas and Dechlorosoma. In a kinetic study with 16S rRNA from pure cultures, the hybridization of PNA MB to target 16S rRNA exhibited a higher final hybridization signal and a lower apparent rate constant than the hybridizations to nontarget 16S rRNAs. A concentration of 10 mM NaCl in the hybridization buffer was found to be optimal for maximizing the difference between final hybridization signals from target and nontarget 16S rRNAs. Hybridization temperatures and formamide concentrations in hybridization buffers were optimized to minimize signals from hybridizations of PNA MB to nontarget 16S rRNAs. The detection limit of the PNA MB hybridization assay was determined to be 1.6 nM of 16S rRNA. To establish proof for the application of PNA MB hybridization assays in complex systems, target 16S rRNA from Dechlorosoma suillum was spiked at different levels to RNA isolated from an environmental (bioreactor) sample, and the PNA MB assay enabled effective quantification of the D. suillum RNA in this complex mixture. For another environmental sample, the quantitative results from the PNA MB hybridization assay were compared with those from clone libraries.

An enzyme-based E-DNA sensor for sequence-specific detection of femtomolar DNA targets

In this work, we report an enzyme-based E-DNA sensor for the sequence-specific detection of nucleic acids. This DNA sensor employs a "stem-loop" DNA probe dually labeled with biotin and digoxigenin (DIG). The probe is immobilized at an avidin-modified electrode surface via the biotin-avidin bridge, and the DIG serves as an affinity tag for the enzyme binding. In the initial state of the sensor, the probe adopts the stem-loop structure, which shields DIG from being approached by a bulky horseradish peroxidase-linked-anti-DIG antibody (anti-DIG-HRP) due to the steric effect. After hybridization, the probe undergoes a significant conformational change, forcing DIG away from the electrode. As a result, the DIG label becomes accessible by the anti-DIG-HRP, and the target hybridization event can be sensitively transduced via the enzymatically amplified electrochemical current signal. By using this new strategy, we demonstrate that the prototype E-DNA sensor has been able to detect as low as femtomolar DNA targets with excellent differentiation ability for even single mismatches.

Using force spectroscopy analysis to improve the properties of the hairpin probe

The sensitivity of hairpin-probe-based fluorescence resonance energy transfer (FRET) analysis was sequence-dependent in detecting single base mismatches with different positions and identities. In this paper, the relationship between the sequence-dependent effect and the discrimination sensitivity of a single base mismatch was systematically investigated by fluorescence analysis and force spectroscopy analysis. The same hairpin probe was used. The uneven fluorescence analysis sensitivity was obviously influenced by the guanine-cytosine (GC) contents as well as the location of the mismatched base. However, we found that force spectroscopy analysis distinguished itself, displaying a high and even sensitivity in detecting differently mismatched targets. This could therefore be an alternative and novel way to minimize the sequence-dependent effect of the hairpin probe. The advantage offered by force spectroscopy analysis could mainly be attributed to the percentage of rupture force reduction, which could be directly and dramatically influenced by the percentage of secondary structure disruption contributed by each mismatched base pair, regardless of its location and identity. This yes-or-no detection mechanism should both contribute to a comprehensive understanding of the sensitivity source of different mutation analyses and extend the application range of hairpin probes.

DNA nanoswitch as a biosensor

We present a new type of DNA switch, based on the Holliday junction, that uses a combination of binding and conformational switching to enable specific label-free detection of DNA and RNA. We show that a single RNA oligonucleotide species can be detected in a complex mixture of extracted cellular RNA and demonstrate that by exploiting different aspects of the switch characteristics we can achieve 30-fold discrimination between single-nucleotide mismatches in a DNA oligonucleotide.

Hairpin-DNA Probe for Enzyme-Amplified Electrochemical Detection of Legionella pneumophila

An electrochemical genosensor for the detection of nucleic acid sequences specific of Legionella pneumophila is reported. An immobilized thiolated hairpin probe is combined with a sandwich-type hybridization assay, using biotin as a tracer in the signaling probe, and streptavidin-alkaline phosphatase as reporter molecule. The activity of the immobilized enzyme was voltammetrically determined by measuring the amount of 1-naphthol generated after 2 min of enzymatic dephosphorylation of 1-naphthyl phosphate. The sensor allows discrimination between L. pneumophila and L. longbeachae with high sensitivity under identical assay conditions (no changes in stringency). A limit of detection of 340 pM L. pneumophila DNA, and a linear relationship between the analytical signal and the logarithm of the target concentration to 2 muM were obtained. Experimental results show the superior sensitivity and selectivity of the hairpin-based assay when compared with analogous sandwich-type assays using linear capture probes.

Molecular beacons as probes of RNA unfolding under native conditions

Hybridization of fluorescent molecular beacons provides real-time detection of RNA secondary structure with high specificity. We used molecular beacons to measure folding and unfolding rates of the Tetrahymena group I ribozyme under native conditions. A molecular beacon targeted against 15 nt in the 5' strand of the P3 helix specifically hybridized with misfolded forms of the ribozyme, without invading the native tertiary structure. The beacon associated with the misfolded ribozyme 300 times more slowly than with an unstructured oligonucleotide containing the same target sequence, suggesting that the misfolded ribozyme core remains structured in the absence of Mg2+. The rate of beacon hybridization under native conditions revealed a linear relationship between the free energy of unfolding and Mg2+ concentration. A small fraction of the RNA population unfolded very rapidly, suggesting parallel unfolding in one step or through misfolded intermediates.