Crystal structure of Bacillus stearothermophilus alpha-amylase: possible factors determining the thermostability

Cold-Active Starch-Degrading Enzymes from a Cold and Alkaline Greenland Environment: Role of Ca2+ Ions and Conformational Dynamics in Psychrophilicity

Cold-active enzymes hold promise for energy-efficient processes. Amylases are widely used in household and industrial applications, but only a few are cold-active. Here we describe three novel secreted amylases, Rho13, Ika2 and I3C6, all from bacteria growing in the cold and alkaline ikaite columns in Greenland. They all hydrolyzed starch to smaller malto-oligomers, but only Rho13 and Ika2 hydrolyzed cyclodextrins, and only Ika2 displayed transglycosylation activity. Ika2 forms a stable dimer, while both Rho13 and I3C6 are mainly monomeric. They all have optimal active temperatures around 30-35 °C and significant enzymatic activity below 20 °C, but Rho13 and I3C6 had an alkaline optimal pH, while Ika2 was markedly acidophilic. They showed complex dependence on Ca2+ concentration, with the activity of Rho13 and I3C6 following a bell-shaped curve and Ika2 being unaffected; however, removal of Ca2+ reduced the stability of all three enzymes. Loss of structure occurred well above the temperature of optimal activity, showing the characteristic psychrophilic divorce between activity and stability. MD simulations showed that Ika2 did not have a well-defined Ca2+ binding site, while Rho13 and I3C6 both maintained one stably bound Ca2+ ion. We identified psychrophilic features as higher levels of backbone fluctuations compared to mesophilic counterparts, based on a lower number of internal hydrogen bonds and salt bridges. This increased fluctuation was also found in regions outside the active site and may provide easier substrate access and accommodation, as well as faster barrier transitions. Our work sheds further light on the many ways in which psychrophilic enzymes adapt to increased catalysis at lower temperatures.

Exploring the antidiabetic and anti-inflammatory potential of Lavandula officinalis essential oil: In vitro and in silico insights

Medicinal plants have been utilized for centuries in traditional medicine systems worldwide, providing a rich source of bioactive compounds with diverse biological activities. Lavandula officinalis, a member of the Lamiaceae family, has been recognized for its multifaceted pharmacological activities. In this current investigation, our primary objective was to scrutinize the in vitro inhibitory potential of L. officinalis essential oil (LOEO) against alpha-amylase and alpha-glucosidase, with the aim of understanding its antidiabetic effects. Additionally, the assay encompassed tyrosinase and lipoxygenase (LOX) to assess its anti-inflammatory attributes. Unraveling the underlying molecular mechanisms of these activities prompted an in-silico study. The purpose was to establish correlations between in-vitro observations and computational insights derived from molecular docking, which forecasts the interaction of LOEO molecules with their respective targets, alongside ADMET prediction. The Gas Chromatography-Mass Spectrometry (GC-MS) analysis allow to identify eighteen compounds, with the dominance of L-camphor (43.12 %), 1,8-cineole (34.27 %) and borneol (8.60 %) in LOEO. The antidiabetic evaluation revealed that LOEO exhibited noteworthy inhibitory activity against both α-amylase and α-glucosidase, displaying IC50 values of 3.14 ± 0.05 mg/mL and 2.07 ± 0.03 mg/mL, respectively. The subsequent in-silico study highlighted the particularly strong binding affinity of (E)-Farnesene, with a binding score of -7.4 kcal/mol for alpha-glucosidase, while Germacrene D displayed the highest affinity among the ligands (-7.9 kcal/mol) for the alpha-amylase target. Furthermore, the investigation into in vitro anti-inflammatory activity unveiled LOEO efficacy against tyrosinase (IC50 = 42.74 μg/mL) and LOX (IC50 = 11.58 ± 0.07 μg/mL). The in-silico analysis echoed these findings, indicating α-Cadinene's notable binding affinity of 6 kcal/mol with tyrosinase and α-Cedrene's binding score of -6.5 kcal/mol for LOX. Impressively, for both COX-1 and COX-2, α-Cedrene exhibited significant binding affinities of -7.6 and -7.3 kcal/mol, respectively. The convergence between the in vitro and in silico outcomes underscores the potential of LOEO and its constituent compounds as potent inhibitors targeting both diabetes and the inflammatory processes.

Exploring a novel GH13_5 α-amylase from Jeotgalibacillus malaysiensis D5T for raw starch hydrolysis

α-Amylase plays a crucial role in the industrial degradation of starch. The genus Jeotgalibacillus of the underexplored marine bacteria family Caryophanaceae has not been investigated in terms of α-amylase production. Herein, we report the comprehensive analysis of an α-amylase (AmyJM) from Jeotgalibacillus malaysiensis D5T (= DSM28777T = KCTC33550T). Protein phylogenetic analysis indicated that AmyJM belongs to glycoside hydrolase family 13 subfamily 5 (GH13_5) and exhibits low sequence identity with known α-amylases, with its closest counterpart being the GH13_5 α-amylase from Bacillus sp. KSM-K38 (51.05% identity). Purified AmyJM (molecular mass of 70 kDa) is stable at a pH range of 5.5-9.0 and optimally active at pH 7.5. The optimum temperature for AmyJM is 40 °C, where the enzyme is reasonably stable at this temperature. Similar to other α-amylases, the presence of CaCl2 enhanced both the activity and stability of AmyJM. AmyJM exhibited activity toward raw and gelatinized forms of starches and related α-glucans, generating a mixture of reducing sugars, such as glucose, maltose, maltotriose, maltotetraose, and maltopentaose. In raw starch hydrolysis, AmyJM exhibited its highest efficiency (51.10% degradation) in hydrolyzing raw wheat starch after 3-h incubation at 40 °C. Under the same conditions, AmyJM also hydrolyzed tapioca, sago, potato, rice, and corn raw starches, yielding 16.01-30.05%. These findings highlight the potential of AmyJM as a biocatalyst for the saccharification of raw starches, particularly those derived from wheat.

Detergent-resistant α-amylase derived from Anoxybacillus karvacharensis K1 and its production based on whey

In the field of biotechnology, the utilization of agro-industrial waste for generating high-value products, such as microbial biomass and enzymes, holds significant importance. This study aimed to produce recombinant α-amylase from Anoxybacillus karvacharensis strain K1, utilizing whey as an useful growth medium. The purified hexahistidine-tagged α-amylase exhibited remarkable homogeneity, boasting a specific activity of 1069.2 U mg-1. The enzyme displayed its peak activity at 55 °C and pH 6.5, retaining approximately 70% of its activity even after 3 h of incubation at 55 °C. Its molecular weight, as determined via SDS-PAGE, was approximately 69 kDa. The α-amylase demonstrated high activity against wheat starch (1648.8 ± 16.8 U mg-1) while exhibiting comparatively lower activity towards cyclodextrins and amylose (≤ 200.2 ± 16.2 U mg-1). It exhibited exceptional tolerance to salt, withstanding concentrations of up to 2.5 M. Interestingly, metal ions and detergents such as sodium dodecyl sulfate (SDS), Triton 100, Triton 40, and Tween 80, 5,5'-dithio-bis-[2-nitrobenzoic acid (DNTB), β-mercaptoethanol (ME), and dithiothreitol (DTT) had no significant inhibitory effect on the enzyme's activity, and the presence of CaCl2 (2 mM) even led to a slight activation of the recombinant enzyme (1.4 times). The Michaelis constant (Km) and maximum reaction rate (Vmax), were determined using soluble starch as a substrate, yielding values of 1.2 ± 0.19 mg mL-1 and 1580.3 ± 183.7 μmol mg-1 protein min-1, respectively. Notably, the most favorable conditions for biomass and recombinant α-amylase production were achieved through the treatment of acid whey with β-glucosidase for 24 h.

Structure-based modification of a-amylase by conventional and emerging technologies: Comparative study on the secondary structure, activity, thermal stability and amylolysis efficiency

α-Amylase is an endo-enzyme that catalyzes the hydrolysis of starch into shorter oligosaccharides. α-Amylase plays a crucial role in various industries. Manipulated α-amylases are of particular interest due to their remarkable amylolysis efficiency and thermostability for large-scale biotechnological processes. The retained catalytic activity of enzymes is decreased according to extreme pH, temperature, pressure, and chemical reagents. Broad industrial applications of α-amylases need special properties such as stability against temperature, pH, and chelators, and also attain reusability, desirable enzymatic activity, efficiency, and selectivity. Considering the biotechnological importance of α-amylase, its high stability is the most critical challenge for its economic viability. Therefore, improving its functionality and stability recently gained much interest. To achieve this purpose, various emerging technologies in combination with conventional methods on α-Amylases with different sources have been conducted. The present review is an attempt to summarize the effect of various conventional methods and emerging technologies employed to date on α-amylase secondary structure, thermal stability, and performance.

Modifying the amino acids in conformational motion pathway of the α-amylase of Geobacillus stearothermophilus improved its activity and stability

Amino acids along the conformational motion pathway of the enzyme molecule correlated to its flexibility and rigidity. To enhance the enzyme activity and thermal stability, the motion pathway of Geobacillus stearothermophilus α-amylase has been identified and molecularly modified by using the neural relational inference model and deep learning tool. The significant differences in substrate specificity, enzymatic kinetics, optimal temperature, and thermal stability were observed among the mutants with modified amino acids along the pathway. Mutants especially the P44E demonstrated enhanced hydrolytic activity and catalytic efficiency (kcat/KM) than the wild-type enzyme to 95.0% and 93.8% respectively, with the optimum temperature increased to 90°C. This mutation from proline to glutamic acid has increased the number and the radius of the bottleneck of the channels, which might facilitate transporting large starch substrates into the enzyme. The mutation could also optimize the hydrogen bonding network of the catalytic center, and diminish the spatial hindering to the substrate entry and exit from the catalytic center.

The novel amylase function of the carboxyl terminal domain of Amy63

α-amylase plays a crucial role in regulating metabolism and health by hydrolyzing of starch and glycogen. Despite comprehensive studies of this classic enzyme spanning over a century, the function of its carboxyl terminal domain (CTD) with a conserved eight β-strands is still not fully understood. Amy63, identified from a marine bacterium, was reported as a novel multifunctional enzyme with amylase, agarase and carrageenase activities. In this study, the crystal structure of Amy63 was determined at 1.8 Å resolution, revealing high conservation with some other amylases. Interestingly, the independent amylase activity of the carboxyl terminal domain of Amy63 (Amy63_CTD) was newly discovered by the plate-based assay and mass spectrometry. To date, the Amy63_CTD alone could be regarded as the smallest amylase subunit. Moreover, the significant amylase activity of Amy63_CTD was measured over a wide range of temperature and pH, with optimal activity at 60 °C and pH 7.5. The Small-angle X-ray scattering (SAXS) data showed that the high-order oligomeric assembly gradually formed with increasing concentration of Amy63_CTD, implying the novel catalytic mechanism as revealed by the assembly structure. Therefore, the discovery of the novel independent amylase activity of Amy63_CTD suggests a possible missing step or a new perspective in the complex catalytic process of Amy63 and other related α-amylases. This work may shed light on the design of nanozymes to process marine polysaccharides efficiently.

Improving thermostability of Bacillus amyloliquefaciens alpha-amylase by multipoint mutations

The medium-temperature alpha-amylase of Bacillus amyloliquefaciens is widely used in the food and washing process. Enhancing the thermostability of alpha-amylases and investigating the mechanism of stability are important for enzyme industry development. The optimal temperature and pH of the wild-type BAA and mutant MuBAA (D28E/V118A/S187D/K370 N) were all 60 °C and 6.0, respectively. The mutant MuBAA showed better thermostability at 50 °C and 60 °C, with a specific activity of 206.61 U/mg, which was 99.1% greater than that of the wild-type. By analyzing predicted structures, the improving thermostability of the mutant MuBAA was mainly related to enhanced stabilization of a loop region in domain B via more calcium-binding sites and intramolecular interactions around Asp187. Furthermore, additional intramolecular interactions around sites 28 and 370 in domain A were also beneficial for improving thermostability. Additionally, the decrease of steric hindrance at the active cavity increased the specific activity of the mutant MuBAA. Improving the thermostability of BAA has theoretical reference values for the modification of alpha-amylases.

Structural and functional adaptation in extremophilic microbial α-amylases

Maintaining stable native conformation of a protein under a given ecological condition is the prerequisite for survival of organisms. Extremophilic bacteria and archaea have evolved to adapt under extreme conditions of temperature, pH, salt, and pressure. Molecular adaptations of proteins under these conditions are essential for their survival. These organisms have the capability to maintain stable, native conformations of proteins under extreme conditions. The enzymes produced by the extremophiles are also known as extremozyme, which are used in several industries. Stability and functionality of extremozymes under varying temperature, pH, and solvent conditions are the most desirable requirement of industry. α-Amylase is one of the most important enzymes used in food, pharmaceutical, textile, and detergent industries. This enzyme is produced by diverse microorganisms including various extremophiles. Therefore, understanding its stability is important from fundamental as well as an applied point of view. Each class of extremophiles has a distinctive set of dominant non-covalent interactions which are important for their stability. Static information obtained by comparative analysis of amino acid sequence and atomic resolution structure provides information on the prevalence of particular amino acids or a group of non-covalent interactions. Protein folding studies give the information about thermodynamic and kinetic stability in order to understand dynamic aspect of molecular adaptations. In this review, we have summarized information on amino acid sequence, structure, stability, and adaptability of α-amylases from different classes of extremophiles.

Citrus Flavanone Narirutin, In Vitro and In Silico Mechanistic Antidiabetic Potential

Citrus fruits and juices have been studied extensively for their potential involvement in the prevention of various diseases. Flavanones, the characteristic polyphenols of citrus species, are the primarily compounds responsible for these studied health benefits. Using in silico and in vitro methods, we are exploring the possible antidiabetic action of narirutin, a flavanone family member. The goal of the in silico research was to anticipate how narirutin would interact with eight distinct receptors implicated in diabetes control and complications, namely, dipeptidyl-peptidase 4 (DPP4), protein tyrosine phosphatase 1B (PTP1B), free fatty acid receptor 1 (FFAR1), aldose reductase (AldR), glycogen phosphorylase (GP), alpha-amylase (AAM), peroxisome proliferator-activated receptor gamma (PPAR-γ), alpha-glucosidase (AGL), while the in vitro study looked into narirutin’s possible inhibitory impact on alpha-amylase and alpha-glucosidase. The results indicate that the studied citrus flavanone interacted remarkably with most of the receptors and had an excellent inhibitory activity during the in vitro tests suggesting its potent role among the different constituent of the citrus compounds in the management of diabetes and also its complications.

Less Unfavorable Salt Bridges on the Enzyme Surface Result in More Organic Cosolvent Resistance

Biocatalysis for the synthesis of fine chemicals is highly attractive but usually requires organic (co-)solvents (OSs). However, native enzymes often have low activity and resistance in OSs and at elevated temperatures. Herein, we report a smart salt bridge design strategy for simultaneously improving OS resistance and thermostability of the model enzyme, Bacillus subtilits Lipase A (BSLA). We combined comprehensive experimental studies of 3450 BSLA variants and molecular dynamics simulations of 36 systems. Iterative recombination of four beneficial substitutions yielded superior resistant variants with up to 7.6-fold (D64K/D144K) improved resistance toward three OSs while exhibiting significant thermostability (thermal resistance up to 137-fold, and half-life up to 3.3-fold). Molecular dynamics simulations revealed that locally refined flexibility and strengthened hydration jointly govern the highly increased resistance in OSs and at 50-100 °C. The salt bridge redesign provides protein engineers with a powerful and likely general approach to design OSs- and/or thermal-resistant lipases and other α/β-hydrolases.

Insight into Gentisic Acid Antidiabetic Potential Using In Vitro and In Silico Approaches

Numerous scientific studies have confirmed the beneficial therapeutic effects of phenolic acids. Among them gentisic acid (GA), a phenolic acid extensively found in many fruit and vegetables has been associated with an enormous confirmed health benefit. The present study aims to evaluate the antidiabetic potential of gentisic acid and highlight its mechanisms of action following in silico and in vitro approaches. The in silico study was intended to predict the interaction of GA with eight different receptors highly involved in the management and complications of diabetes (dipeptidyl-peptidase 4 (DPP4), protein tyrosine phosphatase 1B (PTP1B), free fatty acid receptor 1 (FFAR1), aldose reductase (AldR), glycogen phosphorylase (GP), α-amylase, peroxisome proliferator-activated receptor gamma (PPAR-γ) and α-glucosidase), while the in vitro study studied the potential inhibitory effect of GA against α-amylase and α-glucosidase. The results indicate that GA interacted moderately with most of the receptors and had a moderate inhibitory activity during the in vitro tests. The study therefore encourages further in vivo studies to confirm the given results.

Acid stable α-amylase from Pseudomonas balearica VITPS19-Production, purification and characterization

•

α – Amylase was produced from a rhizobacteria Pseudomonas balearica VITPS19.

•

One factor at a time method (OFAT) was employed to optimize the α –amylase production.

•

Three step purification of α – amylase from the fermentation broth.

•

Determining the optimal conditions for enzyme activity.

•

Estimation of the enzymatic kinetic parameters of the α-amylase.

In the present study, α-amylase from Pseudomonas balearica VITPS19 isolated from Kolathur, Tamil Nadu, India was studied. Initially, one factor at a time (OFAT) approach was used to optimize the medium parameters like pH, temperature, carbon and nitrogen sources and the presence of metal ions to enhance the amylase activity. After the optimization, 6.5-fold increase in the enzyme production was observed. Enzyme purification was carried out in three stages. The molecular weight of purified α-amylase was estimated to be 47 kDa.The optimum activity for the purified enzyme was observed at pH 6 in 0.1 M phosphate buffer at 25 ± 2 °C and the activity is enhanced in the presence of ions like Mn²⁺, Mo⁶⁺, Na⁺, Mg²⁺and Zn²⁺ and was inhibited in the presence of Hg²⁺ ions. Compounds such as Sodium dodecyl sulfate (SDS), Ethylenediaminetetraacetic acid (EDTA), urea and β- mercaptoethanol reduced the amylase activity. The K_m and V_max of the α-amylase was estimated to be 45.23 mM and 20.83 U/mL, respectively.

Characterization of the starch surface binding site on Bacillus paralicheniformis α-amylase

α-Amylase from Bacillus paralicheniformis (BliAmy), belonging to GH13_5 subfamily of glycoside hydrolases, was proven to be a highly efficient raw starch digesting enzyme. The ability of some α-amylases to hydrolyze raw starch is related to the existence of surface binding sites (SBSs) for polysaccharides that can be distant from the active site. Crystallographic studies performed on BliAmy in the apo form and of enzyme bound with different oligosaccharides and oligosaccharide precursors revealed binding of these ligands to one SBS with two amino acids F257 and Y358 mainly involved in complex formation. The role of this SBS in starch binding and degradation was probed by designing enzyme variants mutated in this region (F257A and Y358A). Kinetic studies with different substrates show that starch binding through the SBS is disrupted in the mutants and that F257 and Y358 contributed cumulatively to binding and hydrolysis. Mutation of both sites (F257A/Y358A) resulted in a 5-fold lower efficacy with raw starch as substrate and at least 5.5-fold weaker binding compared to the wild type BliAmy, suggesting that the ability of BliAmy to hydrolyze raw starch with high efficiency is related to the level of its adsorption onto starch granules.

In-Vivo Antidiabetic Activity and In-Silico Mode of Action of LC/MS-MS Identified Flavonoids in Oleaster Leaves

Background: Olea europea L. subsp. europaea var. sylvestris (Mill) Lehr (Oleaster) is a wild endemic olive tree indigenous to the Mediterranean region. Olea europea leaves represent a natural reservoir of bioactive molecules that can be used for therapeutic purposes. Aim of the study: This work was conducted to study antidiabetic and antihyperglycemic activities of flavonoids from oleaster leaves using alloxan-induced diabetic mice. The mode of action of flavonoids against eight receptors that have a high impact on diabetes management and complication was also investigated using molecular docking. Results: During 28 days of mice treatment with doses 25 and 50 mg/kg b.w, the studied flavonoids managed a severe diabetic state (<450 mg/dL), exhibiting a spectacular antidiabetic and antihyperglycemic activity, and improved mice health status compared to diabetic control. The in-silico mode of action of oleaster flavonoids revealed the inhibition of protein tyrosine phosphatase 1B (PTP1B), Dipeptidyl-peptidase 4 (DPP4), α-Amylase (AAM), α-Glucosidase inhibition, Aldose reductase (AldR), Glycogen phosphorylase (GP), and the activation of free fatty acid receptor 1 (FFAR1). Conclusion: The findings obtained in the present work indicate that the flavonoids from the oleaster may constitute a safe multi-target remedy to treat diabetes.

A new GH13 subfamily represented by the α-amylase from the halophilic archaeon Haloarcula hispanica

α-Amylase catalyzes the endohydrolysis of α-1,4-glucosidic linkages in starch and related α-glucans. In the CAZy database, most α-amylases have been classified into the family GH13 counting at present more than 80,000 sequences and ~ 30 different enzyme specificities. The family has already been divided into 42 subfamilies, but additional subfamilies are still emerging. The present bioinformatics study was undertaken in an effort to propose a novel GH13 subfamily around the experimentally characterized α-amylase from the halophilic archaeon Haloarcula hispanica, which until now has not been assigned to any GH13 subfamily. The in silico analysis resulted in collecting a convincing group of putative haloarchaeal α-amylase homologues sharing sequence similarities mainly in their conserved sequence regions (CSRs) and forming a cluster in the evolutionary tree, which is well separated from representatives of established GH13 subfamilies. One of the most exclusive sequence features of the novel GH13 subfamily is the tyrosine (Tyr79 in H. hispanica α-amylase numbering) succeeding the glycine at the beginning of the CSR-VI at the β2 strand of the catalytic TIM-barrel. Evolutionarily, the novel GH13 α-amylase subfamily was most closely related to two clusters of GH13 subfamilies with the specificity of α-amylase, i.e. subfamilies GH13_5, 6 and 7 as well as GH13_15, 24, 27 and 28.

Site-saturation mutagenesis at amino acid 329 of Klebsiella pneumoniae halophilic α-amylase affects enzymatic properties

Halophilic α-amylases possess optimal activity in high salt concentrations. Therefore, they can be used in many extreme conditions in industrialised production. In the present work, a halophilic α-amylase (KP) from Klebsiella pneumoniae was characterised, and it exhibited a high specific activity of 3512 U/mg under optimal conditions of 2 M NaCl at 50°C and pH 6.5, but only 97 U/mg in the absence of salt. Furthermore, threonine at position 329 (Thr-329) was found to be related to the non-halophilic properties of KP according to PCR-based site-saturation mutagenesis. The activity of a mutant KP in which this threonine was replaced by aspartic acid was improved 14.6-fold compared with the native enzyme under salt-free conditions, and was increased by 14.8% in the absence of salt. Additionally, the optimal enzymatic properties of KP, including pH and temperature, were altered very little by the amino acid replacement. A further three halophilic α-amylases displayed similar mutational results. The findings provide a reference for bidirectional transformation of KP and similar halophilic enzymes.

Crystal structure of a maltooligosaccharide-forming amylase from Bacillus stearothermophilus STB04

To better understand structure-function relationships, an X-ray crystal structure of the maltooligosaccharide-forming amylase from Bacillus stearothermophilus STB04 (Bst-MFA) with bound acarbose has been determined at 2.2 Å. The structure revealed a classical three-domain fold stabilized by four calcium ions, in which CaI-CaIII form an unprecedented linear metal triad in the interior of domain B. Catalytic residues are deduced to be two aspartic acids and one glutamic acid (Asp234, Glu264, Asp331), and the acarbose is bound to surrounding amino acid residues, mainly through extensive hydrogen bonds. Furthermore, analysis of the structure indicates the existence of at least 8 subsites in Bst-MFA, six glycone sites (-6, -5, -4, -3, -2, -1) and two aglycone sites (+1, +2). Subsite +3 remains to be further explored. Sugar-binding subsites contribute to further presentation of the oligosaccharide-binding mode, which explains the product specificity of Bst-MFA to some extent. In addition, we propose a mechanism by which maltooligosaccharide-forming amylases produce particular maltooligosaccharide products, a result different from that seen with typical α-amylases. Finally, the three-dimensional structure of Bst-MFA complexed with acarbose provides the basis for further studies, designed to increase product specificity.

The structure of the AliC GH13 α-amylase from Alicyclobacillus sp. reveals the accommodation of starch branching points in the α-amylase family

α-Amylases are glycoside hydrolases that break the α-1,4 bonds in starch and related glycans. The degradation of starch is rendered difficult by the presence of varying degrees of α-1,6 branch points and their possible accommodation within the active centre of α-amylase enzymes. Given the myriad industrial uses for starch and thus also for α-amylase-catalysed starch degradation and modification, there is considerable interest in how different α-amylases might accommodate these branches, thus impacting on the potential processing of highly branched post-hydrolysis remnants (known as limit dextrins) and societal applications. Here, it was sought to probe the branch-point accommodation of the Alicyclobacillus sp. CAZy family GH13 α-amylase AliC, prompted by the observation of a molecule of glucose in a position that may represent a branch point in an acarbose complex solved at 2.1 Å resolution. Limit digest analysis by two-dimensional NMR using both pullulan (a regular linear polysaccharide of α-1,4, α-1,4, α-1,6 repeating trisaccharides) and amylopectin starch showed how the Alicyclobacillus sp. enzyme could accept α-1,6 branches in at least the -2, +1 and +2 subsites, consistent with the three-dimensional structures with glucosyl moieties in the +1 and +2 subsites and the solvent-exposure of the -2 subsite 6-hydroxyl group. Together, the work provides a rare insight into branch-point acceptance in these industrial catalysts.

Property Improvement of α-Amylase from Bacillus stearothermophilus by Deletion of Amino Acid Residues Arginine 179 and Glycine 180

To improve the properties of α-amylase from Bacillus stearothermophilus (AmyS), a deletion mutant AmyS∆R179-G180 was constructed by deleting arginine (Arg179) and glycine (Gly180) using site-directed mutagenesis. AmyS and AmyS∆R179-G180 were expressed in Bacillus subtilis and purified by ammonium sulfate precipitation, after which the enzymatic properties were characterized and compared. By deleting amino acids Arg179 and Gly180, the thermostability of α-amylase AmyS∆R179-G180 was enhanced and the half-life at 100 °C significantly increased from 24 to 33 min. In addition, AmyS∆R179-G180 exhibited greater acid resistance and lower calcium requirements to maintain α-amylase activity. The secretory capacity of the recombinant strain was evaluated by fed-batch fermentation in a 7.5-litre fermentor in which high α-amylase activity was obtained. The highest activity reached 3300 U/mL with a high productivity of 45.8 U/(mL·h).

Improving the reversibility of thermal denaturation and catalytic efficiency of Bacillus licheniformis α-amylase through stabilizing a long loop in domain B

The reversibility of thermal denaturation and catalytic efficiency of Bacillus licheniformis α-amylase were improved through site-directed mutagenesis. By using multiple sequence alignment and PoPMuSiC algorithm, Ser187 and Asn188, which located within a long loop in Domain B of Bacillus licheniformis α-amylase, were selected for mutation. In addition, Ala269, which is adjacent to Ser187 and Asn188, was also investigated. Seven mutants carrying the mutations S187D, N188T, N188S, A269K, A269K/S187D, S187D/N188T, and A269K/S187D/N188T were generated and characterized. The most thermostable mutant, A269K/S187D/N188T, exhibited a 9-fold improvement in half-life at 95°C and pH 5.5, compared with that of the wild-type enzyme. Mutant A269K/S187D/N188T also exhibited improved catalytic efficiency. The catalytic efficiency of mutant A269K/S187D/N188T reached 5.87×103±0.17 g·L-1·s-1 at pH 5.5, which is 1.84-fold larger than the corresponding value determined for the wild-type enzyme. Furthermore, the structure analysis showed that immobilization of the loop containing Ser187 and Asn188 plays a significant role in developing the properties of Bacillus licheniformis α-amylase.

Remarkable evolutionary relatedness among the enzymes and proteins from the α-amylase family

The α-amylase is a ubiquitous starch hydrolase catalyzing the cleavage of the α-1,4-glucosidic bonds in an endo-fashion. Various α-amylases originating from different taxonomic sources may differ from each other significantly in their exact substrate preference and product profile. Moreover, it also seems to be clear that at least two different amino acid sequences utilizing two different catalytic machineries have evolved to execute the same α-amylolytic specificity. The two have been classified in the Cabohydrate-Active enZyme database, the CAZy, in the glycoside hydrolase (GH) families GH13 and GH57. While the former and the larger α-amylase family GH13 evidently forms the clan GH-H with the families GH70 and GH77, the latter and the smaller α-amylase family GH57 has only been predicted to maybe define a future clan with the family GH119. Sequences and several tens of enzyme specificities found throughout all three kingdoms in many taxa provide an interesting material for evolutionarily oriented studies that have demonstrated remarkable observations. This review emphasizes just the three of them: (1) a close relatedness between the plant and archaeal α-amylases from the family GH13; (2) a common ancestry in the family GH13 of animal heavy chains of heteromeric amino acid transporter rBAT and 4F2 with the microbial α-glucosidases; and (3) the unique sequence features in the primary structures of amylomaltases from the genus Borrelia from the family GH77. Although the three examples cannot represent an exhaustive list of exceptional topics worth to be interested in, they may demonstrate the importance these enzymes possess in the overall scientific context.

Improving the thermostability and enhancing the Ca(2+) binding of the maltohexaose-forming α-amylase from Bacillus stearothermophilus

The thermostability of the maltohexaose-forming α-amylase from Bacillus stearothermophilus (AmyMH) without added Ca(2+) was improved through structure-based rational design in this study. Through comparison of a homologous model structure of AmyMH with the crystal structure of the thermostable α-amylase from Bacillus licheniformis, Ser242, which located at the beginning of fourth α-helix of the central (β/α)8 barrel was selected for mutation to improve thermostability. In addition, an amide-containing side chain (Asn193) and a loop in domain B (ΔIG mutation), which have been proven to be important for thermostability in corresponding position of other α-amylases, were also investigated. Five mutants carrying the mutations ΔIG, N193F, S242A, ΔIG/N193F, and ΔIG/N193F/S242A were generated and their proteins characterized. The most thermostable mutant protein, ΔIG/N193F/S242A, exhibited a 26-fold improvement in half-life at 95°C compared to the wild-type enzyme without added Ca(2+). Mutant ΔIG/N193F/S242A also exhibited substantially better activity and stability in the presence of the chelator EDTA, demonstrating enhanced Ca(2+) binding. These results suggest that mutant ΔIG/N193F/S242A has potential for use in the industrial liquefaction of starch.

Improvement in Thermostability of an Achaetomium sp. Strain Xz8 Endopolygalacturonase via the Optimization of Charge-Charge Interactions

Improving enzyme thermostability is of importance for widening the spectrum of application of enzymes. In this study, a structure-based rational design approach was used to improve the thermostability of a highly active, wide-pH-range-adaptable, and stable endopolygalacturonase (PG8fn) from Achaetomium sp. strain Xz8 via the optimization of charge-charge interactions. By using the enzyme thermal stability system (ETSS), two residues--D244 and D299--were inferred to be crucial contributors to thermostability. Single (D244A and D299R) and double (D244A/D299R) mutants were then generated and compared with the wild type. All mutants showed improved thermal properties, in the order D244A < D299R < D244A/D299R. In comparison with PG8fn, D244A/D299R showed the most pronounced shifts in temperature of maximum enzymatic activity (Tmax), temperature at which 50% of the maximal activity of an enzyme is retained (T50), and melting temperature (Tm), of about 10, 17, and 10.2°C upward, respectively, with the half-life (t1/2) extended by 8.4 h at 50°C and 45 min at 55°C. Another distinguishing characteristic of the D244A/D299R mutant was its catalytic activity, which was comparable to that of the wild type (23,000 ± 130 U/mg versus 28,000 ± 293 U/mg); on the other hand, it showed more residual activity (8,400 ± 83 U/mg versus 1,400 ± 57 U/mg) after the feed pelleting process (80°C and 30 min). Molecular dynamics (MD) simulation studies indicated that mutations at sites D244 and D299 lowered the overall root mean square deviation (RMSD) and consequently increased the protein rigidity. This study reveals the importance of charge-charge interactions in protein conformation and provides a viable strategy for enhancing protein stability.

Characterization of a thermostable raw-starch hydrolyzing α-amylase from deep-sea thermophile Geobacillus sp

A deep-sea thermophile, Geobacillus sp. 4j, was identified to grow on starch and produce thermostable amylase. N-terminally truncated form of Geobacillus sp. 4j α-amylase (Gs4j-amyA) was fused at its N-terminal end with the signal peptide of outer membrane protein A (OmpA) of Escherichia coli. The enzyme was over-expressed in E. coli BL21 with a maximum extracellular production of 130U/ml in shake flask. The yield of the transformant increased 22-fold as compared with that of the wild strain. The recombinant enzyme purified to apparent homogeneity by metal-affinity chromatography, exhibited a molecular mass of 62kDa. It displayed the maximal activity at 60-65°C and pH 5.5. Its half-life (t1/2) at 80°C was 4.25h with a temperature deactivation energy of 166.3kJ/mol. Compared to three commonly used commercial α-amylases, the Gs4j-amyA exhibited similar thermostable performance to BLA but better than BAA and BSA. It also showed a universally efficient raw starch hydrolysis performance superior to commercial α-amylases at an acidic pH approaching nature of starch slurry. As a new acidic-resistant thermostable α-amylase, it has the potential to bypass the industrial gelatinization step in raw starch hydrolysis.

The genus Geobacillus and their biotechnological potential

The genus Geobacillus comprises a group of Gram-positive thermophilic bacteria, including obligate aerobes, denitrifiers, and facultative anaerobes that can grow over a range of 45-75°C. Originally classified as group five Bacillus spp., strains of Bacillus stearothermophilus came to prominence as contaminants of canned food and soon became the organism of choice for comparative studies of metabolism and enzymology between mesophiles and thermophiles. More recently, their catabolic versatility, particularly in the degradation of hemicellulose and starch, and rapid growth rates have raised their profile as organisms with potential for second-generation (lignocellulosic) biorefineries for biofuel or chemical production. The continued development of genetic tools to facilitate both fundamental investigation and metabolic engineering is now helping to realize this potential, for both metabolite production and optimized catabolism. In addition, this catabolic versatility provides a range of useful thermostable enzymes for industrial application. A number of genome-sequencing projects have been completed or are underway allowing comparative studies. These reveal a significant amount of genome rearrangement within the genus, the presence of large genomic islands encompassing all the hemicellulose utilization genes and a genomic island incorporating a set of long chain alkane monooxygenase genes. With G+C contents of 45-55%, thermostability appears to derive in part from the ability to synthesize protamine and spermine, which can condense DNA and raise its Tm.

Three-dimensional structure of a variant `Termamyl-like' Geobacillus stearothermophilus α-amylase at 1.9 Å resolution

The enzyme-catalysed degradation of starch is central to many industrial processes, including sugar manufacture and first-generation biofuels. Classical biotechnological platforms involve steam explosion of starch followed by the action of endo-acting glycoside hydrolases termed α-amylases and then exo-acting α-glucosidases (glucoamylases) to yield glucose, which is subsequently processed. A key enzymatic player in this pipeline is the `Termamyl' class of bacterial α-amylases and designed/evolved variants thereof. Here, the three-dimensional structure of one such Termamyl α-amylase variant based upon the parent Geobacillus stearothermophilus α-amylase is presented. The structure has been solved at 1.9 Å resolution, revealing the classical three-domain fold stabilized by Ca2+ and a Ca2+-Na+-Ca2+ triad. As expected, the structure is similar to the G. stearothermophilus α-amylase but with main-chain deviations of up to 3 Å in some regions, reflecting both the mutations and differing crystal-packing environments.

α-Amylase: an enzyme specificity found in various families of glycoside hydrolases

α-Amylase (EC 3.2.1.1) represents the best known amylolytic enzyme. It catalyzes the hydrolysis of α-1,4-glucosidic bonds in starch and related α-glucans. In general, the α-amylase is an enzyme with a broad substrate preference and product specificity. In the sequence-based classification system of all carbohydrate-active enzymes, it is one of the most frequently occurring glycoside hydrolases (GH). α-Amylase is the main representative of family GH13, but it is probably also present in the families GH57 and GH119, and possibly even in GH126. Family GH13, known generally as the main α-amylase family, forms clan GH-H together with families GH70 and GH77 that, however, contain no α-amylase. Within the family GH13, the α-amylase specificity is currently present in several subfamilies, such as GH13_1, 5, 6, 7, 15, 24, 27, 28, 36, 37, and, possibly in a few more that are not yet defined. The α-amylases classified in family GH13 employ a reaction mechanism giving retention of configuration, share 4-7 conserved sequence regions (CSRs) and catalytic machinery, and adopt the (β/α)8-barrel catalytic domain. Although the family GH57 α-amylases also employ the retaining reaction mechanism, they possess their own five CSRs and catalytic machinery, and adopt a (β/α)7-barrel fold. These family GH57 attributes are likely to be characteristic of α-amylases from the family GH119, too. With regard to family GH126, confirmation of the unambiguous presence of the α-amylase specificity may need more biochemical investigation because of an obvious, but unexpected, homology with inverting β-glucan-active hydrolases.

Sequence and structural investigation of a novel psychrophilic α-amylase from Glaciozyma antarctica PI12 for cold-adaptation analysis

A novel α-amylase was isolated successfully from Glaciozyma antarctica PI12 using DNA walking and reverse transcription-polymerase chain reaction (RT-PCR) methods. The structure of this psychrophilic α-amylase (AmyPI12) from G. antarctica PI12 has yet to be studied in detail. A 3D model of AmyPI12 was built using a homology modelling approach to search for a suitable template and to generate an optimum target-template alignment, followed by model building using MODELLER9.9. Analysis of the AmyPI12 model revealed the presence of binding sites for a conserved calcium ion (CaI), non-conserved calcium ions (CaII and CaIII) and a sodium ion (Na). Compared with its template-the thermostable α-amylase from Bacillus stearothermophilus (BSTA)-the binding of CaII, CaIII and Na ions in AmyPI12 was observed to be looser, which suggests that the low stability of AmyPI12 allows the protein to work at different temperature scales. The AmyPI12 amino acid sequence and model were compared with thermophilic α-amylases from Bacillus species that provided the highest structural similarities with AmyPI12. These comparative studies will enable identification of possible determinants of cold adaptation.

Without salt, the 'thermophilic' protein Mth10b is just mesophilic

Most proteins from thermophiles or hyperthermophiles are intrinsically thermostable. However, though Methanobacterium thermoautotrophicum ΔH is a thermophilic archaeon with an optimal growth temperature of 65 °C, Mth10b, an atypical member the Sac10b protein family from M. thermoautotrophicum ΔH, seems not intrinsically thermostable. In this work, to clarify the molecular mechanism of Mth10b remaining stable under its physiological conditions, the thermodynamic properties of Mth10b were studied through equilibrium unfolding experiments performed at pH 7.0 monitored by circular dichroism (CD) spectra in detail. Our work demonstrated that Mth10b is not intrinsically thermostable and that due to the masking effect upon the large numbers of destabilizing electrostatic repulsions resulting from the extremely uneven distribution of charged residues over the surface of Mth10b, salt can contribute to the thermostability of Mth10b greatly. Considering that the intracellular salt concentration is high to 0.7 M, we concluded that salt is the key extrinsic factor to Mth10b remaining stable under its physiological conditions. In other word, without salt, 'thermophilic' protein Mth10b is just a mesophilic one.

Crystallization and preliminary crystallographic analysis of dextranase from Streptococcus mutans

Streptococcus mutans dextranase hydrolyzes the internal α-1,6-linkages of dextran and belongs to glycoside hydrolase family 66. An N- and C-terminal deletion mutant of S. mutans dextranase was crystallized by the sitting-drop vapour-diffusion method. The crystals diffracted to a resolution of 1.6 Å and belonged to space group P2(1), with unit-cell parameters a = 53.2, b = 89.7, c = 63.3 Å, β = 102.3°. Assuming that the asymmetric unit of the crystal contained one molecule, the Matthews coefficient was calculated to be 4.07 Å(3) Da(-1); assuming the presence of two molecules in the asymmetric unit it was calculated to be 2.03 Å(3) Da(-1).

Crystal structure of histidine-containing phosphocarrier protein from Thermoanaerobacter tengcongensis MB4 and the implications for thermostability

Protein thermostability is an inherent characteristic of proteins from thermophilic microorganisms, and therefore enables these organisms to survive at extreme temperatures. Although it is well-known that thermostable proteins are critical for the growth of thermophilic organisms, the structural basis of protein thermostability is not yet fully understood. The histidine-containing phosphocarrier (HPr) protein, a phosphate shuttle protein in the phosphoenolpyruvate-dependent sugar transport system (PTS) of bacterial species, is an ideal model for investigating protein thermostability with respect to its small size and deficiency in disulphide bonds or cofactors. In this study, the HPr protein from Thermoanaerobacter tengcongensis (TtHPr) is cloned and purified. Crystal structure with good quality has been determined at 2.3 Å resolution, which provides a firm foundation for exploring the thermostable mechanism. However, it shows that the crystal structure is conserved and no clue can be obtained from this single structure. Furthermore, detailed comparison of sequence and structure with the homologs from meso- or thermophilic bacteria shows no obvious rule for thermostability, but the extra salt-bridge existing only in thermophilic bacteria might be a better explanation for thermostability of HPr. Thus, mutations are performed to interrupt the salt-bridge in HPrs in thermophilic bacteria. Using site-directed mutations and the circular dichroism method, thermostability is evaluated, and the mutational variations are shown to have a faster denaturing rate than for wild-type viruses, indicating that mutations cause instability in the HPrs. Understanding the higher-temperature resistance of thermophilic and hyperthermophilic proteins is essential to studies on protein folding and stability, and is critical in engineering efficient enzymes that can work at a high temperature.

In silico characterization of thermostable lipases

Thermostable lipases are of high priority for industrial applications as they are endowed with the capability of carrying out diversified reactions at elevated temperatures. Extremophiles are their potential source. Sequence and structure annotation of thermostable lipases can elucidate evolution of lipases from their mesophilic counterparts with enhanced thermostability hence better industrial potential. Sequence analysis highlighted the conserved residues in bacterial and fungal thermostable lipases. Higher frequency of AXXXA motif and poly Ala residues in lid domain of thermostable Bacillus lipases were distinguishing characteristics. Comparison of amino acid composition among thermostable and mesostable lipases brought into light the role of neutral, charged and aromatic amino acid residues in enhancement of thermostability. Structural annotation of thermostable lipases with that of mesostable lipases revealed some striking features which are increment of gamma turns in thermostable lipases; being first time reported in our paper, longer beta strands, lesser beta-branched residues in helices, increase in charged-neutral hydrogen bonding pair, hydrophobic-hydrophobic contact and differences in the N-cap and C-cap residues of the α helices. Conclusively, it can be stated that subtle changes in the arrangement of amino acid residues in the tertiary structure of lipases contributes to enhanced thermostability.

Structure of Bacillus amyloliquefaciens alpha-amylase at high resolution: implications for thermal stability

The crystal structure of Bacillus amyloliquefaciens alpha-amylase (BAA) at 1.4 A resolution revealed ambiguities in the thermal adaptation of homologous proteins in this family. The final model of BAA is composed of two molecules in a back-to-back orientation, which is likely to be a consequence of crystal packing. Despite a high degree of identity, comparison of the structure of BAA with those of other liquefying-type alpha-amylases indicated moderate discrepancies at the secondary-structural level. Moreover, a domain-displacement survey using anisotropic B-factor and domain-motion analyses implied a significant contribution of domain B to the total flexibility of BAA, while visual inspection of the structure superimposed with that of B. licheniformis alpha-amylase (BLA) indicated higher flexibility of the latter in the central domain A. Therefore, it is suggested that domain B may play an important role in liquefying alpha-amylases, as its rigidity offers a substantial improvement in thermostability in BLA compared with BAA.