Adsorption of plasma proteins and fibronectin on poly(hydroxylethyl methacrylate) brushes of different thickness and their relationship with adhesion and migration of vascular smooth muscle cells

Thermoresponsive Brush Coatings for Cell Sheet Engineering with Low Protein Adsorption above the Polymers' Phase Transition Temperature

Thermoresponsive polymer coatings on cell culture substrates enable noninvasive cell detachment and cell sheet fabrication for biomedical applications. Optimized coatings should support controlled culture and detachment of various cell types and allow chemical modifications, e.g., to introduce specific growth factors for enhanced gene expression. Furthermore, the sterilization and storage stability of the coatings must be assessed for translational attempts. Poly(glycidyl ether) (PGE) brush coatings with short alkoxy side chains provide a versatile platform for cell culture and detachment, but their polyether backbones are susceptible to oxidation and degradation. Thus, we rationally designed potential alternatives with thermoresponsive glycerol-based block copolymers comprising a stable polyacrylate or polymethacrylate backbone and an oligomeric benzophenone (BP)-based anchor. The resulting poly(ethoxy hydroxypropyl acrylate-b-benzophenone acrylate) (pEHPA-b-BP) and poly(ethoxy hydroxypropyl methacrylate-b-benzophenone methacrylate) (pEHPMA-b-BP) block copolymers preserve the short alkoxy-terminated side chains of the PGE derived structure on a stable, but hydrophobic, aliphatic backbone. The amphiphilicity balance is maintained through incorporated hydroxyl groups, which simultaneously can be used for chemical modification. The polymers were tailored into brush coatings on polystyrene surfaces via directed adsorption using the BP oligomer anchor. The resulting coatings with thickness values up to ∼3 nm supported efficient adhesion and proliferation of human fibroblasts despite minimal protein adsorption. The conditions for cell sheet fabrication on pEHPA-b-BP were gentler and more reliable than on pEHPMA-b-BP, which required additional cooling. Hence, the stability of pEHPA-b-BP and PGE coatings was evaluated post gamma and formaldehyde (FO) gas sterilization. Gamma sterilization partially degraded PGE coatings and hindered cell detachment on pEHPA-b-BP. In contrast, FO sterilization only slowed detachment on PGE coatings and had no adverse effects on pEHPA-b-BP, maintaining their efficient performance in cell sheet fabrication.

Molecular Dynamics Study of the Antifouling Mechanism of Hydrophilic Polymer Brushes

We perform all-atom molecular dynamics simulations of the adsorption of amino acid side-chain analogues on polymer brushes. The analogues examined are nonpolar isobutane, polar propionamide, negatively charged propionate ion, and positively charged butylammonium ion. The polymer brushes consist of a sheet of graphene and strongly hydrophilic poly(carboxybetaine methacrylate) (PCBMA) or weakly hydrophilic poly(2-hydroxyethyl methacrylate) (PHEMA). The effective interactions between isobutane and polymer chains are repulsive for PCBMA and attractive for PHEMA. Gibbs energy decomposition analysis shows that this is due to the abundance of water in the PCBMA brush, which increases the steric repulsion and decreases the Lennard-Jones attraction. The affinity of the hydrophilic analogues is low for both PCBMA and PHEMA chains, but the balance between the components of the Gibbs energy is different for the two polymers. The simulations are performed at several θ, where θ is the degree of overlap of polymer chains. The antifouling performance against the neutral analogues is better for PCBMA than for PHEMA in the low and high θ regimes. However, in the middle θ regime, the antifouling performance of PHEMA is close to or better than that of PCBMA. This is attributed to the formation of a dense layer of PHEMA on the graphene surface that inhibits direct adsorption of analogue molecules on graphene. The charged analogues do not bind to either the PHEMA or PCBMA brush irrespective of θ.

Molecular dynamics study of the interactions between a hydrophilic polymer brush on graphene and amino acid side chain analogues in water

We perform all-atom molecular dynamics simulations of poly(2-hydroxyethyl methacrylate) (PHEMA) brushes in aqueous solutions of isobutane, propionamide, and sodium propionate. These solutes are side chain analogues to leucine, glutamine, and glutamic acid, respectively. We compute the Gibbs energy profile of the solute's adsorption to the polymer brush and decompose it into the contributions from the steric repulsion, van der Waals interaction, and Coulomb interaction to reveal the energetic origin of repulsion or attraction of the solute by the polymer brush. The Henry adsorption constant is the amount of adsorption normalized by the concentration in aqueous solution. We examine the dependence of this quantity on the grafting density and chain length. Our results suggest that the concurrent primary and ternary adsorption mechanism may be more important than previously expected when the solute is hydrophobic.

A Co-Polymerizable Linker for the Covalent Attachment of Fibronectin Makes pHEMA Hydrogels Cell-Adhesive

Hydrogels are attractive biomaterials because their chemical and mechanical properties can be tailored to mimic those of biological tissues. However, many hydrogels do not allow cell or protein attachment. Therefore, they are post-synthetically functionalized by adding functional groups for protein binding, which then allows cell adhesion in cell culture substrates. However, the degree of functionalization and covalent binding is difficult to analyze in these cases. Moreover, the density of the functional groups and the homogeneity of their distribution is hard to control. This work introduces another strategy for the biofunctionalization of hydrogels: we synthesized a polymerizable linker that serves as a direct junction between the polymeric structure and cell adhesion proteins. This maleimide-containing, polymerizable bio-linker was copolymerized with non-functionalized monomers to produce a bioactive hydrogel based on poly(2-hydroxyethyl methacrylate) (pHEMA). Therefore, the attachment site was only controlled by the polymerization process and was thus uniformly distributed throughout the hydrogel. In this way, the bio-conjugation by a protein-binding thiol-maleimide Michael-type reaction was possible in the entire hydrogel matrix. This approach enabled a straightforward and highly effective biofunctionalization of pHEMA with the adhesion protein fibronectin. The bioactivity of the materials was demonstrated by the successful adhesion of fibroblast cells.

Role of Curing Temperature of Poly(Glycerol Sebacate) Substrates on Protein-Cell Interaction and Early Cell Adhesion

A novel procedure to obtain smooth, continuous polymeric surfaces from poly(glycerol sebacate) (PGS) has been developed with the spin-coating technique. This method proves useful for separating the effect of the chemistry and morphology of the networks (that can be obtained by varying the synthesis parameters) on cell-protein-substrate interactions from that of structural variables. Solutions of the PGS pre-polymer can be spin-coated, to then be cured. Curing under variable temperatures has been shown to lead to PGS networks with different chemical properties and topographies, conditioning their use as a biomaterial. Particularly, higher synthesis temperatures yield denser networks with fewer polar terminal groups available on the surface. Material-protein interactions were characterised by using extracellular matrix proteins such as fibronectin (Fn) and collagen type I (Col I), to unveil the biological interface profile of PGS substrates. To that end, atomic force microscopy (AFM) images and quantification of protein adsorbed in single, sequential and competitive protein incubations were used. Results reveal that Fn is adsorbed in the form of clusters, while Col I forms a characteristic fibrillar network. Fn has an inhibitory effect when incubated prior to Col I. Human umbilical endothelial cells (HUVECs) were also cultured on PGS surfaces to reveal the effect of synthesis temperature on cell behaviour. To this effect, early focal adhesions (FAs) were analysed using immunofluorescence techniques. In light of the results, 130 °C seems to be the optimal curing temperature since a preliminary treatment with Col I or a Fn:Col I solution facilitates the formation of early focal adhesions and growth of HUVECs.

A comparative study of autogenous, allograft and artificial bone substitutes on bone regeneration and immunotoxicity in rat femur defect model

Repair and reconstruction of large bone defect were often difficult, and bone substitute materials, including autogenous bone, allogenic bone and artificial bone, were common treatment strategies. The key to elucidate the clinical effect of these bone repair materials was to study their osteogenic capacity and immunotoxicological compatibility. In this paper, the mechanical properties, micro-CT imaging analysis, digital image analysis and histological slice analysis of the three bone grafts were investigated and compared after different time points of implantation in rat femur defect model. Autogenous bone and biphasic calcium phosphate particular artificial bone containing 61.4% HA and 38.6% β-tricalcium phosphate with 61.64% porosity and 0.8617 ± 0.0068 g/cm³ density (d ≤ 2 mm) had similar and strong bone repair ability, but autogenous bone implant materials caused greater secondary damage to experimental animals; allogenic bone exhibited poor bone defect repair ability. At the early stage of implantation, the immunological indexes such as Immunoglobulin G, Immunoglobulin M concentration and CD4 cells' population of allogenic bone significantly increased in compared with those of autologous bone and artificial bone. Although the repair process of artificial bone was relatively inefficient than autologous bone graft, the low immunotoxicological indexes and acceptable therapeutic effects endowed it as an excellent alternative material to solve the problems with insufficient source and secondary trauma of autogenous bone.

Defined Substrate by Aptamer Modification with the Balanced Properties of Selective Capture and Stemness Maintenance of Mesenchymal Stem Cells

The recruitment of endogenous mesenchymal stem cells (MSCs), as an alluring approach for in situ tissue regeneration, always accompanies with other types of cells. Therefore, it is of enormous value to bestow a substrate with the property of selective capture to MSCs. However, it was reported that when MSCs are cultured on a substrate with excessive affinity, their stemness diminished. Therefore, constructing a substrate with the balanced ability of selective capture and stemness maintenance becomes a big challenge. In this study, an Aptamer 19S (Apt19S)-modified substrate was fabricated by grafting Apt19S on a PEGylated glass substrate. The X-ray photoelectron spectroscopy results verified that the antifouling poly(ethylene glycol) (PEG) layer was created. Tracking by ellipsometry, the thicknesses of PEG layers were proved to increase with PEG concentration. The results of the quartz crystal microbalance also validated that the Apt19S densities could be modulated by the concentrations of the Apt19S solution. The results of the cell adhesion assay indicated that the modification of Apt19S caused a significant increase in the adhesion ratio and area of rBMSCs. Selective adhesion was confirmed by coculture of rBMSCs with macrophages and NIH3T3 cells, demonstrating that a higher proportion of rBMSCs adhered to the Apt19S-modified substrate. The results of specific capture were further confirmed by a flow model to simulate the body fluid flow. The comprehensive results of reverse transcription polymerase chain reaction, immunofluorescence staining, proliferation capacity, and differentiation assay showed that the stemness of rBMSCs was maintained better on a substrate with the appropriate Apt19S density. All of these results indicated that Apt19S modification is an effective strategy to endow a substrate with the specific capture ability of MSCs, and the balance between selective capture and stemness maintenance can be achieved by the precise regulation of the aptamer density.

The thickness of poly-phenoxyethyl methacrylate brush interferes with cellular behavior and function of myofibers

Introducing or grafting molecules onto biomaterial surfaces to regulate muscle cell destination via biophysical cues is one of the important steps for biomaterial design in muscle tissue engineering. Therefore, it is important to understand the interaction between myoblasts and myofibers with substrates modified by biomimetic layer with different thicknesses. In this study, we used a surface-induced atom transfer radical polymerization method to synthetize and graft poly-phenoxyethyl methacrylate (PHEMA) brushes having different lengths on the glass substrates. C2C12 myoblasts were seeded on the PHEMA brushes and differentiated using horse serum, for analyzing the sensibility of muscle cells to feel environment changing, and further investigating whether the depths of grafting layer on the biomaterial surface are important factors in regulating muscle cell behaviors. Our results demonstrated that on the thicker PHEMA brushes surface (200 and 450 nm), C2C12 myoblasts showed a better survival and proliferation and were favorable for cell fusion and myotube formation. Furthermore, myofibers survived on the thicker brushes were more functional and upregulated cytoskeleton proteins (tubulin, vimentin, and vinculin) and FAK levels, and enhanced the expression levels for mechanical stress molecules (HGF, NOS-1, and c-Met). These results suggest that grafting thickness of PHEMA layer on the substrate led to the myoblasts/myofiber behavior change, which would be valuable for the design and preparation of the modified layer on muscle tissue engineering scaffolds. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 1264-1272, 2019.

Hydrogels from feather keratin show higher viscoelastic properties and cell proliferation than those from hair and wool keratins

Hydrogel prepared from keratin shows potential applications in tissue engineering. However, the importance of the keratin sources has not been considered. The objectives of this study were to characterize and compare the rheological (storage modulus), physical (porosity, pore size, swelling capacity, and water contact angle) and in vitro cell compatibility of hydrogel scaffolds prepared from various keratin sources. Keratins were characterized by means of their molecular weight, amino acid composition, thermal and conformational properties. Hydrogels from chicken feather keratins demonstrated substantially higher storage modulus (G') than hair and wool keratin hydrogels. However, higher swelling capacity (>3000%) was determined in hair and wool over feather keratin (1500%) hydrogels. Our results suggest that small molecular weight and β-sheet conformation of feather keratin (~10 kDa) facilitated the self-assembly of rigid hydrogels through disulfide bond re-oxidation. Whereas, high molecular weight (10-75 kDa) stretchable α-helix conformation in hair and wool keratins resulted in weaker hydrogels. The cell cultures using fibroblasts showed the highest proliferation rate on chicken feather keratin hydrogel scaffolds. After 15 days of culture, partial breakdown of keratin fibers was observed. Results indicate that stiffer avian keratins can be used to fabricate more mechanically robust biomaterials than mammalian keratins.

Grafting Density Impacts Local Nanoscale Hydrophobicity in Poly(ethylene glycol) Brushes

Accumulated single-molecule observations of a fluorescent solvatochromic probe molecule were found to provide detailed local information about nanoscale hydrophobicity in polymer brushes. Using this approach, we showed that local hydrophobicity in poly(ethylene glycol) (PEG) brushes was spatially heterogeneous and increased with the surface grafting density of the polymer chains. These findings may provide an explanation for prior observations of the denaturation of surface-adsorbed proteins on PEG brushes with high grafting densities, which is believed to influence protein-mediated cell-surface interactions. Moreover, by employing the broad range of existing environmentally sensitive fluorophores, this approach may potentially be used to characterize nanoscale changes in a variety of physicochemical properties within polymeric materials.

Cytotoxicity of gold nanoparticles with different structures and surface-anchored chiral polymers

Nanoparticles (NPs) can have profound effects on cell biology. However, the potential adverse effects of gold nanoparticles (AuNPs) with different surface chirality and structures have not been elucidated. In this study, monolayers of poly(acryloyl-l(d)-valine (l(d)-PAV) chiral molecules were anchored on the surfaces of gold nanocubes (AuNCs) and nanooctahedras (AuNOs), respectively. The l-PAV-AuNCs and d-PAV-AuNCs, or the l-PAV-AuNOs and d-PAV-AuNOs, had identical physicochemical properties in terms of size, morphology and ligand density except of the reverse molecular chirality on the particle surfaces, respectively. The l-PAV capped AuNCs and AuNOs exhibited larger cytotoxicity to A549 cells than the D-PAV coated ones, and the PAV-AuNOs had larger cytotoxicity than PAV-AuNCs when being capped with the same type of enantiomers, respectively. The cytotoxicity was positively correlated with the cellular uptake amount, and thereby the production of intracellular reactive oxygen species (ROS).

STATEMENT OF SIGNIFICANCE

• Gold nanoparticles with different structure and surface chirality are fabricated. • The structure and surface chirality at the nanoscale can influence cytotoxicity and genotoxicity. • A new perspective on designing nanoparticles for drug delivery, bioimaging and diagnosis.

Physical properties of mixed Langmuir monolayers of polystyrene particles with poly(N,N-dimethylaminoethylmethacrylate) hairs and a poly(2-hydroxyethyl methacrylate) polymer at an air/water interface

The effect of adding a poly(2-hydroxyethyl methacrylate) (PHEMA) polymer to a Langmuir monolayer of polystyrene particles carrying poly(N,N-dimethylaminoethylmethacrylate) hair (PDMA-PS particles) at air/water interfaces on the physical properties of the monolayer was studied. The addition of PHEMA to a PDMA-PS particle monolayer at an air/water interface gave a polymer-like monolayer at low surface pressures and a particle-like monolayer at high surface pressures. The PDMA-PS particles formed small aggregates that were dispersed throughout the PHEMA monolayer at low surface pressures, a result suggesting that the particles were trapped in the PHEMA network. Monolayers of closely packed particles were observed at higher surface pressures, suggesting that PHEMA was squeezed-out at higher surface pressures. The stiffness of the mixed monolayer was independent of the surface pressure, but increased as the ratio of PHEMA in the mixed monolayer increased. This increased stiffness was explained by the immobilization of the PDMA-PS particles by PHEMA.

In Situ Characterization of Hydrated Proteins in Water by SALVI and ToF-SIMS

This work demonstrates in situ characterization of protein biomolecules in the aqueous solution using the System for Analysis at the Liquid Vacuum Interface (SALVI) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). The fibronectin protein film was immobilized on the silicon nitride (SiN) membrane that forms the SALVI detection area. During ToF-SIMS analysis, three modes of analysis were conducted including high spatial resolution mass spectrometry, two-dimensional (2D) imaging, and depth profiling. Mass spectra were acquired in both positive and negative modes. Deionized water was also analyzed as a reference sample. Our results show that the fibronectin film in water has more distinct and stronger water cluster peaks compared to water alone. Characteristic peaks of amino acid fragments are also observable in the hydrated protein ToF-SIMS spectra. These results illustrate that protein molecule adsorption on a surface can be studied dynamically using SALVI and ToF-SIMS in the liquid environment for the first time.

Facile Fabrication of Lubricant-Infused Wrinkling Surface for Preventing Thrombus Formation and Infection

Despite the advanced modern biotechniques, thrombosis and bacterial infection of biomedical devices remain common complications that are associated with morbidity and mortality. Most antifouling surfaces are in solid form and cannot simultaneously fulfill the requirements for antithrombosis and antibacterial efficacy. In this work, we present a facile strategy to fabricate a slippery surface. This surface is created by combining photografting polymerization with osmotically driven wrinkling that can generate a coarse morphology, and followed by infusing with fluorocarbon liquid. The lubricant-infused wrinkling slippery surface can greatly prevent protein attachment, reduce platelet adhesion, and suppress thrombus formation in vitro. Furthermore, E. coli and S. aureus attachment on the slippery surfaces is reduced by ∼98.8% and ∼96.9% after 24 h incubation, relative to poly(styrene-b-isobutylene-b-styrene) (SIBS) references. This slippery surface is biocompatible and has no toxicity to L929 cells. This surface-coating strategy that effectively reduces thrombosis and the incidence of infection will greatly decrease healthcare costs.

Biomaterials for in situ tissue regeneration: development and perspectives

Biomaterials are of fundamental importance to in situ tissue regeneration, which has emerged as a powerful method to treat tissue defects. The development and perspectives of biomaterials for in situ tissue regeneration were summarized.