Comparative evaluation of the physicochemical properties of nano-hydroxyapatite/collagen and natural bone ceramic/collagen scaffolds and their osteogenesis-promoting effect on MC3T3-E1 cells

Investigation of Biodegradation and Biocompatibility of Chitosan-Bacterial Cellulose Composite Scaffold for Bone Tissue Engineering Applications

Developing scaffolds with a three-dimensional porous structure and adequate mechanical properties remains a key challenge in tissue engineering of bone. These scaffolds must be biocompatible and biodegradable to effectively support osteoblastic cell attachment, metabolic activity, and differentiation. This study successfully fabricated a chitosan-bacterial cellulose (CS-BC) composite scaffold using the solvent casting/particle leaching (SCPL) technique, with NaOH/urea solution and sodium chloride crystals as the porogen. The scaffold exhibited a well-distributed porous network with pore sizes ranging from 300 to 500 µm. Biodegradation tests in PBS containing lysozyme revealed a continuous degradation process, while in vitro studies with MC3T3-E1 cells (pre-osteoblastic mouse cell line) demonstrated excellent cell attachment, as observed through SEM imaging. The scaffold also promoted increased metabolic activity (OD values) in the MTT assay, and enhanced alkaline phosphatase (ALP) activity and upregulated expression of osteogenic-related genes. These findings suggest that the CS-BC composite scaffold, fabricated using the SCPL method, holds great potential as a candidate for bone tissue engineering applications.

Composite barrier membrane for bone regeneration: advancing biomaterial strategies in defect repair

Bone defects represent a significant challenge in clinical practice, driving the need for innovative solutions that effectively support bone regeneration. Barrier membranes, due to playing a critical role in creating an environment conducive to bone regeneration by preventing the infiltration of non-osteogenic tissues, are widely applied to bone repair. However, inadequate spatial stability and osteogenesis-promoting ability often limit current barrier membranes. In response to these challenges, we have developed an advanced gelatin methacrylate/hydroxyapatite/hydroxyapatite membrane (GelMA/HAp/HAM) composite biomaterial designed as a barrier membrane with superior spatial stability and optimal degradation properties. The GelMA/HAp/HAM composite features a bilayer structure, with each layer possessing distinct properties: the dense hydroxyapatite membrane (HAM) acts as a barrier to prevent connective tissue infiltration. In contrast, the porous gelatin methacrylate/hydroxyapatite (GelMA/HAp) hydrogel layer promotes osteogenesis. Studies have demonstrated the composite's excellent biocompatibility and its significant osteogenic differentiation enhancement. This composite membrane holds great promise for clinical applications in bone defect repair, providing a new avenue for improving patient outcomes in regenerative medicine.

Efficacy of a gelatin-based hemostatic sponge and hydroxyapatite-chitosan nanocomposites (nHAp/CS) on regeneration of radial bone defects in rabbits

Background

Bone-graft substitutes are a frequently employed method for the clinical reconstruction of osseous bone defects, and research on synthetic biomaterials is currently ongoing. Absorbable hemostatic gelatin sponge and hydroxyapatite-chitosan nanocomposites (nHAp/CS) have gained popularity in recent years because of their inherent characteristics: osteogenesis, osteoconductivity, osteoinductivity, biodegradability, and biocompatibility.

Aim

The aim of the study was to evaluate the effectiveness of 1) a gelatin-based hemostatic sponge (Surgispon) and 2) a combination of a weight ratio of 75/25 nHAp/CS composite with a Surgispon for osteogenic potential in the treatment of full-thickness segmental osseous defects in the radius of rabbits.

Methods

The 18 New Zealand rabbits had 10-mm-induced segmental diaphyseal defects of the left limb radius and were randomly allocated into three groups: group I left the defects untreated (control group), group II used a Surgispon, and group III had a weight ratio of 75/25 nHAp/CS composite wrapped with a Surgispon. Quantitative evaluation of the bone repair at the defect site in each group (n = 6), radiographic, gross, computed tomography (CT), and histopathological examinations were performed at 6 weeks (n = 3) and 12 weeks (n = 3) postoperatively.

Results

The quantitative statistical analysis of various evaluation methods at 6 weeks post-implantation demonstrated that there was no statistically significant difference between the groups (p > 0.05). The statistically significant differences (p < 0.05) between groups I and II, while groups I and III, were evident 12 weeks postoperatively.

Conclusion

The findings of the radiographic, macroscopic, CT, and histopathological analyses firmly demonstrate that the combination of a 75/25 weight ratio composite of nHAp/CS with Surgispon is more effective than Surgispon alone in its ability to significantly increase bone formation. This could provide a prospective option for treating segmental bone defects.

Efficacy of a gelatin-based hemostatic sponge and hydroxyapatite-chitosan nanocomposites (nHAp/CS) on regeneration of radial bone defects in rabbits

Background

Bone-graft substitutes are a frequently employed method for the clinical reconstruction of osseous bone defects, and research on synthetic biomaterials is currently ongoing. Absorbable hemostatic gelatin sponge and hydroxyapatite-chitosan nanocomposites (nHAp/CS) have gained popularity in recent years because of their inherent characteristics: osteogenesis, osteoconductivity, osteoinductivity, biodegradability, and biocompatibility.

Aim

The aim of the study was to evaluate the effectiveness of 1) a gelatin-based hemostatic sponge (Surgispon) and 2) a combination of a weight ratio of 75/25 nHAp/CS composite with a Surgispon for osteogenic potential in the treatment of full-thickness segmental osseous defects in the radius of rabbits.

Methods

The 18 New Zealand rabbits had 10-mm-induced segmental diaphyseal defects of the left limb radius and were randomly allocated into three groups: group I left the defects untreated (control group), group II used a Surgispon, and group III had a weight ratio of 75/25 nHAp/CS composite wrapped with a Surgispon. Quantitative evaluation of the bone repair at the defect site in each group (n = 6), radiographic, gross, computed tomography (CT), and histopathological examinations were performed at 6 weeks (n = 3) and 12 weeks (n = 3) postoperatively.

Results

The quantitative statistical analysis of various evaluation methods at 6 weeks post-implantation demonstrated that there was no statistically significant difference between the groups (p > 0.05). The statistically significant differences (p < 0.05) between groups I and II, while groups I and III, were evident 12 weeks postoperatively.

Conclusion

The findings of the radiographic, macroscopic, CT, and histopathological analyses firmly demonstrate that the combination of a 75/25 weight ratio composite of nHAp/CS with Surgispon is more effective than Surgispon alone in its ability to significantly increase bone formation. This could provide a prospective option for treating segmental bone defects.

In situ co-deposition synthesis for collagen-Astragalus polysaccharide composite with intrafibrillar mineralization as potential biomimetic-bone repair materials

A hybrid material possessing both componential and structural imitation of bone tissue is the preferable composites for bone defect repair. Inspired by the microarchitecture of native bone, this work synthesized in vitro a functional mineralized collagen fibril (MCF) material by utilizing the method of in situ co-precipitation, which was designed to proceed in the presence of Astragalus polysaccharide (APS), thus achieving APS load within the biomineralized collagen-Astragalus polysaccharide (MCAPS) fibrils. Transmission electron microscope (TEM), selected area electron diffraction (SAED) and scanning electronic microscopy (SEM) identified the details of the intrafibrillar mineralization of the MCAPS fibrils, almost mimicking the secondary level of bone tissue microstructure. A relatively uniform and continuous mineral layer formed on and within all collagen fibrils and the mineral phase was identified as typical weak-crystalline hydroxyapatite (HA) with a Ca/P ratio of about 1.53. The proliferation of bone marrow-derived mesenchymal stem cells (BMSC) and mouse embryo osteoblast precursor cells (MC3T3-E1) obtained a significant promotion by MCAPS. As for the osteogenic properties of MCAPS, a distinct increase in the alkaline phosphatase (ALP) activity and the number of calcium nodules (CN) in BMSC and MC3T3-E1 was detected. The up-regulation of three osteogenic-related genes of RUNX-2, BMP-2 and OCN were confirmed via reverse transcription-quantitative polymerase chain reaction (RT-qPCR) to further verify the osteogenic performance promotion of MCAPS. A period of 14 days of culture demonstrated that MCAPS-L exhibited a preferable efficacy in enhancing ALP activity and CN quantity, as well as in promoting the expression of osteogenic-related genes over MCAPS-M and MCAPS-H, indicating that a lower dose of APS within the material of MCAPS is more appropriate for its osteogenesis promotion properties.

Innovative insights: ITLN1 modulates renal injury in response to radiation

Radiation-induced kidney injury is a common side effect of radiotherapy, as the pelvic region is in close proximity to the kidneys, posing a risk of inducing radiation-induced kidney injury when treating any pelvic malignancies with radiotherapy. This type of injury typically manifests as chronic kidney disease a few months after radiotherapy, with the potential to progress to end-stage renal disease. Radiation-induced damage involves various components of the kidney, including glomeruli, tubules, interstitium, and extracellular matrix. Therefore, investigating its molecular mechanisms is crucial. In this study, we extensively searched literature databases, selecting recent transcriptomic studies related to acute kidney injury (AKI) published in the past decade. We downloaded the raw RNA sequencing datasets GSE30718 and GSE66494 related to AKI from the GEO database and identified that intestinal-type lectin ITLN1 plays a significant role in regulating radiation-induced kidney injury in rats. Differential gene analysis was performed using chip data from the GEO database, and further bioinformatics analysis identified 13 genes that may be involved in regulating kidney injury, with ITLN1 being the most relevant to kidney damage, thus selected as the target gene for this study. Subsequently, a rat model of radiation-induced kidney injury was established for experimental validation, assessing kidney tissue morphology and injury extent through staining observation and immunohistochemical staining. The protective effect of ITLN1 on kidney function was evaluated by measuring changes in rat body weight and blood pressure, serum kidney injury markers, and kidney structure. The experimental results indicate that overexpression of ITLN1 can improve kidney function in rats with radiation-induced kidney injury by activating the Akt/GSK-3β/Nrf2 signaling pathway, suppressing oxidative stress, cell apoptosis, inflammation, cellular senescence, and fibrosis. This study highlights the significant role of ITLN1 in regulating kidney injury, providing a novel target for future treatments of radiation-induced kidney injury.

Balance between the CMC/ACP Nanocomplex and Blood Assimilation Orchestrates Immunomodulation of the Biomineralized Collagen Matrix

Calcium phosphate-based biomineralized biomaterials have broad application prospects. However, the immune response and foreign body reactions elicited by biomineralized materials have drawn substantial attention recently, contrary to the immune microenvironment optimization concept. Therefore, it is important to clarify the immunomodulation properties of biomineralized materials. Herein, we prepared the biomineralized collagen matrix (BCM) and screened the key immunomodulation factor carboxymethyl chitosan/amorphous calcium phosphate (CMC/ACP) nanocomplex. The immunomodulation effect of the BCM was investigated in vitro and in vivo. The BCM triggered evident inflammatory responses and cascade foreign body reactions by releasing the CMC/ACP nanocomplex, which activated the potential TLR4-MAPK/NF-κB pathway, compromising the collagen matrix biocompatibility. By contrast, blocking the CMC/ACP nanocomplex release via the blood assimilation process of the BCM mitigated the inflammation and foreign body reactions, enhancing biocompatibility. Hence, the immunomodulation of the BCM was orchestrated by the balance between the CMC/ACP nanocomplex and the blood assimilation process. Controlling the release of the CMC/ACP nanocomplex to accord the biological effects of ACP with the temporal regenerative demands is key to developing advanced biomineralized materials.

Nano-hydroxyapatite/natural polymer composite scaffolds for bone tissue engineering: a brief review of recent trend

Nanostructured inorganic biomaterial emerged as the most essential platform to address traumatic and non-traumatic conditions of hard tissues in the current scenario. Synthetic inorganic biomaterials serve as an efficient and pathogen-free choice that overcomes the obstructions associated with autografts and allografts to promote new tissue regeneration, since nano-hydroxyapatite (nHAp) is a biomaterial that mimics the natural mineral composition of bones and teeth of human hard tissues, which is widely employed in orthopedics and dentistry. The nHAp-based materials exhibit bioactive, biocompatible, and osteoconductive features under in vitro and in vivo conditions. The brittle nature of synthetic nHAp leads to weak mechanical properties, which eventually confines the utility of nHAp in load-bearing applications. Hence, this review focuses on the recent trends in the fabrication and investigation of nHAp-based polymer nanocomposite scaffolds for bone regeneration. Employing different polymers and fabrication strategies would efficiently tailor the physicochemical properties, and tailor-made mechanical properties in competence with biodegradation, thereby enhancing their potential in biomedical utility, and exploring their efficacy under in vitro and in vivo conditions to make "HAp-based smart-biomaterials" for bone tissue engineering.

Functionalized 3D-Printed PLA Biomimetic Scaffold for Repairing Critical-Size Bone Defects

The treatment of critical-size bone defects remains a complicated clinical challenge. Recently, bone tissue engineering has emerged as a potential therapeutic approach for defect repair. This study examined the biocompatibility and repair efficacy of hydroxyapatite-mineralized bionic polylactic acid (PLA) scaffolds, which were prepared through a combination of 3D printing technology, plasma modification, collagen coating, and hydroxyapatite mineralization coating techniques. Physicochemical analysis, mechanical testing, and in vitro and animal experiments were conducted to elucidate the impact of structural design and microenvironment on osteogenesis. Results indicated that the PLA scaffold exhibited a porosity of 84.1% and a pore size of 350 μm, and its macrostructure was maintained following functionalization modification. The functionalized scaffold demonstrated favorable hydrophilicity and biocompatibility and promoted cell adhesion, proliferation, and the expression of osteogenic genes such as ALP, OPN, Col-1, OCN, and RUNX2. Moreover, the scaffold was able to effectively repair critical-size bone defects in the rabbit radius, suggesting a novel strategy for the treatment of critical-size bone defects.

Magnesium (Mg2 +), Strontium (Sr2 +), and Zinc (Zn2 +) Co-substituted Bone Cements Based on Nano-hydroxyapatite/Monetite for Bone Regeneration

New bone cement type that combines Sr2 + /Mg2 + or Sr2 + /Zn2 + co-substituted nano-hydroxyapatite (n-HAs) with calcium phosphate dibasic and chitosan/gelatin polymers was developed to increase adhesion and cellular response. The cements were physicochemically described and tested in vitro using cell cultures. All cements exhibited quite hydrophilic and had high washout resistance. Cement releases Ca2 + , Mg2 + , Sr2 + , and Zn2 + in concentrations that are suitable for osteoblast proliferation and development. All of the cements stimulated cell proliferation in fibroblasts, endothelial cells, and osteoblasts, were non-cytotoxic, and produced apatite. Cements containing co-substituted n-HAs had excellent cytocompatibility, which improved osteoblast adhesion and cell proliferation. These cements had osteoinductive potential, stimulating extracellular matrix (ECM) mineralization and differentiation of MC3T3-E1 cells by increasing ALP and NO production. The ions Ca2 + , Mg2 + , Zn2 + , and Sr2 + appear to cooperate in promoting osteoblast function. The C3 cement (HA-SrMg5%), which was made up of n-HA co-substituted with 5 mol% Sr and 5 mol% Mg, showed exceptional osteoinductive capacity in terms of bone regeneration, indicating that this new bone cement could be a promising material for bone replacement.

Sustained release of brimonidine from polydimethylsiloxane-coating silicone rubber implant to reduce intraocular pressure in glaucoma

Glaucoma is the leading cause of irreversible blindness, affecting 111 million people by 2040 worldwide. Intraocular pressure (IOP) is the only controllable risk factor for the disease and current treatment options seek to reduce IOP via daily taking eye drops. However, shortcomings of eye drops, such as poor bioavailability and unsatisfied therapeutic effects, may lead to inadequate patient compliance. In this study, an effective brimonidine (BRI)-loaded silicone rubber (SR) implant coated with polydimethylsiloxane (BRI@SR@PDMS) is designed and fully investigated for IOP reduction treatment. The in vitro BRI release from BRI@SR@PDMS implant reveals a more sustainable trend lasting over 1 month, with a gradually declined immediate drug concentration. The carrier materials show no cytotoxicity on human corneal epithelial cells and mice corneal epithelial cells in vitro. After administrated into rabbit's conjunctival sac, the BRI@SR@PDMS implant releases BRI in a sustained fashion and effectively reduces IOP for 18 days with great biosafety. In contrast, BRI eye drops only maintain IOP-lowering effect for 6 h. Therefore, as a substitute of eye drops, the BRI@SR@PDMS implant can be applied as a promising non-invasive platform to achieve long-term IOP-lowering in patients suffering from ocular hypertension or glaucoma.

Scaffold-based bone tissue engineering in microgravity: potential, concerns and implications

One of humanity's greatest challenges is space exploration, which requires an in-depth analysis of the data continuously collected as a necessary input to fill technological gaps and move forward in several research sectors. Focusing on space crew healthcare, a critical issue to be addressed is tissue regeneration in extreme conditions. In general, it represents one of the hottest and most compelling goals of the scientific community and the development of suitable therapeutic strategies for the space environment is an urgent need for the safe planning of future long-term manned space missions. Osteopenia is a commonly diagnosed disease in astronauts due to the physiological adaptation to altered gravity conditions. In order to find specific solutions to bone damage in a reduced gravity environment, bone tissue engineering is gaining a growing interest. With the aim to critically investigate this topic, the here presented review reports and discusses bone tissue engineering scenarios in microgravity, from scaffolding to bioreactors. The literature analysis allowed to underline several key points, such as the need for (i) biomimetic composite scaffolds to better mimic the natural microarchitecture of bone tissue, (ii) uniform simulated microgravity levels for standardized experimental protocols to expose biological materials to the same testing conditions, and (iii) improved access to real microgravity for scientific research projects, supported by the so-called democratization of space.

Development and evaluation of bioactive 3D zein and zein/nano-hydroxyapatite scaffolds for bone tissue engineering application

The aim of this study is to generate and investigate biodegradable and biocompatible zein and zein/nano-hydroxyapatite composite scaffolds for bone defect healing. 3D zein scaffold was successfully fabricated using the salt-leaching method and incorporated with 12.5 wt% nHA for osteogenic differentiation of murine myoblast cell line (C2C12 cells). The scaffolds were subjected to physicochemical and biomechanical characterizations using the scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), biodegradation, porosity, mechanical tests. C2C12 cells were cultured on scaffolds and incubated for 21 days. Cell proliferation was detected by the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay. Quantitative real-time PCR was used to test the expression of osteoblastic-related genes including Runx2, ALP, and Col1A1. The scaffolds had an adequate mean pore size and a total porosity of 61.1%–70.6%. The addition of 12.5 wt% nHA to the zein scaffold increased the compressive modulus to 79.1 MPa and the ultimate strength to 2.7 MPa. The qRT-PCR analysis confirmed that mRNA transcript levels were significantly higher ( p < 0.05) on the zein/nHA than on the pure zein scaffold. The results suggested that the developed scaffolds could be a potential candidate for bone tissue engineering due to their promising osteoinductivity, surface topography, mechanical behavior, biodegradability.

A Biomimetic Platelet-Rich Plasma-Based Interpenetrating Network Printable Hydrogel for Bone Regeneration

Repair of bone defects caused by trauma or diseases is the primary focus of prosthodontics. Hydrogels are among the most promising candidates for bone tissue regeneration due to their unique features such as excellent biocompatibility, similarities to biological tissues, and plasticity. Herein, we developed a type of novel biomimetic interpenetrating polymeric network (IPN) hydrogel by combining methacrylated alginate and 4-arm poly (ethylene glycol)-acrylate (4A-PEGAcr) through photo-crosslinking. Platelet-rich plasma (PRP), a patient-specific source of autologous growth factors, was incorporated into the hydrogel, and thereafter the hydrogels were biological mineralized by simulated body fluid (SBF). Physical properties of hydrogels were comprehensively characterized. In vitro studies demonstrated that the incorporation of PRP and biomineralization promoted the biocompatibility of hydrogel. Strikingly, the osteogenic bioactivities, including ALP activity, mineralized nodule formation, and expression of osteogenic markers were found substantially enhanced by this biomineralized PRP-hydrogel. Finally, a rabbit model of bone defect was employed to assess in vivo bone regeneration, micro-CT analysis showed that the biomineralized PRP-hydrogels could significantly accelerate bone generation. We believed that this novel biomineralized PRP-incorporated IPN hydrogel could be promising scaffolds for bone tissue regeneration.

Characterization of non-solvent- and thermal-induced phase separation applied polycaprolactone/demineralized bone matrix scaffold for bone tissue engineering

Objective

Polycaprolactone (PCL) is a widely applied biomaterial in bone tissue engineering (BTE) due to its superior mechanical properties and biodegradability. However, the high hydrophobicity and low cell adhesion properties of PCL show limited cell interactions. Herein, we prepared the porous PCL/DBP composites with improved cell adhesion through the addition of demineralized bone powder (DBP). Three-dimensional scaffolds were fabricated by mixing various concentrations of DBP with PCL and applying non-solvent-induced phase separation (NIPS) and thermal-induced phase separation (TIPS) (N-TIPS) and solvent casting and particulate leaching (SCPL) to impart porosity.

Methods

A characteristic evaluation was performed through X-ray diffraction (XRD), morphological analysis, physicochemical analysis, bioactivity test, and mechanical test. Upon culture with mouse bone marrow stem cells (mBMSCs), proliferation and osteogenic differentiation of mBMSC were evaluated using quantitative dsDNA analysis and alkaline phosphatase (ALP) activity, respectively.

Results

The addition of DBP improved the physicochemical and mechanical properties of the scaffold and formed a large amount of hydroxyapatite (HAp). Also, cell proliferation and differentiation were increased by enhancing cell adhesion.

Conclusion

The porous PCL/DBP scaffolds could provide a favorable microenvironment for cell adhesion and be a promising biomaterial model for bone tissue engineering.

Graphical abstract

Collagen and nano-hydroxyapatite interactions in alginate-based microcapsule provide an appropriate osteogenic microenvironment for modular bone tissue formation

The addition of nano-hydroxyapatite (nHA) and collagen (Col) to the alginate (Alg) microcapsule hydrogel reduced swelling and degradation ratios while the compressive strength increased compared to Alg, Alg-Col, and Alg-nHA groups. MTT assay and Calcein-AM staining revealed an enhanced MG-63 osteoblasts viability in the Alg-nHA-Col hydrogel compared to the other groups. SEM showed the attachment of MG-63 osteoblasts inside Alg-Col hydrogels. Non-significant differences were found in antioxidant capacity of cells inside the Alg-nHA-Col hydrogel compared to the Alg group. Hematoxylin-Eosin staining showed the distribution of MG-63 osteoblasts inside microspheres. Calcium deposits, alkaline phosphatase (ALP) activity with the increase of intracellular calcium were found in Alg-nHA-Col group. Western blotting showed that levels of osteocalcin, ColA2, Sox-9, and ColA1 also significantly increased compared to the Alg, Alg-Col, Alg-nHA groups. The present study demonstrated that the addition of mineral nHA and protein (Col) into the Alg improves osteogenic potential and provides a 3D platform for modular bone tissue engineering.

In vitro biocompatiability and mechanical properties of bone adhesive tape composite based on poly(butyl fumarate)/poly(propylene fumarate)-diacrylate networks

Polyfumarate has been considered as injectable and biodegradable bone cement. However, its mechanical and degradation properties are particularly important. Therefore, the current study aimed to develop the properties by compositing poly (butyl fumarate)-based networks with hydroxyapatite nano-powders. In this regard, the poly (butyl fumarate) (PBF) matrix composite was compared with different components by evaluating their composition, mechanical properties, hydrophilicity, and biodegradability. Furthermore, their bioactivity in the phosphate-buffered saline (PBS) and, via applying mouse embryo osteoblast precursor cells (MC3T3-E1), their cell interaction, including adhesion, proliferation, and in vitro cytotoxicity assay, were assessed. The addition of hydroxyapatite improved the mechanical strength and modulus of PBF matrix composite. The composite reinforced with 3 wt% hydroxyapatite showed a higher lap-shear strength (1.68 MPa) and bonding strength (4.30 MPa), a maximum compression strength at fracture (95.18 MPa), modulus (925.29 MPa), and compression strength at yield (31.43 MPa), respectively. Also, hydrophilicity and in vitro degradation of the composite were enhanced in the presence of hydroxyapatite. In this condition, after a period of immersion (52 weeks) in PBS, the weight loss rate, and degradation rate of the composite increased. The composite proliferation, adhesion, and toxicity of MC3T3-E1 cells improved in comparison to the PBF matrix composite. Accordingly, controllable strength and degradation of the composite, along with its proven biocompatibility, make the composite a candidate for the treatment of comminuted fractures.

Fabrication method for a magnetically induced highly oriented nanohydroxyapatite/collagen composite

Both collagen fibres and nanohydroxyapatite crystals have anisotropic magnetisation, which allows them to be oriented by a high magnetic field. Highly oriented nanohydroxyapatite/collagen composites were prepared using a high magnetic field combined with in situ synthesis. These highly oriented composites were investigated and compared with conventional composites. The results showed that the collagen fibres in the magnetically induced highly oriented nanohydroxyapatite/collagen composites had a preferred orientation and smaller molecular spacing, while the nanohydroxyapatite crystals were tightly adhered along the collagen fibre surface. The magnetically induced composites exhibited superior resistance to swelling and degradation along with high compressive strength. This artificial composite, with a structure and composition similar to natural bone, represents a new idea for improving materials for vertical or horizontal bone augmentation.

Collagen/Nano-hydroxyapatite Composite Scaffold Application with Exchange Reamed Nailing Accelerates Bone Union and Improves Quality of Life in Atrophic Femoral Shaft Nonunions: A Retrospective Comparative Study

BACKGROUND

Our aim in this study was to evaluate the effect of exchange intramedullary nailing in femoral shaft atrophic nonunions and the use of collagen/nano-hydroxyapatite composite scaffold applied in addition to the cancellous iliac crest autograft on the union, return to work, and quality of life.

MATERIALS AND METHODS

Fifty-four patients with an atrophic nonunion in the isthmic region of the femoral shaft were included in the study. The patients were divided into two groups. Group A consisted of 24 patients who underwent collagen/nano-hydroxyapatite composite scaffold in addition to exchange intramedullary nailing and iliac autograft, while group B consisted of 30 patients without scaffold. Short Form-36 (SF-36) questionnaire scores, union rates, time to union, return to work were complications were compared.

RESULTS

Mean age of patients was 47.5 ± 14.1. The mean follow-up period was 3.56 ± 1.88 years. There was no statistically significant difference between Group A and B in terms of age, gender, smoking and alcohol use, and trauma mechanism. Time to union and return to work were statistically significantly shorter in Group A than in Group B (p = 0.004, p = 0.001). All of the SF-36 survey scores at month six were better in Group A. In the first year, mental health and general health perception were still statistically better in group A (p = 0.009, p = 0.008).

CONCLUSION

In the treatment of atrophic nonunions of the femoral shaft isthmic region, the use of collagen/nano-hydroxyapatite composite scaffolds together with exchange intramedullary nailing affects the union positively. This positive effect also brings about earlier return to work and better quality of life.

Angiogenic Potential of VEGF Mimetic Peptides for the Biofunctionalization of Collagen/Hydroxyapatite Composites

Currently, the focus on bioinspired concepts for the development of tissue engineering constructs is increasing. For this purpose, the combination of collagen (Coll) and hydroxyapatite (HA) comes closest to the natural composition of the bone. In order to confer angiogenic properties to the scaffold material, vascular endothelial growth factor (VEGF) is frequently used. In the present study, we used a VEGF mimetic peptide (QK) and a modified QK-peptide with a poly-glutamic acid tag (E7-QK) to enhance binding to HA, and analyzed in detail binding efficiency and angiogenic properties. We detected a significantly higher binding efficiency of E7-QK peptides to hydroxyapatite particles compared to the unmodified QK-peptide. Tube formation assays revealed similar angiogenic functions of E7-QK peptide (1µM) as induced by the entire VEGF protein. Analyses of gene expression of angiogenic factors and their receptors (FLT-1, KDR, HGF, MET, IL-8, HIF-1α, MMP-1, IGFBP-1, IGFBP-2, VCAM-1, and ANGPT-1) showed higher expression levels in HUVECs cultured in the presence of 1 µM E7-QK and VEGF compared to those detected in the negative control group without any angiogenic stimuli. In contrast, the expression of the anti-angiogenic gene TIMP-1 showed lower mRNA levels in HUVECs cultured with E7-QK and VEGF. Sprouting assays with HUVEC spheroids within Coll/HA/E7-QK scaffolds showed significantly longer sprouts compared to those induced within Coll/HA/QK or Coll/HA scaffolds. Our results demonstrate a significantly better functionality of the E7-QK peptide, electrostatically bound to hydroxyapatite particles compared to that of unmodified QK peptide. We conclude that the used E7-QK peptide represents an excellently suited biomolecule for the generation of collagen/hydroxyapatite composites with angiogenic properties.

Fabrication, characterization, and optimization of a novel copper-incorporated chitosan/gelatin-based scaffold for bone tissue engineering applications

Introduction: Fabricating composite scaffolds with improved physicochemical properties as artificial microenvironments are of great interest in bone tissue engineering. Given advantageous properties of nano-hydroxyapatite/chitosan/gelatin (nHA/Cs/Gel) scaffolds, the present study aimed to synthesize a modified nHA/Cs/Gel biomimetic scaffold with improved features. Methods: Pure and copper (Cu)-substituted nHA was synthesized using the chemical precipitation method under controlled pH and temperature. Pure and Cu-substituted nHA/Cs/Gel scaffolds were fabricated by salt-leaching/freeze-drying method. Physicochemical characteristics of nanoparticles and scaffolds were explored using XRD, FTIR, FE-SEM/EDX, and ICP. Besides, scaffold mechanical strength, degradation, porosity, swelling, biomineralization, and cytocompatibility were assessed. Results: Pure and Cu-substituted nHA were synthesized and characterized with appropriate Cu substitution and improved physical properties. All scaffolds were highly porous (porosity > 98%) and Cu incorporation reduced porosity from 99.555 ± 0.394% to 98.69 ± 0.80% while enlarged the pore size to more than100 µm. Cu-substitution improved the scaffold mechanical strength and the best result was observed in nHA.Cu5%/Cs/Gel scaffolds by the compressive strength 88.869 ± 19.574 MPa. Furthermore, 3% and 5% Cu-substituted nHA enhanced the scaffold structural stability and supported osteoblast spread, adhesion, survival, mineralization, and proliferation. Moreover, long-term and sustainable Cu release from scaffolds was observed within 28 days. Conclusion: Cu-substituted nHA/Cs/Gel scaffolds mimic the porous structure and mechanical strength of cancellous bone, along with prolonged degradation and Cu release, osteoblast attachment, viability, calcium deposition, and proliferation. Taken together, our results indicate the upgraded properties of nHA.Cu5%/Cs/Gel scaffolds for future applications in bone tissue engineering.

Wnt/β-Catenin Pathway Balances Scaffold Degradation and Bone Formation in Tissue-Engineered Laminae

Tissue engineering provides a promising way for the regeneration of artificial vertebral laminae. Previous studies have confirmed the feasibility of reconstructing vertebral laminae via hydroxyapatite-collagen I scaffolds and mesenchymal stromal cells. However, there were no studies exploring the degradation of hydroxyapatite-collagen I scaffolds and the function of Wnt/β-catenin pathway in the process. In this study, tissue-engineered laminae (TEL) were constructed by nanohydroxyapatite/collagen I scaffolds and umbilical cord Wharton's Jelly mesenchymal stromal cells (WJ-MSCs). Cell attachment was observed by scanning electron microscopy, and cell viability was confirmed by Live/Dead staining. The rat models were randomly divided into control and β-catenin inhibition groups. Vertebral lamina defect rat models were made on the fifth lumbar vertebrate, and TEL was implanted into the defect site. After 14 weeks, the newborn laminae were harvested for microcomputed tomography, histology, or transcriptional profile analysis. We found that, for the control group, the newborn lamina formation matched with the scaffold degradation and complete newborn laminae formed at the 14th week; for the β-catenin inhibition group, the scaffold degradation rate overrated the lamina formation and no complete artificial laminae were formed at the 14th week. In addition, the osteoclastic genes, such as Cathepsin K or RANKL, in the control groups were significantly lower than the β-catenin inhibition group, and the antiosteoclastic gene, OPG, in the control group was significantly higher than the β-catenin inhibition group. In conclusion, inhibition of Wnt/β-catenin pathway led to speedy scaffold degradation and deferred artificial lamina formation. Wnt/β-catenin pathway played a critical role in maintaining the balance between scaffold degradation and bone formation in the process of vertebral lamina reconstruction.

Bone Piezoelectricity-Mimicking Nanocomposite Membranes Enhance Osteogenic Differentiation of Bone Marrow Mesenchymal Stem Cells by Amplifying Cell Adhesion and Actin Cytoskeleton

Ferroelectric biomaterials have been widely investigated and demonstrated to enhance osteogenesis by simulating the inherent electrical properties of bone tissues. Nevertheless, the underlying biological processes are still not wellunderstood. Hence, this study investigated the underlying biological processes by which bone piezoelectricity-mimicking barium titanate/poly(vinylidene fluoride-trifluoroethylene) nanocomposite membranes (BTO nanocomposite membranes) promote osteogenesis of Bone Marrow Mesenchymal Stem Cells (BMSCs). Ourresults revealed that the piezoelectric coefficient (d₃₃) of nanocomposite membranes aftercontrolled corona poling was similar to that of native bone, and exhibited highly-stable piezoelectrical properties and concentrated surface electrical potential. These nanocomposite membranes significantly enhanced the adhesion and spreading of BMSCs, which was manifested as increased number and area of mature focal adhesions. Furthermore, the nanocomposite membranes significantly promoted the expression of integrin receptors genes (α1, α5 andβ3), which in turn enhanced osteogenesis of BMSCs, as manifested by upregulated Alkaline Phosphatase (ALP) and Bone Morphogenetic Protein 2 (BMP2) expression levels. Further investigations found that the Focal Adhesion Kinase (FAK)-Extracellular Signal-Regulated Kinase1/2 (ERK 1/2) signaling axis may be involved in the biological process of polarized nanocomposite membrane-induced osteogenesis. This study thus provides useful insights for betterunderstanding of the biological processes by which piezoelectric or ferroelectric biomaterials promote osteogenesis.

A novel degradable tricalcium silicate/calcium polyphosphate/polyvinyl alcohol organic-inorganic composite cement for bone filling

In this study, tricalcium silicate (C₃S) calcium/polyphosphate/polyvinyl alcohol organic-inorganic self-setting composites were successfully designed. A variety of tests were conducted to characterize their self-setting properties, mechanical properties, degradation properties, and related biological properties. The composite bone cements showed a short setting time (5.5-37.5 min) with a 5:5-6:4 ratio of C₃S/CPP to maintain a stable compressive strength (28 MPa). In addition, PVA effectively reduced the brittleness of the inorganic phase. Degradation experiments confirmed the sustainable surface degradation of bone cement. A maximum degradation rate of 49% was reached within 56 days, and the structure remained intact without collapse. Culturing MC3T3 cells with bone cement extracts revealed that the composite bone cements had excellent biological properties in vitro. The original extract showed a proliferation promotion effect on cells, whereas most of the other original extracts of degradable bone cements were toxic to the cells. Meanwhile, extracellular matrix mineralization and alkaline phosphatase expression showed remarkable effects on cell differentiation. In addition, a good level of adhesion of cells to the surfaces of materials was observed. Taken together, these results indicate that C₃S/CPP/PVA composite bone cements have great potential in bone defect filling for fast curing.

In vitro and in vivo study on the osseointegration of magnesium and strontium ion with two different proportions of mineralized collagen and its mechanism

To explore the optimal combination of Mg²⁺, Sr²⁺ and mineralized collagen (nHAC) with two different proportions of hydroxyapatite (HA) and collagen (COL) on differentiation of MC3T3-E1 and the underlying mechanism, as well as achieve bone osseointegration. MC3T3-E1 cells were cultured in a complete medium with Mg²⁺ at the concentration of 0, 4, 8, 12, 16, 20 mmol/L, Sr²⁺ at the concentration of 0, 3, 6, 12 mmol/L, and the impregnation solution of 3:7 and 5:5nHAC. The differentiation of MC3T3-E1 was measured by expression of osteogenic genes and proteins including Runx-2, BMP-2 and OCN and determined the activation of PI3K/AKT/GSK3β/β-catenin signaling pathway in 12 mmol/LMg²⁺+3 mmol/LSr²⁺+3:7nHAC group. Osteoporosis was induced in 18 female rats by means of ovariectomy, the implants were immersed in 60 mmol/LMg²⁺+15 mmol/LSr²⁺+3:7nHAC impregnation solution and implanted into the mesial alveolar fossa for immediate implantation. The osseointegration of the implants was observed by Confocal laser scanning microscopy (CLSM) and histology at 4 and 8 weeks. The groups cultured with 12 mmol/LMg²⁺, 3 mmol/LSr²⁺ and 3:7nHAC impregnation solution showed the osteogenic genes and proteins were significantly higher respectively (P < 0.05), as well as p-Akt, p-GSK3β and β-catenin proteins (P < 0.05). CLSM and histology showed that the implant surface was surrounded by thick lamellar bone plate, and the trabecular bone were dense and continuous in the impregnation solution. These results found that magnesium and strontium ion-loaded mineralized collagen play an critical role in up-regulating the cells activity through PI3K/AKT/GSK3β/β-catenin signaling pathway and could be promote the formation of osseointegration.

The Role of Marine Organic Extract in Bone Regeneration: A Pilot Study

Novel biomaterials capable of accelerating the healing process of skeletal tissues are urgently needed in dentistry. The present in vivo study assessed the osteoconductive and osteoinductive properties of experimental biphasic bioceramics (HA-TCP) modified or not by a nacre extract (marine organic extract, MOE) in a sheep model. Fabrication of MOE involved mixing ground nacre (0.05 g, particle sizes < 0.1 mm) with glacial ethanoic acid (5 mL, pH 7) for 72 hours using external magnetic stirring (25°C). Nonreactive carriers (sterile polythene tubes; 3/animal, radius: 2.5 mm, length: 10.0 mm) pertaining to the control (empty) or experimental groups (HA-TCP or MOE-modified HA-TCP) were implanted intramuscularly into the abdominal segment of the torso in sheep (n = 8, age: 2 years, weight: 45 kg). Euthanization of animals was performed at 3 and 6 months after surgery. Tissues harvested were subjected to macroscopic and radiographic assessments. Specimens were then stained for histological analysis. Both control and experimental animals were capable of inducing the neoformation of fibrous connective tissue at both time points where superior amounts of tissue formation and mineralization were detected for experimental groups (unaltered (at 3 and 6 mos) and MOE-modified HA-TCP (at 3 mos)). Histological results, however, revealed that mature bone formation was only observed for specimens fabricated with MOE-modified HA-TCP in a time-dependent manner. The present study has successfully demonstrated the in vivo utility of experimental biphasic bioceramics modified by MOE in an ectopic grafting sheep model. Promising osteoconductive and osteoinductive properties must be further developed and confirmed by subsequent research.

Establishment of Collagen: Hydroxyapatite/BMP-2 Mimetic Peptide Composites

Extensive efforts were undertaken to develop suitable biomaterials for tissue engineering (TE) applications. To facilitate clinical approval processes and ensure the success of TE applications, bioinspired concepts are currently focused on. Working on bone tissue engineering, we describe in the present study a method for biofunctionalization of collagen/hydroxyapatite composites with BMP-2 mimetic peptides. This approach is expected to be fundamentally transferable to other tissue engineering fields. A modified BMP-2 mimetic peptide containing a negatively charged poly-glutamic acid residue (E7 BMP-2 peptide) was used to bind positively charged hydroxyapatite (HA) particles by electrostatic attraction. Binding efficiency was biochemically detected to be on average 85% compared to 30% of BMP-2 peptide without E7 residue. By quartz crystal microbalance (QCM) analysis, we could demonstrate the time-dependent dissociation of the BMP-2 mimetic peptides and the stable binding of the E7 BMP-2 peptides on HA-coated quartz crystals. As shown by immunofluorescence staining, alkaline phosphatase expression is similar to that detected in jaw periosteal cells (JPCs) stimulated with the whole BMP-2 protein. Mineralization potential of JPCs in the presence of BMP-2 mimetic peptides was also shown to be at least similar or significantly higher when low peptide concentrations were used, as compared to JPCs cultured in the presence of recombinant BMP-2 controls. In the following, collagen/hydroxyapatite composite materials were prepared. By proliferation analysis, we detected a decrease in cell viability with increasing HA ratios. Therefore, we chose a collagen/hydroxyapatite ratio of 1:2, similar to the natural composition of bone. The following inclusion of E7 BMP-2 peptides within the composite material resulted in significantly elevated long-term JPC proliferation under osteogenic conditions. We conclude that our advanced approach for fast and cost-effective scaffold preparation and biofunctionalization is suitable for improved and prolonged JPC proliferation. Further studies should prove the functionality of composite scaffolds in vivo.

Piezoelectric Scaffolds as Smart Materials for Neural Tissue Engineering

Injury to the central or peripheral nervous systems leads to the loss of cognitive and/or sensorimotor capabilities, which still lacks an effective treatment. Tissue engineering in the post-injury brain represents a promising option for cellular replacement and rescue, providing a cell scaffold for either transplanted or resident cells. Tissue engineering relies on scaffolds for supporting cell differentiation and growth with recent emphasis on stimuli responsive scaffolds, sometimes called smart scaffolds. One of the representatives of this material group is piezoelectric scaffolds, being able to generate electrical charges under mechanical stimulation, which creates a real prospect for using such scaffolds in non-invasive therapy of neural tissue. This paper summarizes the recent knowledge on piezoelectric materials used for tissue engineering, especially neural tissue engineering. The most used materials for tissue engineering strategies are reported together with the main achievements, challenges, and future needs for research and actual therapies. This review provides thus a compilation of the most relevant results and strategies and serves as a starting point for novel research pathways in the most relevant and challenging open questions.