Genetic and Biochemical Investigation of Seed Fatty Acid Accumulation in Arabidopsis

As a vegetable oil, consisting principally of triacylglycerols, is the major storage form of photosynthetically-fixed carbon in oilseeds which are of significant agricultural and industrial value. Photosynthesis in chlorophyll-containing green seeds, along with photosynthesis in leaves and other green organs, generates ATP and reductant (NADPH and NADH) needed for seed fatty acid production. However, contribution of seed photosynthesis to fatty acid accumulation in seeds have not been well-defined. Here, we report the contribution of seed-photosynthesis to fatty acid production by probing segregating green (photosynthetically-competent) and non-green or yellow (photosynthetically-non-competent) seeds in siliques of an Arabidopsis chlorophyll synthase mutant. Using this mutant, we found that yellow seeds lacking photosynthetic capacity reached 80% of amounts of oil in green seeds at maturity. Combining this with studies using shaded siliques, we determined that seed-photosynthesis accounts for 20% and silique and leaf/stem photosynthesis each account for ~40% of the ATP and reductant for seed oil production. Transmission electron microscopy (TEM) and pyridine nucleotides and ATP analyses revealed that seed photosynthesis provides ATP and reductant for oil production mostly during early development, as evidenced by delayed oil accumulation in non-green seeds. Transcriptomic analyses suggests that the oxidative pentose phosphate pathway could be the source of carbon, energy and reductants required for fatty acid synthesis beyond the early stages of seed development.

Optimization of corn starch acetylation and succinylation using the extrusion process

Starch chemical modification can be used in order to obtain modified starches (MS) with low affinity to water. Acetylated and succinylated starches whose applications as food ingredient depend upon their degree of substitution (DS) may be produced by esterifying starch through the extrusion process (EP). The Food and Drug Administration recommends a DS of 0.2 and 0.05 for acetylated and succinylated starches, respectively. The objective of this study was to find mathematical models to obtain the optimum values of DS, Water absorption Index (WAI) and Water Solubility Index (WSI) for MS with safe-for-food-use DS and low affinity to water, modifying the starches by acetylation and succinylation using EP. The process variables were Barrel Temperature (BT, 80-160 °C), Screw Speed (SS, 100-200 rpm) and Reactant Concentration (RC, Acetylation, 0-13% and Succinylation, 0-3%). The best conditions to obtain acetylated starches were RC = 7.88%, BT = 80 °C and SS = 100 rpm, presenting values of DS = 0.2, WAI = 7.67 g/g and WSI = 6.15%. On the other hand, the optimum conditions to obtain succinylated starches were RC = 1.12%, BT = 80 °C and SS = 126 rpm, obtaining values of DS = 0.05, WAI = 3.40 g/g and WSI = 7.92%. These results showed that it is possible to obtain acetylated and succinylated MS with safe-for-food-use levels of DS and with low affinity to water, using EP.

Optimization of process parameters for preparation of rice extrudates from short and long Indica rice cultivars milled to varying degree of milling

Extrusion behavior of extrudates prepared from short (PR113) and long (PUSA1121) Indica rice cultivars milled to 0-8% degree of milling (DOM) extruded at variable extrusion temperature (150-190 °C) and feed moisture (15-19%) was studied. The physico-chemical and functional properties of extrudates prepared from both the cultivars varied significantly with variation in DOM as well as extrusion variables. DOM showed more pronounced effect for all the responses studied for both the cultivars. Expansion, L*, water absorption and overall acceptability increased whereas hardness, water solubility and bulk density decreased with increase in DOM. Extrusion temperature increase led to increase in expansion and water solubility and decreased L*, bulk density and water absorption. Feed moisture showed significant positive effect on hardness and water absorption and negative effect on expansion, L* and water solubility. Formation of amylose-lipid complexes were also observed during extrusion cooking for both the cultivars which showed negative correlation with DOM. Both the cultivars also showed different behavior for these responses at same values of independent variables.

Effects of incorporation of groundnut oil and hydrogenated fat on pasting and dough rheological properties of flours from wheat varieties

The effects of incorporation of groundnut oil (GO) and hydrogenated fat (HF) at different levels (1%, 3% and 5%) on pasting, dough rheology and mixing properties of strong wheat flour (SWF) and weak wheat flour (WWF) were evaluated. SWF showed higher paste viscosities as compared to WWF. However, higher setback viscosity for SWF than WWF was observed. Paste viscosity and mixograph peak time of both flours decreased with an increase in level of GO and HF. Pasting temperature of both flours decreased with an increase in GO. Storage modulus (G') was higher than loss modulus (G″) for dough from both SWF and WWF. G' increased while G″ decreased with an increase in levels of GO and HF. Dough prepared from SWF needed longer time for mixing and showed wider peak width, indicating strong and stable dough as compared to WWF. Addition of GO up to 3% level progressively decreased dough consistency and mixing tolerance and further addition led to an increase in both properties. Contrarily, addition of HF showed opposite effect in WWF. Both GO and HF showed variables effects towards mixing in both flour types. Dough tolerance and breakdown during mixing improved with increase in GO while adversely affected with increase in HF.

Effects of fatty acids composition and microstructure properties of fats and oils on textural properties of dough and cookie quality

This study was carried out to investigate the effect of fatty acid composition and microstructure properties of fats and oils on the textural properties of cookie dough and quality attributes of cookies. Fatty acid composition and microstructure properties of six fats and oils (butter, hydrogenated fat, palm oil, coconut oil, groundnut oil, and sunflower oil) were analyzed. Sunflower oil was found to be the most unsaturated oil with 88.39% unsaturated fatty acid content. Coconut oil and palm oil differed from other fats and oils by having an appreciable amount of lauric acid (59.36%) and palmitic acid (42.14%), respectively. Microstructure size of all fats and oils ranged from 1 to 20 μm being the largest for coconut oil and the smallest for palm oil. In palm oil, small rod-shaped and randomly arranged microstructures were observed, whereas sunflower oil and groundnut oil possessed large, scattered ovule shaped microstructures. It was reported that sunflower oil produced the softest dough, the largest cookie spread and the hardest cookie texture, whereas hydrogenated fat produced the stiffest dough, the lowest spread and most tender cookies. Statistical analysis depicted that palmitic acid and oleic acid demonstrated a positive correlation with dough hardness. Linoleic acid exhibited positive link with cookie spread ratio (r = 0.836**) and breaking strength (r = 0.792**). Microstructure size showed a significant positive relationship with dough density (r = 0.792**), cookie density (r = 0.386*), spread ratio (r = 0.312*), and breaking strength (r = 0.303*).

Effect of banana flour, screw speed and temperature on extrusion behaviour of corn extrudates

Effect of extrusion parameters (banana flour, screw speed, extrusion temperature) on extrusion behaviour of corn grit extrudates were studied. Second order quadratic equations for extrusion properties as function of banana flour (BF), screwspeed (SS) and extrusion temperature (ET) were computed. BF had predominant effect on the Hunter color (L*, a*, b*) parameters of the extrudates. Addition of BF resulted in corn extrudates with higher L* and lower a* and b* values. Higher ET resulted in dark colored extrudates with lower L* and a* value. Higher SS enhanced the lightness of the extrudates. Expansion of the extrudates increased with increase in the level of BF and ET. WAI of the extrudates decreased with BF whereas increased with SS. However, reversed effect of BF and SS on WSI was observed. Flextural strength of the extrudates increased with increase in SS followed by BF and ET. The addition of BF and higher ET resulted in extrudates with higher oil uptake.

Optimization of extrusion process for production of nutritious pellets

A blend of 50% Potato Starch (PS), 35% Quality Protein Maize (QPM), and 15% Soybean Meal (SM) were used in the preparation of expanded pellets utilizing a laboratory extruder with a 1.5 × 20.0 × 100.0 mm die-nozzle. The independent variables analyzed were Barrel Temperature (BT) (75-140 °C) and Feed Moisture (FM) (16-30%). The effect of extrusion variables was investigated in terms of Expansion Index (EI), apparent density (ApD), Penetration Force (PF) and Specific Mechanical Energy (SME), viscosity profiles, DSC, crystallinity by X-ray diffraction, and Scanning Electronic Microscopy (SEM). The PF decreased from 30 to 4 kgf with the increase of both independent variables (BT and FM). SME was affected only by FM, and decreased with the increase in this variable. The optimal region showed that the maximum EI was found for BT in the range of 123-140 °C and 27-31% for FM, respectively. The extruded pellets obtained from the optimal processing region were probably not completely degraded, as shown in the structural characterization. Acceptable expanded pellets could be produced using a blend of PS, QPM, and SM by extrusion cooking.

Crystallinity of lyophilised carrot cell wall components

The aim of this work was to investigate the effect of removal of cell wall components on the crystallinity of cell walls using X-ray diffraction. Various insoluble cell wall residues were prepared following a sequential extraction of carrot cell wall material. X-ray diffraction patterns were typical of cellulose although there was a possible contribution of pectic polysaccharides to the crystallinity. As more amorphous material was removed to produce a cellulose rich residue, the crystallinity index increased from 12 to 16%, larger than that estimated from cellulose alone. For the last residue treated with 4M KOH, a lower value of crystallinity was found (14%) which resulted from the change of some crystalline domains of cellulose into amorphous regions. Pressing conditions (temperature, water content) have been investigated and did not alter the crystallinity index significantly.