Oxidative stabilization of iso‐1‐cytochromecby redox‐inspired protein engineering

Protein Stability: Enhancement and Measurement

This chapter defines protein stability, emphasizes its importance, and surveys the field of protein stabilization, with summary reference to a selection of 2014-2021 publications. One can enhance stability, particularly by protein engineering strategies but also by chemical modification and by other means. General protocols are set out on how to measure a given protein's (i) kinetic thermal stability and (ii) oxidative stability and (iii) how to undertake chemical modification of a protein in solution.

Early modification of cytochrome c by hydrogen peroxide triggers its fast degradation

Cytochrome c (cyt c), in addition to its function as an electron shuttle in respiratory chain, is able to perform as a pseudo-peroxidase with a critical role during apoptosis. Incubation of cyt c with an excess of hydrogen peroxide leads to a suicide inactivation of the protein, which is accompanied by heme destruction and covalent modification of numerous amino acid residues. Although steady-state reactions of cyt c with an excess of hydrogen peroxide represent non-physiological conditions, they might be used for analysis of the first-modified amino acid in in vivo. Here, we observed oxidation of tyrosine residues 67 and 74 and heme as the first modifications found upon incubation with hydrogen peroxide. The positions of the oxidized tyrosines suggest a possible migration pathway of hydrogen peroxide-induced radicals from the site of heme localization to the protein surface. Analysis of a size of folded fraction of cyt c upon limited incubation with hydrogen peroxide indicates that the early oxidation of amino acids triggers an accelerated destruction of cyt c. Position of channels from molecular dynamics simulation structures of cyt c points to a location of amino acid residues exposed to reactive oxidants that are thus more prone to covalent modification.

Addition of new catalytic sites on the surface of versatile peroxidase for enhancement of LRET catalysis

Versatile peroxidase (VP) from Bjerkandera adusta is an enzyme able to oxidize bulky and high-redox substrates trough a Long-Range Electron Transfer (LRET) pathway. In this study, the introduction of radical-forming aromatic amino acids by chemical modification of the protein surface was performed, and the catalytic implications of these additional surface active-sites on the oxidation of 2,6-dimethylphenol, Mn²⁺ and Remazol Brilliant Blue R (RBBR) were determined. These three different substrates are oxidized in different active-sites of enzyme molecule, of which the high redox RBBR the only one that is transformed by an external radical formed on the protein surface. Both catalytic constants k_cat and K_M were significantly affected by the chemical modifications. Tryptophan- and tyrosine-modified VP showed higher catalytic transformation than the unmodified enzyme for RBBR, while the Mn²⁺ oxidation was significantly reduced by all chemical modifications. Electron Paramagnetic Resonance studies demonstrated the formation of additional protein-based radicals after the chemical modification with radical-forming amino acids. In addition, the catalytic rate of the LRET-mediated transformation showed a good correlation with the ionization energy of the additional amino acid on the protein surface.

Protein Stability: Enhancement and Measurement

This article defines protein stability, emphasizes its importance and surveys the field of protein stabilization, with summary reference to a selection of 2009-2015 publications. One can enhance stability by, in particular, protein engineering strategies and by chemical modification (including conjugation) in solution. General protocols are set out on how to measure a given protein's (1) kinetic thermal stability, and (2) oxidative stability, and (3) how to undertake chemical modification of a protein in solution.

Process development for oxidations of hydrophobic compounds applying cytochrome P450 monooxygenases in-vitro

Cytochrome P450 monooxygenases are a unique family of enzymes that are able to catalyze regio- and stereospecific oxidations for a broad substrate range. However, due to limited enzyme activities and stabilities, hydrophobicity of substrates, as well as the necessity of a continuous electron and oxygen supply the implementation of P450s for industrial processes remains challenging. Aim of this study was to point out key aspects for the development of an efficient synthesis concept for cytochrome P450 catalyzed oxidations. In order to regenerate the natural cofactor NADPH, a glucose dehydrogenase was applied. The low water soluble terpene α-ionone was used as substrate for the model reaction system. The studies reveal that an addition of surfactants in combination with low volumetric amounts of co-solvent can significantly increase substrate availability and reaction rates. Furthermore, these additives facilitated a reliable sampling procedure during the process. Another key factor for the process design was the oxygen supply. Based on various investigations, a bubble-aerated stirred tank reactor in batch mode represents a promising reactor concept for P450 oxidations. Main restriction of the investigated reaction system was the low process stability of the P450 monooxygenase, characterized by maximum total turnover numbers of ∼4100molα-ionone/molP450.

Improving the oxidative stability of a high redox potential fungal peroxidase by rational design

Ligninolytic peroxidases are enzymes of biotechnological interest due to their ability to oxidize high redox potential aromatic compounds, including the recalcitrant lignin polymer. However, different obstacles prevent their use in industrial and environmental applications, including low stability towards their natural oxidizing-substrate H₂O₂. In this work, versatile peroxidase was taken as a model ligninolytic peroxidase, its oxidative inactivation by H₂O₂ was studied and different strategies were evaluated with the aim of improving H₂O₂ stability. Oxidation of the methionine residues was produced during enzyme inactivation by H₂O₂ excess. Substitution of these residues, located near the heme cofactor and the catalytic tryptophan, rendered a variant with a 7.8-fold decreased oxidative inactivation rate. A second strategy consisted in mutating two residues (Thr45 and Ile103) near the catalytic distal histidine with the aim of modifying the reactivity of the enzyme with H₂O₂. The T45A/I103T variant showed a 2.9-fold slower reaction rate with H₂O₂ and 2.8-fold enhanced oxidative stability. Finally, both strategies were combined in the T45A/I103T/M152F/M262F/M265L variant, whose stability in the presence of H₂O₂ was improved 11.7-fold. This variant showed an increased half-life, over 30 min compared with 3.4 min of the native enzyme, under an excess of 2000 equivalents of H₂O₂. Interestingly, the stability improvement achieved was related with slower formation, subsequent stabilization and slower bleaching of the enzyme Compound III, a peroxidase intermediate that is not part of the catalytic cycle and leads to the inactivation of the enzyme.

Kinetic and thermodynamic characterization of the functional properties of a hybrid versatile peroxidase using isothermal titration calorimetry: Insight into manganese peroxidase activation and lignin peroxidase inhibition

Isothermal titration calorimetry (ITC) was developed for measuring lignin peroxidase (LiP) and manganese peroxidase (MnP) activities of versatile peroxidase (VP) from Bjerkandera adusta. Developing an ITC approach provided an alternative to colorimetric methods that enabled reaction kinetics to be accurately determined. Although VP from Bjerkandera adjusta is a hybrid enzyme, specific conditions of [Mn+2] and pH were defined that limited activity to either LiP or MnP activities, or enabled both to be active simultaneously. MnP activity was found to be more efficient than LiP activity, with activity increasing with increasing concentrations of Mn+2. These properties of MnP were explained by a second metal binding site involved in homotropic substrate (Mn+2) activation. The activation of MnP was also accompanied by a decrease in both activation energy and substrate (Mn) affinity, reflecting a flexible enzyme structure. In contrast to MnP activity, LiP activity was inhibited by high dye (substrate) concentrations arising from uncompetitive substrate inhibition caused by substrate binding to a site distinct from the catalytic site. Our study provides a new level of understanding about the mechanism of substrate regulation of catalysis in VP from B. adjusta, providing insight into a class of enzyme, hybrid class II peroxidases, for which little experimental data is available.

Engineering protein stability

This article defines protein stability, emphasizes its importance and surveys some notable recent publications (2004-2008) in the field of protein stability/stabilization. Knowledge of the factors stabilizing proteins has emerged from denaturation studies and from study of thermophilic (and other extremophilic) proteins. One can enhance stability by protein engineering strategies, the judicious use of solutes and additives, immobilization, and chemical modification in solution. General protocols are set out on how to measure the kinetic thermal stability of a given protein and how to undertake chemical modification of a protein in solution.

Ascorbate peroxidase activity of cytochrome c

The peroxidase-type reactivity of cytochrome c is proposed to play a role in free radical production and/or apoptosis. This study describes cytochrome c catalysis of peroxide consumption by ascorbate. Under conditions where the sixth coordination position at the cytochrome c heme iron becomes more accessible for exogenous ligands (by carboxymethylation, cardiolipin addition or by partial denaturation with guanidinium hydrochloride) this peroxidase activity is enhanced. A reaction intermediate is detected by stopped-flow UV-vis spectroscopy upon reaction of guanidine-treated cytochrome c with peroxide, which resembles the spectrum of globin Compound II species and is thus proposed to be a ferryl species. The ability of physiological levels of ascorbate (10-60 µM) to interact with this species may have implications for mechanisms of cell signalling or damage that are based on cytochrome c/peroxide interactions.

Protein engineering of redox-active enzymes

Redox-active enzymes perform many key biological reactions. The electron transfer process is complex, not only because of its versatility, but also because of the intricate and delicate modulation exerted by the protein scaffold on the redox properties of the catalytic sites. Nowadays, there is a wealth of information available about the catalytic mechanisms of redox-active enzymes and the time is propitious for the development of projects based on the protein engineering of redox-active enzymes. In this review, we aim to provide an updated account of the available methods used for protein engineering, including both genetic and chemical tools, which are usually reviewed separately. Specific applications to redox-active enzymes are mentioned within each technology, with emphasis on those cases where the generation of novel functionality was pursued. Finally, we focus on two emerging fields in the protein engineering of redox-active enzymes: the construction of novel nucleic acid-based catalysts and the remodeling of intra-molecular electron transfer networks. We consider that the future development of these areas will represent fine examples of the concurrence of chemical and genetic tools.

Photoinduced reduction of catalytically and biologically active Ru(ii)bisterpyridine–cytochrome c bioconjugates

Ruthenium(II)bisterpyridine chromophores were covalently linked to iso-1 cytochrome c from yeast to create light-activated donor-acceptor bioconjugates.